URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [or1200/] [rtl/] [verilog/] [or1200_wbmux.v] - Rev 118
Go to most recent revision | Compare with Previous | Blame | View Log
////////////////////////////////////////////////////////////////////// //// //// //// OR1200's Write-back Mux //// //// //// //// This file is part of the OpenRISC 1200 project //// //// http://www.opencores.org/cores/or1k/ //// //// //// //// Description //// //// CPU's write-back stage of the pipeline //// //// //// //// To Do: //// //// - make it smaller and faster //// //// //// //// Author(s): //// //// - Damjan Lampret, lampret@opencores.org //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2000 Authors and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // // CVS Revision History // // $Log: not supported by cvs2svn $ // Revision 1.2 2002/03/29 15:16:56 lampret // Some of the warnings fixed. // // Revision 1.1 2002/01/03 08:16:15 lampret // New prefixes for RTL files, prefixed module names. Updated cache controllers and MMUs. // // Revision 1.8 2001/10/21 17:57:16 lampret // Removed params from generic_XX.v. Added translate_off/on in sprs.v and id.v. Removed spr_addr from dc.v and ic.v. Fixed CR+LF. // // Revision 1.7 2001/10/14 13:12:10 lampret // MP3 version. // // Revision 1.1.1.1 2001/10/06 10:18:36 igorm // no message // // Revision 1.2 2001/08/09 13:39:33 lampret // Major clean-up. // // Revision 1.1 2001/07/20 00:46:23 lampret // Development version of RTL. Libraries are missing. // // // synopsys translate_off `include "timescale.v" // synopsys translate_on `include "or1200_defines.v" module or1200_wbmux( // Clock and reset clk, rst, // Internal i/f wb_freeze, rfwb_op, muxin_a, muxin_b, muxin_c, muxin_d, muxout, muxreg, muxreg_valid ); parameter width = `OR1200_OPERAND_WIDTH; // // I/O // // // Clock and reset // input clk; input rst; // // Internal i/f // input wb_freeze; input [`OR1200_RFWBOP_WIDTH-1:0] rfwb_op; input [width-1:0] muxin_a; input [width-1:0] muxin_b; input [width-1:0] muxin_c; input [width-1:0] muxin_d; output [width-1:0] muxout; output [width-1:0] muxreg; output muxreg_valid; // // Internal wires and regs // reg [width-1:0] muxout; reg [width-1:0] muxreg; reg muxreg_valid; // // Registered output from the write-back multiplexer // always @(posedge clk or posedge rst) begin if (rst) begin muxreg <= #1 32'd0; muxreg_valid <= #1 1'b0; end else if (!wb_freeze) begin muxreg <= #1 muxout; muxreg_valid <= #1 rfwb_op[0]; end end // // Write-back multiplexer // always @(muxin_a or muxin_b or muxin_c or muxin_d or rfwb_op) begin `ifdef OR1200_ADDITIONAL_SYNOPSYS_DIRECTIVES case(rfwb_op[`OR1200_RFWBOP_WIDTH-1:1]) // synopsys parallel_case infer_mux `else case(rfwb_op[`OR1200_RFWBOP_WIDTH-1:1]) // synopsys parallel_case `endif 2'b00: muxout = muxin_a; 2'b01: begin muxout = muxin_b; `ifdef OR1200_VERBOSE // synopsys translate_off $display(" WBMUX: muxin_b %h", muxin_b); // synopsys translate_on `endif end 2'b10: begin muxout = muxin_c; `ifdef OR1200_VERBOSE // synopsys translate_off $display(" WBMUX: muxin_c %h", muxin_c); // synopsys translate_on `endif end 2'b11: begin muxout = muxin_d + 32'h8; `ifdef OR1200_VERBOSE // synopsys translate_off $display(" WBMUX: muxin_d %h", muxin_d + 4'h8); // synopsys translate_on `endif end endcase end endmodule
Go to most recent revision | Compare with Previous | Blame | View Log