OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [or1200/] [rtl/] [verilog/] [or1200_dc_top.v] - Rev 282

Go to most recent revision | Compare with Previous | Blame | View Log

//////////////////////////////////////////////////////////////////////
////                                                              ////
////  OR1200's Data Cache top level                               ////
////                                                              ////
////  This file is part of the OpenRISC 1200 project              ////
////  http://opencores.org/project,or1k                           ////
////                                                              ////
////  Description                                                 ////
////  Instantiation of all DC blocks.                             ////
////                                                              ////
////  To Do:                                                      ////
////   - Test error during line read or write                     ////
////                                                              ////
////  Author(s):                                                  ////
////      - Damjan Lampret, lampret@opencores.org                 ////
////      - Julius Baxter, julius@opencores.org                   ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// Copyright (C) 2000, 2010 Authors and OPENCORES.ORG           ////
////                                                              ////
//// This source file may be used and distributed without         ////
//// restriction provided that this copyright statement is not    ////
//// removed from the file and that any derivative work contains  ////
//// the original copyright notice and the associated disclaimer. ////
////                                                              ////
//// This source file is free software; you can redistribute it   ////
//// and/or modify it under the terms of the GNU Lesser General   ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any   ////
//// later version.                                               ////
////                                                              ////
//// This source is distributed in the hope that it will be       ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
//// PURPOSE.  See the GNU Lesser General Public License for more ////
//// details.                                                     ////
////                                                              ////
//// You should have received a copy of the GNU Lesser General    ////
//// Public License along with this source; if not, download it   ////
//// from http://www.opencores.org/lgpl.shtml                     ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
//
//
// $Log: or1200_dc_top.v,v $
// Revision 2.0  2010/06/30 11:00:00  ORSoC
// Minor update: 
// Bugs fixed. 
//
 
// synopsys translate_off
`include "timescale.v"
// synopsys translate_on
`include "or1200_defines.v"
 
//
// Data cache
//
module or1200_dc_top(
	// Rst, clk and clock control
	clk, rst,
 
	// External i/f
	dcsb_dat_o, dcsb_adr_o, dcsb_cyc_o, dcsb_stb_o, dcsb_we_o, dcsb_sel_o, 
	dcsb_cab_o, dcsb_dat_i, dcsb_ack_i, dcsb_err_i,
 
	// Internal i/f
	dc_en,
	dcqmem_adr_i, dcqmem_cycstb_i, dcqmem_ci_i,
	dcqmem_we_i, dcqmem_sel_i, dcqmem_tag_i, dcqmem_dat_i,
	dcqmem_dat_o, dcqmem_ack_o, dcqmem_rty_o, dcqmem_err_o, dcqmem_tag_o,
 
        dc_no_writethrough,
 
`ifdef OR1200_BIST
	// RAM BIST
	mbist_si_i, mbist_so_o, mbist_ctrl_i,
`endif
 
	// SPRs
	spr_cs, spr_write, spr_dat_i, spr_addr, mtspr_dc_done
);
 
parameter dw = `OR1200_OPERAND_WIDTH;
parameter aw = `OR1200_OPERAND_WIDTH;
 
//
// I/O
//
 
//
// Clock and reset
//
input				clk;
input				rst;
 
//
// External I/F
//
output	[dw-1:0]		dcsb_dat_o;
output	[31:0]			dcsb_adr_o;
output				dcsb_cyc_o;
output				dcsb_stb_o;
output				dcsb_we_o;
output	[3:0]			dcsb_sel_o;
output				dcsb_cab_o;
input	[dw-1:0]		dcsb_dat_i;
input				dcsb_ack_i;
input				dcsb_err_i;
 
//
// Internal I/F
//
input				dc_en;
input	[31:0]			dcqmem_adr_i;
input				dcqmem_cycstb_i;
input				dcqmem_ci_i;
input				dcqmem_we_i;
input	[3:0]			dcqmem_sel_i;
input	[3:0]			dcqmem_tag_i;
input	[dw-1:0]		dcqmem_dat_i;
output	[dw-1:0]		dcqmem_dat_o;
output				dcqmem_ack_o;
output				dcqmem_rty_o;
output				dcqmem_err_o;
output	[3:0]			dcqmem_tag_o;
 
input   			dc_no_writethrough;
 
`ifdef OR1200_BIST
//
// RAM BIST
//
input mbist_si_i;
input [`OR1200_MBIST_CTRL_WIDTH - 1:0] mbist_ctrl_i;
output mbist_so_o;
`endif
 
//
// SPR access
//
input				spr_cs;
input				spr_write;
input	[31:0]			spr_dat_i;
input	[aw-1:0]	        spr_addr;
output  			mtspr_dc_done;
 
`ifdef OR1200_NO_DC
 
// Bypass cache
 
// IF to external memory
assign dcsb_dat_o = dcqmem_dat_i;
assign dcsb_adr_o = dcqmem_adr_i;
assign dcsb_cyc_o = dcqmem_cycstb_i;
assign dcsb_stb_o = dcqmem_cycstb_i;
assign dcsb_we_o = dcqmem_we_i;
assign dcsb_sel_o = dcqmem_sel_i;
assign dcsb_cab_o = 1'b0;
 
// IF to internal memory
assign dcqmem_dat_o = dcsb_dat_i;
assign dcqmem_ack_o = dcsb_ack_i;
assign dcqmem_err_o = dcsb_err_i;   
assign dcqmem_rty_o = ~dcqmem_ack_o;
assign dcqmem_tag_o = dcqmem_err_o ? `OR1200_DTAG_BE : dcqmem_tag_i;
 
assign mtspr_dc_done = 1'b1;
 
`else   
 
//
// Internal wires and regs
//
wire				tag_v;
wire	[`OR1200_DCTAG_W-2:0]	tag;
wire    			dirty;   
wire	[dw-1:0]		to_dcram;
wire	[dw-1:0]		from_dcram;
wire	[3:0]			dcram_we;
wire				dctag_we;
wire	[31:0]			dc_addr;
wire				dcfsm_biu_read;
wire				dcfsm_biu_write;
wire                            dcfsm_dcram_di_sel;
wire                            dcfsm_biu_do_sel;   
reg				tagcomp_miss;
wire	[`OR1200_DCINDXH:`OR1200_DCLS]	dctag_addr;
wire				dctag_en;
wire				dctag_v;
wire    			dctag_dirty;
 
wire				dc_block_invalidate;
wire 			        dc_block_flush;
wire 			        dc_block_writeback;   
wire				dcfsm_first_hit_ack;
wire				dcfsm_first_miss_ack;
wire				dcfsm_first_miss_err;
wire				dcfsm_burst;
wire				dcfsm_tag_we;
wire    			dcfsm_tag_valid;
wire    			dcfsm_tag_dirty;
 
`ifdef OR1200_BIST
//
// RAM BIST
//
wire				mbist_ram_so;
wire				mbist_tag_so;
wire				mbist_ram_si = mbist_si_i;
wire				mbist_tag_si = mbist_ram_so;
assign				mbist_so_o = mbist_tag_so;
`endif
 
// Address out to external bus - always from FSM   
assign dcsb_adr_o = dc_addr;
//
// SPR register decodes
//
`ifdef OR1200_DC_WRITETHROUGH
assign dc_block_invalidate = spr_cs & spr_write & 
       ((spr_addr[`OR1200_SPRGRP_DC_ADR_WIDTH-1:0]==`OR1200_SPRGRP_DC_DCBIR) |
	(spr_addr[`OR1200_SPRGRP_DC_ADR_WIDTH-1:0]==`OR1200_SPRGRP_DC_DCBFR));
assign dc_block_flush = 0;
assign dc_block_writeback = 0;
`else   
assign dc_block_invalidate = spr_cs & spr_write & 
	  (spr_addr[`OR1200_SPRGRP_DC_ADR_WIDTH-1:0]==`OR1200_SPRGRP_DC_DCBIR);
assign dc_block_flush =    spr_cs & spr_write &
	   (spr_addr[`OR1200_SPRGRP_DC_ADR_WIDTH-1:0]==`OR1200_SPRGRP_DC_DCBFR);
assign dc_block_writeback =    spr_cs & spr_write &
	   (spr_addr[`OR1200_SPRGRP_DC_ADR_WIDTH-1:0]==`OR1200_SPRGRP_DC_DCBWR);
`endif // !`ifdef OR1200_DC_WRITETHROUGH
 
assign dctag_we = dcfsm_tag_we | dc_block_invalidate;
assign dctag_addr = dc_block_invalidate ? 
		    spr_dat_i[`OR1200_DCINDXH:`OR1200_DCLS] :
		    dc_addr[`OR1200_DCINDXH:`OR1200_DCLS];
assign dctag_en = dc_block_invalidate | dc_en;
 
assign dctag_v = dc_block_invalidate ? 1'b0 : dcfsm_tag_valid;
assign dctag_dirty = dc_block_invalidate ? 1'b0 : dcfsm_tag_dirty;
 
//
// Data to BIU is from DCRAM when bursting lines back into memory
//
assign dcsb_dat_o = dcfsm_biu_do_sel ? from_dcram : dcqmem_dat_i;
 
 
//
// Bypases of the DC when DC is disabled
//
assign dcsb_cyc_o = (dc_en) ? 
		    dcfsm_biu_read | dcfsm_biu_write : dcqmem_cycstb_i;
 
assign dcsb_stb_o = (dc_en) ? 
		    dcfsm_biu_read | dcfsm_biu_write : dcqmem_cycstb_i;
 
assign dcsb_we_o = (dc_en) ? 
		   dcfsm_biu_write : dcqmem_we_i;
 
assign dcsb_sel_o = (dc_en & dcfsm_burst) ? 
		    4'b1111 : dcqmem_sel_i;
 
assign dcsb_cab_o = dc_en & dcfsm_burst & dcsb_cyc_o;
assign dcqmem_rty_o = ~dcqmem_ack_o;
assign dcqmem_tag_o = dcqmem_err_o ? `OR1200_DTAG_BE : dcqmem_tag_i;
 
//
// DC/LSU normal and error termination
//
assign dcqmem_ack_o = dc_en ? 
		      dcfsm_first_hit_ack | dcfsm_first_miss_ack : dcsb_ack_i;
 
assign dcqmem_err_o = dc_en ? dcfsm_first_miss_err : dcsb_err_i;
 
//
// Select between input data generated by LSU or by BIU
//
assign to_dcram = (dcfsm_dcram_di_sel) ? dcsb_dat_i : dcqmem_dat_i;
 
//
// Select between data generated by DCRAM or passed by BIU
//
assign dcqmem_dat_o = dcfsm_first_miss_ack | !dc_en ? dcsb_dat_i : from_dcram;
//assign dcqmem_dat_o = !dc_en ? dcsb_dat_i : from_dcram;
 
//
// Tag comparison
//
   wire [31:`OR1200_DCTAGL]  dcqmem_adr_i_tag;
   assign dcqmem_adr_i_tag = dcqmem_adr_i[31:`OR1200_DCTAGL];
 
always @(tag or dcqmem_adr_i or tag_v) begin
	if ((tag != dcqmem_adr_i_tag) || !tag_v)
		tagcomp_miss = 1'b1;
	else
		tagcomp_miss = 1'b0;
end
 
//
// Instantiation of DC Finite State Machine
//
or1200_dc_fsm or1200_dc_fsm(
	.clk(clk),
	.rst(rst),
	.dc_en(dc_en),
	.dcqmem_cycstb_i(dcqmem_cycstb_i),
	.dcqmem_ci_i(dcqmem_ci_i),
	.dcqmem_we_i(dcqmem_we_i),
	.dcqmem_sel_i(dcqmem_sel_i),
	.tagcomp_miss(tagcomp_miss),
	.tag(tag),
        .tag_v(tag_v),
	.dirty(dirty),
	.biudata_valid(dcsb_ack_i),
	.biudata_error(dcsb_err_i),
	.lsu_addr(dcqmem_adr_i),
	.dcram_we(dcram_we),
	.biu_read(dcfsm_biu_read),
	.biu_write(dcfsm_biu_write),
	.dcram_di_sel(dcfsm_dcram_di_sel),
	.biu_do_sel(dcfsm_biu_do_sel),
	.first_hit_ack(dcfsm_first_hit_ack),
	.first_miss_ack(dcfsm_first_miss_ack),
	.first_miss_err(dcfsm_first_miss_err),
	.burst(dcfsm_burst),
	.tag_we(dcfsm_tag_we),
        .tag_valid(dcfsm_tag_valid),
	.tag_dirty(dcfsm_tag_dirty),
	.dc_addr(dc_addr),
	.dc_no_writethrough(dc_no_writethrough),
	.dc_block_flush(dc_block_flush),
	.dc_block_writeback(dc_block_writeback),
	.spr_dat_i(spr_dat_i),
	.mtspr_dc_done(mtspr_dc_done),
	.spr_cswe(spr_cs & spr_write)
);
 
//
// Instantiation of DC main memory
//
or1200_dc_ram or1200_dc_ram(
	.clk(clk),
	.rst(rst),
`ifdef OR1200_BIST
	// RAM BIST
	.mbist_si_i(mbist_ram_si),
	.mbist_so_o(mbist_ram_so),
	.mbist_ctrl_i(mbist_ctrl_i),
`endif
	.addr(dc_addr[`OR1200_DCINDXH:2]),
	.en(dc_en),
	.we(dcram_we),
	.datain(to_dcram),
	.dataout(from_dcram)
);
 
//
// Instantiation of DC TAG memory
//
or1200_dc_tag or1200_dc_tag(
	.clk(clk),
	.rst(rst),
`ifdef OR1200_BIST
	// RAM BIST
	.mbist_si_i(mbist_tag_si),
	.mbist_so_o(mbist_tag_so),
	.mbist_ctrl_i(mbist_ctrl_i),
`endif
	.addr(dctag_addr),
	.en(dctag_en),
	.we(dctag_we),
	.datain({dc_addr[31:`OR1200_DCTAGL], dctag_v, dctag_dirty}),
	.tag_v(tag_v),
	.tag(tag),
	.dirty(dirty)
);
`endif // !`ifdef OR1200_NO_DC
 
endmodule
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.