Subversion Repositories openrisc

# Makefile.in generated by automake 1.11 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
DIST_COMMON = $(srcdir)/../../Makefile.shared $(srcdir)/Makefile.in \
        $(srcdir)/Makefile.am
subdir = iconv
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../../libtool.m4 \
        $(top_srcdir)/../../ltoptions.m4 \
        $(top_srcdir)/../../ltsugar.m4 \
        $(top_srcdir)/../../ltversion.m4 \
        $(top_srcdir)/../../lt~obsolete.m4 \
        $(top_srcdir)/../acinclude.m4 $(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
        $(ACLOCAL_M4)
mkinstalldirs = $(SHELL) $(top_srcdir)/../../mkinstalldirs
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
depcomp =
am__depfiles_maybe =
SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
        html-recursive info-recursive install-data-recursive \
        install-dvi-recursive install-exec-recursive \
        install-html-recursive install-info-recursive \
        install-pdf-recursive install-ps-recursive install-recursive \
        installcheck-recursive installdirs-recursive pdf-recursive \
        ps-recursive uninstall-recursive
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__installdirs = "$(DESTDIR)$(cctdir)"
DATA = $(cct_DATA)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
  distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
        $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AR = @AR@
AS = @AS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCAS = @CCAS@
CCASFLAGS = @CCASFLAGS@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CRT0 = @CRT0@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
GREP = @GREP@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBC_EXTRA_DEF = @LIBC_EXTRA_DEF@
LIBC_EXTRA_LIB = @LIBC_EXTRA_LIB@
LIBC_MACHINE_LIB = @LIBC_MACHINE_LIB@
LIBC_POSIX_LIB = @LIBC_POSIX_LIB@
LIBC_SIGNAL_DEF = @LIBC_SIGNAL_DEF@
LIBC_SIGNAL_LIB = @LIBC_SIGNAL_LIB@
LIBC_STDIO64_DEF = @LIBC_STDIO64_DEF@
LIBC_STDIO64_LIB = @LIBC_STDIO64_LIB@
LIBC_STDIO_DEF = @LIBC_STDIO_DEF@
LIBC_STDIO_LIB = @LIBC_STDIO_LIB@
LIBC_SYSCALL_LIB = @LIBC_SYSCALL_LIB@
LIBC_SYS_LIB = @LIBC_SYS_LIB@
LIBC_UNIX_LIB = @LIBC_UNIX_LIB@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@
READELF = @READELF@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
aext = @aext@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
extra_dir = @extra_dir@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
libm_machine_dir = @libm_machine_dir@
localedir = @localedir@
localstatedir = @localstatedir@
lpfx = @lpfx@
lt_ECHO = @lt_ECHO@
machine_dir = @machine_dir@
mandir = @mandir@
mkdir_p = @mkdir_p@
newlib_basedir = @newlib_basedir@
oext = @oext@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
subdirs = @subdirs@
sys_dir = @sys_dir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
AUTOMAKE_OPTIONS = cygnus
SUBDIRS = ces ccs lib .
cctdir = $(datadir)/iconv_data
cct_DATA = encoding.aliases
INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
SUBDEFS = lib/stmp-def
CHEWOUT_FILES = iconv.def
TARGETDOC = ../tmp.texi
CLEANFILES = $(CHEWOUT_FILES) *.ref
all: all-recursive

.SUFFIXES:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/../../Makefile.shared $(am__configure_deps)
        @for dep in $?; do \
          case '$(am__configure_deps)' in \
            *$$dep*) \
              ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
                && { if test -f $@; then exit 0; else break; fi; }; \
              exit 1;; \
          esac; \
        done; \
        echo ' cd $(top_srcdir) && $(AUTOMAKE) --cygnus iconv/Makefile'; \
        $(am__cd) $(top_srcdir) && \
          $(AUTOMAKE) --cygnus iconv/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
        @case '$?' in \
          *config.status*) \
            cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
          *) \
            echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
            cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
        esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):

mostlyclean-libtool:
        -rm -f *.lo

clean-libtool:
        -rm -rf .libs _libs
install-cctDATA: $(cct_DATA)
        @$(NORMAL_INSTALL)
        test -z "$(cctdir)" || $(MKDIR_P) "$(DESTDIR)$(cctdir)"
        @list='$(cct_DATA)'; test -n "$(cctdir)" || list=; \
        for p in $$list; do \
          if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
          echo "$$d$$p"; \
        done | $(am__base_list) | \
        while read files; do \
          echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(cctdir)'"; \
          $(INSTALL_DATA) $$files "$(DESTDIR)$(cctdir)" || exit $$?; \
        done

uninstall-cctDATA:
        @$(NORMAL_UNINSTALL)
        @list='$(cct_DATA)'; test -n "$(cctdir)" || list=; \
        files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
        test -n "$$files" || exit 0; \
        echo " ( cd '$(DESTDIR)$(cctdir)' && rm -f" $$files ")"; \
        cd "$(DESTDIR)$(cctdir)" && rm -f $$files

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
        @failcom='exit 1'; \
        for f in x $$MAKEFLAGS; do \
          case $$f in \
            *=* | --[!k]*);; \
            *k*) failcom='fail=yes';; \
          esac; \
        done; \
        dot_seen=no; \
        target=`echo $@ | sed s/-recursive//`; \
        list='$(SUBDIRS)'; for subdir in $$list; do \
          echo "Making $$target in $$subdir"; \
          if test "$$subdir" = "."; then \
            dot_seen=yes; \
            local_target="$$target-am"; \
          else \
            local_target="$$target"; \
          fi; \
          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
          || eval $$failcom; \
        done; \
        if test "$$dot_seen" = "no"; then \
          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
        fi; test -z "$$fail"

$(RECURSIVE_CLEAN_TARGETS):
        @failcom='exit 1'; \
        for f in x $$MAKEFLAGS; do \
          case $$f in \
            *=* | --[!k]*);; \
            *k*) failcom='fail=yes';; \
          esac; \
        done; \
        dot_seen=no; \
        case "$@" in \
          distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
          *) list='$(SUBDIRS)' ;; \
        esac; \
        rev=''; for subdir in $$list; do \
          if test "$$subdir" = "."; then :; else \
            rev="$$subdir $$rev"; \
          fi; \
        done; \
        rev="$$rev ."; \
        target=`echo $@ | sed s/-recursive//`; \
        for subdir in $$rev; do \
          echo "Making $$target in $$subdir"; \
          if test "$$subdir" = "."; then \
            local_target="$$target-am"; \
          else \
            local_target="$$target"; \
          fi; \
          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
          || eval $$failcom; \
        done && test -z "$$fail"
tags-recursive:
        list='$(SUBDIRS)'; for subdir in $$list; do \
          test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
        done
ctags-recursive:
        list='$(SUBDIRS)'; for subdir in $$list; do \
          test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
        done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
        list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
        unique=`for i in $$list; do \
            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
          done | \
          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
              END { if (nonempty) { for (i in files) print i; }; }'`; \
        mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
                $(TAGS_FILES) $(LISP)
        set x; \
        here=`pwd`; \
        if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
          include_option=--etags-include; \
          empty_fix=.; \
        else \
          include_option=--include; \
          empty_fix=; \
        fi; \
        list='$(SUBDIRS)'; for subdir in $$list; do \
          if test "$$subdir" = .; then :; else \
            test ! -f $$subdir/TAGS || \
              set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
          fi; \
        done; \
        list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
        unique=`for i in $$list; do \
            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
          done | \
          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
              END { if (nonempty) { for (i in files) print i; }; }'`; \
        shift; \
        if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
          test -n "$$unique" || unique=$$empty_fix; \
          if test $$# -gt 0; then \
            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
              "$$@" $$unique; \
          else \
            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
              $$unique; \
          fi; \
        fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
                $(TAGS_FILES) $(LISP)
        list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
        unique=`for i in $$list; do \
            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
          done | \
          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
              END { if (nonempty) { for (i in files) print i; }; }'`; \
        test -z "$(CTAGS_ARGS)$$unique" \
          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
             $$unique

GTAGS:
        here=`$(am__cd) $(top_builddir) && pwd` \
          && $(am__cd) $(top_srcdir) \
          && gtags -i $(GTAGS_ARGS) "$$here"

distclean-tags:
        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
check-am:
check: check-recursive
all-am: Makefile $(DATA)
installdirs: installdirs-recursive
installdirs-am:
        for dir in "$(DESTDIR)$(cctdir)"; do \
          test -z "$$dir" || $(MKDIR_P) "$$dir"; \
        done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
        $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
          install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
          `test -z '$(STRIP)' || \
            echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:
        -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
        -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
        @echo "This command is intended for maintainers to use"
        @echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-recursive
        -rm -f Makefile
distclean-am: clean-am distclean-generic distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am: install-cctDATA

install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am:

install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man:

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
        -rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-cctDATA

.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
        install-am install-strip tags-recursive

.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
        all all-am check check-am clean clean-generic clean-libtool \
        ctags ctags-recursive distclean distclean-generic \
        distclean-libtool distclean-tags dvi dvi-am html html-am info \
        info-am install install-am install-cctDATA install-data \
        install-data-am install-dvi install-dvi-am install-exec \
        install-exec-am install-html install-html-am install-info \
        install-info-am install-man install-pdf install-pdf-am \
        install-ps install-ps-am install-strip installcheck \
        installcheck-am installdirs installdirs-am maintainer-clean \
        maintainer-clean-generic mostlyclean mostlyclean-generic \
        mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
        uninstall uninstall-am uninstall-cctDATA

objectlist.awk.in: $(noinst_LTLIBRARIES)
        -rm -f objectlist.awk.in
        for i in `ls *.lo` ; \
        do \
          echo $$i `pwd`/$$i >> objectlist.awk.in ; \
        done

iconv.def: lib/iconv.def
        cp lib/iconv.def iconv.def

stmp-def: force
        (cd lib && make doc)
        touch $@

.PHONY: force
force:

$(SUBDEFS): stmp-def

lib/iconv.def: $(SUBDEFS); @true

lib/stmp-def: ; @true

doc: $(CHEWOUT_FILES)
        cat $(srcdir)/iconv.tex >> $(TARGETDOC)

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: