URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [or1k_startup/] [rtl/] [verilog/] [spi_defines.v] - Rev 85
Go to most recent revision | Compare with Previous | Blame | View Log
////////////////////////////////////////////////////////////////////// //// //// //// spi_define.v //// //// //// //// This file is part of the SPI IP core project //// //// http://www.opencores.org/projects/spi/ //// //// //// //// Author(s): //// //// - Simon Srot (simons@opencores.org) //// //// //// //// All additional information is avaliable in the Readme.txt //// //// file. //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2002 Authors //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // // Number of bits used for devider register. If used in system with // low frequency of system clock this can be reduced. // Use SPI_DIVIDER_LEN for fine tuning theexact number. // `define SPI_DIVIDER_LEN_8 //`define SPI_DIVIDER_LEN_16 //`define SPI_DIVIDER_LEN_24 //`define SPI_DIVIDER_LEN_32 `ifdef SPI_DIVIDER_LEN_8 `define SPI_DIVIDER_LEN 4 // Can be set from 1 to 8 `endif `ifdef SPI_DIVIDER_LEN_16 `define SPI_DIVIDER_LEN 16 // Can be set from 9 to 16 `endif `ifdef SPI_DIVIDER_LEN_24 `define SPI_DIVIDER_LEN 24 // Can be set from 17 to 24 `endif `ifdef SPI_DIVIDER_LEN_32 `define SPI_DIVIDER_LEN 32 // Can be set from 25 to 32 `endif // // Maximum nuber of bits that can be send/received at once. // Use SPI_MAX_CHAR for fine tuning the exact number, when using // SPI_MAX_CHAR_32, SPI_MAX_CHAR_24, SPI_MAX_CHAR_16, SPI_MAX_CHAR_8. // //`define SPI_MAX_CHAR_128 //`define SPI_MAX_CHAR_64 `define SPI_MAX_CHAR_32 //`define SPI_MAX_CHAR_24 //`define SPI_MAX_CHAR_16 //`define SPI_MAX_CHAR_8 `ifdef SPI_MAX_CHAR_128 `define SPI_MAX_CHAR 128 // Can only be set to 128 `define SPI_CHAR_LEN_BITS 7 `endif `ifdef SPI_MAX_CHAR_64 `define SPI_MAX_CHAR 64 // Can only be set to 64 `define SPI_CHAR_LEN_BITS 6 `endif `ifdef SPI_MAX_CHAR_32 `define SPI_MAX_CHAR 32 // Can be set from 25 to 32 `define SPI_CHAR_LEN_BITS 6 `define SPI_CHAR_RST 32'h03000000 `endif `ifdef SPI_MAX_CHAR_24 `define SPI_MAX_CHAR 24 // Can be set from 17 to 24 `define SPI_CHAR_LEN_BITS 5 `endif `ifdef SPI_MAX_CHAR_16 `define SPI_MAX_CHAR 16 // Can be set from 9 to 16 `define SPI_CHAR_LEN_BITS 4 `endif `ifdef SPI_MAX_CHAR_8 `define SPI_MAX_CHAR 8 // Can be set from 1 to 8 `define SPI_CHAR_LEN_BITS 3 `endif // // Number of device select signals. Use SPI_SS_NB for fine tuning the // exact number. // `define SPI_SS_NB 2 // Can be set from 1 to 2 // // Bits of WISHBONE address used for partial decoding of SPI registers. // `define SPI_OFS_BITS 4:2 // // Register offset // `define SPI_RX_0 0 `define SPI_RX_1 1 `define SPI_RX_2 2 `define SPI_RX_3 3 `define SPI_TX_0 0 `define SPI_TX_1 1 `define SPI_TX_2 2 `define SPI_TX_3 3 `define SPI_CTRL 4 `define SPI_DEVIDE 5 `define SPI_SS 6 // // Number of bits in ctrl register // `define SPI_CTRL_BIT_NB 14 `define SPI_CTRL_BIT_RST 14'h420 // // Control register bits // //`define SPI_CTRL_LSB `define SPI_CTRL_TX_NEGEDGE //`define SPI_CTRL_RX_NEGEDGE
Go to most recent revision | Compare with Previous | Blame | View Log