URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [gnu-stable/] [newlib-1.18.0/] [newlib/] [libc/] [machine/] [i960/] [strchr.S] - Rev 207
Go to most recent revision | Compare with Previous | Blame | View Log
/*******************************************************************************
*
* Copyright (c) 1993 Intel Corporation
*
* Intel hereby grants you permission to copy, modify, and distribute this
* software and its documentation. Intel grants this permission provided
* that the above copyright notice appears in all copies and that both the
* copyright notice and this permission notice appear in supporting
* documentation. In addition, Intel grants this permission provided that
* you prominently mark as "not part of the original" any modifications
* made to this software or documentation, and that the name of Intel
* Corporation not be used in advertising or publicity pertaining to
* distribution of the software or the documentation without specific,
* written prior permission.
*
* Intel Corporation provides this AS IS, WITHOUT ANY WARRANTY, EXPRESS OR
* IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY
* OR FITNESS FOR A PARTICULAR PURPOSE. Intel makes no guarantee or
* representations regarding the use of, or the results of the use of,
* the software and documentation in terms of correctness, accuracy,
* reliability, currentness, or otherwise; and you rely on the software,
* documentation and results solely at your own risk.
*
* IN NO EVENT SHALL INTEL BE LIABLE FOR ANY LOSS OF USE, LOSS OF BUSINESS,
* LOSS OF PROFITS, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES
* OF ANY KIND. IN NO EVENT SHALL INTEL'S TOTAL LIABILITY EXCEED THE SUM
* PAID TO INTEL FOR THE PRODUCT LICENSED HEREUNDER.
*
******************************************************************************/
.file "strchr.s"
#ifdef __PIC
.pic
#endif
#ifdef __PID
.pid
#endif
/*
* (c) copyright 1988,1993 Intel Corp., all rights reserved
*/
/*
procedure strchr (optimized assembler version for the 80960K series)
src_addr = strchr (src_addr, char)
return a pointer to the first byte that contains the indicated
byte in the source string. Return null if the byte is not found.
Undefined behavior will occur if the end of the source string (i.e.
the terminating null byte) is in the last two words of the program's
allocated memory space. This is so because strchr fetches ahead.
Disallowing the fetch ahead would impose a severe performance penalty.
Strategy:
Fetch the source string by words and scanbyte the words for the
char until either a word with the byte is found or the null byte is
encountered. In the former case, move through the word to find the
matching byte and return its memory address. In the latter case,
return zero (null).
Tactics:
1) Do NOT try to fetch the words in a word aligned manner because,
in my judgement, the performance degradation experienced due to
non-aligned accesses does NOT outweigh the time and complexity added
by the preamble that would be necessary to assure alignment. This
is supported by the intuition that most source arrays (even more
true of most big source arrays) will be word aligned to begin with.
*/
.globl _strchr
.globl __strchr
.leafproc _strchr, __strchr
.align 2
_strchr:
#ifndef __PIC
lda Lrett,g14
#else
lda Lrett-(.+8)(ip),g14
#endif
__strchr:
ld (g0),g4 # fetch first word
lda 0xff,g7 # byte extraction mask
and g1,g7,g1 # make char an 8-bit ordinal
shlo 8,g1,g2 # broadcast the char to four bytes
or g1,g2,g2
shlo 16,g2,g5
or g2,g5,g3
mov g14,g13 # preserve return address
addo 4,g0,g0 # post-increment src pointer
mov 0,g14 # conform to register linkage standard
Lsearch_for_word_with_char_or_null:
mov g4,g5 # copy word
scanbyte g3,g5 # check for byte with char
ld (g0),g4 # fetch next word of src
bo Lsearch_for_char # branch if char found
scanbyte 0,g5 # check for null byte
addo 4,g0,g0 # post-increment src pointer
bno Lsearch_for_word_with_char_or_null # branch if not null
Lnot_found:
mov 0,g0 # char not found. Return null
Lexit_code:
bx (g13) # g0 = addr of char in src (or null); g14 = 0
Lrett:
ret
Lsearch_for_char:
subo 5,g0,g0 # back up the byte pointer
Lsearch_for_char.a:
and g5,g7,g6 # extract byte
cmpo g1,g6 # is it char?
addo 1,g0,g0 # bump src byte ptr
shro 8,g5,g5 # shift word to position next byte
be Lexit_code
cmpobne 0,g6,Lsearch_for_char.a # quit if null comes before char
b Lnot_found
/* end of strchr */
Go to most recent revision | Compare with Previous | Blame | View Log