OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [or1ksim/] [brend-static.sh] - Rev 774

Go to most recent revision | Compare with Previous | Blame | View Log

#!/bin/bash
 
# Copyright (C) 2010 ORSoC AB
# Copyright (C) 2010 Embecosm Limited
 
# Contributor Julius Baxter <julius.baxter@orsoc.se>
# Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>
 
# This file is a superuser script to close down an Ethernet bridge and restore
# the simple Ethernet interface.
 
# This program is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by the Free
# Software Foundation; either version 3 of the License, or (at your option)
# any later version.
 
# This program is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
# more details.
 
# You should have received a copy of the GNU General Public License along
# with this program.  If not, see <http://www.gnu.org/licenses/>.          
 
# ------------------------------------------------------------------------------
 
# Pre-requisites: bridge-utils must be installed.
 
# Usage: ./brend-static.sh <bridge> <eth> <tap>
 
# - <bridge> is the bridge interface to use, e.g. br0
# - <eth> is the hardware ethernet interface to use, e.g. eth0
# - <tap> is the tap interface to use, e.g. tap0
 
# Check we have the right number of arguments
if [ "x$#" != "x3" ]
then
    echo "Usage: ./brend-static.sh <bridge> <eth> <tap>"
    exit 1
fi
 
# Check we are root
euid=`id -un`
if [ "x${euid}" != "xroot" ]
then
    echo "Must run as root"
    exit 1
fi
 
# Break out the arguments
br=$1
eth=$2
tap=$3
 
# Determine the IP address, netmask and broadcast of the bridge.
eth_ip=`ifconfig $br | \
        grep "inet addr" | \
        head -1 | \
        sed -e 's/^.*inet addr:\([^ \t]*\).*$/\1/'`
eth_netmask=`ifconfig $br | \
        grep "Mask" | \
        head -1 | \
        sed -e 's/^.*Mask:\([^ \t]*\).*$/\1/'`
eth_broadcast=`ifconfig $br | \
        grep "Bcast" | \
        head -1 | \
        sed -e 's/^.*Bcast:\([^ \t]*\).*$/\1/'`
 
# Close the firewall to the tap and bridge
iptables -D INPUT -i ${tap} -j ACCEPT
iptables -D INPUT -i ${br} -j ACCEPT
iptables -D FORWARD -i ${br} -j ACCEPT
 
# Take down the bridge and delete it
ifconfig ${br} down
 
if [ $? != 0 ]
then
    echo "Failed to take down ${br}"
    exit 1
fi
 
brctl delbr ${br}
 
if [ $? != 0 ]
then
    echo "Failed to take delete ${br}"
    exit 1
fi
 
# Delete the TAP interface. Note we mustn't have anything using it. It's
# rather harsh, but we use fuser to ensure this (it will take out all users of
# any TAP/TUN interface).
fuser -k /dev/net/tun
openvpn --rmtun --dev ${tap}
 
if [ $? != 0 ]
then
    echo "Failed to remove ${tap}"
    exit 1
fi
 
# Restore the Ethernet interface, using the IP address, netmask and broadcast
# mask from earlier.
ifconfig ${eth} ${eth_ip} netmask ${eth_netmask} broadcast ${eth_broadcast}
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.