URL
https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk
Subversion Repositories openrisc_2011-10-31
[/] [openrisc/] [trunk/] [or1k_startup/] [sw/] [OR1K_startup.S] - Rev 256
Go to most recent revision | Compare with Previous | Blame | View Log
/*
Register usage
R0 = 0
R1 = pointer to destination
R2 = nr of words to be copied
R3 = data
R4 = pointer to SPI core
R5 = spi control word
R6 = jump adr
R7 = nr of control words
r8 = adr pointer
*/
.equ spi_base,0xb0000000 ;
.equ spi_ctrl,0x0520 ;
.equ read_cmd, 0x03000000 ;
.global start ;
.text
start:
l.movhi r0,0x0 ;
l.ori r1,r0,0x0 ; # R1 = 0x0
l.movhi r4,hi(spi_base) ; # R4 = spi base
l.ori r5,r0,lo(spi_ctrl); # R5 = spi control
# set SPI regs, can be removed if reset state is changed in IP core
#l.ori r3,r0,0x420 ;
#l.sw 0x10(r4),r3 ; # tx at negedge, 32 bit transfer
#l.movhi r3,0x0300 ;
#l.ori r3,r3,0x0 ;
#l.sw 0x0(r4),r3 ; # TX = 0x03000000
#l.sw 0x14(r4),r0 ; # prescaler to zero
# set slave select active
l.ori r3,r0,0x1 ; # R3 = 0x1
# initiate SPI FLASH READ
l.jal read ;
l.sw 0x18(r4),r3 ; # ss active
# read
l.jal read ;
l.sw 0x0(r4),r0 ; # set TX to zero
l.or r2,r3,r3 ; # R2 = nr of words
loop1: l.jal read ; # read adr pointer
l.addi r1,r1,0x8 ;
l.jal read ; # read data
l.or r8,r3,r3 ; # copy adr pointer to r8
l.sfeq r8,r0 ;
l.bnf loop1 ;
l.sw 0x0(r8),r3 ; # write control data
loop2: l.jal read ;
l.addi r1,r1,0x4 ;
l.sw 0x0(r1),r3 ; # write to RAM
l.sfeq r1,r2 ;
l.bnf loop2 ;
l.ori r6,r0,0x100 ;
l.jr r6 ;
# set slave select inactive
l.sw 0x18(r4),r0 ; # set slave select inactive
read:
l.sw 0x10(r4),r5 ; # write spi control
w4busy: l.lwz r3,0x10(r4) ;
l.sfeqi r3,lo(spi_ctrl) ;
l.bf w4busy ;
l.nop ;
l.jr r9 ;
l.lwz r3,0x0(r4) ; # R3 = RX
Go to most recent revision | Compare with Previous | Blame | View Log