OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-stable/] [newlib-1.18.0/] [libgloss/] [or32/] [sim-uart.cfg] - Rev 829

Compare with Previous | Blame | View Log

/* sim.cfg -- Simulator config file for use with Newlib
 *
 * Copyright (C) 2010, Embecosm Limited <info@embecosm.com>
 *  
 * Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>
 *
 * This file is part of Newlib.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the Free
 * Software Foundation; either version 2 of the License, or (at your option)
 * any later version.
 *
 * This program is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 * more details.
 *
 * You should have received a copy of the GNU General Public License along
 * with this program; if not, write to the Free Software Foundation, Inc., 675
 * Mass Ave, Cambridge, MA 02139, USA. */
/* -------------------------------------------------------------------------- */
/* This script is suitable for use with Or1ksim when used with newlib. There
 * are versions of this library which use a UART for input/output and a
 * version which provides just output via l.nop.
 *
 * For explanation of the different fields, see the default simulation
 * configuration file supplied with or1ksim (sim.cfg). */
/* -------------------------------------------------------------------------- */

section memory
  name     =      "RAM"
  type     =    unknown
  ce       =          0
  mc       =          0
  baseaddr = 0x00000000
  size     = 0x00800000
  delayr   =          1
  delayw   =          2
end

section sim
  verbose  =  0
  debug    =  0
  profile  =  0
  history  =  0
  clkcycle = 40ns               /* 25MHz clock */
end

section cpu
  ver         =   0x12
  cfg         =   0x00
  rev         = 0x0001
  superscalar =      0
  hazards     =      0
  dependstats =      0
  sbuf_len    =      0
end

/* Option sections which may be disabled on enabled, according to the precise
   options in or1ksim_board.h and the version of the library selected. */

section ic
  enabled   =   1
  nsets     = 256
  nways     =   1
  blocksize =  16
  hitdelay  =  20
  missdelay =  20
end

section dc
  enabled         =   0
  nsets           = 512
  nways           =   1
  blocksize       =  16
  load_hitdelay   =  20
  load_missdelay  =  20
  store_hitdelay  =  20
  store_missdelay =  20
end

section uart
  enabled  = 1
  baseaddr = 0x90000000
  channel  = "xterm:"
  16550    = 1
end

section debug
  enabled     =     0
end

/* Disabled Sections. The first one needs all its additional fields due to a
   bug in Or1ksim */

section immu
  enabled = 0
end

section dmmu
  enabled = 0
end

section VAPI
  enabled = 0
end

section dma
  enabled = 0
end

section pm
  enabled = 0
end

section bpb
  enabled = 0
end

section ethernet
  enabled = 0
end

section gpio
  enabled = 0
end

section ata
  enabled = 0
end

section vga
  enabled = 0
end

section fb
  enabled = 0
end

section kbd
  enabled = 0
end

section mc
  enabled = 0
end

section pic
  enabled = 0
end

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.