Subversion Repositories openrisc

              Or1ksim: The OpenRISC 1000 Architectural Simulator
              ==================================================


New in top of tree
==================

New features (shouldn't be there during a release cycle, but prompted by debug
needs elsewhere in the tool chain).

New option --trace provides a one line dump of instruction executed and any
register or memory location changed after each instruction.

A new configuration option "use_nmi" is added to the programmable interrupt
controller (PIC). This causes interrupt lines 0 and 1 to be non-maskable, but
only in the sense that the corresponding bits in PICMR are hard-wired to 1.

New config setting for memory initialization "exitnops" fills memory with
"l.nop 1", which will cause the simulator to exit. Good for tracking pointer
corruption.


New in release 0.5.0rc2
=======================

No new features. This is purely bug fixes post-0.5.0rc1.

The following bugs are fixed.
* Bug 1847: Build issues with RSP server (duplicate of 1815).
* Bug 1846: Casting errors.
* Bug 1824: Memory controller issue (marked as duplicate of Bug 1758).
* Bug 1816: Error message when target not set is obscure (duplicate of 1813).
* Bug 1815: Build errors with RSP server.
* Bug 1813: "make check" fails before installation.

The following bugs are outstanding
* Bug 1823: Configuration file error line numbers are wrong.
* Bug 1822: ATA configuration is broken. Documented in user guide.
* Bug 1758: Memory controller issues. Workaround in the user guide.


New in release 0.5.0rc1
=======================

The floating point implementation is now based on John Hauser's "softfloat"
package, ensuring rigorous compliance with the IEEE 754-2008 standard.

The library interface is extended to allow registers and memory to be written
directly and processor stalled and unstalled. This is to allow direct
integration as a simulator in GDB.

Some of the existing library interface functions have different prototypes.

The "include" feature of configuration files (which never worked, but no one
ever noticed) is dropped.

If the configuration file is not found in the local directory, it is searched
for in the ${HOME}/.or1ksim directory, then (for backwards compatibility) the
${HOME}/.or1k directory.

If no simulation file is specified, then sim.cfg is not searched for as a
default.

New options are added -q|--quiet, -V|--verbose, -m|--memory and
--report-memory-errors. The semantics of --nosrv and --src otpions are changed.

There is a configuration option to collect statistics on instruction execution
in binary form.

In previous versions, Bus exceptions were unique in that they produced an
error message on standard output. The default is now for this exception to be
handled silently, unless requested by --report-memory-errors.

The following feature requests have been accepted.
* Feature  393: Integrate Or1ksim in GDB.

The following bugs are fixed.
* Bug 1821: Reference configuration file has defective debug section.
* Bug 1817: Reference configuration file missing from distribution.
* Bug 1795: GDB breakpoints do not work with the instruction cache. 

The following bugs are either cannot be reproduced or will not be fixed.

The following bugs are outstanding
* Bug 1824: Memory controller issue (probably the same as Bug 1758).
* Bug 1823: Configuration file error line numbers are wrong.
* Bug 1822: ATA section in configuration file is broken.
* Bug 1816: Error message when target not set is obscure.
* Bug 1813: "make check" fails before installation.
* Bug 1758: Memory controller issues. Workaround in the user guide.


New in release 0.4.0
====================

No new features or bugs. This is the full release based on 0.4.0rc2.


New in release 0.4.0rc2
=======================

No new features are provided, pending full release of 0.4.0.

The configuration options --enable-arith-flag and --enable-ov-flag have been
removed, since they were the source of bugs, notably Bugs 1782, 1783 and 1784.

The configuration option --enable-unsigned-xori has been added to allow a
conditional solution to Bug 1790.

The following bugs are fixed.
* Bug 1770: l.div does not set carry or give correct exception.
* Bug 1771: l.add* do not correctly set the overflow flag.
* Bug 1772: l.fl1 not implemented.
* Bug 1773: l.maci not correctly implemented.
* Bug 1774: l.mulu not implemented.
* Bug 1775: l.jalr and l.jr don't trigger alignment exceptions.
* Bug 1776: l.addic is not implemented.
* Bug 1777: l.macrc not correctly implemented.
* Bug 1778: l.ror and l.rori are not implemented.
* Bug 1779: l.mtspr implementation is incorrect.
* Bug 1782: Or1ksim setting of overflow flag is wrong.
* Bug 1783: Or1ksim definition of overflow is wrong.
* Bug 1784: Or1ksim does not trigger overflow exceptions.
* Bug 1790: l.xori implementation is incorrect.

The following bugs are either cannot be reproduced or will not be fixed.

The following bugs are outstanding
* Bug 1758: Memory controller issues. Workaround in the user guide.


New in release 0.4.0rc1
=======================

The following new features are provided.
* testbench now renamed testsuite and fully integrated using DejaGNU.
  "make check" now works correctly if the OpenRISC toolchain is installed.
* New configuration flag --enable-all-tests to enable building of incomplete
  tests with "make check".
* The library offers an interface via modelled JTAG
* Single precision floating point is available.

The user guide is updated.

The following feature requests have been accepted.
* Feature  413: ORFPX32 single precision floating point now supported.
* Feature  469: Icache tags now intialized as invalid.
* Feature 1673: Or1ksim now builds on Mac OS X.
* Feature 1678: download, patch and build dirs removed from SVN.

The following feature requests have been rejected.
* Feature  399: Writeable SR_LEE bit will not be provided.
* Feature  409: Separate ELF loader library already exists in binutils.
* Feature  586: Ignoring HW breakpoints is already possible.

The following bugs are fixed.
* Bug  534: Test suite fixed (see above).
* Bug 1710: mprofile now handles mode args correctly.
* Bug 1723: PS2 keyboard error message clearer if RX file won't open.
* Bug 1733: Or1ksim now accepts ELF image when working through RSP.
* Bug 1767: l.lws is not recognized as an opcode.

The following bugs are either cannot be reproduced or will not be fixed.

The following bugs are outstanding
* Bug 1758: Memory controller issues. Workaround in the user guide.


New in release 0.3.0
====================

* No new features or bugs. This is the full release based on rc3.

New in release 0.3.0rc3
=======================

* Bug 376 fixed: 32 interrupts now supported
* Bug 377 fixed: Level triggered interrupts now work correctly
* Bug 378 fixed: xterm UART now works with RSP
* Bug 379 fixed: RSP performance improved
* Bug 380 fixed: GDB 6.8 stepi now works through Or1ksim JTAG interface
* Bug 398 fixed: Lack of support for LEE bit in SR documented
* Bug 415 fixed: NPC behavior on writing optionally matches real HW
* Bug 418 fixed: All library up calls are host-endian

* Feature 395 added: Boot from 0xf0000000 now enabled.
* Feature 408 added: Image file may be NULL for or1ksim_init.
* Feature 410 added: RSP now clears sigval on unstalling the processor.
* Feature 417 added: Or1ksim prints out its version on startup.

New in release 0.3.0rc2
=======================

* A number of bug fixes
* Updates to user guide

New in release 0.3.0rc1
=======================

* Numerous bug fixes (see the OpenRISC tracker and the ChangeLog file)
* User Guide
* Consistent coding style and file naming throughout
* Support for external SystemC models

New in release 1.9 (old style numbering)
========================================

* support for binary COFF
* generation of verilog memory models (used when you want to run simulation
of OpenRISC processor cores)

New in release 1.2 (old style numbering)
========================================

* support for OR16 ISA

New in release 1.1 (old style numbering)
========================================

 * First release