URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [or1200/] [rtl/] [verilog/] [or1200_dmmu_top.v] - Rev 861
Go to most recent revision | Compare with Previous | Blame | View Log
////////////////////////////////////////////////////////////////////// //// //// //// OR1200's Data MMU top level //// //// //// //// This file is part of the OpenRISC 1200 project //// //// http://www.opencores.org/project,or1k //// //// //// //// Description //// //// Instantiation of all DMMU blocks. //// //// //// //// To Do: //// //// - make it smaller and faster //// //// //// //// Author(s): //// //// - Damjan Lampret, lampret@opencores.org //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2000 Authors and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // // $Log: or1200_dmmu_top.v,v $ // Revision 2.0 2010/06/30 11:00:00 ORSoC // Minor update: // Bugs fixed. // // synopsys translate_off `include "timescale.v" // synopsys translate_on `include "or1200_defines.v" // // Data MMU // module or1200_dmmu_top( // Rst and clk clk, rst, // CPU i/f dc_en, dmmu_en, supv, dcpu_adr_i, dcpu_cycstb_i, dcpu_we_i, dcpu_tag_o, dcpu_err_o, // SPR access spr_cs, spr_write, spr_addr, spr_dat_i, spr_dat_o, `ifdef OR1200_BIST // RAM BIST mbist_si_i, mbist_so_o, mbist_ctrl_i, `endif // DC i/f qmemdmmu_err_i, qmemdmmu_tag_i, qmemdmmu_adr_o, qmemdmmu_cycstb_o, qmemdmmu_ci_o ); parameter dw = `OR1200_OPERAND_WIDTH; parameter aw = `OR1200_OPERAND_WIDTH; // // I/O // // // Clock and reset // input clk; input rst; // // CPU I/F // input dc_en; input dmmu_en; input supv; input [aw-1:0] dcpu_adr_i; input dcpu_cycstb_i; input dcpu_we_i; output [3:0] dcpu_tag_o; output dcpu_err_o; // // SPR access // input spr_cs; input spr_write; input [aw-1:0] spr_addr; input [31:0] spr_dat_i; output [31:0] spr_dat_o; `ifdef OR1200_BIST // // RAM BIST // input mbist_si_i; input [`OR1200_MBIST_CTRL_WIDTH - 1:0] mbist_ctrl_i; output mbist_so_o; `endif // // DC I/F // input qmemdmmu_err_i; input [3:0] qmemdmmu_tag_i; output [aw-1:0] qmemdmmu_adr_o; output qmemdmmu_cycstb_o; output qmemdmmu_ci_o; // // Internal wires and regs // wire dtlb_spr_access; wire [31:`OR1200_DMMU_PS] dtlb_ppn; wire dtlb_hit; wire dtlb_uwe; wire dtlb_ure; wire dtlb_swe; wire dtlb_sre; wire [31:0] dtlb_dat_o; wire dtlb_en; wire dtlb_ci; wire fault; wire miss; `ifdef OR1200_NO_DMMU `else reg dtlb_done; reg [31:`OR1200_DMMU_PS] dcpu_vpn_r; `endif // // Implemented bits inside match and translate registers // // dtlbwYmrX: vpn 31-10 v 0 // dtlbwYtrX: ppn 31-10 swe 9 sre 8 uwe 7 ure 6 // // dtlb memory width: // 19 bits for ppn // 13 bits for vpn // 1 bit for valid // 4 bits for protection // 1 bit for cache inhibit `ifdef OR1200_NO_DMMU // // Put all outputs in inactive state // assign spr_dat_o = 32'h00000000; assign qmemdmmu_adr_o = dcpu_adr_i; assign dcpu_tag_o = qmemdmmu_tag_i; assign qmemdmmu_cycstb_o = dcpu_cycstb_i; assign dcpu_err_o = qmemdmmu_err_i; assign qmemdmmu_ci_o = `OR1200_DMMU_CI; `ifdef OR1200_BIST assign mbist_so_o = mbist_si_i; `endif `else // // DTLB SPR access // // 0A00 - 0AFF dtlbmr w0 // 0A00 - 0A3F dtlbmr w0 [63:0] // // 0B00 - 0BFF dtlbtr w0 // 0B00 - 0B3F dtlbtr w0 [63:0] // assign dtlb_spr_access = spr_cs; // // Tags: // // OR1200_DTAG_TE - TLB miss Exception // OR1200_DTAG_PE - Page fault Exception // assign dcpu_tag_o = miss ? `OR1200_DTAG_TE : fault ? `OR1200_DTAG_PE : qmemdmmu_tag_i; // // dcpu_err_o // assign dcpu_err_o = miss | fault | qmemdmmu_err_i; // // Assert dtlb_done one clock cycle after new address and dtlb_en must be active // always @(posedge clk or `OR1200_RST_EVENT rst) if (rst == `OR1200_RST_VALUE) dtlb_done <= 1'b0; else if (dtlb_en) dtlb_done <= dcpu_cycstb_i; else dtlb_done <= 1'b0; // // Cut transfer if something goes wrong with translation. Also delayed signals // because of translation delay. assign qmemdmmu_cycstb_o = (dc_en & dmmu_en) ? !(miss | fault) & dtlb_done & dcpu_cycstb_i : !(miss | fault) & dcpu_cycstb_i; // // Cache Inhibit // assign qmemdmmu_ci_o = dmmu_en ? dtlb_ci : `OR1200_DMMU_CI; // // Register dcpu_adr_i's VPN for use when DMMU is not enabled but PPN is // expected to come one clock cycle after offset part. // always @(posedge clk or `OR1200_RST_EVENT rst) if (rst == `OR1200_RST_VALUE) dcpu_vpn_r <= {32-`OR1200_DMMU_PS{1'b0}}; else dcpu_vpn_r <= dcpu_adr_i[31:`OR1200_DMMU_PS]; // // Physical address is either translated virtual address or // simply equal when DMMU is disabled // assign qmemdmmu_adr_o = dmmu_en ? {dtlb_ppn, dcpu_adr_i[`OR1200_DMMU_PS-1:0]} : dcpu_adr_i; // // Output to SPRS unit // assign spr_dat_o = dtlb_spr_access ? dtlb_dat_o : 32'h00000000; // // Page fault exception logic // assign fault = dtlb_done & ( (!dcpu_we_i & !supv & !dtlb_ure) // Load in user mode not enabled || (!dcpu_we_i & supv & !dtlb_sre) // Load in supv mode not enabled || (dcpu_we_i & !supv & !dtlb_uwe) // Store in user mode not enabled || (dcpu_we_i & supv & !dtlb_swe)); // Store in supv mode not enabled // // TLB Miss exception logic // assign miss = dtlb_done & !dtlb_hit; // // DTLB Enable // assign dtlb_en = dmmu_en & dcpu_cycstb_i; // // Instantiation of DTLB // or1200_dmmu_tlb or1200_dmmu_tlb( // Rst and clk .clk(clk), .rst(rst), // I/F for translation .tlb_en(dtlb_en), .vaddr(dcpu_adr_i), .hit(dtlb_hit), .ppn(dtlb_ppn), .uwe(dtlb_uwe), .ure(dtlb_ure), .swe(dtlb_swe), .sre(dtlb_sre), .ci(dtlb_ci), `ifdef OR1200_BIST // RAM BIST .mbist_si_i(mbist_si_i), .mbist_so_o(mbist_so_o), .mbist_ctrl_i(mbist_ctrl_i), `endif // SPR access .spr_cs(dtlb_spr_access), .spr_write(spr_write), .spr_addr(spr_addr), .spr_dat_i(spr_dat_i), .spr_dat_o(dtlb_dat_o) ); `endif endmodule
Go to most recent revision | Compare with Previous | Blame | View Log