OpenCores
URL https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk

Subversion Repositories openrisc_me

[/] [openrisc/] [trunk/] [or1200/] [rtl/] [verilog/] [or1200_sprs.v] - Rev 146

Go to most recent revision | Compare with Previous | Blame | View Log

//////////////////////////////////////////////////////////////////////
////                                                              ////
////  OR1200's interface to SPRs                                  ////
////                                                              ////
////  This file is part of the OpenRISC 1200 project              ////
////  http://www.opencores.org/cores/or1k/                        ////
////                                                              ////
////  Description                                                 ////
////  Decoding of SPR addresses and access to SPRs                ////
////                                                              ////
////  To Do:                                                      ////
////   - make it smaller and faster                               ////
////                                                              ////
////  Author(s):                                                  ////
////      - Damjan Lampret, lampret@opencores.org                 ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// Copyright (C) 2000 Authors and OPENCORES.ORG                 ////
////                                                              ////
//// This source file may be used and distributed without         ////
//// restriction provided that this copyright statement is not    ////
//// removed from the file and that any derivative work contains  ////
//// the original copyright notice and the associated disclaimer. ////
////                                                              ////
//// This source file is free software; you can redistribute it   ////
//// and/or modify it under the terms of the GNU Lesser General   ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any   ////
//// later version.                                               ////
////                                                              ////
//// This source is distributed in the hope that it will be       ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
//// PURPOSE.  See the GNU Lesser General Public License for more ////
//// details.                                                     ////
////                                                              ////
//// You should have received a copy of the GNU Lesser General    ////
//// Public License along with this source; if not, download it   ////
//// from http://www.opencores.org/lgpl.shtml                     ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
//
// CVS Revision History
//
// $Log: or1200_sprs.v,v $
// Revision 2.0  2010/06/30 11:00:00  ORSoC
// Major update: 
// Structure reordered and bugs fixed. 
//
// Revision 1.11  2004/04/05 08:29:57  lampret
// Merged branch_qmem into main tree.
//
// Revision 1.9.4.1  2003/12/17 13:43:38  simons
// Exception prefix configuration changed.
//
// Revision 1.9  2002/09/07 05:42:02  lampret
// Added optional SR[CY]. Added define to enable additional (compare) flag modifiers. Defines are OR1200_IMPL_ADDC and OR1200_ADDITIONAL_FLAG_MODIFIERS.
//
// Revision 1.8  2002/08/28 01:44:25  lampret
// Removed some commented RTL. Fixed SR/ESR flag bug.
//
// Revision 1.7  2002/03/29 15:16:56  lampret
// Some of the warnings fixed.
//
// Revision 1.6  2002/03/11 01:26:57  lampret
// Changed generation of SPR address. Now it is ORed from base and offset instead of a sum.
//
// Revision 1.5  2002/02/01 19:56:54  lampret
// Fixed combinational loops.
//
// Revision 1.4  2002/01/23 07:52:36  lampret
// Changed default reset values for SR and ESR to match or1ksim's. Fixed flop model in or1200_dpram_32x32 when OR1200_XILINX_RAM32X1D is defined.
//
// Revision 1.3  2002/01/19 09:27:49  lampret
// SR[TEE] should be zero after reset.
//
// Revision 1.2  2002/01/18 07:56:00  lampret
// No more low/high priority interrupts (PICPR removed). Added tick timer exception. Added exception prefix (SR[EPH]). Fixed single-step bug whenreading NPC.
//
// Revision 1.1  2002/01/03 08:16:15  lampret
// New prefixes for RTL files, prefixed module names. Updated cache controllers and MMUs.
//
// Revision 1.12  2001/11/23 21:42:31  simons
// Program counter divided to PPC and NPC.
//
// Revision 1.11  2001/11/23 08:38:51  lampret
// Changed DSR/DRR behavior and exception detection.
//
// Revision 1.10  2001/11/12 01:45:41  lampret
// Moved flag bit into SR. Changed RF enable from constant enable to dynamic enable for read ports.
//
// Revision 1.9  2001/10/21 17:57:16  lampret
// Removed params from generic_XX.v. Added translate_off/on in sprs.v and id.v. Removed spr_addr from dc.v and ic.v. Fixed CR+LF.
//
// Revision 1.8  2001/10/14 13:12:10  lampret
// MP3 version.
//
// Revision 1.1.1.1  2001/10/06 10:18:36  igorm
// no message
//
// Revision 1.3  2001/08/13 03:36:20  lampret
// Added cfg regs. Moved all defines into one defines.v file. More cleanup.
//
// Revision 1.2  2001/08/09 13:39:33  lampret
// Major clean-up.
//
// Revision 1.1  2001/07/20 00:46:21  lampret
// Development version of RTL. Libraries are missing.
//
//
 
// synopsys translate_off
`include "timescale.v"
// synopsys translate_on
`include "or1200_defines.v"
 
module or1200_sprs(
		// Clk & Rst
		clk, rst,
 
		// Internal CPU interface
		flagforw, flag_we, flag, cyforw, cy_we, carry,
		addrbase, addrofs, dat_i, branch_op, ex_spr_read, ex_spr_write, 
		epcr, eear, esr, except_started,
		to_wbmux, epcr_we, eear_we, esr_we, pc_we, sr_we, to_sr, sr,
		spr_dat_cfgr, spr_dat_rf, spr_dat_npc, spr_dat_ppc, spr_dat_mac,
		boot_adr_sel_i,
 
		// From/to other RISC units
		spr_dat_pic, spr_dat_tt, spr_dat_pm,
		spr_dat_dmmu, spr_dat_immu, spr_dat_du,
		spr_addr, spr_dat_o, spr_cs, spr_we,
 
		du_addr, du_dat_du, du_read,
		du_write, du_dat_cpu
 
);
 
parameter width = `OR1200_OPERAND_WIDTH;
 
//
// I/O Ports
//
 
//
// Internal CPU interface
//
input				clk; 		// Clock
input 				rst;		// Reset
input 				flagforw;	// From ALU
input 				flag_we;	// From ALU
output 				flag;		// SR[F]
input 				cyforw;		// From ALU
input 				cy_we;		// From ALU
output 				carry;		// SR[CY]
input	[width-1:0] 		addrbase;	// SPR base address
input	[15:0] 			addrofs;	// SPR offset
input	[width-1:0]		dat_i;		// SPR write data
input                           ex_spr_read;	// l.mfspr in EX
input                           ex_spr_write;	// l.mtspr in EX
input	[`OR1200_BRANCHOP_WIDTH-1:0]	branch_op;	// Branch operation
input	[width-1:0] 		epcr;		// EPCR0
input	[width-1:0] 		eear;		// EEAR0
input	[`OR1200_SR_WIDTH-1:0] 	esr;		// ESR0
input 				except_started; // Exception was started
output	[width-1:0]		to_wbmux;	// For l.mfspr
output				epcr_we;	// EPCR0 write enable
output				eear_we;	// EEAR0 write enable
output				esr_we;		// ESR0 write enable
output				pc_we;		// PC write enable
output 				sr_we;		// Write enable SR
output	[`OR1200_SR_WIDTH-1:0]	to_sr;		// Data to SR
output	[`OR1200_SR_WIDTH-1:0]	sr;		// SR
input	[31:0]			spr_dat_cfgr;	// Data from CFGR
input	[31:0]			spr_dat_rf;	// Data from RF
input	[31:0]			spr_dat_npc;	// Data from NPC
input	[31:0]			spr_dat_ppc;	// Data from PPC   
input	[31:0]			spr_dat_mac;	// Data from MAC
input				boot_adr_sel_i;
 
//
// To/from other RISC units
//
input	[31:0]			spr_dat_pic;	// Data from PIC
input	[31:0]			spr_dat_tt;	// Data from TT
input	[31:0]			spr_dat_pm;	// Data from PM
input	[31:0]			spr_dat_dmmu;	// Data from DMMU
input	[31:0]			spr_dat_immu;	// Data from IMMU
input	[31:0]			spr_dat_du;	// Data from DU
output	[31:0]			spr_addr;	// SPR Address
output	[31:0]			spr_dat_o;	// Data to unit
output	[31:0]			spr_cs;		// Unit select
output				spr_we;		// SPR write enable
 
//
// To/from Debug Unit
//
input	[width-1:0]		du_addr;	// Address
input	[width-1:0]		du_dat_du;	// Data from DU to SPRS
input				du_read;	// Read qualifier
input				du_write;	// Write qualifier
output	[width-1:0]		du_dat_cpu;	// Data from SPRS to DU
 
//
// Internal regs & wires
//
reg	[`OR1200_SR_WIDTH-1:0]	sr_reg;			// SR
reg				sr_reg_bit_eph;		// SR_EPH bit
reg				sr_reg_bit_eph_select;	// SR_EPH select
wire				sr_reg_bit_eph_muxed;	// SR_EPH muxed bit
reg	[`OR1200_SR_WIDTH-1:0]	sr;			// SR
reg	[width-1:0]		to_wbmux;	// For l.mfspr
wire				cfgr_sel;	// Select for cfg regs
wire				rf_sel;		// Select for RF
wire				npc_sel;	// Select for NPC
wire				ppc_sel;	// Select for PPC
wire 				sr_sel;		// Select for SR	
wire 				epcr_sel;	// Select for EPCR0
wire 				eear_sel;	// Select for EEAR0
wire 				esr_sel;	// Select for ESR0
wire	[31:0]			sys_data;	// Read data from system SPRs
wire				du_access;	// Debug unit access
reg	[31:0]			unqualified_cs;	// Unqualified chip selects
   wire 			ex_spr_write; // jb
 
//
// Decide if it is debug unit access
//
assign du_access = du_read | du_write;
 
//
// Generate SPR address from base address and offset
// OR from debug unit address
//
assign spr_addr = du_access ? du_addr : (addrbase | {16'h0000, addrofs});
 
//
// SPR is written by debug unit or by l.mtspr
//
assign spr_dat_o = du_write ? du_dat_du : dat_i;
 
//
// debug unit data input:
//  - read of SPRS by debug unit
//  - write into debug unit SPRs by debug unit itself
//  - write into debug unit SPRs by l.mtspr
//
assign du_dat_cpu = du_read ? to_wbmux : du_write ? du_dat_du : dat_i;
 
//
// Write into SPRs when DU or l.mtspr
//
assign spr_we = du_write | ex_spr_write;
 
//
// Qualify chip selects
//
assign spr_cs = unqualified_cs & {32{du_read | du_write | ex_spr_read | (ex_spr_write & sr[`OR1200_SR_SM])}};
 
//
// Decoding of groups
//
always @(spr_addr)
	case (spr_addr[`OR1200_SPR_GROUP_BITS])	// synopsys parallel_case
		`OR1200_SPR_GROUP_WIDTH'd00: unqualified_cs = 32'b00000000_00000000_00000000_00000001;
		`OR1200_SPR_GROUP_WIDTH'd01: unqualified_cs = 32'b00000000_00000000_00000000_00000010;
		`OR1200_SPR_GROUP_WIDTH'd02: unqualified_cs = 32'b00000000_00000000_00000000_00000100;
		`OR1200_SPR_GROUP_WIDTH'd03: unqualified_cs = 32'b00000000_00000000_00000000_00001000;
		`OR1200_SPR_GROUP_WIDTH'd04: unqualified_cs = 32'b00000000_00000000_00000000_00010000;
		`OR1200_SPR_GROUP_WIDTH'd05: unqualified_cs = 32'b00000000_00000000_00000000_00100000;
		`OR1200_SPR_GROUP_WIDTH'd06: unqualified_cs = 32'b00000000_00000000_00000000_01000000;
		`OR1200_SPR_GROUP_WIDTH'd07: unqualified_cs = 32'b00000000_00000000_00000000_10000000;
		`OR1200_SPR_GROUP_WIDTH'd08: unqualified_cs = 32'b00000000_00000000_00000001_00000000;
		`OR1200_SPR_GROUP_WIDTH'd09: unqualified_cs = 32'b00000000_00000000_00000010_00000000;
		`OR1200_SPR_GROUP_WIDTH'd10: unqualified_cs = 32'b00000000_00000000_00000100_00000000;
		`OR1200_SPR_GROUP_WIDTH'd11: unqualified_cs = 32'b00000000_00000000_00001000_00000000;
		`OR1200_SPR_GROUP_WIDTH'd12: unqualified_cs = 32'b00000000_00000000_00010000_00000000;
		`OR1200_SPR_GROUP_WIDTH'd13: unqualified_cs = 32'b00000000_00000000_00100000_00000000;
		`OR1200_SPR_GROUP_WIDTH'd14: unqualified_cs = 32'b00000000_00000000_01000000_00000000;
		`OR1200_SPR_GROUP_WIDTH'd15: unqualified_cs = 32'b00000000_00000000_10000000_00000000;
		`OR1200_SPR_GROUP_WIDTH'd16: unqualified_cs = 32'b00000000_00000001_00000000_00000000;
		`OR1200_SPR_GROUP_WIDTH'd17: unqualified_cs = 32'b00000000_00000010_00000000_00000000;
		`OR1200_SPR_GROUP_WIDTH'd18: unqualified_cs = 32'b00000000_00000100_00000000_00000000;
		`OR1200_SPR_GROUP_WIDTH'd19: unqualified_cs = 32'b00000000_00001000_00000000_00000000;
		`OR1200_SPR_GROUP_WIDTH'd20: unqualified_cs = 32'b00000000_00010000_00000000_00000000;
		`OR1200_SPR_GROUP_WIDTH'd21: unqualified_cs = 32'b00000000_00100000_00000000_00000000;
		`OR1200_SPR_GROUP_WIDTH'd22: unqualified_cs = 32'b00000000_01000000_00000000_00000000;
		`OR1200_SPR_GROUP_WIDTH'd23: unqualified_cs = 32'b00000000_10000000_00000000_00000000;
		`OR1200_SPR_GROUP_WIDTH'd24: unqualified_cs = 32'b00000001_00000000_00000000_00000000;
		`OR1200_SPR_GROUP_WIDTH'd25: unqualified_cs = 32'b00000010_00000000_00000000_00000000;
		`OR1200_SPR_GROUP_WIDTH'd26: unqualified_cs = 32'b00000100_00000000_00000000_00000000;
		`OR1200_SPR_GROUP_WIDTH'd27: unqualified_cs = 32'b00001000_00000000_00000000_00000000;
		`OR1200_SPR_GROUP_WIDTH'd28: unqualified_cs = 32'b00010000_00000000_00000000_00000000;
		`OR1200_SPR_GROUP_WIDTH'd29: unqualified_cs = 32'b00100000_00000000_00000000_00000000;
		`OR1200_SPR_GROUP_WIDTH'd30: unqualified_cs = 32'b01000000_00000000_00000000_00000000;
		`OR1200_SPR_GROUP_WIDTH'd31: unqualified_cs = 32'b10000000_00000000_00000000_00000000;
	endcase
 
//
// SPRs System Group
//
 
//
// What to write into SR
//
assign to_sr[`OR1200_SR_FO:`OR1200_SR_OV] =
		(except_started) ? sr[`OR1200_SR_FO:`OR1200_SR_OV] :
		(branch_op == `OR1200_BRANCHOP_RFE) ? esr[`OR1200_SR_FO:`OR1200_SR_OV] :
		(spr_we && sr_sel) ? {1'b1, spr_dat_o[`OR1200_SR_FO-1:`OR1200_SR_OV]}:
		sr[`OR1200_SR_FO:`OR1200_SR_OV];
assign to_sr[`OR1200_SR_TED] =
		(except_started) ? 1'b1 :
		(branch_op == `OR1200_BRANCHOP_RFE) ? esr[`OR1200_SR_TED] :
		(spr_we && sr_sel) ? spr_dat_o[`OR1200_SR_TED]:
		sr[`OR1200_SR_TED];
assign to_sr[`OR1200_SR_CY] =
		(except_started) ? sr[`OR1200_SR_CY] :
		(branch_op == `OR1200_BRANCHOP_RFE) ? esr[`OR1200_SR_CY] :
		cy_we ? cyforw :
		(spr_we && sr_sel) ? spr_dat_o[`OR1200_SR_CY] :
		sr[`OR1200_SR_CY];
assign to_sr[`OR1200_SR_F] =
		(except_started) ? sr[`OR1200_SR_F] :
		(branch_op == `OR1200_BRANCHOP_RFE) ? esr[`OR1200_SR_F] :
		flag_we ? flagforw :
		(spr_we && sr_sel) ? spr_dat_o[`OR1200_SR_F] :
		sr[`OR1200_SR_F];
assign to_sr[`OR1200_SR_CE:`OR1200_SR_SM] =
		(except_started) ? {sr[`OR1200_SR_CE:`OR1200_SR_LEE], 2'b00, sr[`OR1200_SR_ICE:`OR1200_SR_DCE], 3'b001} :
		(branch_op == `OR1200_BRANCHOP_RFE) ? esr[`OR1200_SR_CE:`OR1200_SR_SM] :
		(spr_we && sr_sel) ? spr_dat_o[`OR1200_SR_CE:`OR1200_SR_SM]:
		sr[`OR1200_SR_CE:`OR1200_SR_SM];
 
//
// Selects for system SPRs
//
assign cfgr_sel = (spr_cs[`OR1200_SPR_GROUP_SYS] && (spr_addr[10:4] == `OR1200_SPR_CFGR));
assign rf_sel = (spr_cs[`OR1200_SPR_GROUP_SYS] && (spr_addr[10:5] == `OR1200_SPR_RF));
assign npc_sel = (spr_cs[`OR1200_SPR_GROUP_SYS] && (spr_addr[10:0] == `OR1200_SPR_NPC));
assign ppc_sel = (spr_cs[`OR1200_SPR_GROUP_SYS] && (spr_addr[10:0] == `OR1200_SPR_PPC));
assign sr_sel = (spr_cs[`OR1200_SPR_GROUP_SYS] && (spr_addr[10:0] == `OR1200_SPR_SR));
assign epcr_sel = (spr_cs[`OR1200_SPR_GROUP_SYS] && (spr_addr[10:0] == `OR1200_SPR_EPCR));
assign eear_sel = (spr_cs[`OR1200_SPR_GROUP_SYS] && (spr_addr[10:0] == `OR1200_SPR_EEAR));
assign esr_sel = (spr_cs[`OR1200_SPR_GROUP_SYS] && (spr_addr[10:0] == `OR1200_SPR_ESR));
 
//
// Write enables for system SPRs
//
assign sr_we = (spr_we && sr_sel) | (branch_op == `OR1200_BRANCHOP_RFE) | flag_we | cy_we;
assign pc_we = (du_write && (npc_sel | ppc_sel));
assign epcr_we = (spr_we && epcr_sel);
assign eear_we = (spr_we && eear_sel);
assign esr_we = (spr_we && esr_sel);
 
//
// Output from system SPRs
//
assign sys_data = (spr_dat_cfgr & {32{cfgr_sel}}) |
		  (spr_dat_rf & {32{rf_sel}}) |
		  (spr_dat_npc & {32{npc_sel}}) |
		  (spr_dat_ppc & {32{ppc_sel}}) |
		  ({{32-`OR1200_SR_WIDTH{1'b0}},sr} & {32{sr_sel}}) |
		  (epcr & {32{epcr_sel}}) |
		  (eear & {32{eear_sel}}) |
		  ({{32-`OR1200_SR_WIDTH{1'b0}},esr} & {32{esr_sel}});
 
//
// Flag alias
//
assign flag = sr[`OR1200_SR_F];
 
//
// Carry alias
//
assign carry = sr[`OR1200_SR_CY];
 
//
// Supervision register
//
always @(posedge clk or posedge rst)
	if (rst)
		sr_reg <= #1 {2'h1, `OR1200_SR_EPH_DEF, {`OR1200_SR_WIDTH-4{1'b0}}, 1'b1};
	else if (except_started)
		sr_reg <= #1 to_sr[`OR1200_SR_WIDTH-1:0];
	else if (sr_we)
		sr_reg <= #1 to_sr[`OR1200_SR_WIDTH-1:0];
 
// EPH part of Supervision register
always @(posedge clk or posedge rst)
	// default value 
	if (rst) begin
		sr_reg_bit_eph <= #1 `OR1200_SR_EPH_DEF;
		sr_reg_bit_eph_select <= #1 1'b1;	// select async. value due to reset state
	end
	// selected value (different from default) is written into FF after reset state
	else if (sr_reg_bit_eph_select) begin
		sr_reg_bit_eph <= #1 boot_adr_sel_i;	// dynamic value can only be assigned to FF out of reset! 
		sr_reg_bit_eph_select <= #1 1'b0;	// select FF value 
	end
	else if (sr_we) begin
		sr_reg_bit_eph <= #1 to_sr[`OR1200_SR_EPH];
	end
 
// select async. value of EPH bit after reset 
assign	sr_reg_bit_eph_muxed = (sr_reg_bit_eph_select) ? boot_adr_sel_i : sr_reg_bit_eph;
 
// EPH part joined together with rest of Supervision register
always @(sr_reg or sr_reg_bit_eph_muxed)
	sr = {sr_reg[`OR1200_SR_WIDTH-1:`OR1200_SR_WIDTH-2], sr_reg_bit_eph_muxed, sr_reg[`OR1200_SR_WIDTH-4:0]};
 
//
// MTSPR/MFSPR interface
//
always @(spr_addr or sys_data or spr_dat_mac or spr_dat_pic or spr_dat_pm or
	spr_dat_dmmu or spr_dat_immu or spr_dat_du or spr_dat_tt) begin
		casex (spr_addr[`OR1200_SPR_GROUP_BITS]) // synopsys parallel_case
			`OR1200_SPR_GROUP_SYS:
				to_wbmux = sys_data;
			`OR1200_SPR_GROUP_TT:
				to_wbmux = spr_dat_tt;
			`OR1200_SPR_GROUP_PIC:
				to_wbmux = spr_dat_pic;
			`OR1200_SPR_GROUP_PM:
				to_wbmux = spr_dat_pm;
			`OR1200_SPR_GROUP_DMMU:
				to_wbmux = spr_dat_dmmu;
			`OR1200_SPR_GROUP_IMMU:
				to_wbmux = spr_dat_immu;
			`OR1200_SPR_GROUP_MAC:
				to_wbmux = spr_dat_mac;
			default: //`OR1200_SPR_GROUP_DU:
				to_wbmux = spr_dat_du;
		endcase
end
 
endmodule
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.