URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [or1200/] [rtl/] [verilog/] [or1200_dmmu_tlb.v] - Rev 10
Go to most recent revision | Compare with Previous | Blame | View Log
////////////////////////////////////////////////////////////////////// //// //// //// OR1200's Data TLB //// //// //// //// This file is part of the OpenRISC 1200 project //// //// http://www.opencores.org/cores/or1k/ //// //// //// //// Description //// //// Instantiation of DTLB. //// //// //// //// To Do: //// //// - make it smaller and faster //// //// //// //// Author(s): //// //// - Damjan Lampret, lampret@opencores.org //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2000 Authors and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // // CVS Revision History // // $Log: not supported by cvs2svn $ // Revision 1.6 2004/04/05 08:29:57 lampret // Merged branch_qmem into main tree. // // Revision 1.4.4.1 2003/12/09 11:46:48 simons // Mbist nameing changed, Artisan ram instance signal names fixed, some synthesis waning fixed. // // Revision 1.4 2002/10/17 20:04:40 lampret // Added BIST scan. Special VS RAMs need to be used to implement BIST. // // Revision 1.3 2002/02/11 04:33:17 lampret // Speed optimizations (removed duplicate _cyc_ and _stb_). Fixed D/IMMU cache-inhibit attr. // // Revision 1.2 2002/01/28 01:16:00 lampret // Changed 'void' nop-ops instead of insn[0] to use insn[16]. Debug unit stalls the tick timer. Prepared new flag generation for add and and insns. Blocked DC/IC while they are turned off. Fixed I/D MMU SPRs layout except WAYs. TODO: smart IC invalidate, l.j 2 and TLB ways. // // Revision 1.1 2002/01/03 08:16:15 lampret // New prefixes for RTL files, prefixed module names. Updated cache controllers and MMUs. // // Revision 1.8 2001/10/21 17:57:16 lampret // Removed params from generic_XX.v. Added translate_off/on in sprs.v and id.v. Removed spr_addr from dc.v and ic.v. Fixed CR+LF. // // Revision 1.7 2001/10/14 13:12:09 lampret // MP3 version. // // Revision 1.1.1.1 2001/10/06 10:18:36 igorm // no message // // // synopsys translate_off `include "timescale.v" // synopsys translate_on `include "or1200_defines.v" // // Data TLB // module or1200_dmmu_tlb( // Rst and clk clk, rst, // I/F for translation tlb_en, vaddr, hit, ppn, uwe, ure, swe, sre, ci, `ifdef OR1200_BIST // RAM BIST mbist_si_i, mbist_so_o, mbist_ctrl_i, `endif // SPR access spr_cs, spr_write, spr_addr, spr_dat_i, spr_dat_o ); parameter dw = `OR1200_OPERAND_WIDTH; parameter aw = `OR1200_OPERAND_WIDTH; // // I/O // // // Clock and reset // input clk; input rst; // // I/F for translation // input tlb_en; input [aw-1:0] vaddr; output hit; output [31:`OR1200_DMMU_PS] ppn; output uwe; output ure; output swe; output sre; output ci; `ifdef OR1200_BIST // // RAM BIST // input mbist_si_i; input [`OR1200_MBIST_CTRL_WIDTH - 1:0] mbist_ctrl_i; output mbist_so_o; `endif // // SPR access // input spr_cs; input spr_write; input [31:0] spr_addr; input [31:0] spr_dat_i; output [31:0] spr_dat_o; // // Internal wires and regs // wire [`OR1200_DTLB_TAG] vpn; wire v; wire [`OR1200_DTLB_INDXW-1:0] tlb_index; wire tlb_mr_en; wire tlb_mr_we; wire [`OR1200_DTLBMRW-1:0] tlb_mr_ram_in; wire [`OR1200_DTLBMRW-1:0] tlb_mr_ram_out; wire tlb_tr_en; wire tlb_tr_we; wire [`OR1200_DTLBTRW-1:0] tlb_tr_ram_in; wire [`OR1200_DTLBTRW-1:0] tlb_tr_ram_out; `ifdef OR1200_BIST // // RAM BIST // wire mbist_mr_so; wire mbist_tr_so; wire mbist_mr_si = mbist_si_i; wire mbist_tr_si = mbist_mr_so; assign mbist_so_o = mbist_tr_so; `endif // // Implemented bits inside match and translate registers // // dtlbwYmrX: vpn 31-19 v 0 // dtlbwYtrX: ppn 31-13 swe 9 sre 8 uwe 7 ure 6 // // dtlb memory width: // 19 bits for ppn // 13 bits for vpn // 1 bit for valid // 4 bits for protection // 1 bit for cache inhibit // // Enable for Match registers // assign tlb_mr_en = tlb_en | (spr_cs & !spr_addr[`OR1200_DTLB_TM_ADDR]); // // Write enable for Match registers // assign tlb_mr_we = spr_cs & spr_write & !spr_addr[`OR1200_DTLB_TM_ADDR]; // // Enable for Translate registers // assign tlb_tr_en = tlb_en | (spr_cs & spr_addr[`OR1200_DTLB_TM_ADDR]); // // Write enable for Translate registers // assign tlb_tr_we = spr_cs & spr_write & spr_addr[`OR1200_DTLB_TM_ADDR]; // // Output to SPRS unit // assign spr_dat_o = (spr_cs & !spr_write & !spr_addr[`OR1200_DTLB_TM_ADDR]) ? {vpn, tlb_index & {`OR1200_DTLB_INDXW{v}}, {`OR1200_DTLB_TAGW-7{1'b0}}, 1'b0, 5'b00000, v} : (spr_cs & !spr_write & spr_addr[`OR1200_DTLB_TM_ADDR]) ? {ppn, {`OR1200_DMMU_PS-10{1'b0}}, swe, sre, uwe, ure, {4{1'b0}}, ci, 1'b0} : 32'h00000000; // // Assign outputs from Match registers // assign {vpn, v} = tlb_mr_ram_out; // // Assign to Match registers inputs // assign tlb_mr_ram_in = {spr_dat_i[`OR1200_DTLB_TAG], spr_dat_i[`OR1200_DTLBMR_V_BITS]}; // // Assign outputs from Translate registers // assign {ppn, swe, sre, uwe, ure, ci} = tlb_tr_ram_out; // // Assign to Translate registers inputs // assign tlb_tr_ram_in = {spr_dat_i[31:`OR1200_DMMU_PS], spr_dat_i[`OR1200_DTLBTR_SWE_BITS], spr_dat_i[`OR1200_DTLBTR_SRE_BITS], spr_dat_i[`OR1200_DTLBTR_UWE_BITS], spr_dat_i[`OR1200_DTLBTR_URE_BITS], spr_dat_i[`OR1200_DTLBTR_CI_BITS]}; // // Generate hit // assign hit = (vpn == vaddr[`OR1200_DTLB_TAG]) & v; // // TLB index is normally vaddr[18:13]. If it is SPR access then index is // spr_addr[5:0]. // assign tlb_index = spr_cs ? spr_addr[`OR1200_DTLB_INDXW-1:0] : vaddr[`OR1200_DTLB_INDX]; // // Instantiation of DTLB Match Registers // or1200_spram_64x14 dtlb_mr_ram( .clk(clk), .rst(rst), `ifdef OR1200_BIST // RAM BIST .mbist_si_i(mbist_mr_si), .mbist_so_o(mbist_mr_so), .mbist_ctrl_i(mbist_ctrl_i), `endif .ce(tlb_mr_en), .we(tlb_mr_we), .oe(1'b1), .addr(tlb_index), .di(tlb_mr_ram_in), .doq(tlb_mr_ram_out) ); // // Instantiation of DTLB Translate Registers // or1200_spram_64x24 dtlb_tr_ram( .clk(clk), .rst(rst), `ifdef OR1200_BIST // RAM BIST .mbist_si_i(mbist_tr_si), .mbist_so_o(mbist_tr_so), .mbist_ctrl_i(mbist_ctrl_i), `endif .ce(tlb_tr_en), .we(tlb_tr_we), .oe(1'b1), .addr(tlb_index), .di(tlb_tr_ram_in), .doq(tlb_tr_ram_out) ); endmodule
Go to most recent revision | Compare with Previous | Blame | View Log