OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [or1ksim/] [libtoplevel.c] - Rev 83

Go to most recent revision | Compare with Previous | Blame | View Log

/* libtoplevel.c -- Top level simulator library source file
 
   Copyright (C) 1999 Damjan Lampret, lampret@opencores.org
   Copyright (C) 2008 Embecosm Limited
 
   Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>
 
   This file is part of OpenRISC 1000 Architectural Simulator.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms of the GNU General Public License as published by the Free
   Software Foundation; either version 3 of the License, or (at your option)
   any later version.
 
   This program is distributed in the hope that it will be useful, but WITHOUT
   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
   more details.
 
   You should have received a copy of the GNU General Public License along
   with this program.  If not, see <http://www.gnu.org/licenses/>. */
 
/* This program is commented throughout in a fashion suitable for processing
   with Doxygen. */
 
 
/* Autoconf and/or portability configuration */
#include "config.h"
 
/* System includes */
#include <stdlib.h>
#include <unistd.h>
#include <signal.h>
 
/* Package includes */
#include "or1ksim.h"
#include "sim-config.h"
#include "toplevel-support.h"
#include "sched.h"
#include "execute.h"
#include "pic.h"
#include "jtag.h"
 
 
/*---------------------------------------------------------------------------*/
/*!Initialize the simulator. 
 
   Allows specification of an (optional) config file and an image file. Builds
   up dummy argc/argv to pass to the existing argument parser.
 
   @param[in] config_file  Or1ksim configuration file name
   @param[in] image_file   The program image to execute
   @param[in] class_ptr    Pointer to a C++ class instance (for use when
                           called by C++)
   @param[in] upr          Upcall routine for reads
   @param[in] upw          Upcall routine for writes
 
   @return  0 on success and an error code on failure                        */
/*---------------------------------------------------------------------------*/
int
or1ksim_init (const char *config_file,
	      const char *image_file,
	      void       *class_ptr,
	      unsigned long int (*upr) (void *class_ptr,
					unsigned long int addr,
					unsigned long int mask),
	      void (*upw) (void *class_ptr,
			   unsigned long int addr,
			   unsigned long int mask, unsigned long int wdata))
{
  int   dummy_argc;
  char *dummy_argv[4];
 
  /* Dummy argv array. Varies depending on whether an image file is
     specified. */
  dummy_argv[0] = "libsim";
  dummy_argv[1] = "-f";
  dummy_argv[2] = (char *) ((NULL != config_file) ? config_file : "sim.cfg");
  dummy_argv[3] = (char *) image_file;
 
  dummy_argc = (NULL == image_file) ? 3 : 4;
 
  /* Initialization copied from existing main() */
  srand (getpid ());
  init_defconfig ();
  reg_config_secs ();
 
  if (parse_args (dummy_argc, dummy_argv))
    {
      return OR1KSIM_RC_BADINIT;
    }
 
  config.sim.profile   = 0;	/* No profiling */
  config.sim.mprofile  = 0;
 
  config.ext.class_ptr = class_ptr;	/* SystemC linkage */
  config.ext.read_up   = upr;
  config.ext.write_up  = upw;
 
  print_config ();		/* Will go eventually */
  signal (SIGINT, ctrl_c);	/* Not sure we want this really */
 
  runtime.sim.hush = 1;		/* Not sure if this is needed */
  do_stats = config.cpu.superscalar ||
             config.cpu.dependstats ||
             config.sim.history     ||
             config.sim.exe_log;
 
  sim_init ();
 
  runtime.sim.ext_int_set = 0;	/* No interrupts pending to be set */
  runtime.sim.ext_int_clr = 0;	/* No interrupts pending to be cleared */
 
  return OR1KSIM_RC_OK;
 
}	/* or1ksim_init() */
 
 
/*---------------------------------------------------------------------------*/
/*!Run the simulator
 
   The argument is a time in seconds, which is converted to a number of
   cycles, if positive. A negative value means "run for ever".
 
   The semantics are that the duration for which the run may occur may be
   changed mid-run by a call to or1ksim_reset_duration(). This is to allow for
   the upcalls to generic components adding time, and reducing the time
   permitted for ISS execution before synchronization of the parent SystemC
   wrapper.
 
   This is over-ridden if the call was for a negative duration, which means
   run forever!
 
   Uses a simplified version of the old main program loop. Returns success if
   the requested number of cycles were run and an error code otherwise.
 
   @param[in] duration  Time to execute for (seconds)
 
   @return  OR1KSIM_RC_OK if we run to completion, OR1KSIM_RC_BRKPT if we hit
            a breakpoint (not clear how this can be set without CLI access)  */
/*---------------------------------------------------------------------------*/
int
or1ksim_run (double duration)
{
  const int  num_ints = sizeof (runtime.sim.ext_int_set) * 8;
 
  or1ksim_reset_duration (duration);
 
  /* Loop until we have done enough cycles (or forever if we had a negative
     duration) */
  while (duration < 0.0 || (runtime.sim.cycles < runtime.sim.end_cycles))
    {
      long long int time_start = runtime.sim.cycles;
      int i;			/* Interrupt # */
 
      /* Each cycle has counter of mem_cycles; this value is joined with cycles
       * at the end of the cycle; no sim originated memory accesses should be
       * performed in between. */
      runtime.sim.mem_cycles = 0;
 
      if (cpu_clock ())
	{
	  return OR1KSIM_RC_BRKPT;	/* Hit a breakpoint */
	}
 
      runtime.sim.cycles += runtime.sim.mem_cycles;
 
      /* Take any external interrupts. Outer test is for the common case for
         efficiency. */
      if (0 != runtime.sim.ext_int_set)
	{
	  for (i = 0; i < num_ints; i++)
	    {
	      if (0x1 == ((runtime.sim.ext_int_set >> i) & 0x1))
		{
		  report_interrupt (i);
		  runtime.sim.ext_int_set &= ~(1 << i);	/* Clear req flag */
		}
	    }
	}
 
      /* Clear any interrupts as requested. For edge triggered interrupts this
	 will happen in the same cycle. For level triggered, it must be an
	 explicit call. */
      if (0 != runtime.sim.ext_int_clr)
	{
	  for (i = 0; i < num_ints; i++)
	    {
	      /* Only clear interrupts that have been explicitly cleared */
	      if(0x1 == ((runtime.sim.ext_int_clr >> i) & 0x1))
		{
		  clear_interrupt(i);
		  runtime.sim.ext_int_clr &= ~(1 << i); /* Clear clr flag */
		}
	    }
	}
 
      /* Update the scheduler queue */
      scheduler.job_queue->time -= (runtime.sim.cycles - time_start);
 
      if (scheduler.job_queue->time <= 0)
	{
	  do_scheduler ();
	}
    }
 
  return  OR1KSIM_RC_OK;
 
}	/* or1ksim_run() */
 
 
/*---------------------------------------------------------------------------*/
/*!Reset the run-time simulation end point
 
  Reset the time for which the simulation should run to the specified duration
  from NOW (i.e. NOT from when the run started).
 
  @param[in] duration  Time to run for in seconds                            */
/*---------------------------------------------------------------------------*/
void
or1ksim_reset_duration (double duration)
{
  runtime.sim.end_cycles =
    runtime.sim.cycles +
    (long long int) (duration * 1.0e12 / (double) config.sim.clkcycle_ps);
 
}	/* or1ksim_reset_duration() */
 
 
/*---------------------------------------------------------------------------*/
/*!Return time executed so far
 
   Internal utility to return the time executed so far. Note that this is a
   re-entrant routine.
 
   @return  Time executed so far in seconds                                  */
/*---------------------------------------------------------------------------*/
static double
internal_or1ksim_time ()
{
  return (double) runtime.sim.cycles * (double) config.sim.clkcycle_ps /
    1.0e12;
 
}	// or1ksim_cycle_count()
 
 
/*---------------------------------------------------------------------------*/
/*!Mark a time point in the simulation
 
   Sets the internal parameter recording this point in the simulation        */
/*---------------------------------------------------------------------------*/
void
or1ksim_set_time_point ()
{
  runtime.sim.time_point = internal_or1ksim_time ();
 
}	/* or1ksim_set_time_point() */
 
 
/*---------------------------------------------------------------------------*/
/*!Return the time since the time point was set
 
  Get the value from the internal parameter                                  */
/*---------------------------------------------------------------------------*/
double
or1ksim_get_time_period ()
{
  return internal_or1ksim_time () - runtime.sim.time_point;
 
}	/* or1ksim_get_time_period() */
 
 
/*---------------------------------------------------------------------------*/
/*!Return the endianism of the model
 
   Note that this is a re-entrant routine.
 
   @return 1 if the model is little endian, 0 otherwise.                     */
/*---------------------------------------------------------------------------*/
int
or1ksim_is_le ()
{
#ifdef OR32_BIG_ENDIAN
  return 0;
#else
  return 1;
#endif
 
}	/* or1ksim_is_le() */
 
 
/*---------------------------------------------------------------------------*/
/*!Return the clock rate
 
   Value is part of the configuration
 
   @return  Clock rate in Hz.                                                */
/*---------------------------------------------------------------------------*/
unsigned long int
or1ksim_clock_rate ()
{
  return (unsigned long int) (1000000000000ULL /
			      (unsigned long long int) (config.sim.
							clkcycle_ps));
}	/* or1ksim_clock_rate() */
 
 
/*---------------------------------------------------------------------------*/
/*!Trigger an edge triggered interrupt
 
   This function is appropriate for edge triggered interrupts, which are taken
   and then immediately cleared.
 
   @note There is no check that the specified interrupt number is reasonable
   (i.e. <= 31).
 
   @param[in] i  The interrupt number                                        */
/*---------------------------------------------------------------------------*/
void
or1ksim_interrupt (int i)
{
  if (!config.pic.edge_trigger)
    {
      fprintf (stderr, "Warning: or1ksim_interrupt should not be used for "
	       "edge triggered interrupts. Ignored\n");
    }
  else
    {
      runtime.sim.ext_int_set |= 1 << i;	// Better not be > 31!
      runtime.sim.ext_int_clr |= 1 << i;	// Better not be > 31!
    }
}	/* or1ksim_interrupt() */
 
 
/*---------------------------------------------------------------------------*/
/*!Set a level triggered interrupt
 
   This function is appropriate for level triggered interrupts, which must be
   explicitly cleared in a separate call.
 
   @note There is no check that the specified interrupt number is reasonable
   (i.e. <= 31).
 
   @param[in] i  The interrupt number to set                                 */
/*---------------------------------------------------------------------------*/
void
or1ksim_interrupt_set (int i)
{
  if (config.pic.edge_trigger)
    {
      fprintf (stderr, "Warning: or1ksim_interrupt_set should not be used for "
	       "level triggered interrupts. Ignored\n");
    }
  else
    {
      runtime.sim.ext_int_set |= 1 << i;	// Better not be > 31!
    }
}	/* or1ksim_interrupt() */
 
 
/*---------------------------------------------------------------------------*/
/*!Clear a level triggered interrupt
 
   This function is appropriate for level triggered interrupts, which must be
   explicitly set first in a separate call.
 
   @note There is no check that the specified interrupt number is reasonable
   (i.e. <= 31).
 
   @param[in] i  The interrupt number to clear                               */
/*---------------------------------------------------------------------------*/
void
or1ksim_interrupt_clear (int i)
{
  if (config.pic.edge_trigger)
    {
      fprintf (stderr, "Warning: or1ksim_interrupt_clear should not be used "
	       "for level triggered interrupts. Ignored\n");
    }
  else
    {
      runtime.sim.ext_int_clr |= 1 << i;	// Better not be > 31!
    }
}	/* or1ksim_interrupt() */
 
 
/*---------------------------------------------------------------------------*/
/*!Reset the JTAG interface
 
   @note Like all the JTAG interface functions, this must not be called
         re-entrantly while a call to any other function (e.g. or1kim_run ())
         is in progress. It is the responsibility of the caller to ensure this
         constraint is met, for example by use of a SystemC mutex.
 
   @return  The time in seconds which the reset took.                        */
/*---------------------------------------------------------------------------*/
double
or1ksim_jtag_reset ()
{
  return  (double) jtag_reset () * (double) config.debug.jtagcycle_ps / 1.0e12;
 
}	/* or1ksim_jtag_reset () */
 
 
/*---------------------------------------------------------------------------*/
/*!Shift a JTAG instruction register
 
   @note Like all the JTAG interface functions, this must not be called
         re-entrantly while a call to any other function (e.g. or1kim_run ())
         is in progress. It is the responsibility of the caller to ensure this
         constraint is met, for example by use of a SystemC mutex.
 
   The register is represented as a vector of bytes, with the byte at offset
   zero being shifted first, and the least significant bit in each byte being
   shifted first. Where the register will not fit in an exact number of bytes,
   the odd bits are in the highest numbered byte, shifted to the low end.
 
   The only JTAG instruction for which we have any significant behavior in
   this model is DEBUG. For completeness the register is parsed and a warning
   given if any register other than DEBUG is shifted.
 
   @param[in,out] jreg  The register to shift in, and the register shifted
                        back out.
 
   @return  The time in seconds which the shift took.                        */
/*---------------------------------------------------------------------------*/
double
or1ksim_jtag_shift_ir (unsigned char *jreg)
{
  return  (double) jtag_shift_ir (jreg) * (double) config.debug.jtagcycle_ps /
          1.0e12;
 
}	/* or1ksim_jtag_shift_ir () */
 
 
/*---------------------------------------------------------------------------*/
/*!Shift a JTAG data register
 
   @note Like all the JTAG interface functions, this must not be called
         re-entrantly while a call to any other function (e.g. or1kim_run ())
         is in progress. It is the responsibility of the caller to ensure this
         constraint is met, for example by use of a SystemC mutex.
 
   The register is represented as a vector of bytes, with the byte at offset
   zero being shifted first, and the least significant bit in each byte being
   shifted first. Where the register will not fit in an exact number of bytes,
   the odd bits are in the highest numbered byte, shifted to the low end.
 
   The register is parsed to determine which of the six possible register
   types it could be.
   - MODULE_SELECT
   - WRITE_COMMNAND
   - READ_COMMAND
   - GO_COMMAND
   - WRITE_CONTROL
   - READ_CONTROL
 
   @note In practice READ_COMMAND is not used. However the functionality is
         provided for future compatibility.
 
   @param[in,out] jreg  The register to shift in, and the register shifted
                        back out.
 
   @return  The time in seconds which the shift took.                        */
/*---------------------------------------------------------------------------*/
double
or1ksim_jtag_shift_dr (unsigned char *jreg)
{
  return  (double) jtag_shift_dr (jreg) * (double) config.debug.jtagcycle_ps /
          1.0e12;
 
}	/* or1ksim_jtag_shift_dr () */
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.