Subversion Repositories openrisc

[Readline-specific changelog.  Descriptions of changes to the source are
 found in the bash changelog.]

                                    6/9
                                    ---
Makefile.in
        - quote value of ${INSTALL_DATA} when passing it to makes in
          subdirectories

                                    7/1
                                    ---
Makefile.in
        - don't pass INSTALL_DATA to a make in the `doc' subdirectory; let
          autoconf set the value itself in the Makefile
        - removed a stray `-' before $(RANLIB) in the `install' recipe

doc/Makefile.in
        - add a VPATH assignment so the documentation is not remade if it's
          already up-to-date in the distribution

configure.in
        - call AC_SUBST(LOCAL_LDFLAGS), since Makefile.in contains
          @LOCAL_LDFLAGS@

                                    7/9
                                    ---

config.h.in
        - add define lines for STRUCT_WINSIZE_IN_SYS_IOCTL and
          STRUCT_WINSIZE_IN_TERMIOS

configure.in
        - call BASH_STRUCT_WINSIZE to look for the definition of
          `struct winsize'

                                   7/17
                                   ----
configure.in
        - call AC_MINIX

config.h.in
        - add define line for AC_MINIX

                                   7/18
                                   ----
Makefile.in
        - add `install-shared' and `uninstall-shared' targets

                                    8/4
                                    ---
Makefile.in
        - install and uninstall libhistory.a in the `install' and
          `uninstall' targets

                                    9/4
                                    ---
configure.in
        - bumped LIBVERSION up to 2.1.1, indicating that this is patch
          level 1 to release 2.1


                                   9/16
                                   ----
Makefile.in
        - `make distclean' now descends into the `examples' subdir

doc/Makefile.in
        - the `distclean' and `maintainer-clean' targets should remove
          Makefile

examples/Makefile.in
        - added the various clean targets

                                    4/2
                                    ---
configure.in
        - bumped LIBVERSION up to 2.2

                                   4/18
                                   ----
[readline-2.2 released]

                                   4/20
                                   ----
Makefile.in
        - make `libhistory.a' a dependency of `install'
        - fixed a typo in the recipe for `install' that copied libreadline.a
          to libhistory.old right after installing it

                                   4/27
                                   ----
doc/Makefile.in
        - install {readline,history}.info out of the source directory if
          they are not found in the current (build) directory -- only an
          issue if the libraries are built in a different directory than
          the source directory

                                    5/1
                                    ---
support/shobj-conf
        - script from the bash distribution to do shared object and library
          configuration

shlib/Makefile.in
        - new directory and makefile to handle building shared versions of
          libreadline and libhistory, controlled by support/shobj-conf

                                    5/7
                                    ---
doc/Makefile.in
        - set SHELL to /bin/sh, rather than relying on make to be correct

                                   5/14
                                   ----
savestring.c
        - new file, moved from shell.c, for backwards compatibility

Makefile.in, shlib/Makefile.in
        - make sure savestring.c is compiled and added to libreadline and
          libhistory

[THERE ARE NO MORE #ifdef SHELL LINES IN THE C SOURCE FILES.]

                                   5/15
                                   ----
README
        - updated description of shared library creation for the new scheme

[THERE ARE NO MORE #ifdef SHELL LINES IN ANY OF THE SOURCE FILES.]

Makefile.in
        - bumped SHLIB_MAJOR up to 4 since we've augmented the library
          API
        - rlconf.h is now one of the installed headers, so applications can
          find out whether things like vi-mode are available in the installed
          libreadline

                                   5/20
                                   ----
configure.in
        - changed RL_LIBRARY_VERSION to 4.0 to match the version of the
          installed shared libraries

                                    6/5
                                    ---
rlstdc.h
        - new file

Makefile.in
        - rlstdc.h is now one of the installed headers

                                    8/3
                                    ---
shlib/Makefile.in
        - made the suffix rule that creates xx.so from xx.c write the
          compiler output to `a.o', which is then mv'd to xx.so, because
          some compilers (Sun WSpro 4.2, for example) don't allow any
          suffixes other than `.o' for `cc -c' (not even `a.out')

                                   9/15
                                   ----

Makefile.in
        - AR and ARFLAGS are now substituted by configure, used in recipes
          that build the libraries

configure.in
        - use AC_CHECK_PROG to check for ar
        - set ARFLAGS if it has not already been set in the environment

                                   10/5
                                   ----
Makefile.in
        - removed savestring.o from object file list

                                   10/28
                                   -----
shlib/Makefile.in
        - don't use a fixed filename in the .c.so suffix rule to avoid
          problems with parallel makes

                                   12/21
                                   -----
support/shlib-install
        - new script to install shared readline and history libraries

shlib/Makefile.in
        - changed to call shlib-install for install and uninstall targets

[readline-4.0-beta1 frozen]

                                   12/22
                                   -----
configure.in
        - call AC_SUBST for SHOBJ_XLDFLAGS and SHLIB_LIBS

shlib/Makefile.in
        - SHOBJ_XLDFLAGS and SHLIB_LIBS are now substituted by configure
        - add $(SHLIB_LIBS) at end of command line that builds the shared
          libraries (currently needed only by AIX 4.2)

                                   12/31
                                   -----
MANIFEST, MANIFEST.doc
        - the TOC html files are no longer generated and no longer part of
          the distribution

                                 2/18/1999
                                 ---------
configure.in
        - set MAKE_SHELL to /bin/sh and substitute into the Makefiles

Makefile.in,{doc,examples,shlib}/Makefile.in
        - set SHELL from @MAKE_SHELL@

[readline-4.0 released]

                                   3/11
                                   ----
doc/Makefile.in
        - removed references to HTMLTOC, since separate HTML table-of-contents
          files are no longer created

examples/Makefile.in
        - remove `*.exe' in clean target for MS-DOS

Makefile.in
        - make `readline' target depend on ./libreadline.a
        - configure now substitutes TERMCAP_LIB into Makefile.in
        - use ${TERMCAP_LIB} instead of -ltermcap in recipe for `readline'
        - clean target now removes readline and readline.exe in case they
          get built

configure.in
        - use `pwd.exe' to set BUILD_DIR on MS-DOS DJGPP

                                   3/15
                                   ----
support/shlib-install
        - Irix 5.x and Irix 6.x should install shared libraries like Solaris 2
        - changes for installing on hp-ux 1[01].x

                                   3/23
                                   ----
configure.in
        - make sure that the $CC argument to shobj-conf is quoted

                                    4/8
                                    ---

xmalloc.h, rlprivate.h, rlshell.h
        - new files

Makefile.in,shlib/Makefile.in
        - add dependencies on xmalloc.h, rlshell.h
        - add xmalloc.h, rlprivate.h, rlshell.h to list of header files

MANIFEST
        - add xmalloc.h, rlprivate.h, rlshell.h

                                    4/9
                                    ---
Makefile.in,shlib/Makefile.in
        - add dependencies on rlprivate.h

                                   4/13
                                   ----
doc/Makefile.in
        - add variable, PSDVI, which is the desired resolution of the
          generated postscript files.  Set to 300 because I don't have
          any 600-dpi printers
        - set LANGUAGE= before calling makeinfo, so messages are in English
        - add rluserman.{info,dvi,ps,html} to appropriate variables
        - add rules to create rluserman.{info,dvi,ps,html}
        - install and uninstall rluserman.info, but don't update the directory
          file in $(infodir) yet

MANIFEST
        - add doc/rluserman.{texinfo,info,dvi,ps,html}

                                   4/30
                                   ----
configure.in
        - updated library version to 4.1

                                    5/3
                                    ---
configure.in
        - SHLIB_MAJOR and SHLIB_MINOR shared library version numbers are
          constructed from $LIBRARY_VERSION and substituted into Makefiles

                                    5/5
                                    ---
support/shlib-install
        - OSF/1 installs shared libraries like Solaris

Makefile.in
        - broke the header file install and uninstall into two new targets:
          install-headers and uninstall-headers
        - install and uninstall depend on install-headers and uninstall-headers
          respectively
        - changed install-shared and uninstall-shared targets to depend on
          install-headers and uninstall-headers, respectively, so users may
          choose to install only the shared libraries.  I'm not sure about
          the uninstall one yet -- maybe it should check whether or not
          the static libraries are installed and not remove the header files
          if they are

                                    9/3
                                    ---
configure.in, config.h.in
        - added test for memmove (for later use)
        - changed version to 4.1-beta1

                                   9/13
                                   ----
examples/rlfe.c
        - Per Bothner's `rlfe' readline front-end program

examples/Makefile.in
        - added rules to build rlfe

                                   9/21
                                   ----
support/shlib-install
        - changes to handle FreeBSD-3.x elf or a.out shared libraries, which
          have different semantics and need different naming conventions

                                 1/24/2000
                                 ---------
doc/Makefile.in
        - remove *.bt and *.bts on `make clean'

                                    2/4
                                    ---


configure.in
        - changed LIBVERSION to 4.1-beta5

                                 3/17/2000
                                 ---------
[readline-4.1 released]

                                   3/23
                                   ----
Makefile.in
        - remove the `-t' argument to ranlib in the install recipe; some
          ranlibs don't have it and attempt to create a file named `-t'

                                   3/27
                                   ----
support/shlib-install
        - install shared libraries unwritable by anyone on HP-UX
        - changed symlinks to relative pathnames on all platforms

shlib/Makefile.in
        - added missing `includedir' assignment, substituted by configure

Makefile.in
        - added missing @SET_MAKE@ so configure can set $MAKE appropriately

configure.in
        - add call to AC_PROG_MAKE_SET

                                   8/30
                                   ----
shlib/Makefile.in
        - change the soname bound into the shared libraries, so it includes
          only the major version number.  If it includes the minor version,
          programs depending on it must be rebuilt (which may or may not be
          a bad thing)

                                    9/6
                                    ---
examples/rlfe.c
        - add -l option to log input and output (-a option appends to logfile)
        - add -n option to set readline application name
        - add -v, -h options for version and help information
        - change a few things because getopt() is now used to parse arguments

                                   9/12
                                   ----
support/shlib-install
        - fix up the libname on HPUX 11

                                   10/18
                                   -----
configure.in
        - changed library version to 4.2-alpha

                                   10/30
                                   -----
configure.in
        - add -fsigned-char to LOCAL_CFLAGS for Linux running on the IBM
          S/390

Makefile.in
        - added new file, rltypedefs.h, installed by default with `make install'

                                   11/2
                                   ----
compat.c
        - new file, with backwards-compatibility function definitions

Makefile.in,shlib/Makefile.in
        - make sure that compat.o/compat.so are built and linked apppropriately

support/shobj-conf
        - picked up bash version, which means that shared libs built on
          linux and BSD/OS 4.x will have an soname that does not include
          the minor version number

                                   11/13
                                   -----
examples/rlfe.c
        - rlfe can perform filename completion for relative pathnames in the
          inferior process's context if the OS supports /proc/PID/cwd (linux
          does it OK, Solaris is slightly warped, none of the BSDs have it)

                                11/17/2000
                                ----------
[readline-4.2-alpha released]

                                   11/27
                                   -----
Makefile.in,shlib/Makefile.in
        - added dependencies for rltypedefs.h

shlib/Makefile.in
        - changed dependencies on histlib.h to $(topdir)/histlib.h

                                   1/22
                                   ----
configure.in
        - changed release version to 4.2-beta

                                    2/2
                                    ---
examples/Makefile.in
        - build histexamp as part of the examples

                                    2/5
                                    ---
doc/Makefile.in
        - don't remove the dvi, postscript, html, info, and text `objects'
          on a `make distclean', only on a `make maintainer-clean'

                                    3/6
                                    ---
doc/history.{0,3}, doc/history_3.ps
        - new manual page for history library

doc/Makefile.in
        - rules to install and uninstall history.3 in ${man3dir}
        - rules to build history.0 and history_3.ps

                                    4/2
                                    ---
configure.in
        - changed LIBVERSION to `4.2'

                                    4/5
                                    ---
[readline-4.2 frozen]

                                    4/9
                                    ---
[readline-4.2 released]

                                    5/2
                                    ---
Makefile.in,{doc,examples,shlib}/Makefile.in
        - added support for DESTDIR installation root prefix, to support
          building packages

doc/Makefile.in
        - add an info `dir' file entry for rluserman.info on `make install'
        - change man1ext to `.1' and man3ext to `.3'
        - install man pages with a $(man3ext) extension in the target directory
        - add support for installing html documentation if `htmldir' has a
          value

Makefile.in
        - on `make install', install from the `shlib' directory, too
        - on `make uninstall', uninstall in the `doc' and `shlib'
          subdirectories, too

support/shlib-install
        - add `freebsdelf*', `freebsdaout*', Hurd, `sysv4*', `sysv5*', `dgux*'
          targets for symlink creation

                                    5/7
                                    ---
configure.in, config.h.in
        - check for <limits.h>, define HAVE_LIMITS_H if found

                                    5/8
                                    ---
aclocal.m4
        - pick up change to BASH_CHECK_LIB_TERMCAP that adds check for
          libtinfo (termcap-specific portion of ncurses-5.2)

                                    5/9
                                    ---
configure.in
        - call AC_C_CONST to find out whether or not the compiler supports
          `const'

config.h.in
        - placeholder for `const' define, if any

                                   5/10
                                   ----
configure.in
        - fix AC_CHECK_PROG(ar, ...) test to specify right value for the
          case where ar is not found; should produce a better error message

                                   5/14
                                   ----
configure.in,config.h.in
        - check for vsnprintf, define HAVE_VSNPRINTF if found

                                   5/21
                                   ----
configure.in, config.h.in
        - add checks for size_t, ssize_t

                                   5/30
                                   ----
configure.in
        - update autoconf to version 2.50, use in AC_PREREQ
        - changed AC_INIT to new flavor
        - added AC_CONFIG_SRCDIR
        - AC_CONFIG_HEADER -> AC_CONFIG_HEADERS
        - call AC_C_PROTOTYPES
        - AC_RETSIGTYPE -> AC_TYPE_SIGNAL

                                   8/22
                                   ----
configure.in
        - updated the version number to 4.2a

Makefile.in,shlib/Makefile.in
        - make sure tilde.o is built -DREADLINE_LIBRARY when being built as
          part of the standalone library, so it picks up the right include
          files

                                   8/23
                                   ----
support/shlib-install
        - support for Darwin/MacOS X shared library installation

                                   9/24
                                   ----
examples/readlinebuf.h
        - a new file, a C++ streambuf interface that uses readline for I/O.
          Donated by Dimitris Vyzovitis <vyzo@media.mit.edu>

                                   10/9
                                   ----
configure.in
        - replaced call to BASH_HAVE_TIOCGWINSZ with AC_HEADER_TIOCGWINSZ

[readline-4.2a-beta1 frozen]

                                   10/15
                                   -----
configure.in, config.h.in
        - check for <memory.h>, define HAVE_MEMORY_H if found
        - check for <strings.h>, define HAVE_STRINGS_H if found

                                   10/18
                                   -----
configure.in, config.h.in
        - check for isascii, define HAVE_ISASCII if found

configure.in
        - changed the macro names from bash as appropriate:
                BASH_SIGNAL_CHECK -> BASH_SYS_SIGNAL_VINTAGE
                BASH_REINSTALL_SIGHANDLERS -> BASH_SYS_REINSTALL_SIGHANDLERS
                BASH_MISC_SPEED_T -> BASH_CHECK_SPEED_T

                                   10/22
                                   -----
configure.in
        - check for isxdigit with AC_CHECK_FUNCS

config.h.in
        - new define for HAVE_ISXDIGIT

                                   10/29
                                   -----
configure.in, config.h.in
        - check for strpbrk with AC_CHECK_FUNCS, define HAVE_STRPBRK if found

                                    11/1
                                    ----
Makefile.in
        - make sure DESTDIR is passed to install and uninstall makes in
          subdirectories
        - when saving old copies of installed libraries, make sure we use
          DESTDIR for the old installation tree

[readline-4.2a-rc1 frozen]

                                   11/2
                                   ----
Makefile.in, shlib/Makefile.in
        - don't put -I$(includedir) into CFLAGS

                                   11/15
                                   -----
[readline-4.2a released]

                                   11/20
                                   -----
examples/rlcat.c
        - new file

examples/Makefile.in
        - changes for rlcat

                                   11/28
                                   -----
configure.in
        - default TERMCAP_LIB to -lcurses if $prefer_curses == yes (as when
          --with-curses is supplied)

examples/Makefile.in
        - substitute @LDFLAGS@ in LDFLAGS assignment

                                   11/29
                                   -----
config.h.in
        - add necessary defines for multibyte include files and functions
        - add code to define HANDLE_MULTIBYTE if prerequisites are met

configure.in
        - call BASH_CHECK_MULTIBYTE

                                   12/14
                                   -----
config.h.in
        - add #undef PROTOTYPES, filled in by AC_C_PROTOTYPES

                                   12/17
                                   -----
config.h.in
        - moved HANDLE_MULTIBYTE code to rlmbutil.h

rlmbutil.h, mbutil.c
        - new files

Makefile.in, shlib/Makefile.in
        - added rules for mbutil.c

                                   12/20
                                   -----
configure.in
        - added --enable-shared, --enable-static options to configure to
          say which libraries are built by default (both default to yes)
        - if SHLIB_STATUS == 'unsupported', turn off default shared library
          building
        - substitute new STATIC_TARGET, SHARED_TARGET, STATIC_INSTALL_TARGET,
          and SHARED_INSTALL_TARGET

Makefile.in
        - `all' target now depends on (substituted) @STATIC_TARGET@ and
          @SHARED_TARGET@
        - `install' target now depends on (substituted) @STATIC_INSTALL_TARGET@
          and @SHARED_INSTALL_TARGET@

INSTALL, README
        - updated with new info about --enable-shared and --enable-static

                                 1/10/2002
                                 ---------
configure.in
        - bumped the library version number to 4.3

                                   1/24
                                   ----
Makefile.in,shlib/Makefile.in
        - changes for new file, text.c, with character and text handling
          functions from readline.c

                                   2/20
                                   ----
{configure.config.h}.in
        - call AC_C_CHAR_UNSIGNED, define __CHAR_UNSIGNED__ if chars are
          unsigned by default

                                   5/20
                                   ----
doc/Makefile.in
        - new maybe-clean target that removes the generated documentation if
          the build directory differs from the source directory
        - distclean target now depends on maybe-clean

                                   7/17
                                   ----
[readline-4.3 released]

                                   7/18
                                   ----
shlib/Makefile.in
        - fix bad dependency: text.so: terminal.c, make it depend on text.c

                                    8/7
                                    ---
support/shlib-install
        - break `linux' out into its own stanza:  it seems that linux
          distributions are all moving to the following scheme:

                libreadline.so.4.3      installed version
                libreadline.so.4 -> libreadline.so.4.3  symlink
                libreadline.so -> libreadline.so.4      symlink

                                   10/29
                                   -----
support/shlib-install
        - change INSTALL_LINK[12] to use `&&' instead of `;' so it only
          tries the link if the cd succeeds; put ${echo} in there, too
        - use $LN instead of `ln -s' so it works on machines without symlinks
        - change special linux stanza to use cd before ln also
        - change to use $INSTALL_LINK1 and $INSTALL_LINK2 appropriately
          instead of explicit commands in various stanzas

                                    2/1
                                    ---
config.h.in
        - add HAVE_MBRTOWC and HAVE_MBRLEN
        - add NO_MULTIBYTE_SUPPORT for new configure argument
        - add STDC_HEADERS

configure.in
        - new argument --enable-multibyte (enabled by default), allows
          multibyte support to be turned off even on systems that support it
        - add check for ansi stdc headers with call to AC_HEADER_STDC

                                    2/3
                                    ---
configure.in
        - add call to BASH_FUNC_CTYPE_NONASCII

config.h.in
        - add CTYPE_NON_ASCII

                                   2/20
                                   ----

doc/manvers.texinfo
        - renamed to version.texi to match other GNU software
        - UPDATE-MONTH variable is now `UPDATED-MONTH'
        
doc/{hist,rlman,rluserman}.texinfo
        - include version.texi
        
doc/{rltech,rluser,hstech,hsuser}.texi
        - changed the suffix from `texinfo' to `texi'

doc/Makefile.in
        - made appropriate changes for {{rl,hs}tech,{rl,hs}user}.texi

doc/{rlman,rluserman}.texinfo
        - changed the suffix from `texinfo' to `texi'

doc/hist.texinfo
        - renamed to history.texi to be more consistent

                                   6/11
                                   ----
shlib/Makefile.in
        - have configure substitute value of `@LDFLAGS@' into the assignment
          to SHLIB_XLDFLAGS

                                   6/16
                                   ----
configure.in
        - readline and history libraries are now at version 5.0

                                   8/18
                                   ----
support/shlib-install
        - support for FreeBSD-gnu (from Robert Millan)

                                   12/4
                                   ----
Makefile.in
        - add variables for localedir and the PACKAGE_* variables, auto-set
          by configure

                                   12/9
                                   ----
Makefile.in
        - use mkinstalldirs instead of mkdirs

                                   4/22
                                   ----
Makefile.in
        - separate doc install/uninstall out into two new targets:
          install-doc and uninstall-doc
        - make install-doc and uninstall-doc prerequisites of appropriate
          install and uninstall targets

examples/rl-fgets.c
        - new example from Harold Levy that wraps fgets replacement functions
          that call readline in a shared library that can be interposed with
          LD_PRELOAD

                                   7/27
                                   ----
[readline-5.0 released]

                                   11/15
                                   -----
examples/rlfe/{ChangeLog,Makefile.in,README,config.h.in,configure,configure.in,extern.h,os.h,pty.c,rlfe.c,screen.h}
        - new version of rlfe, rlfe-0.4, from Per Bothner; now a standalone
          application

                                   11/16
                                   -----
shlib/Makefile.in
        - substitute TERMCAP_LIB in from configure

configure.in
        - if SHLIB_LIBS doesn't include a termcap library (curses, ncurses,
          termcap, termlib), append the value of $TERMCAP_LIB to it

                                   11/30
                                   -----
configure.in
        - take out change from 11/16; it doesn't work for some systems (e.g.,
          SunOS 4.x and Solaris 2.6)
        - add support for --enable-purify configure argument
        - pass TERMCAP_LIB in environment when calling shobj-conf

examples/Makefile.in 
        - add support for building examples with purify

                                 1/23/2005
                                 ---------
configure.in
        - set BUILD_DIR to contain backslashes to escape any spaces in the
          directory name -- this is what make will accept in targets and
          prerequisites, so it's better than trying to use double quotes

                                   2/25
                                   ----
configure.in
        - change check for sys/ptem.h to include sys/stream.h if present, to
          avoid the `present but cannot be compiled' messages on Solaris and
          SVR4.2 (does anyone still use SVR4.2?)

                                    5/7
                                    ---
configure.in
        - add cross-compiling support from the bash configure.in, which cygwin
          and mingw have apparently adopted
        - add check for pwd.h, fcntl.h
        - add checks for fcntl, kill system calls
        - add checks for getpw{ent,nam,uid} C library functions
        - pass a compile-time option through to Makefiles if cross-compiling

config.h.in
        - add HAVE_PWD_H for <pwd.h>, HAVE_FCNTL_H for <fcntl.h>
        - add HAVE_FCNTL, HAVE_KILL for respective system calls
        - add HAVE_GETPW{ENT,NAM,UID} for passwd functions

Makefile.in,shlib/Makefile.in
        - @CROSS_COMPILE@ is substituted into DEFS (equal to -DCROSS_COMPILING
          if bash is being cross-compiled)

                                    8/2
                                    ---
examples/Makefile.in
        - use $(READLINE_LIB) instead of -lreadline to get around MacOS X 10.4's
          preference for (incompatible) shared libraries over static libraries
          in the load path

                                   8/11
                                   ----
support/shobj-conf
        - new variable: SHLIB_LIBPREF, prefix for shared library name (defaults
          to `lib'
        - new variable: SHLIB_DLLVERSION, used on Cygwin to set the library
          version number
        - new variable: SHLIB_DOT, separator character between library name and
          suffix and version information (defaults to `.')
        - new stanza for cygwin to generate windows-compatible dll

support/shlib-install
        - add new option `-b bindir' for systems like cygwin/windows that
          require it
        - new stanza for cygwin that installs a dll into $bindir and an implied
          link library into $libdir

configure.in
        - substitute new variables from shobj-conf

shlib/Makefile.in
        - substitute bindir, SHLIB_DOT, SHLIB_LIBPREF, SHLIB_DLLVERSION from
          configure
        - pass `-b $(bindir)' to shlib-install for install and uninstall targets
        - library names now use $SHLIB_LIBPREF and $SHLIB_DOT

INSTALL,README
        - document new SHLIB_DOT, SHLIB_LIBPREF, and SHLIB_DLLVERSION variables

                                   10/4
                                   ----
[readline-5.1-beta1 frozen]

                                   12/1
                                   ----
configure.in
        - changed release status to `release'

[readline-5.1 frozen]