Subversion Repositories openrisc_2011-10-31

/*
 * Examples of Synopsys Design Compiler
 * synthesis script for OR1200 IP core
 *
 */
 
TOPLEVEL = or1200_top
TECH = vs_umc18 	/* vs_umc18, art_umc18 */
CLK = clk_i
RST = rst_i
CLK_PERIOD = 5		/* 200 MHz */
MAX_AREA = 0		/* Push hard */
DO_UNGROUP = no 	/* yes, no */
DO_VERIFY = no		/* yes, no */
CLK_UNCERTAINTY = 0.1   /* 100 ps */
DFF_CKQ = 0.2		/* Clk to Q in technology time units */
DFF_SETUP = 0.1		/* Setup time in technology time units */
 
/* Starting timestamp */
sh date
 
/*
 * Set some basic variables related to environment
 *
 */
 
/* Enable Verilog HDL preprocessor */
hdlin_enable_vpp = true
 
/* Set log path */
LOG_PATH = "../log/"
 
/* Set gate-level netlist path */
GATE_PATH = "../out/"
 
/* Set RAMS_PATH */
RAMS_PATH = "../../../lib/"
 
/* Set RTL source path */
RTL_PATH = { "../../../rtl/verilog/" }
 
/* Optimize adders */
synlib_model_map_effort = high
hlo_share_effort = low
 
STAGE = final
 
/*
 * Load libraries
 *
 */
 
/* Search paths */
search_path = {. /libs/Artisan/aci/sc-x/synopsys/ } + \
                { /libs/Artisan/aci/sc-x/symbols/synopsys/ } + \
                { /libs/art_rams/ } + \
                { /libs/vs_rams/ /usr/dc/libraries/syn/ } + \
		{ /libs/Virtual_silicon/UMCL18U250D2_2.1/design_compiler/ }
 
/* Synthetic libraries */
snps = get_unix_variable("SYNOPSYS")
synthetic_library = { \
           snps + "/libraries/syn/dw01.sldb" \
           snps + "/libraries/syn/dw02.sldb" \
           snps + "/libraries/syn/dw03.sldb" \
           snps + "/libraries/syn/dw04.sldb" \
           snps + "/libraries/syn/dw05.sldb" \
           snps + "/libraries/syn/dw06.sldb" \
           snps + "/libraries/syn/dw07.sldb" }
 
/* Set Artisan Sage-X UMC 0.18u standard cell library */
if (TECH == "art_umc18") {
	target_library = { slow.db \
                        vs_hdsp_2048x32_wc_1.08V_125C.db \
                        vs_hdsp_2048x8_tc_1.2V_25C.db \
                        vs_hdsp_512x20_wc_1.08V_125C.db \
                        vs_hdsp_64x14_wc_1.08V_125C.db \
                        vs_hdsp_64x22_wc_1.08V_125C.db \
                        vs_hdsp_64x24_wc_1.08V_125C.db \
                        vs_hdtp_64x32_wc_1.08V_125C.db \
                        }
	symbol_library = { umc18.sdb }
}
 
/* Set Virtual Silicon UMC 0.18u standard cell library */
if (TECH == "vs_umc18") {
	target_library = { umcl18u250t2_wc.db \
                        vs_hdsp_2048x32_wc_1.08V_125C.db \
                        vs_hdsp_2048x8_wc_1.08V_125C.db \
                        vs_hdsp_512x20_wc_1.08V_125C.db \
                        vs_hdsp_64x14_wc_1.08V_125C.db \
                        vs_hdsp_64x22_wc_1.08V_125C.db \
                        vs_hdsp_64x24_wc_1.08V_125C.db \
                        vs_hdtp_64x32_wc_1.08V_125C.db \
                        }
	symbol_library = { umcl18u250t2.sdb }
}
 
link_library = target_library + synthetic_library
 
 
/*
 * Load HDL source files
 *
 */
include ../bin/read_design.inc		> LOG_PATH + read_design_ + TOPLEVEL + .log
 
/* Set design top */
current_design TOPLEVEL
 
/* Link all blocks and uniquify them */
link
uniquify
check_design				> LOG_PATH + check_design_ + TOPLEVEL + .log
 
/*
 * Apply constraints
 *
 */
if (TECH == "vs_umc18") {
	DFF_CELL = DFFPQ2
	LIB_DFF_D = umcl18u250t2_wc/DFFPQ2/D
	OPER_COND =  WORST
} else if (TECH == "art_umc18") {
	DFF_CELL = DFFHQX2
	LIB_DFF_D = slow/DFFHQX2/D
	OPER_COND =  slow
} else {
	echo "Error: Unsupported technology"
	exit
}
 
 
/* Clocks constraints */
create_clock dwb_clk_i -period CLK_PERIOD
create_clock iwb_clk_i -period CLK_PERIOD
create_clock CLK -period CLK_PERIOD
set_clock_skew all_clocks() -uncertainty CLK_UNCERTAINTY
set_dont_touch_network all_clocks()
 
/* Reset constraints */
set_driving_cell -none RST
set_drive 0 RST
set_dont_touch_network RST
 
/* All inputs except reset and clock */
all_inputs_wo_rst_clk = all_inputs() - CLK - RST
 
/* Set output delays and load for output signals
 *
 * All outputs are assumed to go directly into
 * external flip-flops for the purpose of this
 * synthesis
 */
set_output_delay DFF_SETUP -clock CLK all_outputs()
set_load load_of(LIB_DFF_D) * 4 all_outputs()
 
/* Input delay and driving cell of all inputs
 *
 * All these signals are assumed to come directly from
 * flip-flops for the purpose of this synthesis
 *
 */
set_input_delay DFF_CKQ -clock CLK all_inputs_wo_rst_clk
set_driving_cell -cell DFF_CELL -pin Q all_inputs_wo_rst_clk
 
/* Set design fanout */
/*
set_max_fanout 10 TOPLEVEL
*/
 
/* Optimize all near-critical paths to give extra slack for layout */
c_range = CLK_PERIOD * 0.10
group_path -critical_range c_range -name CLK -to CLK
 
/* Operating conditions */
set_operating_conditions OPER_COND
 
/* Lets do basic synthesis */
if (DO_UNGROUP == "yes") {
	ungroup -all
}
 
set_ultra_optimization -f
compile_new_optimization = true
/*
set_structure -boolean false -timing true
set_flatten -effort medium -minimize single_output
*/
 
/*
set_flatten false
*/
 
/*
 compile -boundary_optimization -map_effort medium -ungroup_all
*/
 compile -boundary_optimization -map_effort high -auto_ungroup
 
 
/*
compile -map_effort low
*/
 
/* Save current design using synopsys format */
write -hierarchy -format db -output GATE_PATH + STAGE + _ + TOPLEVEL + .db
 
/* Save current design using verilog format */
write -hierarchy -format verilog -output GATE_PATH + STAGE + _ + TOPLEVEL + .v
 
/* Basic reports */
report_area                     > LOG_PATH + STAGE + _ + TOPLEVEL + _area.log
report_timing -nworst 10        > LOG_PATH + STAGE + _ + TOPLEVEL + _timing.log
report_hierarchy                > LOG_PATH + STAGE + _ + TOPLEVEL + _hierarchy.log
report_resources                > LOG_PATH + STAGE + _ + TOPLEVEL + _resources.log
report_references               > LOG_PATH + STAGE + _ + TOPLEVEL + _references.log
report_constraint               > LOG_PATH + STAGE + _ + TOPLEVEL + _constraint.log
report_ultra_optimizations      > LOG_PATH + STAGE + _ + TOPLEVEL + _ultra_optimizations.log
/*
report_power                    > LOG_PATH + STAGE + _ + TOPLEVEL + _power.log
*/
 
 
/* Verify design */
if (DO_VERIFY == "yes") {
	compile -no_map -verify		> LOG_PATH + verify_ + TOPLEVEL + .log
}
 
/* Finish */
sh date
exit