URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [or1ksim/] [ltmain.sh] - Rev 68
Go to most recent revision | Compare with Previous | Blame | View Log
# ltmain.sh - Provide generalized library-building support services.
# NOTE: Changing this file will not affect anything until you rerun configure.
#
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
# 2007 Free Software Foundation, Inc.
# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
basename="s,^.*/,,g"
# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
# is ksh but when the shell is invoked as "sh" and the current value of
# the _XPG environment variable is not equal to 1 (one), the special
# positional parameter $0, within a function call, is the name of the
# function.
progpath="$0"
# The name of this program:
progname=`echo "$progpath" | $SED $basename`
modename="$progname"
# Global variables:
EXIT_SUCCESS=0
EXIT_FAILURE=1
PROGRAM=ltmain.sh
PACKAGE=libtool
VERSION=1.5.24
TIMESTAMP=" (1.1220.2.456 2007/06/24 02:25:32)"
# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
emulate sh
NULLCMD=:
# Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST
else
case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
fi
BIN_SH=xpg4; export BIN_SH # for Tru64
DUALCASE=1; export DUALCASE # for MKS sh
# Check that we have a working $echo.
if test "X$1" = X--no-reexec; then
# Discard the --no-reexec flag, and continue.
shift
elif test "X$1" = X--fallback-echo; then
# Avoid inline document here, it may be left over
:
elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
# Yippee, $echo works!
:
else
# Restart under the correct shell, and then maybe $echo will work.
exec $SHELL "$progpath" --no-reexec ${1+"$@"}
fi
if test "X$1" = X--fallback-echo; then
# used as fallback echo
shift
cat <<EOF
$*
EOF
exit $EXIT_SUCCESS
fi
default_mode=
help="Try \`$progname --help' for more information."
magic="%%%MAGIC variable%%%"
mkdir="mkdir"
mv="mv -f"
rm="rm -f"
# Sed substitution that helps us do robust quoting. It backslashifies
# metacharacters that are still active within double-quoted strings.
Xsed="${SED}"' -e 1s/^X//'
sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
# test EBCDIC or ASCII
case `echo X|tr X '\101'` in
A) # ASCII based system
# \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
SP2NL='tr \040 \012'
NL2SP='tr \015\012 \040\040'
;;
*) # EBCDIC based system
SP2NL='tr \100 \n'
NL2SP='tr \r\n \100\100'
;;
esac
# NLS nuisances.
# Only set LANG and LC_ALL to C if already set.
# These must not be set unconditionally because not all systems understand
# e.g. LANG=C (notably SCO).
# We save the old values to restore during execute mode.
for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
do
eval "if test \"\${$lt_var+set}\" = set; then
save_$lt_var=\$$lt_var
$lt_var=C
export $lt_var
fi"
done
# Make sure IFS has a sensible default
lt_nl='
'
IFS=" $lt_nl"
if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
$echo "$modename: not configured to build any kind of library" 1>&2
$echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
exit $EXIT_FAILURE
fi
# Global variables.
mode=$default_mode
nonopt=
prev=
prevopt=
run=
show="$echo"
show_help=
execute_dlfiles=
duplicate_deps=no
preserve_args=
lo2o="s/\\.lo\$/.${objext}/"
o2lo="s/\\.${objext}\$/.lo/"
extracted_archives=
extracted_serial=0
#####################################
# Shell function definitions:
# This seems to be the best place for them
# func_mktempdir [string]
# Make a temporary directory that won't clash with other running
# libtool processes, and avoids race conditions if possible. If
# given, STRING is the basename for that directory.
func_mktempdir ()
{
my_template="${TMPDIR-/tmp}/${1-$progname}"
if test "$run" = ":"; then
# Return a directory name, but don't create it in dry-run mode
my_tmpdir="${my_template}-$$"
else
# If mktemp works, use that first and foremost
my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
if test ! -d "$my_tmpdir"; then
# Failing that, at least try and use $RANDOM to avoid a race
my_tmpdir="${my_template}-${RANDOM-0}$$"
save_mktempdir_umask=`umask`
umask 0077
$mkdir "$my_tmpdir"
umask $save_mktempdir_umask
fi
# If we're not in dry-run mode, bomb out on failure
test -d "$my_tmpdir" || {
$echo "cannot create temporary directory \`$my_tmpdir'" 1>&2
exit $EXIT_FAILURE
}
fi
$echo "X$my_tmpdir" | $Xsed
}
# func_win32_libid arg
# return the library type of file 'arg'
#
# Need a lot of goo to handle *both* DLLs and import libs
# Has to be a shell function in order to 'eat' the argument
# that is supplied when $file_magic_command is called.
func_win32_libid ()
{
win32_libid_type="unknown"
win32_fileres=`file -L $1 2>/dev/null`
case $win32_fileres in
*ar\ archive\ import\ library*) # definitely import
win32_libid_type="x86 archive import"
;;
*ar\ archive*) # could be an import, or static
if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \
$EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
win32_nmres=`eval $NM -f posix -A $1 | \
$SED -n -e '1,100{
/ I /{
s,.*,import,
p
q
}
}'`
case $win32_nmres in
import*) win32_libid_type="x86 archive import";;
*) win32_libid_type="x86 archive static";;
esac
fi
;;
*DLL*)
win32_libid_type="x86 DLL"
;;
*executable*) # but shell scripts are "executable" too...
case $win32_fileres in
*MS\ Windows\ PE\ Intel*)
win32_libid_type="x86 DLL"
;;
esac
;;
esac
$echo $win32_libid_type
}
# func_infer_tag arg
# Infer tagged configuration to use if any are available and
# if one wasn't chosen via the "--tag" command line option.
# Only attempt this if the compiler in the base compile
# command doesn't match the default compiler.
# arg is usually of the form 'gcc ...'
func_infer_tag ()
{
if test -n "$available_tags" && test -z "$tagname"; then
CC_quoted=
for arg in $CC; do
case $arg in
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
arg="\"$arg\""
;;
esac
CC_quoted="$CC_quoted $arg"
done
case $@ in
# Blanks in the command may have been stripped by the calling shell,
# but not from the CC environment variable when configure was run.
" $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;;
# Blanks at the start of $base_compile will cause this to fail
# if we don't check for them as well.
*)
for z in $available_tags; do
if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
# Evaluate the configuration.
eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
CC_quoted=
for arg in $CC; do
# Double-quote args containing other shell metacharacters.
case $arg in
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
arg="\"$arg\""
;;
esac
CC_quoted="$CC_quoted $arg"
done
case "$@ " in
" $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*)
# The compiler in the base compile command matches
# the one in the tagged configuration.
# Assume this is the tagged configuration we want.
tagname=$z
break
;;
esac
fi
done
# If $tagname still isn't set, then no tagged configuration
# was found and let the user know that the "--tag" command
# line option must be used.
if test -z "$tagname"; then
$echo "$modename: unable to infer tagged configuration"
$echo "$modename: specify a tag with \`--tag'" 1>&2
exit $EXIT_FAILURE
# else
# $echo "$modename: using $tagname tagged configuration"
fi
;;
esac
fi
}
# func_extract_an_archive dir oldlib
func_extract_an_archive ()
{
f_ex_an_ar_dir="$1"; shift
f_ex_an_ar_oldlib="$1"
$show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)"
$run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $?
if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
:
else
$echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2
exit $EXIT_FAILURE
fi
}
# func_extract_archives gentop oldlib ...
func_extract_archives ()
{
my_gentop="$1"; shift
my_oldlibs=${1+"$@"}
my_oldobjs=""
my_xlib=""
my_xabs=""
my_xdir=""
my_status=""
$show "${rm}r $my_gentop"
$run ${rm}r "$my_gentop"
$show "$mkdir $my_gentop"
$run $mkdir "$my_gentop"
my_status=$?
if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then
exit $my_status
fi
for my_xlib in $my_oldlibs; do
# Extract the objects.
case $my_xlib in
[\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
*) my_xabs=`pwd`"/$my_xlib" ;;
esac
my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
my_xlib_u=$my_xlib
while :; do
case " $extracted_archives " in
*" $my_xlib_u "*)
extracted_serial=`expr $extracted_serial + 1`
my_xlib_u=lt$extracted_serial-$my_xlib ;;
*) break ;;
esac
done
extracted_archives="$extracted_archives $my_xlib_u"
my_xdir="$my_gentop/$my_xlib_u"
$show "${rm}r $my_xdir"
$run ${rm}r "$my_xdir"
$show "$mkdir $my_xdir"
$run $mkdir "$my_xdir"
exit_status=$?
if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then
exit $exit_status
fi
case $host in
*-darwin*)
$show "Extracting $my_xabs"
# Do not bother doing anything if just a dry run
if test -z "$run"; then
darwin_orig_dir=`pwd`
cd $my_xdir || exit $?
darwin_archive=$my_xabs
darwin_curdir=`pwd`
darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'`
darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null`
if test -n "$darwin_arches"; then
darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'`
darwin_arch=
$show "$darwin_base_archive has multiple architectures $darwin_arches"
for darwin_arch in $darwin_arches ; do
mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
func_extract_an_archive "`pwd`" "${darwin_base_archive}"
cd "$darwin_curdir"
$rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
done # $darwin_arches
## Okay now we have a bunch of thin objects, gotta fatten them up :)
darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP`
darwin_file=
darwin_files=
for darwin_file in $darwin_filelist; do
darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
lipo -create -output "$darwin_file" $darwin_files
done # $darwin_filelist
${rm}r unfat-$$
cd "$darwin_orig_dir"
else
cd "$darwin_orig_dir"
func_extract_an_archive "$my_xdir" "$my_xabs"
fi # $darwin_arches
fi # $run
;;
*)
func_extract_an_archive "$my_xdir" "$my_xabs"
;;
esac
my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
done
func_extract_archives_result="$my_oldobjs"
}
# End of Shell function definitions
#####################################
# Darwin sucks
eval std_shrext=\"$shrext_cmds\"
disable_libs=no
# Parse our command line options once, thoroughly.
while test "$#" -gt 0
do
arg="$1"
shift
case $arg in
-*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
*) optarg= ;;
esac
# If the previous option needs an argument, assign it.
if test -n "$prev"; then
case $prev in
execute_dlfiles)
execute_dlfiles="$execute_dlfiles $arg"
;;
tag)
tagname="$arg"
preserve_args="${preserve_args}=$arg"
# Check whether tagname contains only valid characters
case $tagname in
*[!-_A-Za-z0-9,/]*)
$echo "$progname: invalid tag name: $tagname" 1>&2
exit $EXIT_FAILURE
;;
esac
case $tagname in
CC)
# Don't test for the "default" C tag, as we know, it's there, but
# not specially marked.
;;
*)
if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then
taglist="$taglist $tagname"
# Evaluate the configuration.
eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`"
else
$echo "$progname: ignoring unknown tag $tagname" 1>&2
fi
;;
esac
;;
*)
eval "$prev=\$arg"
;;
esac
prev=
prevopt=
continue
fi
# Have we seen a non-optional argument yet?
case $arg in
--help)
show_help=yes
;;
--version)
echo "\
$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP
Copyright (C) 2007 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
exit $?
;;
--config)
${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath
# Now print the configurations for the tags.
for tagname in $taglist; do
${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath"
done
exit $?
;;
--debug)
$echo "$progname: enabling shell trace mode"
set -x
preserve_args="$preserve_args $arg"
;;
--dry-run | -n)
run=:
;;
--features)
$echo "host: $host"
if test "$build_libtool_libs" = yes; then
$echo "enable shared libraries"
else
$echo "disable shared libraries"
fi
if test "$build_old_libs" = yes; then
$echo "enable static libraries"
else
$echo "disable static libraries"
fi
exit $?
;;
--finish) mode="finish" ;;
--mode) prevopt="--mode" prev=mode ;;
--mode=*) mode="$optarg" ;;
--preserve-dup-deps) duplicate_deps="yes" ;;
--quiet | --silent)
show=:
preserve_args="$preserve_args $arg"
;;
--tag)
prevopt="--tag"
prev=tag
preserve_args="$preserve_args --tag"
;;
--tag=*)
set tag "$optarg" ${1+"$@"}
shift
prev=tag
preserve_args="$preserve_args --tag"
;;
-dlopen)
prevopt="-dlopen"
prev=execute_dlfiles
;;
-*)
$echo "$modename: unrecognized option \`$arg'" 1>&2
$echo "$help" 1>&2
exit $EXIT_FAILURE
;;
*)
nonopt="$arg"
break
;;
esac
done
if test -n "$prevopt"; then
$echo "$modename: option \`$prevopt' requires an argument" 1>&2
$echo "$help" 1>&2
exit $EXIT_FAILURE
fi
case $disable_libs in
no)
;;
shared)
build_libtool_libs=no
build_old_libs=yes
;;
static)
build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
;;
esac
# If this variable is set in any of the actions, the command in it
# will be execed at the end. This prevents here-documents from being
# left over by shells.
exec_cmd=
if test -z "$show_help"; then
# Infer the operation mode.
if test -z "$mode"; then
$echo "*** Warning: inferring the mode of operation is deprecated." 1>&2
$echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2
case $nonopt in
*cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*)
mode=link
for arg
do
case $arg in
-c)
mode=compile
break
;;
esac
done
;;
*db | *dbx | *strace | *truss)
mode=execute
;;
*install*|cp|mv)
mode=install
;;
*rm)
mode=uninstall
;;
*)
# If we have no mode, but dlfiles were specified, then do execute mode.
test -n "$execute_dlfiles" && mode=execute
# Just use the default operation mode.
if test -z "$mode"; then
if test -n "$nonopt"; then
$echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
else
$echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
fi
fi
;;
esac
fi
# Only execute mode is allowed to have -dlopen flags.
if test -n "$execute_dlfiles" && test "$mode" != execute; then
$echo "$modename: unrecognized option \`-dlopen'" 1>&2
$echo "$help" 1>&2
exit $EXIT_FAILURE
fi
# Change the help message to a mode-specific one.
generic_help="$help"
help="Try \`$modename --help --mode=$mode' for more information."
# These modes are in order of execution frequency so that they run quickly.
case $mode in
# libtool compile mode
compile)
modename="$modename: compile"
# Get the compilation command and the source file.
base_compile=
srcfile="$nonopt" # always keep a non-empty value in "srcfile"
suppress_opt=yes
suppress_output=
arg_mode=normal
libobj=
later=
for arg
do
case $arg_mode in
arg )
# do not "continue". Instead, add this to base_compile
lastarg="$arg"
arg_mode=normal
;;
target )
libobj="$arg"
arg_mode=normal
continue
;;
normal )
# Accept any command-line options.
case $arg in
-o)
if test -n "$libobj" ; then
$echo "$modename: you cannot specify \`-o' more than once" 1>&2
exit $EXIT_FAILURE
fi
arg_mode=target
continue
;;
-static | -prefer-pic | -prefer-non-pic)
later="$later $arg"
continue
;;
-no-suppress)
suppress_opt=no
continue
;;
-Xcompiler)
arg_mode=arg # the next one goes into the "base_compile" arg list
continue # The current "srcfile" will either be retained or
;; # replaced later. I would guess that would be a bug.
-Wc,*)
args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
lastarg=
save_ifs="$IFS"; IFS=','
for arg in $args; do
IFS="$save_ifs"
# Double-quote args containing other shell metacharacters.
# Many Bourne shells cannot handle close brackets correctly
# in scan sets, so we specify it separately.
case $arg in
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
arg="\"$arg\""
;;
esac
lastarg="$lastarg $arg"
done
IFS="$save_ifs"
lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
# Add the arguments to base_compile.
base_compile="$base_compile $lastarg"
continue
;;
* )
# Accept the current argument as the source file.
# The previous "srcfile" becomes the current argument.
#
lastarg="$srcfile"
srcfile="$arg"
;;
esac # case $arg
;;
esac # case $arg_mode
# Aesthetically quote the previous argument.
lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
case $lastarg in
# Double-quote args containing other shell metacharacters.
# Many Bourne shells cannot handle close brackets correctly
# in scan sets, and some SunOS ksh mistreat backslash-escaping
# in scan sets (worked around with variable expansion),
# and furthermore cannot handle '|' '&' '(' ')' in scan sets
# at all, so we specify them separately.
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
lastarg="\"$lastarg\""
;;
esac
base_compile="$base_compile $lastarg"
done # for arg
case $arg_mode in
arg)
$echo "$modename: you must specify an argument for -Xcompile"
exit $EXIT_FAILURE
;;
target)
$echo "$modename: you must specify a target with \`-o'" 1>&2
exit $EXIT_FAILURE
;;
*)
# Get the name of the library object.
[ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
;;
esac
# Recognize several different file suffixes.
# If the user specifies -o file.o, it is replaced with file.lo
xform='[cCFSifmso]'
case $libobj in
*.ada) xform=ada ;;
*.adb) xform=adb ;;
*.ads) xform=ads ;;
*.asm) xform=asm ;;
*.c++) xform=c++ ;;
*.cc) xform=cc ;;
*.ii) xform=ii ;;
*.class) xform=class ;;
*.cpp) xform=cpp ;;
*.cxx) xform=cxx ;;
*.[fF][09]?) xform=[fF][09]. ;;
*.for) xform=for ;;
*.java) xform=java ;;
*.obj) xform=obj ;;
esac
libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
case $libobj in
*.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
*)
$echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
exit $EXIT_FAILURE
;;
esac
func_infer_tag $base_compile
for arg in $later; do
case $arg in
-static)
build_old_libs=yes
continue
;;
-prefer-pic)
pic_mode=yes
continue
;;
-prefer-non-pic)
pic_mode=no
continue
;;
esac
done
qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"`
case $qlibobj in
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
qlibobj="\"$qlibobj\"" ;;
esac
test "X$libobj" != "X$qlibobj" \
&& $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' &()|`$[]' \
&& $echo "$modename: libobj name \`$libobj' may not contain shell special characters."
objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
if test "X$xdir" = "X$obj"; then
xdir=
else
xdir=$xdir/
fi
lobj=${xdir}$objdir/$objname
if test -z "$base_compile"; then
$echo "$modename: you must specify a compilation command" 1>&2
$echo "$help" 1>&2
exit $EXIT_FAILURE
fi
# Delete any leftover library objects.
if test "$build_old_libs" = yes; then
removelist="$obj $lobj $libobj ${libobj}T"
else
removelist="$lobj $libobj ${libobj}T"
fi
$run $rm $removelist
trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
# On Cygwin there's no "real" PIC flag so we must build both object types
case $host_os in
cygwin* | mingw* | pw32* | os2*)
pic_mode=default
;;
esac
if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
# non-PIC code in shared libraries is not supported
pic_mode=default
fi
# Calculate the filename of the output object if compiler does
# not support -o with -c
if test "$compiler_c_o" = no; then
output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
lockfile="$output_obj.lock"
removelist="$removelist $output_obj $lockfile"
trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
else
output_obj=
need_locks=no
lockfile=
fi
# Lock this critical section if it is needed
# We use this script file to make the link, it avoids creating a new file
if test "$need_locks" = yes; then
until $run ln "$progpath" "$lockfile" 2>/dev/null; do
$show "Waiting for $lockfile to be removed"
sleep 2
done
elif test "$need_locks" = warn; then
if test -f "$lockfile"; then
$echo "\
*** ERROR, $lockfile exists and contains:
`cat $lockfile 2>/dev/null`
This indicates that another process is trying to use the same
temporary object file, and libtool could not work around it because
your compiler does not support \`-c' and \`-o' together. If you
repeat this compilation, it may succeed, by chance, but you had better
avoid parallel builds (make -j) in this platform, or get a better
compiler."
$run $rm $removelist
exit $EXIT_FAILURE
fi
$echo "$srcfile" > "$lockfile"
fi
if test -n "$fix_srcfile_path"; then
eval srcfile=\"$fix_srcfile_path\"
fi
qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"`
case $qsrcfile in
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
qsrcfile="\"$qsrcfile\"" ;;
esac
$run $rm "$libobj" "${libobj}T"
# Create a libtool object file (analogous to a ".la" file),
# but don't create it if we're doing a dry run.
test -z "$run" && cat > ${libobj}T <<EOF
# $libobj - a libtool object file
# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
#
# Please DO NOT delete this file!
# It is necessary for linking the library.
# Name of the PIC object.
EOF
# Only build a PIC object if we are building libtool libraries.
if test "$build_libtool_libs" = yes; then
# Without this assignment, base_compile gets emptied.
fbsd_hideous_sh_bug=$base_compile
if test "$pic_mode" != no; then
command="$base_compile $qsrcfile $pic_flag"
else
# Don't build PIC code
command="$base_compile $qsrcfile"
fi
if test ! -d "${xdir}$objdir"; then
$show "$mkdir ${xdir}$objdir"
$run $mkdir ${xdir}$objdir
exit_status=$?
if test "$exit_status" -ne 0 && test ! -d "${xdir}$objdir"; then
exit $exit_status
fi
fi
if test -z "$output_obj"; then
# Place PIC objects in $objdir
command="$command -o $lobj"
fi
$run $rm "$lobj" "$output_obj"
$show "$command"
if $run eval "$command"; then :
else
test -n "$output_obj" && $run $rm $removelist
exit $EXIT_FAILURE
fi
if test "$need_locks" = warn &&
test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
$echo "\
*** ERROR, $lockfile contains:
`cat $lockfile 2>/dev/null`
but it should contain:
$srcfile
This indicates that another process is trying to use the same
temporary object file, and libtool could not work around it because
your compiler does not support \`-c' and \`-o' together. If you
repeat this compilation, it may succeed, by chance, but you had better
avoid parallel builds (make -j) in this platform, or get a better
compiler."
$run $rm $removelist
exit $EXIT_FAILURE
fi
# Just move the object if needed, then go on to compile the next one
if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
$show "$mv $output_obj $lobj"
if $run $mv $output_obj $lobj; then :
else
error=$?
$run $rm $removelist
exit $error
fi
fi
# Append the name of the PIC object to the libtool object file.
test -z "$run" && cat >> ${libobj}T <<EOF
pic_object='$objdir/$objname'
EOF
# Allow error messages only from the first compilation.
if test "$suppress_opt" = yes; then
suppress_output=' >/dev/null 2>&1'
fi
else
# No PIC object so indicate it doesn't exist in the libtool
# object file.
test -z "$run" && cat >> ${libobj}T <<EOF
pic_object=none
EOF
fi
# Only build a position-dependent object if we build old libraries.
if test "$build_old_libs" = yes; then
if test "$pic_mode" != yes; then
# Don't build PIC code
command="$base_compile $qsrcfile"
else
command="$base_compile $qsrcfile $pic_flag"
fi
if test "$compiler_c_o" = yes; then
command="$command -o $obj"
fi
# Suppress compiler output if we already did a PIC compilation.
command="$command$suppress_output"
$run $rm "$obj" "$output_obj"
$show "$command"
if $run eval "$command"; then :
else
$run $rm $removelist
exit $EXIT_FAILURE
fi
if test "$need_locks" = warn &&
test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
$echo "\
*** ERROR, $lockfile contains:
`cat $lockfile 2>/dev/null`
but it should contain:
$srcfile
This indicates that another process is trying to use the same
temporary object file, and libtool could not work around it because
your compiler does not support \`-c' and \`-o' together. If you
repeat this compilation, it may succeed, by chance, but you had better
avoid parallel builds (make -j) in this platform, or get a better
compiler."
$run $rm $removelist
exit $EXIT_FAILURE
fi
# Just move the object if needed
if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
$show "$mv $output_obj $obj"
if $run $mv $output_obj $obj; then :
else
error=$?
$run $rm $removelist
exit $error
fi
fi
# Append the name of the non-PIC object the libtool object file.
# Only append if the libtool object file exists.
test -z "$run" && cat >> ${libobj}T <<EOF
# Name of the non-PIC object.
non_pic_object='$objname'
EOF
else
# Append the name of the non-PIC object the libtool object file.
# Only append if the libtool object file exists.
test -z "$run" && cat >> ${libobj}T <<EOF
# Name of the non-PIC object.
non_pic_object=none
EOF
fi
$run $mv "${libobj}T" "${libobj}"
# Unlock the critical section if it was locked
if test "$need_locks" != no; then
$run $rm "$lockfile"
fi
exit $EXIT_SUCCESS
;;
# libtool link mode
link | relink)
modename="$modename: link"
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
# It is impossible to link a dll without this setting, and
# we shouldn't force the makefile maintainer to figure out
# which system we are compiling for in order to pass an extra
# flag for every libtool invocation.
# allow_undefined=no
# FIXME: Unfortunately, there are problems with the above when trying
# to make a dll which has undefined symbols, in which case not
# even a static library is built. For now, we need to specify
# -no-undefined on the libtool link line when we can be certain
# that all symbols are satisfied, otherwise we get a static library.
allow_undefined=yes
;;
*)
allow_undefined=yes
;;
esac
libtool_args="$nonopt"
base_compile="$nonopt $@"
compile_command="$nonopt"
finalize_command="$nonopt"
compile_rpath=
finalize_rpath=
compile_shlibpath=
finalize_shlibpath=
convenience=
old_convenience=
deplibs=
old_deplibs=
compiler_flags=
linker_flags=
dllsearchpath=
lib_search_path=`pwd`
inst_prefix_dir=
avoid_version=no
dlfiles=
dlprefiles=
dlself=no
export_dynamic=no
export_symbols=
export_symbols_regex=
generated=
libobjs=
ltlibs=
module=no
no_install=no
objs=
non_pic_objects=
notinst_path= # paths that contain not-installed libtool libraries
precious_files_regex=
prefer_static_libs=no
preload=no
prev=
prevarg=
release=
rpath=
xrpath=
perm_rpath=
temp_rpath=
thread_safe=no
vinfo=
vinfo_number=no
func_infer_tag $base_compile
# We need to know -static, to get the right output filenames.
for arg
do
case $arg in
-all-static | -static | -static-libtool-libs)
case $arg in
-all-static)
if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
$echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
fi
if test -n "$link_static_flag"; then
dlopen_self=$dlopen_self_static
fi
prefer_static_libs=yes
;;
-static)
if test -z "$pic_flag" && test -n "$link_static_flag"; then
dlopen_self=$dlopen_self_static
fi
prefer_static_libs=built
;;
-static-libtool-libs)
if test -z "$pic_flag" && test -n "$link_static_flag"; then
dlopen_self=$dlopen_self_static
fi
prefer_static_libs=yes
;;
esac
build_libtool_libs=no
build_old_libs=yes
break
;;
esac
done
# See if our shared archives depend on static archives.
test -n "$old_archive_from_new_cmds" && build_old_libs=yes
# Go through the arguments, transforming them on the way.
while test "$#" -gt 0; do
arg="$1"
shift
case $arg in
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
;;
*) qarg=$arg ;;
esac
libtool_args="$libtool_args $qarg"
# If the previous option needs an argument, assign it.
if test -n "$prev"; then
case $prev in
output)
compile_command="$compile_command @OUTPUT@"
finalize_command="$finalize_command @OUTPUT@"
;;
esac
case $prev in
dlfiles|dlprefiles)
if test "$preload" = no; then
# Add the symbol object into the linking commands.
compile_command="$compile_command @SYMFILE@"
finalize_command="$finalize_command @SYMFILE@"
preload=yes
fi
case $arg in
*.la | *.lo) ;; # We handle these cases below.
force)
if test "$dlself" = no; then
dlself=needless
export_dynamic=yes
fi
prev=
continue
;;
self)
if test "$prev" = dlprefiles; then
dlself=yes
elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
dlself=yes
else
dlself=needless
export_dynamic=yes
fi
prev=
continue
;;
*)
if test "$prev" = dlfiles; then
dlfiles="$dlfiles $arg"
else
dlprefiles="$dlprefiles $arg"
fi
prev=
continue
;;
esac
;;
expsyms)
export_symbols="$arg"
if test ! -f "$arg"; then
$echo "$modename: symbol file \`$arg' does not exist"
exit $EXIT_FAILURE
fi
prev=
continue
;;
expsyms_regex)
export_symbols_regex="$arg"
prev=
continue
;;
inst_prefix)
inst_prefix_dir="$arg"
prev=
continue
;;
precious_regex)
precious_files_regex="$arg"
prev=
continue
;;
release)
release="-$arg"
prev=
continue
;;
objectlist)
if test -f "$arg"; then
save_arg=$arg
moreargs=
for fil in `cat $save_arg`
do
# moreargs="$moreargs $fil"
arg=$fil
# A libtool-controlled object.
# Check to see that this really is a libtool object.
if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
pic_object=
non_pic_object=
# Read the .lo file
# If there is no directory component, then add one.
case $arg in
*/* | *\\*) . $arg ;;
*) . ./$arg ;;
esac
if test -z "$pic_object" || \
test -z "$non_pic_object" ||
test "$pic_object" = none && \
test "$non_pic_object" = none; then
$echo "$modename: cannot find name of object for \`$arg'" 1>&2
exit $EXIT_FAILURE
fi
# Extract subdirectory from the argument.
xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
if test "X$xdir" = "X$arg"; then
xdir=
else
xdir="$xdir/"
fi
if test "$pic_object" != none; then
# Prepend the subdirectory the object is found in.
pic_object="$xdir$pic_object"
if test "$prev" = dlfiles; then
if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
dlfiles="$dlfiles $pic_object"
prev=
continue
else
# If libtool objects are unsupported, then we need to preload.
prev=dlprefiles
fi
fi
# CHECK ME: I think I busted this. -Ossama
if test "$prev" = dlprefiles; then
# Preload the old-style object.
dlprefiles="$dlprefiles $pic_object"
prev=
fi
# A PIC object.
libobjs="$libobjs $pic_object"
arg="$pic_object"
fi
# Non-PIC object.
if test "$non_pic_object" != none; then
# Prepend the subdirectory the object is found in.
non_pic_object="$xdir$non_pic_object"
# A standard non-PIC object
non_pic_objects="$non_pic_objects $non_pic_object"
if test -z "$pic_object" || test "$pic_object" = none ; then
arg="$non_pic_object"
fi
else
# If the PIC object exists, use it instead.
# $xdir was prepended to $pic_object above.
non_pic_object="$pic_object"
non_pic_objects="$non_pic_objects $non_pic_object"
fi
else
# Only an error if not doing a dry-run.
if test -z "$run"; then
$echo "$modename: \`$arg' is not a valid libtool object" 1>&2
exit $EXIT_FAILURE
else
# Dry-run case.
# Extract subdirectory from the argument.
xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
if test "X$xdir" = "X$arg"; then
xdir=
else
xdir="$xdir/"
fi
pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
libobjs="$libobjs $pic_object"
non_pic_objects="$non_pic_objects $non_pic_object"
fi
fi
done
else
$echo "$modename: link input file \`$save_arg' does not exist"
exit $EXIT_FAILURE
fi
arg=$save_arg
prev=
continue
;;
rpath | xrpath)
# We need an absolute path.
case $arg in
[\\/]* | [A-Za-z]:[\\/]*) ;;
*)
$echo "$modename: only absolute run-paths are allowed" 1>&2
exit $EXIT_FAILURE
;;
esac
if test "$prev" = rpath; then
case "$rpath " in
*" $arg "*) ;;
*) rpath="$rpath $arg" ;;
esac
else
case "$xrpath " in
*" $arg "*) ;;
*) xrpath="$xrpath $arg" ;;
esac
fi
prev=
continue
;;
xcompiler)
compiler_flags="$compiler_flags $qarg"
prev=
compile_command="$compile_command $qarg"
finalize_command="$finalize_command $qarg"
continue
;;
xlinker)
linker_flags="$linker_flags $qarg"
compiler_flags="$compiler_flags $wl$qarg"
prev=
compile_command="$compile_command $wl$qarg"
finalize_command="$finalize_command $wl$qarg"
continue
;;
xcclinker)
linker_flags="$linker_flags $qarg"
compiler_flags="$compiler_flags $qarg"
prev=
compile_command="$compile_command $qarg"
finalize_command="$finalize_command $qarg"
continue
;;
shrext)
shrext_cmds="$arg"
prev=
continue
;;
darwin_framework|darwin_framework_skip)
test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg"
compile_command="$compile_command $arg"
finalize_command="$finalize_command $arg"
prev=
continue
;;
*)
eval "$prev=\"\$arg\""
prev=
continue
;;
esac
fi # test -n "$prev"
prevarg="$arg"
case $arg in
-all-static)
if test -n "$link_static_flag"; then
compile_command="$compile_command $link_static_flag"
finalize_command="$finalize_command $link_static_flag"
fi
continue
;;
-allow-undefined)
# FIXME: remove this flag sometime in the future.
$echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
continue
;;
-avoid-version)
avoid_version=yes
continue
;;
-dlopen)
prev=dlfiles
continue
;;
-dlpreopen)
prev=dlprefiles
continue
;;
-export-dynamic)
export_dynamic=yes
continue
;;
-export-symbols | -export-symbols-regex)
if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
$echo "$modename: more than one -exported-symbols argument is not allowed"
exit $EXIT_FAILURE
fi
if test "X$arg" = "X-export-symbols"; then
prev=expsyms
else
prev=expsyms_regex
fi
continue
;;
-framework|-arch|-isysroot)
case " $CC " in
*" ${arg} ${1} "* | *" ${arg} ${1} "*)
prev=darwin_framework_skip ;;
*) compiler_flags="$compiler_flags $arg"
prev=darwin_framework ;;
esac
compile_command="$compile_command $arg"
finalize_command="$finalize_command $arg"
continue
;;
-inst-prefix-dir)
prev=inst_prefix
continue
;;
# The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
# so, if we see these flags be careful not to treat them like -L
-L[A-Z][A-Z]*:*)
case $with_gcc/$host in
no/*-*-irix* | /*-*-irix*)
compile_command="$compile_command $arg"
finalize_command="$finalize_command $arg"
;;
esac
continue
;;
-L*)
dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
# We need an absolute path.
case $dir in
[\\/]* | [A-Za-z]:[\\/]*) ;;
*)
absdir=`cd "$dir" && pwd`
if test -z "$absdir"; then
$echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
absdir="$dir"
notinst_path="$notinst_path $dir"
fi
dir="$absdir"
;;
esac
case "$deplibs " in
*" -L$dir "*) ;;
*)
deplibs="$deplibs -L$dir"
lib_search_path="$lib_search_path $dir"
;;
esac
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'`
case :$dllsearchpath: in
*":$dir:"*) ;;
*) dllsearchpath="$dllsearchpath:$dir";;
esac
case :$dllsearchpath: in
*":$testbindir:"*) ;;
*) dllsearchpath="$dllsearchpath:$testbindir";;
esac
;;
esac
continue
;;
-l*)
if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*)
# These systems don't actually have a C or math library (as such)
continue
;;
*-*-os2*)
# These systems don't actually have a C library (as such)
test "X$arg" = "X-lc" && continue
;;
*-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
# Do not include libc due to us having libc/libc_r.
test "X$arg" = "X-lc" && continue
;;
*-*-rhapsody* | *-*-darwin1.[012])
# Rhapsody C and math libraries are in the System framework
deplibs="$deplibs -framework System"
continue
;;
*-*-sco3.2v5* | *-*-sco5v6*)
# Causes problems with __ctype
test "X$arg" = "X-lc" && continue
;;
*-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
# Compiler inserts libc in the correct place for threads to work
test "X$arg" = "X-lc" && continue
;;
esac
elif test "X$arg" = "X-lc_r"; then
case $host in
*-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
# Do not include libc_r directly, use -pthread flag.
continue
;;
esac
fi
deplibs="$deplibs $arg"
continue
;;
# Tru64 UNIX uses -model [arg] to determine the layout of C++
# classes, name mangling, and exception handling.
-model)
compile_command="$compile_command $arg"
compiler_flags="$compiler_flags $arg"
finalize_command="$finalize_command $arg"
prev=xcompiler
continue
;;
-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
compiler_flags="$compiler_flags $arg"
compile_command="$compile_command $arg"
finalize_command="$finalize_command $arg"
continue
;;
-module)
module=yes
continue
;;
# -64, -mips[0-9] enable 64-bit mode on the SGI compiler
# -r[0-9][0-9]* specifies the processor on the SGI compiler
# -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
# +DA*, +DD* enable 64-bit mode on the HP compiler
# -q* pass through compiler args for the IBM compiler
# -m* pass through architecture-specific compiler args for GCC
# -m*, -t[45]*, -txscale* pass through architecture-specific
# compiler args for GCC
# -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
# -F/path gives path to uninstalled frameworks, gcc on darwin
# @file GCC response files
-64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
-t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*)
# Unknown arguments in both finalize_command and compile_command need
# to be aesthetically quoted because they are evaled later.
arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
case $arg in
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
arg="\"$arg\""
;;
esac
compile_command="$compile_command $arg"
finalize_command="$finalize_command $arg"
compiler_flags="$compiler_flags $arg"
continue
;;
-shrext)
prev=shrext
continue
;;
-no-fast-install)
fast_install=no
continue
;;
-no-install)
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin*)
# The PATH hackery in wrapper scripts is required on Windows
# and Darwin in order for the loader to find any dlls it needs.
$echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
$echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
fast_install=no
;;
*) no_install=yes ;;
esac
continue
;;
-no-undefined)
allow_undefined=no
continue
;;
-objectlist)
prev=objectlist
continue
;;
-o) prev=output ;;
-precious-files-regex)
prev=precious_regex
continue
;;
-release)
prev=release
continue
;;
-rpath)
prev=rpath
continue
;;
-R)
prev=xrpath
continue
;;
-R*)
dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
# We need an absolute path.
case $dir in
[\\/]* | [A-Za-z]:[\\/]*) ;;
*)
$echo "$modename: only absolute run-paths are allowed" 1>&2
exit $EXIT_FAILURE
;;
esac
case "$xrpath " in
*" $dir "*) ;;
*) xrpath="$xrpath $dir" ;;
esac
continue
;;
-static | -static-libtool-libs)
# The effects of -static are defined in a previous loop.
# We used to do the same as -all-static on platforms that
# didn't have a PIC flag, but the assumption that the effects
# would be equivalent was wrong. It would break on at least
# Digital Unix and AIX.
continue
;;
-thread-safe)
thread_safe=yes
continue
;;
-version-info)
prev=vinfo
continue
;;
-version-number)
prev=vinfo
vinfo_number=yes
continue
;;
-Wc,*)
args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
arg=
save_ifs="$IFS"; IFS=','
for flag in $args; do
IFS="$save_ifs"
case $flag in
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
flag="\"$flag\""
;;
esac
arg="$arg $wl$flag"
compiler_flags="$compiler_flags $flag"
done
IFS="$save_ifs"
arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
;;
-Wl,*)
args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
arg=
save_ifs="$IFS"; IFS=','
for flag in $args; do
IFS="$save_ifs"
case $flag in
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
flag="\"$flag\""
;;
esac
arg="$arg $wl$flag"
compiler_flags="$compiler_flags $wl$flag"
linker_flags="$linker_flags $flag"
done
IFS="$save_ifs"
arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
;;
-Xcompiler)
prev=xcompiler
continue
;;
-Xlinker)
prev=xlinker
continue
;;
-XCClinker)
prev=xcclinker
continue
;;
# Some other compiler flag.
-* | +*)
# Unknown arguments in both finalize_command and compile_command need
# to be aesthetically quoted because they are evaled later.
arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
case $arg in
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
arg="\"$arg\""
;;
esac
;;
*.$objext)
# A standard object.
objs="$objs $arg"
;;
*.lo)
# A libtool-controlled object.
# Check to see that this really is a libtool object.
if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
pic_object=
non_pic_object=
# Read the .lo file
# If there is no directory component, then add one.
case $arg in
*/* | *\\*) . $arg ;;
*) . ./$arg ;;
esac
if test -z "$pic_object" || \
test -z "$non_pic_object" ||
test "$pic_object" = none && \
test "$non_pic_object" = none; then
$echo "$modename: cannot find name of object for \`$arg'" 1>&2
exit $EXIT_FAILURE
fi
# Extract subdirectory from the argument.
xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
if test "X$xdir" = "X$arg"; then
xdir=
else
xdir="$xdir/"
fi
if test "$pic_object" != none; then
# Prepend the subdirectory the object is found in.
pic_object="$xdir$pic_object"
if test "$prev" = dlfiles; then
if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
dlfiles="$dlfiles $pic_object"
prev=
continue
else
# If libtool objects are unsupported, then we need to preload.
prev=dlprefiles
fi
fi
# CHECK ME: I think I busted this. -Ossama
if test "$prev" = dlprefiles; then
# Preload the old-style object.
dlprefiles="$dlprefiles $pic_object"
prev=
fi
# A PIC object.
libobjs="$libobjs $pic_object"
arg="$pic_object"
fi
# Non-PIC object.
if test "$non_pic_object" != none; then
# Prepend the subdirectory the object is found in.
non_pic_object="$xdir$non_pic_object"
# A standard non-PIC object
non_pic_objects="$non_pic_objects $non_pic_object"
if test -z "$pic_object" || test "$pic_object" = none ; then
arg="$non_pic_object"
fi
else
# If the PIC object exists, use it instead.
# $xdir was prepended to $pic_object above.
non_pic_object="$pic_object"
non_pic_objects="$non_pic_objects $non_pic_object"
fi
else
# Only an error if not doing a dry-run.
if test -z "$run"; then
$echo "$modename: \`$arg' is not a valid libtool object" 1>&2
exit $EXIT_FAILURE
else
# Dry-run case.
# Extract subdirectory from the argument.
xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
if test "X$xdir" = "X$arg"; then
xdir=
else
xdir="$xdir/"
fi
pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
libobjs="$libobjs $pic_object"
non_pic_objects="$non_pic_objects $non_pic_object"
fi
fi
;;
*.$libext)
# An archive.
deplibs="$deplibs $arg"
old_deplibs="$old_deplibs $arg"
continue
;;
*.la)
# A libtool-controlled library.
if test "$prev" = dlfiles; then
# This library was specified with -dlopen.
dlfiles="$dlfiles $arg"
prev=
elif test "$prev" = dlprefiles; then
# The library was specified with -dlpreopen.
dlprefiles="$dlprefiles $arg"
prev=
else
deplibs="$deplibs $arg"
fi
continue
;;
# Some other compiler argument.
*)
# Unknown arguments in both finalize_command and compile_command need
# to be aesthetically quoted because they are evaled later.
arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
case $arg in
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
arg="\"$arg\""
;;
esac
;;
esac # arg
# Now actually substitute the argument into the commands.
if test -n "$arg"; then
compile_command="$compile_command $arg"
finalize_command="$finalize_command $arg"
fi
done # argument parsing loop
if test -n "$prev"; then
$echo "$modename: the \`$prevarg' option requires an argument" 1>&2
$echo "$help" 1>&2
exit $EXIT_FAILURE
fi
if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
eval arg=\"$export_dynamic_flag_spec\"
compile_command="$compile_command $arg"
finalize_command="$finalize_command $arg"
fi
oldlibs=
# calculate the name of the file, without its directory
outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
libobjs_save="$libobjs"
if test -n "$shlibpath_var"; then
# get the directories listed in $shlibpath_var
eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
else
shlib_search_path=
fi
eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
if test "X$output_objdir" = "X$output"; then
output_objdir="$objdir"
else
output_objdir="$output_objdir/$objdir"
fi
# Create the object directory.
if test ! -d "$output_objdir"; then
$show "$mkdir $output_objdir"
$run $mkdir $output_objdir
exit_status=$?
if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then
exit $exit_status
fi
fi
# Determine the type of output
case $output in
"")
$echo "$modename: you must specify an output file" 1>&2
$echo "$help" 1>&2
exit $EXIT_FAILURE
;;
*.$libext) linkmode=oldlib ;;
*.lo | *.$objext) linkmode=obj ;;
*.la) linkmode=lib ;;
*) linkmode=prog ;; # Anything else should be a program.
esac
case $host in
*cygwin* | *mingw* | *pw32*)
# don't eliminate duplications in $postdeps and $predeps
duplicate_compiler_generated_deps=yes
;;
*)
duplicate_compiler_generated_deps=$duplicate_deps
;;
esac
specialdeplibs=
libs=
# Find all interdependent deplibs by searching for libraries
# that are linked more than once (e.g. -la -lb -la)
for deplib in $deplibs; do
if test "X$duplicate_deps" = "Xyes" ; then
case "$libs " in
*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
esac
fi
libs="$libs $deplib"
done
if test "$linkmode" = lib; then
libs="$predeps $libs $compiler_lib_search_path $postdeps"
# Compute libraries that are listed more than once in $predeps
# $postdeps and mark them as special (i.e., whose duplicates are
# not to be eliminated).
pre_post_deps=
if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then
for pre_post_dep in $predeps $postdeps; do
case "$pre_post_deps " in
*" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
esac
pre_post_deps="$pre_post_deps $pre_post_dep"
done
fi
pre_post_deps=
fi
deplibs=
newdependency_libs=
newlib_search_path=
need_relink=no # whether we're linking any uninstalled libtool libraries
notinst_deplibs= # not-installed libtool libraries
case $linkmode in
lib)
passes="conv link"
for file in $dlfiles $dlprefiles; do
case $file in
*.la) ;;
*)
$echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
exit $EXIT_FAILURE
;;
esac
done
;;
prog)
compile_deplibs=
finalize_deplibs=
alldeplibs=no
newdlfiles=
newdlprefiles=
passes="conv scan dlopen dlpreopen link"
;;
*) passes="conv"
;;
esac
for pass in $passes; do
if test "$linkmode,$pass" = "lib,link" ||
test "$linkmode,$pass" = "prog,scan"; then
libs="$deplibs"
deplibs=
fi
if test "$linkmode" = prog; then
case $pass in
dlopen) libs="$dlfiles" ;;
dlpreopen) libs="$dlprefiles" ;;
link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
esac
fi
if test "$pass" = dlopen; then
# Collect dlpreopened libraries
save_deplibs="$deplibs"
deplibs=
fi
for deplib in $libs; do
lib=
found=no
case $deplib in
-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
if test "$linkmode,$pass" = "prog,link"; then
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
else
compiler_flags="$compiler_flags $deplib"
fi
continue
;;
-l*)
if test "$linkmode" != lib && test "$linkmode" != prog; then
$echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2
continue
fi
name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
for search_ext in .la $std_shrext .so .a; do
# Search the libtool library
lib="$searchdir/lib${name}${search_ext}"
if test -f "$lib"; then
if test "$search_ext" = ".la"; then
found=yes
else
found=no
fi
break 2
fi
done
done
if test "$found" != yes; then
# deplib doesn't seem to be a libtool library
if test "$linkmode,$pass" = "prog,link"; then
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
else
deplibs="$deplib $deplibs"
test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
fi
continue
else # deplib is a libtool library
# If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
# We need to do some special things here, and not later.
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
case " $predeps $postdeps " in
*" $deplib "*)
if (${SED} -e '2q' $lib |
grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
library_names=
old_library=
case $lib in
*/* | *\\*) . $lib ;;
*) . ./$lib ;;
esac
for l in $old_library $library_names; do
ll="$l"
done
if test "X$ll" = "X$old_library" ; then # only static version available
found=no
ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
test "X$ladir" = "X$lib" && ladir="."
lib=$ladir/$old_library
if test "$linkmode,$pass" = "prog,link"; then
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
else
deplibs="$deplib $deplibs"
test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
fi
continue
fi
fi
;;
*) ;;
esac
fi
fi
;; # -l
-L*)
case $linkmode in
lib)
deplibs="$deplib $deplibs"
test "$pass" = conv && continue
newdependency_libs="$deplib $newdependency_libs"
newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
;;
prog)
if test "$pass" = conv; then
deplibs="$deplib $deplibs"
continue
fi
if test "$pass" = scan; then
deplibs="$deplib $deplibs"
else
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
fi
newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
;;
*)
$echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2
;;
esac # linkmode
continue
;; # -L
-R*)
if test "$pass" = link; then
dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
# Make sure the xrpath contains only unique directories.
case "$xrpath " in
*" $dir "*) ;;
*) xrpath="$xrpath $dir" ;;
esac
fi
deplibs="$deplib $deplibs"
continue
;;
*.la) lib="$deplib" ;;
*.$libext)
if test "$pass" = conv; then
deplibs="$deplib $deplibs"
continue
fi
case $linkmode in
lib)
valid_a_lib=no
case $deplibs_check_method in
match_pattern*)
set dummy $deplibs_check_method
match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
if eval $echo \"$deplib\" 2>/dev/null \
| $SED 10q \
| $EGREP "$match_pattern_regex" > /dev/null; then
valid_a_lib=yes
fi
;;
pass_all)
valid_a_lib=yes
;;
esac
if test "$valid_a_lib" != yes; then
$echo
$echo "*** Warning: Trying to link with static lib archive $deplib."
$echo "*** I have the capability to make that library automatically link in when"
$echo "*** you link to this library. But I can only do this if you have a"
$echo "*** shared version of the library, which you do not appear to have"
$echo "*** because the file extensions .$libext of this argument makes me believe"
$echo "*** that it is just a static archive that I should not used here."
else
$echo
$echo "*** Warning: Linking the shared library $output against the"
$echo "*** static library $deplib is not portable!"
deplibs="$deplib $deplibs"
fi
continue
;;
prog)
if test "$pass" != link; then
deplibs="$deplib $deplibs"
else
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
fi
continue
;;
esac # linkmode
;; # *.$libext
*.lo | *.$objext)
if test "$pass" = conv; then
deplibs="$deplib $deplibs"
elif test "$linkmode" = prog; then
if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
# If there is no dlopen support or we're linking statically,
# we need to preload.
newdlprefiles="$newdlprefiles $deplib"
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
else
newdlfiles="$newdlfiles $deplib"
fi
fi
continue
;;
%DEPLIBS%)
alldeplibs=yes
continue
;;
esac # case $deplib
if test "$found" = yes || test -f "$lib"; then :
else
$echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2
exit $EXIT_FAILURE
fi
# Check to see that this really is a libtool archive.
if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
else
$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
exit $EXIT_FAILURE
fi
ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
test "X$ladir" = "X$lib" && ladir="."
dlname=
dlopen=
dlpreopen=
libdir=
library_names=
old_library=
# If the library was installed with an old release of libtool,
# it will not redefine variables installed, or shouldnotlink
installed=yes
shouldnotlink=no
avoidtemprpath=
# Read the .la file
case $lib in
*/* | *\\*) . $lib ;;
*) . ./$lib ;;
esac
if test "$linkmode,$pass" = "lib,link" ||
test "$linkmode,$pass" = "prog,scan" ||
{ test "$linkmode" != prog && test "$linkmode" != lib; }; then
test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
fi
if test "$pass" = conv; then
# Only check for convenience libraries
deplibs="$lib $deplibs"
if test -z "$libdir"; then
if test -z "$old_library"; then
$echo "$modename: cannot find name of link library for \`$lib'" 1>&2
exit $EXIT_FAILURE
fi
# It is a libtool convenience library, so add in its objects.
convenience="$convenience $ladir/$objdir/$old_library"
old_convenience="$old_convenience $ladir/$objdir/$old_library"
tmp_libs=
for deplib in $dependency_libs; do
deplibs="$deplib $deplibs"
if test "X$duplicate_deps" = "Xyes" ; then
case "$tmp_libs " in
*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
esac
fi
tmp_libs="$tmp_libs $deplib"
done
elif test "$linkmode" != prog && test "$linkmode" != lib; then
$echo "$modename: \`$lib' is not a convenience library" 1>&2
exit $EXIT_FAILURE
fi
continue
fi # $pass = conv
# Get the name of the library we link against.
linklib=
for l in $old_library $library_names; do
linklib="$l"
done
if test -z "$linklib"; then
$echo "$modename: cannot find name of link library for \`$lib'" 1>&2
exit $EXIT_FAILURE
fi
# This library was specified with -dlopen.
if test "$pass" = dlopen; then
if test -z "$libdir"; then
$echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
exit $EXIT_FAILURE
fi
if test -z "$dlname" ||
test "$dlopen_support" != yes ||
test "$build_libtool_libs" = no; then
# If there is no dlname, no dlopen support or we're linking
# statically, we need to preload. We also need to preload any
# dependent libraries so libltdl's deplib preloader doesn't
# bomb out in the load deplibs phase.
dlprefiles="$dlprefiles $lib $dependency_libs"
else
newdlfiles="$newdlfiles $lib"
fi
continue
fi # $pass = dlopen
# We need an absolute path.
case $ladir in
[\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
*)
abs_ladir=`cd "$ladir" && pwd`
if test -z "$abs_ladir"; then
$echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2
$echo "$modename: passing it literally to the linker, although it might fail" 1>&2
abs_ladir="$ladir"
fi
;;
esac
laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
# Find the relevant object directory and library name.
if test "X$installed" = Xyes; then
if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
$echo "$modename: warning: library \`$lib' was moved." 1>&2
dir="$ladir"
absdir="$abs_ladir"
libdir="$abs_ladir"
else
dir="$libdir"
absdir="$libdir"
fi
test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
else
if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
dir="$ladir"
absdir="$abs_ladir"
# Remove this search path later
notinst_path="$notinst_path $abs_ladir"
else
dir="$ladir/$objdir"
absdir="$abs_ladir/$objdir"
# Remove this search path later
notinst_path="$notinst_path $abs_ladir"
fi
fi # $installed = yes
name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
# This library was specified with -dlpreopen.
if test "$pass" = dlpreopen; then
if test -z "$libdir"; then
$echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
exit $EXIT_FAILURE
fi
# Prefer using a static library (so that no silly _DYNAMIC symbols
# are required to link).
if test -n "$old_library"; then
newdlprefiles="$newdlprefiles $dir/$old_library"
# Otherwise, use the dlname, so that lt_dlopen finds it.
elif test -n "$dlname"; then
newdlprefiles="$newdlprefiles $dir/$dlname"
else
newdlprefiles="$newdlprefiles $dir/$linklib"
fi
fi # $pass = dlpreopen
if test -z "$libdir"; then
# Link the convenience library
if test "$linkmode" = lib; then
deplibs="$dir/$old_library $deplibs"
elif test "$linkmode,$pass" = "prog,link"; then
compile_deplibs="$dir/$old_library $compile_deplibs"
finalize_deplibs="$dir/$old_library $finalize_deplibs"
else
deplibs="$lib $deplibs" # used for prog,scan pass
fi
continue
fi
if test "$linkmode" = prog && test "$pass" != link; then
newlib_search_path="$newlib_search_path $ladir"
deplibs="$lib $deplibs"
linkalldeplibs=no
if test "$link_all_deplibs" != no || test -z "$library_names" ||
test "$build_libtool_libs" = no; then
linkalldeplibs=yes
fi
tmp_libs=
for deplib in $dependency_libs; do
case $deplib in
-L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
esac
# Need to link against all dependency_libs?
if test "$linkalldeplibs" = yes; then
deplibs="$deplib $deplibs"
else
# Need to hardcode shared library paths
# or/and link against static libraries
newdependency_libs="$deplib $newdependency_libs"
fi
if test "X$duplicate_deps" = "Xyes" ; then
case "$tmp_libs " in
*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
esac
fi
tmp_libs="$tmp_libs $deplib"
done # for deplib
continue
fi # $linkmode = prog...
if test "$linkmode,$pass" = "prog,link"; then
if test -n "$library_names" &&
{ { test "$prefer_static_libs" = no ||
test "$prefer_static_libs,$installed" = "built,yes"; } ||
test -z "$old_library"; }; then
# We need to hardcode the library path
if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
# Make sure the rpath contains only unique directories.
case "$temp_rpath " in
*" $dir "*) ;;
*" $absdir "*) ;;
*) temp_rpath="$temp_rpath $absdir" ;;
esac
fi
# Hardcode the library path.
# Skip directories that are in the system default run-time
# search path.
case " $sys_lib_dlsearch_path " in
*" $absdir "*) ;;
*)
case "$compile_rpath " in
*" $absdir "*) ;;
*) compile_rpath="$compile_rpath $absdir"
esac
;;
esac
case " $sys_lib_dlsearch_path " in
*" $libdir "*) ;;
*)
case "$finalize_rpath " in
*" $libdir "*) ;;
*) finalize_rpath="$finalize_rpath $libdir"
esac
;;
esac
fi # $linkmode,$pass = prog,link...
if test "$alldeplibs" = yes &&
{ test "$deplibs_check_method" = pass_all ||
{ test "$build_libtool_libs" = yes &&
test -n "$library_names"; }; }; then
# We only need to search for static libraries
continue
fi
fi
link_static=no # Whether the deplib will be linked statically
use_static_libs=$prefer_static_libs
if test "$use_static_libs" = built && test "$installed" = yes ; then
use_static_libs=no
fi
if test -n "$library_names" &&
{ test "$use_static_libs" = no || test -z "$old_library"; }; then
if test "$installed" = no; then
notinst_deplibs="$notinst_deplibs $lib"
need_relink=yes
fi
# This is a shared library
# Warn about portability, can't link against -module's on
# some systems (darwin)
if test "$shouldnotlink" = yes && test "$pass" = link ; then
$echo
if test "$linkmode" = prog; then
$echo "*** Warning: Linking the executable $output against the loadable module"
else
$echo "*** Warning: Linking the shared library $output against the loadable module"
fi
$echo "*** $linklib is not portable!"
fi
if test "$linkmode" = lib &&
test "$hardcode_into_libs" = yes; then
# Hardcode the library path.
# Skip directories that are in the system default run-time
# search path.
case " $sys_lib_dlsearch_path " in
*" $absdir "*) ;;
*)
case "$compile_rpath " in
*" $absdir "*) ;;
*) compile_rpath="$compile_rpath $absdir"
esac
;;
esac
case " $sys_lib_dlsearch_path " in
*" $libdir "*) ;;
*)
case "$finalize_rpath " in
*" $libdir "*) ;;
*) finalize_rpath="$finalize_rpath $libdir"
esac
;;
esac
fi
if test -n "$old_archive_from_expsyms_cmds"; then
# figure out the soname
set dummy $library_names
realname="$2"
shift; shift
libname=`eval \\$echo \"$libname_spec\"`
# use dlname if we got it. it's perfectly good, no?
if test -n "$dlname"; then
soname="$dlname"
elif test -n "$soname_spec"; then
# bleh windows
case $host in
*cygwin* | mingw*)
major=`expr $current - $age`
versuffix="-$major"
;;
esac
eval soname=\"$soname_spec\"
else
soname="$realname"
fi
# Make a new name for the extract_expsyms_cmds to use
soroot="$soname"
soname=`$echo $soroot | ${SED} -e 's/^.*\///'`
newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a"
# If the library has no export list, then create one now
if test -f "$output_objdir/$soname-def"; then :
else
$show "extracting exported symbol list from \`$soname'"
save_ifs="$IFS"; IFS='~'
cmds=$extract_expsyms_cmds
for cmd in $cmds; do
IFS="$save_ifs"
eval cmd=\"$cmd\"
$show "$cmd"
$run eval "$cmd" || exit $?
done
IFS="$save_ifs"
fi
# Create $newlib
if test -f "$output_objdir/$newlib"; then :; else
$show "generating import library for \`$soname'"
save_ifs="$IFS"; IFS='~'
cmds=$old_archive_from_expsyms_cmds
for cmd in $cmds; do
IFS="$save_ifs"
eval cmd=\"$cmd\"
$show "$cmd"
$run eval "$cmd" || exit $?
done
IFS="$save_ifs"
fi
# make sure the library variables are pointing to the new library
dir=$output_objdir
linklib=$newlib
fi # test -n "$old_archive_from_expsyms_cmds"
if test "$linkmode" = prog || test "$mode" != relink; then
add_shlibpath=
add_dir=
add=
lib_linked=yes
case $hardcode_action in
immediate | unsupported)
if test "$hardcode_direct" = no; then
add="$dir/$linklib"
case $host in
*-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
*-*-sysv4*uw2*) add_dir="-L$dir" ;;
*-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
*-*-unixware7*) add_dir="-L$dir" ;;
*-*-darwin* )
# if the lib is a module then we can not link against
# it, someone is ignoring the new warnings I added
if /usr/bin/file -L $add 2> /dev/null |
$EGREP ": [^:]* bundle" >/dev/null ; then
$echo "** Warning, lib $linklib is a module, not a shared library"
if test -z "$old_library" ; then
$echo
$echo "** And there doesn't seem to be a static archive available"
$echo "** The link will probably fail, sorry"
else
add="$dir/$old_library"
fi
fi
esac
elif test "$hardcode_minus_L" = no; then
case $host in
*-*-sunos*) add_shlibpath="$dir" ;;
esac
add_dir="-L$dir"
add="-l$name"
elif test "$hardcode_shlibpath_var" = no; then
add_shlibpath="$dir"
add="-l$name"
else
lib_linked=no
fi
;;
relink)
if test "$hardcode_direct" = yes; then
add="$dir/$linklib"
elif test "$hardcode_minus_L" = yes; then
add_dir="-L$dir"
# Try looking first in the location we're being installed to.
if test -n "$inst_prefix_dir"; then
case $libdir in
[\\/]*)
add_dir="$add_dir -L$inst_prefix_dir$libdir"
;;
esac
fi
add="-l$name"
elif test "$hardcode_shlibpath_var" = yes; then
add_shlibpath="$dir"
add="-l$name"
else
lib_linked=no
fi
;;
*) lib_linked=no ;;
esac
if test "$lib_linked" != yes; then
$echo "$modename: configuration error: unsupported hardcode properties"
exit $EXIT_FAILURE
fi
if test -n "$add_shlibpath"; then
case :$compile_shlibpath: in
*":$add_shlibpath:"*) ;;
*) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
esac
fi
if test "$linkmode" = prog; then
test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
test -n "$add" && compile_deplibs="$add $compile_deplibs"
else
test -n "$add_dir" && deplibs="$add_dir $deplibs"
test -n "$add" && deplibs="$add $deplibs"
if test "$hardcode_direct" != yes && \
test "$hardcode_minus_L" != yes && \
test "$hardcode_shlibpath_var" = yes; then
case :$finalize_shlibpath: in
*":$libdir:"*) ;;
*) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
esac
fi
fi
fi
if test "$linkmode" = prog || test "$mode" = relink; then
add_shlibpath=
add_dir=
add=
# Finalize command for both is simple: just hardcode it.
if test "$hardcode_direct" = yes; then
add="$libdir/$linklib"
elif test "$hardcode_minus_L" = yes; then
add_dir="-L$libdir"
add="-l$name"
elif test "$hardcode_shlibpath_var" = yes; then
case :$finalize_shlibpath: in
*":$libdir:"*) ;;
*) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
esac
add="-l$name"
elif test "$hardcode_automatic" = yes; then
if test -n "$inst_prefix_dir" &&
test -f "$inst_prefix_dir$libdir/$linklib" ; then
add="$inst_prefix_dir$libdir/$linklib"
else
add="$libdir/$linklib"
fi
else
# We cannot seem to hardcode it, guess we'll fake it.
add_dir="-L$libdir"
# Try looking first in the location we're being installed to.
if test -n "$inst_prefix_dir"; then
case $libdir in
[\\/]*)
add_dir="$add_dir -L$inst_prefix_dir$libdir"
;;
esac
fi
add="-l$name"
fi
if test "$linkmode" = prog; then
test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
else
test -n "$add_dir" && deplibs="$add_dir $deplibs"
test -n "$add" && deplibs="$add $deplibs"
fi
fi
elif test "$linkmode" = prog; then
# Here we assume that one of hardcode_direct or hardcode_minus_L
# is not unsupported. This is valid on all known static and
# shared platforms.
if test "$hardcode_direct" != unsupported; then
test -n "$old_library" && linklib="$old_library"
compile_deplibs="$dir/$linklib $compile_deplibs"
finalize_deplibs="$dir/$linklib $finalize_deplibs"
else
compile_deplibs="-l$name -L$dir $compile_deplibs"
finalize_deplibs="-l$name -L$dir $finalize_deplibs"
fi
elif test "$build_libtool_libs" = yes; then
# Not a shared library
if test "$deplibs_check_method" != pass_all; then
# We're trying link a shared library against a static one
# but the system doesn't support it.
# Just print a warning and add the library to dependency_libs so
# that the program can be linked against the static library.
$echo
$echo "*** Warning: This system can not link to static lib archive $lib."
$echo "*** I have the capability to make that library automatically link in when"
$echo "*** you link to this library. But I can only do this if you have a"
$echo "*** shared version of the library, which you do not appear to have."
if test "$module" = yes; then
$echo "*** But as you try to build a module library, libtool will still create "
$echo "*** a static module, that should work as long as the dlopening application"
$echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
if test -z "$global_symbol_pipe"; then
$echo
$echo "*** However, this would only work if libtool was able to extract symbol"
$echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
$echo "*** not find such a program. So, this module is probably useless."
$echo "*** \`nm' from GNU binutils and a full rebuild may help."
fi
if test "$build_old_libs" = no; then
build_libtool_libs=module
build_old_libs=yes
else
build_libtool_libs=no
fi
fi
else
deplibs="$dir/$old_library $deplibs"
link_static=yes
fi
fi # link shared/static library?
if test "$linkmode" = lib; then
if test -n "$dependency_libs" &&
{ test "$hardcode_into_libs" != yes ||
test "$build_old_libs" = yes ||
test "$link_static" = yes; }; then
# Extract -R from dependency_libs
temp_deplibs=
for libdir in $dependency_libs; do
case $libdir in
-R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'`
case " $xrpath " in
*" $temp_xrpath "*) ;;
*) xrpath="$xrpath $temp_xrpath";;
esac;;
*) temp_deplibs="$temp_deplibs $libdir";;
esac
done
dependency_libs="$temp_deplibs"
fi
newlib_search_path="$newlib_search_path $absdir"
# Link against this library
test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
# ... and its dependency_libs
tmp_libs=
for deplib in $dependency_libs; do
newdependency_libs="$deplib $newdependency_libs"
if test "X$duplicate_deps" = "Xyes" ; then
case "$tmp_libs " in
*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
esac
fi
tmp_libs="$tmp_libs $deplib"
done
if test "$link_all_deplibs" != no; then
# Add the search paths of all dependency libraries
for deplib in $dependency_libs; do
case $deplib in
-L*) path="$deplib" ;;
*.la)
dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'`
test "X$dir" = "X$deplib" && dir="."
# We need an absolute path.
case $dir in
[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
*)
absdir=`cd "$dir" && pwd`
if test -z "$absdir"; then
$echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
absdir="$dir"
fi
;;
esac
if grep "^installed=no" $deplib > /dev/null; then
path="$absdir/$objdir"
else
eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
if test -z "$libdir"; then
$echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
exit $EXIT_FAILURE
fi
if test "$absdir" != "$libdir"; then
$echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
fi
path="$absdir"
fi
depdepl=
case $host in
*-*-darwin*)
# we do not want to link against static libs,
# but need to link against shared
eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
if test -n "$deplibrary_names" ; then
for tmp in $deplibrary_names ; do
depdepl=$tmp
done
if test -f "$path/$depdepl" ; then
depdepl="$path/$depdepl"
fi
# do not add paths which are already there
case " $newlib_search_path " in
*" $path "*) ;;
*) newlib_search_path="$newlib_search_path $path";;
esac
fi
path=""
;;
*)
path="-L$path"
;;
esac
;;
-l*)
case $host in
*-*-darwin*)
# Again, we only want to link against shared libraries
eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"`
for tmp in $newlib_search_path ; do
if test -f "$tmp/lib$tmp_libs.dylib" ; then
eval depdepl="$tmp/lib$tmp_libs.dylib"
break
fi
done
path=""
;;
*) continue ;;
esac
;;
*) continue ;;
esac
case " $deplibs " in
*" $path "*) ;;
*) deplibs="$path $deplibs" ;;
esac
case " $deplibs " in
*" $depdepl "*) ;;
*) deplibs="$depdepl $deplibs" ;;
esac
done
fi # link_all_deplibs != no
fi # linkmode = lib
done # for deplib in $libs
dependency_libs="$newdependency_libs"
if test "$pass" = dlpreopen; then
# Link the dlpreopened libraries before other libraries
for deplib in $save_deplibs; do
deplibs="$deplib $deplibs"
done
fi
if test "$pass" != dlopen; then
if test "$pass" != conv; then
# Make sure lib_search_path contains only unique directories.
lib_search_path=
for dir in $newlib_search_path; do
case "$lib_search_path " in
*" $dir "*) ;;
*) lib_search_path="$lib_search_path $dir" ;;
esac
done
newlib_search_path=
fi
if test "$linkmode,$pass" != "prog,link"; then
vars="deplibs"
else
vars="compile_deplibs finalize_deplibs"
fi
for var in $vars dependency_libs; do
# Add libraries to $var in reverse order
eval tmp_libs=\"\$$var\"
new_libs=
for deplib in $tmp_libs; do
# FIXME: Pedantically, this is the right thing to do, so
# that some nasty dependency loop isn't accidentally
# broken:
#new_libs="$deplib $new_libs"
# Pragmatically, this seems to cause very few problems in
# practice:
case $deplib in
-L*) new_libs="$deplib $new_libs" ;;
-R*) ;;
*)
# And here is the reason: when a library appears more
# than once as an explicit dependence of a library, or
# is implicitly linked in more than once by the
# compiler, it is considered special, and multiple
# occurrences thereof are not removed. Compare this
# with having the same library being listed as a
# dependency of multiple other libraries: in this case,
# we know (pedantically, we assume) the library does not
# need to be listed more than once, so we keep only the
# last copy. This is not always right, but it is rare
# enough that we require users that really mean to play
# such unportable linking tricks to link the library
# using -Wl,-lname, so that libtool does not consider it
# for duplicate removal.
case " $specialdeplibs " in
*" $deplib "*) new_libs="$deplib $new_libs" ;;
*)
case " $new_libs " in
*" $deplib "*) ;;
*) new_libs="$deplib $new_libs" ;;
esac
;;
esac
;;
esac
done
tmp_libs=
for deplib in $new_libs; do
case $deplib in
-L*)
case " $tmp_libs " in
*" $deplib "*) ;;
*) tmp_libs="$tmp_libs $deplib" ;;
esac
;;
*) tmp_libs="$tmp_libs $deplib" ;;
esac
done
eval $var=\"$tmp_libs\"
done # for var
fi
# Last step: remove runtime libs from dependency_libs
# (they stay in deplibs)
tmp_libs=
for i in $dependency_libs ; do
case " $predeps $postdeps $compiler_lib_search_path " in
*" $i "*)
i=""
;;
esac
if test -n "$i" ; then
tmp_libs="$tmp_libs $i"
fi
done
dependency_libs=$tmp_libs
done # for pass
if test "$linkmode" = prog; then
dlfiles="$newdlfiles"
dlprefiles="$newdlprefiles"
fi
case $linkmode in
oldlib)
if test -n "$deplibs"; then
$echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
fi
if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
$echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
fi
if test -n "$rpath"; then
$echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
fi
if test -n "$xrpath"; then
$echo "$modename: warning: \`-R' is ignored for archives" 1>&2
fi
if test -n "$vinfo"; then
$echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2
fi
if test -n "$release"; then
$echo "$modename: warning: \`-release' is ignored for archives" 1>&2
fi
if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
$echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
fi
# Now set the variables for building old libraries.
build_libtool_libs=no
oldlibs="$output"
objs="$objs$old_deplibs"
;;
lib)
# Make sure we only generate libraries of the form `libNAME.la'.
case $outputname in
lib*)
name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
eval shared_ext=\"$shrext_cmds\"
eval libname=\"$libname_spec\"
;;
*)
if test "$module" = no; then
$echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
$echo "$help" 1>&2
exit $EXIT_FAILURE
fi
if test "$need_lib_prefix" != no; then
# Add the "lib" prefix for modules if required
name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
eval shared_ext=\"$shrext_cmds\"
eval libname=\"$libname_spec\"
else
libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
fi
;;
esac
if test -n "$objs"; then
if test "$deplibs_check_method" != pass_all; then
$echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
exit $EXIT_FAILURE
else
$echo
$echo "*** Warning: Linking the shared library $output against the non-libtool"
$echo "*** objects $objs is not portable!"
libobjs="$libobjs $objs"
fi
fi
if test "$dlself" != no; then
$echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2
fi
set dummy $rpath
if test "$#" -gt 2; then
$echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
fi
install_libdir="$2"
oldlibs=
if test -z "$rpath"; then
if test "$build_libtool_libs" = yes; then
# Building a libtool convenience library.
# Some compilers have problems with a `.al' extension so
# convenience libraries should have the same extension an
# archive normally would.
oldlibs="$output_objdir/$libname.$libext $oldlibs"
build_libtool_libs=convenience
build_old_libs=yes
fi
if test -n "$vinfo"; then
$echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2
fi
if test -n "$release"; then
$echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
fi
else
# Parse the version information argument.
save_ifs="$IFS"; IFS=':'
set dummy $vinfo 0 0 0
IFS="$save_ifs"
if test -n "$8"; then
$echo "$modename: too many parameters to \`-version-info'" 1>&2
$echo "$help" 1>&2
exit $EXIT_FAILURE
fi
# convert absolute version numbers to libtool ages
# this retains compatibility with .la files and attempts
# to make the code below a bit more comprehensible
case $vinfo_number in
yes)
number_major="$2"
number_minor="$3"
number_revision="$4"
#
# There are really only two kinds -- those that
# use the current revision as the major version
# and those that subtract age and use age as
# a minor version. But, then there is irix
# which has an extra 1 added just for fun
#
case $version_type in
darwin|linux|osf|windows|none)
current=`expr $number_major + $number_minor`
age="$number_minor"
revision="$number_revision"
;;
freebsd-aout|freebsd-elf|sunos)
current="$number_major"
revision="$number_minor"
age="0"
;;
irix|nonstopux)
current=`expr $number_major + $number_minor`
age="$number_minor"
revision="$number_minor"
lt_irix_increment=no
;;
esac
;;
no)
current="$2"
revision="$3"
age="$4"
;;
esac
# Check that each of the things are valid numbers.
case $current in
0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
*)
$echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2
$echo "$modename: \`$vinfo' is not valid version information" 1>&2
exit $EXIT_FAILURE
;;
esac
case $revision in
0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
*)
$echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2
$echo "$modename: \`$vinfo' is not valid version information" 1>&2
exit $EXIT_FAILURE
;;
esac
case $age in
0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
*)
$echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2
$echo "$modename: \`$vinfo' is not valid version information" 1>&2
exit $EXIT_FAILURE
;;
esac
if test "$age" -gt "$current"; then
$echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
$echo "$modename: \`$vinfo' is not valid version information" 1>&2
exit $EXIT_FAILURE
fi
# Calculate the version variables.
major=
versuffix=
verstring=
case $version_type in
none) ;;
darwin)
# Like Linux, but with the current version available in
# verstring for coding it into the library header
major=.`expr $current - $age`
versuffix="$major.$age.$revision"
# Darwin ld doesn't like 0 for these options...
minor_current=`expr $current + 1`
xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
;;
freebsd-aout)
major=".$current"
versuffix=".$current.$revision";
;;
freebsd-elf)
major=".$current"
versuffix=".$current";
;;
irix | nonstopux)
if test "X$lt_irix_increment" = "Xno"; then
major=`expr $current - $age`
else
major=`expr $current - $age + 1`
fi
case $version_type in
nonstopux) verstring_prefix=nonstopux ;;
*) verstring_prefix=sgi ;;
esac
verstring="$verstring_prefix$major.$revision"
# Add in all the interfaces that we are compatible with.
loop=$revision
while test "$loop" -ne 0; do
iface=`expr $revision - $loop`
loop=`expr $loop - 1`
verstring="$verstring_prefix$major.$iface:$verstring"
done
# Before this point, $major must not contain `.'.
major=.$major
versuffix="$major.$revision"
;;
linux)
major=.`expr $current - $age`
versuffix="$major.$age.$revision"
;;
osf)
major=.`expr $current - $age`
versuffix=".$current.$age.$revision"
verstring="$current.$age.$revision"
# Add in all the interfaces that we are compatible with.
loop=$age
while test "$loop" -ne 0; do
iface=`expr $current - $loop`
loop=`expr $loop - 1`
verstring="$verstring:${iface}.0"
done
# Make executables depend on our current version.
verstring="$verstring:${current}.0"
;;
sunos)
major=".$current"
versuffix=".$current.$revision"
;;
windows)
# Use '-' rather than '.', since we only want one
# extension on DOS 8.3 filesystems.
major=`expr $current - $age`
versuffix="-$major"
;;
*)
$echo "$modename: unknown library version type \`$version_type'" 1>&2
$echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
exit $EXIT_FAILURE
;;
esac
# Clear the version info if we defaulted, and they specified a release.
if test -z "$vinfo" && test -n "$release"; then
major=
case $version_type in
darwin)
# we can't check for "0.0" in archive_cmds due to quoting
# problems, so we reset it completely
verstring=
;;
*)
verstring="0.0"
;;
esac
if test "$need_version" = no; then
versuffix=
else
versuffix=".0.0"
fi
fi
# Remove version info from name if versioning should be avoided
if test "$avoid_version" = yes && test "$need_version" = no; then
major=
versuffix=
verstring=""
fi
# Check to see if the archive will have undefined symbols.
if test "$allow_undefined" = yes; then
if test "$allow_undefined_flag" = unsupported; then
$echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
build_libtool_libs=no
build_old_libs=yes
fi
else
# Don't allow undefined symbols.
allow_undefined_flag="$no_undefined_flag"
fi
fi
if test "$mode" != relink; then
# Remove our outputs, but don't remove object files since they
# may have been created when compiling PIC objects.
removelist=
tempremovelist=`$echo "$output_objdir/*"`
for p in $tempremovelist; do
case $p in
*.$objext)
;;
$output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
if test "X$precious_files_regex" != "X"; then
if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
then
continue
fi
fi
removelist="$removelist $p"
;;
*) ;;
esac
done
if test -n "$removelist"; then
$show "${rm}r $removelist"
$run ${rm}r $removelist
fi
fi
# Now set the variables for building old libraries.
if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
oldlibs="$oldlibs $output_objdir/$libname.$libext"
# Transform .lo files to .o files.
oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
fi
# Eliminate all temporary directories.
#for path in $notinst_path; do
# lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`
# deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
# dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"`
#done
if test -n "$xrpath"; then
# If the user specified any rpath flags, then add them.
temp_xrpath=
for libdir in $xrpath; do
temp_xrpath="$temp_xrpath -R$libdir"
case "$finalize_rpath " in
*" $libdir "*) ;;
*) finalize_rpath="$finalize_rpath $libdir" ;;
esac
done
if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
dependency_libs="$temp_xrpath $dependency_libs"
fi
fi
# Make sure dlfiles contains only unique files that won't be dlpreopened
old_dlfiles="$dlfiles"
dlfiles=
for lib in $old_dlfiles; do
case " $dlprefiles $dlfiles " in
*" $lib "*) ;;
*) dlfiles="$dlfiles $lib" ;;
esac
done
# Make sure dlprefiles contains only unique files
old_dlprefiles="$dlprefiles"
dlprefiles=
for lib in $old_dlprefiles; do
case "$dlprefiles " in
*" $lib "*) ;;
*) dlprefiles="$dlprefiles $lib" ;;
esac
done
if test "$build_libtool_libs" = yes; then
if test -n "$rpath"; then
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
# these systems don't actually have a c library (as such)!
;;
*-*-rhapsody* | *-*-darwin1.[012])
# Rhapsody C library is in the System framework
deplibs="$deplibs -framework System"
;;
*-*-netbsd*)
# Don't link with libc until the a.out ld.so is fixed.
;;
*-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
# Do not include libc due to us having libc/libc_r.
;;
*-*-sco3.2v5* | *-*-sco5v6*)
# Causes problems with __ctype
;;
*-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
# Compiler inserts libc in the correct place for threads to work
;;
*)
# Add libc to deplibs on all other systems if necessary.
if test "$build_libtool_need_lc" = "yes"; then
deplibs="$deplibs -lc"
fi
;;
esac
fi
# Transform deplibs into only deplibs that can be linked in shared.
name_save=$name
libname_save=$libname
release_save=$release
versuffix_save=$versuffix
major_save=$major
# I'm not sure if I'm treating the release correctly. I think
# release should show up in the -l (ie -lgmp5) so we don't want to
# add it in twice. Is that correct?
release=""
versuffix=""
major=""
newdeplibs=
droppeddeps=no
case $deplibs_check_method in
pass_all)
# Don't check for shared/static. Everything works.
# This might be a little naive. We might want to check
# whether the library exists or not. But this is on
# osf3 & osf4 and I'm not really sure... Just
# implementing what was already the behavior.
newdeplibs=$deplibs
;;
test_compile)
# This code stresses the "libraries are programs" paradigm to its
# limits. Maybe even breaks it. We compile a program, linking it
# against the deplibs as a proxy for the library. Then we can check
# whether they linked in statically or dynamically with ldd.
$rm conftest.c
cat > conftest.c <<EOF
int main() { return 0; }
EOF
$rm conftest
if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
ldd_output=`ldd conftest`
for i in $deplibs; do
name=`expr $i : '-l\(.*\)'`
# If $name is empty we are operating on a -L argument.
if test "$name" != "" && test "$name" != "0"; then
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
case " $predeps $postdeps " in
*" $i "*)
newdeplibs="$newdeplibs $i"
i=""
;;
esac
fi
if test -n "$i" ; then
libname=`eval \\$echo \"$libname_spec\"`
deplib_matches=`eval \\$echo \"$library_names_spec\"`
set dummy $deplib_matches
deplib_match=$2
if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
newdeplibs="$newdeplibs $i"
else
droppeddeps=yes
$echo
$echo "*** Warning: dynamic linker does not accept needed library $i."
$echo "*** I have the capability to make that library automatically link in when"
$echo "*** you link to this library. But I can only do this if you have a"
$echo "*** shared version of the library, which I believe you do not have"
$echo "*** because a test_compile did reveal that the linker did not use it for"
$echo "*** its dynamic dependency list that programs get resolved with at runtime."
fi
fi
else
newdeplibs="$newdeplibs $i"
fi
done
else
# Error occurred in the first compile. Let's try to salvage
# the situation: Compile a separate program for each library.
for i in $deplibs; do
name=`expr $i : '-l\(.*\)'`
# If $name is empty we are operating on a -L argument.
if test "$name" != "" && test "$name" != "0"; then
$rm conftest
if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
ldd_output=`ldd conftest`
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
case " $predeps $postdeps " in
*" $i "*)
newdeplibs="$newdeplibs $i"
i=""
;;
esac
fi
if test -n "$i" ; then
libname=`eval \\$echo \"$libname_spec\"`
deplib_matches=`eval \\$echo \"$library_names_spec\"`
set dummy $deplib_matches
deplib_match=$2
if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
newdeplibs="$newdeplibs $i"
else
droppeddeps=yes
$echo
$echo "*** Warning: dynamic linker does not accept needed library $i."
$echo "*** I have the capability to make that library automatically link in when"
$echo "*** you link to this library. But I can only do this if you have a"
$echo "*** shared version of the library, which you do not appear to have"
$echo "*** because a test_compile did reveal that the linker did not use this one"
$echo "*** as a dynamic dependency that programs can get resolved with at runtime."
fi
fi
else
droppeddeps=yes
$echo
$echo "*** Warning! Library $i is needed by this library but I was not able to"
$echo "*** make it link in! You will probably need to install it or some"
$echo "*** library that it depends on before this library will be fully"
$echo "*** functional. Installing it before continuing would be even better."
fi
else
newdeplibs="$newdeplibs $i"
fi
done
fi
;;
file_magic*)
set dummy $deplibs_check_method
file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
for a_deplib in $deplibs; do
name=`expr $a_deplib : '-l\(.*\)'`
# If $name is empty we are operating on a -L argument.
if test "$name" != "" && test "$name" != "0"; then
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
case " $predeps $postdeps " in
*" $a_deplib "*)
newdeplibs="$newdeplibs $a_deplib"
a_deplib=""
;;
esac
fi
if test -n "$a_deplib" ; then
libname=`eval \\$echo \"$libname_spec\"`
for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
for potent_lib in $potential_libs; do
# Follow soft links.
if ls -lLd "$potent_lib" 2>/dev/null \
| grep " -> " >/dev/null; then
continue
fi
# The statement above tries to avoid entering an
# endless loop below, in case of cyclic links.
# We might still enter an endless loop, since a link
# loop can be closed while we follow links,
# but so what?
potlib="$potent_lib"
while test -h "$potlib" 2>/dev/null; do
potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
case $potliblink in
[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
*) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
esac
done
if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
| ${SED} 10q \
| $EGREP "$file_magic_regex" > /dev/null; then
newdeplibs="$newdeplibs $a_deplib"
a_deplib=""
break 2
fi
done
done
fi
if test -n "$a_deplib" ; then
droppeddeps=yes
$echo
$echo "*** Warning: linker path does not have real file for library $a_deplib."
$echo "*** I have the capability to make that library automatically link in when"
$echo "*** you link to this library. But I can only do this if you have a"
$echo "*** shared version of the library, which you do not appear to have"
$echo "*** because I did check the linker path looking for a file starting"
if test -z "$potlib" ; then
$echo "*** with $libname but no candidates were found. (...for file magic test)"
else
$echo "*** with $libname and none of the candidates passed a file format test"
$echo "*** using a file magic. Last file checked: $potlib"
fi
fi
else
# Add a -L argument.
newdeplibs="$newdeplibs $a_deplib"
fi
done # Gone through all deplibs.
;;
match_pattern*)
set dummy $deplibs_check_method
match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
for a_deplib in $deplibs; do
name=`expr $a_deplib : '-l\(.*\)'`
# If $name is empty we are operating on a -L argument.
if test -n "$name" && test "$name" != "0"; then
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
case " $predeps $postdeps " in
*" $a_deplib "*)
newdeplibs="$newdeplibs $a_deplib"
a_deplib=""
;;
esac
fi
if test -n "$a_deplib" ; then
libname=`eval \\$echo \"$libname_spec\"`
for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
for potent_lib in $potential_libs; do
potlib="$potent_lib" # see symlink-check above in file_magic test
if eval $echo \"$potent_lib\" 2>/dev/null \
| ${SED} 10q \
| $EGREP "$match_pattern_regex" > /dev/null; then
newdeplibs="$newdeplibs $a_deplib"
a_deplib=""
break 2
fi
done
done
fi
if test -n "$a_deplib" ; then
droppeddeps=yes
$echo
$echo "*** Warning: linker path does not have real file for library $a_deplib."
$echo "*** I have the capability to make that library automatically link in when"
$echo "*** you link to this library. But I can only do this if you have a"
$echo "*** shared version of the library, which you do not appear to have"
$echo "*** because I did check the linker path looking for a file starting"
if test -z "$potlib" ; then
$echo "*** with $libname but no candidates were found. (...for regex pattern test)"
else
$echo "*** with $libname and none of the candidates passed a file format test"
$echo "*** using a regex pattern. Last file checked: $potlib"
fi
fi
else
# Add a -L argument.
newdeplibs="$newdeplibs $a_deplib"
fi
done # Gone through all deplibs.
;;
none | unknown | *)
newdeplibs=""
tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
-e 's/ -[LR][^ ]*//g'`
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
for i in $predeps $postdeps ; do
# can't use Xsed below, because $i might contain '/'
tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"`
done
fi
if $echo "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' \
| grep . >/dev/null; then
$echo
if test "X$deplibs_check_method" = "Xnone"; then
$echo "*** Warning: inter-library dependencies are not supported in this platform."
else
$echo "*** Warning: inter-library dependencies are not known to be supported."
fi
$echo "*** All declared inter-library dependencies are being dropped."
droppeddeps=yes
fi
;;
esac
versuffix=$versuffix_save
major=$major_save
release=$release_save
libname=$libname_save
name=$name_save
case $host in
*-*-rhapsody* | *-*-darwin1.[012])
# On Rhapsody replace the C library is the System framework
newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'`
;;
esac
if test "$droppeddeps" = yes; then
if test "$module" = yes; then
$echo
$echo "*** Warning: libtool could not satisfy all declared inter-library"
$echo "*** dependencies of module $libname. Therefore, libtool will create"
$echo "*** a static module, that should work as long as the dlopening"
$echo "*** application is linked with the -dlopen flag."
if test -z "$global_symbol_pipe"; then
$echo
$echo "*** However, this would only work if libtool was able to extract symbol"
$echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
$echo "*** not find such a program. So, this module is probably useless."
$echo "*** \`nm' from GNU binutils and a full rebuild may help."
fi
if test "$build_old_libs" = no; then
oldlibs="$output_objdir/$libname.$libext"
build_libtool_libs=module
build_old_libs=yes
else
build_libtool_libs=no
fi
else
$echo "*** The inter-library dependencies that have been dropped here will be"
$echo "*** automatically added whenever a program is linked with this library"
$echo "*** or is declared to -dlopen it."
if test "$allow_undefined" = no; then
$echo
$echo "*** Since this library must not contain undefined symbols,"
$echo "*** because either the platform does not support them or"
$echo "*** it was explicitly requested with -no-undefined,"
$echo "*** libtool will only create a static version of it."
if test "$build_old_libs" = no; then
oldlibs="$output_objdir/$libname.$libext"
build_libtool_libs=module
build_old_libs=yes
else
build_libtool_libs=no
fi
fi
fi
fi
# Done checking deplibs!
deplibs=$newdeplibs
fi
# move library search paths that coincide with paths to not yet
# installed libraries to the beginning of the library search list
new_libs=
for path in $notinst_path; do
case " $new_libs " in
*" -L$path/$objdir "*) ;;
*)
case " $deplibs " in
*" -L$path/$objdir "*)
new_libs="$new_libs -L$path/$objdir" ;;
esac
;;
esac
done
for deplib in $deplibs; do
case $deplib in
-L*)
case " $new_libs " in
*" $deplib "*) ;;
*) new_libs="$new_libs $deplib" ;;
esac
;;
*) new_libs="$new_libs $deplib" ;;
esac
done
deplibs="$new_libs"
# All the library-specific variables (install_libdir is set above).
library_names=
old_library=
dlname=
# Test again, we may have decided not to build it any more
if test "$build_libtool_libs" = yes; then
if test "$hardcode_into_libs" = yes; then
# Hardcode the library paths
hardcode_libdirs=
dep_rpath=
rpath="$finalize_rpath"
test "$mode" != relink && rpath="$compile_rpath$rpath"
for libdir in $rpath; do
if test -n "$hardcode_libdir_flag_spec"; then
if test -n "$hardcode_libdir_separator"; then
if test -z "$hardcode_libdirs"; then
hardcode_libdirs="$libdir"
else
# Just accumulate the unique libdirs.
case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
*"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
;;
*)
hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
;;
esac
fi
else
eval flag=\"$hardcode_libdir_flag_spec\"
dep_rpath="$dep_rpath $flag"
fi
elif test -n "$runpath_var"; then
case "$perm_rpath " in
*" $libdir "*) ;;
*) perm_rpath="$perm_rpath $libdir" ;;
esac
fi
done
# Substitute the hardcoded libdirs into the rpath.
if test -n "$hardcode_libdir_separator" &&
test -n "$hardcode_libdirs"; then
libdir="$hardcode_libdirs"
if test -n "$hardcode_libdir_flag_spec_ld"; then
case $archive_cmds in
*\$LD*) eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" ;;
*) eval dep_rpath=\"$hardcode_libdir_flag_spec\" ;;
esac
else
eval dep_rpath=\"$hardcode_libdir_flag_spec\"
fi
fi
if test -n "$runpath_var" && test -n "$perm_rpath"; then
# We should set the runpath_var.
rpath=
for dir in $perm_rpath; do
rpath="$rpath$dir:"
done
eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
fi
test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
fi
shlibpath="$finalize_shlibpath"
test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
if test -n "$shlibpath"; then
eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
fi
# Get the real and link names of the library.
eval shared_ext=\"$shrext_cmds\"
eval library_names=\"$library_names_spec\"
set dummy $library_names
realname="$2"
shift; shift
if test -n "$soname_spec"; then
eval soname=\"$soname_spec\"
else
soname="$realname"
fi
if test -z "$dlname"; then
dlname=$soname
fi
lib="$output_objdir/$realname"
linknames=
for link
do
linknames="$linknames $link"
done
# Use standard objects if they are pic
test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
# Prepare the list of exported symbols
if test -z "$export_symbols"; then
if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
$show "generating symbol list for \`$libname.la'"
export_symbols="$output_objdir/$libname.exp"
$run $rm $export_symbols
cmds=$export_symbols_cmds
save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
IFS="$save_ifs"
eval cmd=\"$cmd\"
if len=`expr "X$cmd" : ".*"` &&
test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
$show "$cmd"
$run eval "$cmd" || exit $?
skipped_export=false
else
# The command line is too long to execute in one step.
$show "using reloadable object file for export list..."
skipped_export=:
# Break out early, otherwise skipped_export may be
# set to false by a later but shorter cmd.
break
fi
done
IFS="$save_ifs"
if test -n "$export_symbols_regex"; then
$show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
$run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
$show "$mv \"${export_symbols}T\" \"$export_symbols\""
$run eval '$mv "${export_symbols}T" "$export_symbols"'
fi
fi
fi
if test -n "$export_symbols" && test -n "$include_expsyms"; then
$run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
fi
tmp_deplibs=
for test_deplib in $deplibs; do
case " $convenience " in
*" $test_deplib "*) ;;
*)
tmp_deplibs="$tmp_deplibs $test_deplib"
;;
esac
done
deplibs="$tmp_deplibs"
if test -n "$convenience"; then
if test -n "$whole_archive_flag_spec"; then
save_libobjs=$libobjs
eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
else
gentop="$output_objdir/${outputname}x"
generated="$generated $gentop"
func_extract_archives $gentop $convenience
libobjs="$libobjs $func_extract_archives_result"
fi
fi
if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
eval flag=\"$thread_safe_flag_spec\"
linker_flags="$linker_flags $flag"
fi
# Make a backup of the uninstalled library when relinking
if test "$mode" = relink; then
$run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $?
fi
# Do each of the archive commands.
if test "$module" = yes && test -n "$module_cmds" ; then
if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
eval test_cmds=\"$module_expsym_cmds\"
cmds=$module_expsym_cmds
else
eval test_cmds=\"$module_cmds\"
cmds=$module_cmds
fi
else
if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
eval test_cmds=\"$archive_expsym_cmds\"
cmds=$archive_expsym_cmds
else
eval test_cmds=\"$archive_cmds\"
cmds=$archive_cmds
fi
fi
if test "X$skipped_export" != "X:" &&
len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
:
else
# The command line is too long to link in one step, link piecewise.
$echo "creating reloadable object files..."
# Save the value of $output and $libobjs because we want to
# use them later. If we have whole_archive_flag_spec, we
# want to use save_libobjs as it was before
# whole_archive_flag_spec was expanded, because we can't
# assume the linker understands whole_archive_flag_spec.
# This may have to be revisited, in case too many
# convenience libraries get linked in and end up exceeding
# the spec.
if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
save_libobjs=$libobjs
fi
save_output=$output
output_la=`$echo "X$output" | $Xsed -e "$basename"`
# Clear the reloadable object creation command queue and
# initialize k to one.
test_cmds=
concat_cmds=
objlist=
delfiles=
last_robj=
k=1
output=$output_objdir/$output_la-${k}.$objext
# Loop over the list of objects to be linked.
for obj in $save_libobjs
do
eval test_cmds=\"$reload_cmds $objlist $last_robj\"
if test "X$objlist" = X ||
{ len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
test "$len" -le "$max_cmd_len"; }; then
objlist="$objlist $obj"
else
# The command $test_cmds is almost too long, add a
# command to the queue.
if test "$k" -eq 1 ; then
# The first file doesn't have a previous command to add.
eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
else
# All subsequent reloadable object files will link in
# the last one created.
eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
fi
last_robj=$output_objdir/$output_la-${k}.$objext
k=`expr $k + 1`
output=$output_objdir/$output_la-${k}.$objext
objlist=$obj
len=1
fi
done
# Handle the remaining objects by creating one last
# reloadable object file. All subsequent reloadable object
# files will link in the last one created.
test -z "$concat_cmds" || concat_cmds=$concat_cmds~
eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
if ${skipped_export-false}; then
$show "generating symbol list for \`$libname.la'"
export_symbols="$output_objdir/$libname.exp"
$run $rm $export_symbols
libobjs=$output
# Append the command to create the export file.
eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\"
fi
# Set up a command to remove the reloadable object files
# after they are used.
i=0
while test "$i" -lt "$k"
do
i=`expr $i + 1`
delfiles="$delfiles $output_objdir/$output_la-${i}.$objext"
done
$echo "creating a temporary reloadable object file: $output"
# Loop through the commands generated above and execute them.
save_ifs="$IFS"; IFS='~'
for cmd in $concat_cmds; do
IFS="$save_ifs"
$show "$cmd"
$run eval "$cmd" || exit $?
done
IFS="$save_ifs"
libobjs=$output
# Restore the value of output.
output=$save_output
if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
fi
# Expand the library linking commands again to reset the
# value of $libobjs for piecewise linking.
# Do each of the archive commands.
if test "$module" = yes && test -n "$module_cmds" ; then
if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
cmds=$module_expsym_cmds
else
cmds=$module_cmds
fi
else
if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
cmds=$archive_expsym_cmds
else
cmds=$archive_cmds
fi
fi
# Append the command to remove the reloadable object files
# to the just-reset $cmds.
eval cmds=\"\$cmds~\$rm $delfiles\"
fi
save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
IFS="$save_ifs"
eval cmd=\"$cmd\"
$show "$cmd"
$run eval "$cmd" || {
lt_exit=$?
# Restore the uninstalled library and exit
if test "$mode" = relink; then
$run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
fi
exit $lt_exit
}
done
IFS="$save_ifs"
# Restore the uninstalled library and exit
if test "$mode" = relink; then
$run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
if test -n "$convenience"; then
if test -z "$whole_archive_flag_spec"; then
$show "${rm}r $gentop"
$run ${rm}r "$gentop"
fi
fi
exit $EXIT_SUCCESS
fi
# Create links to the real library.
for linkname in $linknames; do
if test "$realname" != "$linkname"; then
$show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"
$run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $?
fi
done
# If -module or -export-dynamic was specified, set the dlname.
if test "$module" = yes || test "$export_dynamic" = yes; then
# On all known operating systems, these are identical.
dlname="$soname"
fi
fi
;;
obj)
if test -n "$deplibs"; then
$echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
fi
if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
$echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
fi
if test -n "$rpath"; then
$echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
fi
if test -n "$xrpath"; then
$echo "$modename: warning: \`-R' is ignored for objects" 1>&2
fi
if test -n "$vinfo"; then
$echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
fi
if test -n "$release"; then
$echo "$modename: warning: \`-release' is ignored for objects" 1>&2
fi
case $output in
*.lo)
if test -n "$objs$old_deplibs"; then
$echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
exit $EXIT_FAILURE
fi
libobj="$output"
obj=`$echo "X$output" | $Xsed -e "$lo2o"`
;;
*)
libobj=
obj="$output"
;;
esac
# Delete the old objects.
$run $rm $obj $libobj
# Objects from convenience libraries. This assumes
# single-version convenience libraries. Whenever we create
# different ones for PIC/non-PIC, this we'll have to duplicate
# the extraction.
reload_conv_objs=
gentop=
# reload_cmds runs $LD directly, so let us get rid of
# -Wl from whole_archive_flag_spec and hope we can get by with
# turning comma into space..
wl=
if test -n "$convenience"; then
if test -n "$whole_archive_flag_spec"; then
eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
reload_conv_objs=$reload_objs\ `$echo "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
else
gentop="$output_objdir/${obj}x"
generated="$generated $gentop"
func_extract_archives $gentop $convenience
reload_conv_objs="$reload_objs $func_extract_archives_result"
fi
fi
# Create the old-style object.
reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
output="$obj"
cmds=$reload_cmds
save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
IFS="$save_ifs"
eval cmd=\"$cmd\"
$show "$cmd"
$run eval "$cmd" || exit $?
done
IFS="$save_ifs"
# Exit if we aren't doing a library object file.
if test -z "$libobj"; then
if test -n "$gentop"; then
$show "${rm}r $gentop"
$run ${rm}r $gentop
fi
exit $EXIT_SUCCESS
fi
if test "$build_libtool_libs" != yes; then
if test -n "$gentop"; then
$show "${rm}r $gentop"
$run ${rm}r $gentop
fi
# Create an invalid libtool object if no PIC, so that we don't
# accidentally link it into a program.
# $show "echo timestamp > $libobj"
# $run eval "echo timestamp > $libobj" || exit $?
exit $EXIT_SUCCESS
fi
if test -n "$pic_flag" || test "$pic_mode" != default; then
# Only do commands if we really have different PIC objects.
reload_objs="$libobjs $reload_conv_objs"
output="$libobj"
cmds=$reload_cmds
save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
IFS="$save_ifs"
eval cmd=\"$cmd\"
$show "$cmd"
$run eval "$cmd" || exit $?
done
IFS="$save_ifs"
fi
if test -n "$gentop"; then
$show "${rm}r $gentop"
$run ${rm}r $gentop
fi
exit $EXIT_SUCCESS
;;
prog)
case $host in
*cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;;
esac
if test -n "$vinfo"; then
$echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
fi
if test -n "$release"; then
$echo "$modename: warning: \`-release' is ignored for programs" 1>&2
fi
if test "$preload" = yes; then
if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown &&
test "$dlopen_self_static" = unknown; then
$echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
fi
fi
case $host in
*-*-rhapsody* | *-*-darwin1.[012])
# On Rhapsody replace the C library is the System framework
compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
;;
esac
case $host in
*darwin*)
# Don't allow lazy linking, it breaks C++ global constructors
if test "$tagname" = CXX ; then
compile_command="$compile_command ${wl}-bind_at_load"
finalize_command="$finalize_command ${wl}-bind_at_load"
fi
;;
esac
# move library search paths that coincide with paths to not yet
# installed libraries to the beginning of the library search list
new_libs=
for path in $notinst_path; do
case " $new_libs " in
*" -L$path/$objdir "*) ;;
*)
case " $compile_deplibs " in
*" -L$path/$objdir "*)
new_libs="$new_libs -L$path/$objdir" ;;
esac
;;
esac
done
for deplib in $compile_deplibs; do
case $deplib in
-L*)
case " $new_libs " in
*" $deplib "*) ;;
*) new_libs="$new_libs $deplib" ;;
esac
;;
*) new_libs="$new_libs $deplib" ;;
esac
done
compile_deplibs="$new_libs"
compile_command="$compile_command $compile_deplibs"
finalize_command="$finalize_command $finalize_deplibs"
if test -n "$rpath$xrpath"; then
# If the user specified any rpath flags, then add them.
for libdir in $rpath $xrpath; do
# This is the magic to use -rpath.
case "$finalize_rpath " in
*" $libdir "*) ;;
*) finalize_rpath="$finalize_rpath $libdir" ;;
esac
done
fi
# Now hardcode the library paths
rpath=
hardcode_libdirs=
for libdir in $compile_rpath $finalize_rpath; do
if test -n "$hardcode_libdir_flag_spec"; then
if test -n "$hardcode_libdir_separator"; then
if test -z "$hardcode_libdirs"; then
hardcode_libdirs="$libdir"
else
# Just accumulate the unique libdirs.
case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
*"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
;;
*)
hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
;;
esac
fi
else
eval flag=\"$hardcode_libdir_flag_spec\"
rpath="$rpath $flag"
fi
elif test -n "$runpath_var"; then
case "$perm_rpath " in
*" $libdir "*) ;;
*) perm_rpath="$perm_rpath $libdir" ;;
esac
fi
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'`
case :$dllsearchpath: in
*":$libdir:"*) ;;
*) dllsearchpath="$dllsearchpath:$libdir";;
esac
case :$dllsearchpath: in
*":$testbindir:"*) ;;
*) dllsearchpath="$dllsearchpath:$testbindir";;
esac
;;
esac
done
# Substitute the hardcoded libdirs into the rpath.
if test -n "$hardcode_libdir_separator" &&
test -n "$hardcode_libdirs"; then
libdir="$hardcode_libdirs"
eval rpath=\" $hardcode_libdir_flag_spec\"
fi
compile_rpath="$rpath"
rpath=
hardcode_libdirs=
for libdir in $finalize_rpath; do
if test -n "$hardcode_libdir_flag_spec"; then
if test -n "$hardcode_libdir_separator"; then
if test -z "$hardcode_libdirs"; then
hardcode_libdirs="$libdir"
else
# Just accumulate the unique libdirs.
case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
*"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
;;
*)
hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
;;
esac
fi
else
eval flag=\"$hardcode_libdir_flag_spec\"
rpath="$rpath $flag"
fi
elif test -n "$runpath_var"; then
case "$finalize_perm_rpath " in
*" $libdir "*) ;;
*) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
esac
fi
done
# Substitute the hardcoded libdirs into the rpath.
if test -n "$hardcode_libdir_separator" &&
test -n "$hardcode_libdirs"; then
libdir="$hardcode_libdirs"
eval rpath=\" $hardcode_libdir_flag_spec\"
fi
finalize_rpath="$rpath"
if test -n "$libobjs" && test "$build_old_libs" = yes; then
# Transform all the library objects into standard objects.
compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
fi
dlsyms=
if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
if test -n "$NM" && test -n "$global_symbol_pipe"; then
dlsyms="${outputname}S.c"
else
$echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
fi
fi
if test -n "$dlsyms"; then
case $dlsyms in
"") ;;
*.c)
# Discover the nlist of each of the dlfiles.
nlist="$output_objdir/${outputname}.nm"
$show "$rm $nlist ${nlist}S ${nlist}T"
$run $rm "$nlist" "${nlist}S" "${nlist}T"
# Parse the name list into a source file.
$show "creating $output_objdir/$dlsyms"
test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
#ifdef __cplusplus
extern \"C\" {
#endif
/* Prevent the only kind of declaration conflicts we can make. */
#define lt_preloaded_symbols some_other_symbol
/* External symbol declarations for the compiler. */\
"
if test "$dlself" = yes; then
$show "generating symbol list for \`$output'"
test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
# Add our own program objects to the symbol list.
progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
for arg in $progfiles; do
$show "extracting global C symbols from \`$arg'"
$run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
done
if test -n "$exclude_expsyms"; then
$run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
$run eval '$mv "$nlist"T "$nlist"'
fi
if test -n "$export_symbols_regex"; then
$run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
$run eval '$mv "$nlist"T "$nlist"'
fi
# Prepare the list of exported symbols
if test -z "$export_symbols"; then
export_symbols="$output_objdir/$outputname.exp"
$run $rm $export_symbols
$run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
case $host in
*cygwin* | *mingw* )
$run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
$run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
;;
esac
else
$run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
$run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
$run eval 'mv "$nlist"T "$nlist"'
case $host in
*cygwin* | *mingw* )
$run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
$run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
;;
esac
fi
fi
for arg in $dlprefiles; do
$show "extracting global C symbols from \`$arg'"
name=`$echo "$arg" | ${SED} -e 's%^.*/%%'`
$run eval '$echo ": $name " >> "$nlist"'
$run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
done
if test -z "$run"; then
# Make sure we have at least an empty file.
test -f "$nlist" || : > "$nlist"
if test -n "$exclude_expsyms"; then
$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
$mv "$nlist"T "$nlist"
fi
# Try sorting and uniquifying the output.
if grep -v "^: " < "$nlist" |
if sort -k 3 </dev/null >/dev/null 2>&1; then
sort -k 3
else
sort +2
fi |
uniq > "$nlist"S; then
:
else
grep -v "^: " < "$nlist" > "$nlist"S
fi
if test -f "$nlist"S; then
eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
else
$echo '/* NONE */' >> "$output_objdir/$dlsyms"
fi
$echo >> "$output_objdir/$dlsyms" "\
#undef lt_preloaded_symbols
#if defined (__STDC__) && __STDC__
# define lt_ptr void *
#else
# define lt_ptr char *
# define const
#endif
/* The mapping between symbol names and symbols. */
"
case $host in
*cygwin* | *mingw* )
$echo >> "$output_objdir/$dlsyms" "\
/* DATA imports from DLLs on WIN32 can't be const, because
runtime relocations are performed -- see ld's documentation
on pseudo-relocs */
struct {
"
;;
* )
$echo >> "$output_objdir/$dlsyms" "\
const struct {
"
;;
esac
$echo >> "$output_objdir/$dlsyms" "\
const char *name;
lt_ptr address;
}
lt_preloaded_symbols[] =
{\
"
eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms"
$echo >> "$output_objdir/$dlsyms" "\
{0, (lt_ptr) 0}
};
/* This works around a problem in FreeBSD linker */
#ifdef FREEBSD_WORKAROUND
static const void *lt_preloaded_setup() {
return lt_preloaded_symbols;
}
#endif
#ifdef __cplusplus
}
#endif\
"
fi
pic_flag_for_symtable=
case $host in
# compiling the symbol table file with pic_flag works around
# a FreeBSD bug that causes programs to crash when -lm is
# linked before any other PIC object. But we must not use
# pic_flag when linking with -static. The problem exists in
# FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
*-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
case "$compile_command " in
*" -static "*) ;;
*) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";;
esac;;
*-*-hpux*)
case "$compile_command " in
*" -static "*) ;;
*) pic_flag_for_symtable=" $pic_flag";;
esac
esac
# Now compile the dynamic symbol file.
$show "(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
$run eval '(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
# Clean up the generated files.
$show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
$run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
# Transform the symbol file into the correct name.
case $host in
*cygwin* | *mingw* )
if test -f "$output_objdir/${outputname}.def" ; then
compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP`
finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP`
else
compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
fi
;;
* )
compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
;;
esac
;;
*)
$echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
exit $EXIT_FAILURE
;;
esac
else
# We keep going just in case the user didn't refer to
# lt_preloaded_symbols. The linker will fail if global_symbol_pipe
# really was required.
# Nullify the symbol file.
compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP`
finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP`
fi
if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
# Replace the output file specification.
compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$output"'%g' | $NL2SP`
link_command="$compile_command$compile_rpath"
# We have no uninstalled library dependencies, so finalize right now.
$show "$link_command"
$run eval "$link_command"
exit_status=$?
# Delete the generated files.
if test -n "$dlsyms"; then
$show "$rm $output_objdir/${outputname}S.${objext}"
$run $rm "$output_objdir/${outputname}S.${objext}"
fi
exit $exit_status
fi
if test -n "$shlibpath_var"; then
# We should set the shlibpath_var
rpath=
for dir in $temp_rpath; do
case $dir in
[\\/]* | [A-Za-z]:[\\/]*)
# Absolute path.
rpath="$rpath$dir:"
;;
*)
# Relative path: add a thisdir entry.
rpath="$rpath\$thisdir/$dir:"
;;
esac
done
temp_rpath="$rpath"
fi
if test -n "$compile_shlibpath$finalize_shlibpath"; then
compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
fi
if test -n "$finalize_shlibpath"; then
finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
fi
compile_var=
finalize_var=
if test -n "$runpath_var"; then
if test -n "$perm_rpath"; then
# We should set the runpath_var.
rpath=
for dir in $perm_rpath; do
rpath="$rpath$dir:"
done
compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
fi
if test -n "$finalize_perm_rpath"; then
# We should set the runpath_var.
rpath=
for dir in $finalize_perm_rpath; do
rpath="$rpath$dir:"
done
finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
fi
fi
if test "$no_install" = yes; then
# We don't need to create a wrapper script.
link_command="$compile_var$compile_command$compile_rpath"
# Replace the output file specification.
link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
# Delete the old output file.
$run $rm $output
# Link the executable and exit
$show "$link_command"
$run eval "$link_command" || exit $?
exit $EXIT_SUCCESS
fi
if test "$hardcode_action" = relink; then
# Fast installation is not supported
link_command="$compile_var$compile_command$compile_rpath"
relink_command="$finalize_var$finalize_command$finalize_rpath"
$echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
$echo "$modename: \`$output' will be relinked during installation" 1>&2
else
if test "$fast_install" != no; then
link_command="$finalize_var$compile_command$finalize_rpath"
if test "$fast_install" = yes; then
relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $SP2NL | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g' | $NL2SP`
else
# fast_install is set to needless
relink_command=
fi
else
link_command="$compile_var$compile_command$compile_rpath"
relink_command="$finalize_var$finalize_command$finalize_rpath"
fi
fi
# Replace the output file specification.
link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
# Delete the old output files.
$run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
$show "$link_command"
$run eval "$link_command" || exit $?
# Now create the wrapper script.
$show "creating $output"
# Quote the relink command for shipping.
if test -n "$relink_command"; then
# Preserve any variables that may affect compiler behavior
for var in $variables_saved_for_relink; do
if eval test -z \"\${$var+set}\"; then
relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
elif eval var_value=\$$var; test -z "$var_value"; then
relink_command="$var=; export $var; $relink_command"
else
var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
relink_command="$var=\"$var_value\"; export $var; $relink_command"
fi
done
relink_command="(cd `pwd`; $relink_command)"
relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP`
fi
# Quote $echo for shipping.
if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then
case $progpath in
[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
*) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
esac
qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
else
qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
fi
# Only actually do things if our run command is non-null.
if test -z "$run"; then
# win32 will think the script is a binary if it has
# a .exe suffix, so we strip it off here.
case $output in
*.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;;
esac
# test for cygwin because mv fails w/o .exe extensions
case $host in
*cygwin*)
exeext=.exe
outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;;
*) exeext= ;;
esac
case $host in
*cygwin* | *mingw* )
output_name=`basename $output`
output_path=`dirname $output`
cwrappersource="$output_path/$objdir/lt-$output_name.c"
cwrapper="$output_path/$output_name.exe"
$rm $cwrappersource $cwrapper
trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
cat > $cwrappersource <<EOF
/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
The $output program cannot be directly executed until all the libtool
libraries that it depends on are installed.
This wrapper executable should never be moved out of the build directory.
If it is, it will not operate correctly.
Currently, it simply execs the wrapper *script* "/bin/sh $output",
but could eventually absorb all of the scripts functionality and
exec $objdir/$outputname directly.
*/
EOF
cat >> $cwrappersource<<"EOF"
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <malloc.h>
#include <stdarg.h>
#include <assert.h>
#include <string.h>
#include <ctype.h>
#include <sys/stat.h>
#if defined(PATH_MAX)
# define LT_PATHMAX PATH_MAX
#elif defined(MAXPATHLEN)
# define LT_PATHMAX MAXPATHLEN
#else
# define LT_PATHMAX 1024
#endif
#ifndef DIR_SEPARATOR
# define DIR_SEPARATOR '/'
# define PATH_SEPARATOR ':'
#endif
#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
defined (__OS2__)
# define HAVE_DOS_BASED_FILE_SYSTEM
# ifndef DIR_SEPARATOR_2
# define DIR_SEPARATOR_2 '\\'
# endif
# ifndef PATH_SEPARATOR_2
# define PATH_SEPARATOR_2 ';'
# endif
#endif
#ifndef DIR_SEPARATOR_2
# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
#else /* DIR_SEPARATOR_2 */
# define IS_DIR_SEPARATOR(ch) \
(((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
#endif /* DIR_SEPARATOR_2 */
#ifndef PATH_SEPARATOR_2
# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
#else /* PATH_SEPARATOR_2 */
# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
#endif /* PATH_SEPARATOR_2 */
#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
#define XFREE(stale) do { \
if (stale) { free ((void *) stale); stale = 0; } \
} while (0)
/* -DDEBUG is fairly common in CFLAGS. */
#undef DEBUG
#if defined DEBUGWRAPPER
# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__)
#else
# define DEBUG(format, ...)
#endif
const char *program_name = NULL;
void * xmalloc (size_t num);
char * xstrdup (const char *string);
const char * base_name (const char *name);
char * find_executable(const char *wrapper);
int check_executable(const char *path);
char * strendzap(char *str, const char *pat);
void lt_fatal (const char *message, ...);
int
main (int argc, char *argv[])
{
char **newargz;
int i;
program_name = (char *) xstrdup (base_name (argv[0]));
DEBUG("(main) argv[0] : %s\n",argv[0]);
DEBUG("(main) program_name : %s\n",program_name);
newargz = XMALLOC(char *, argc+2);
EOF
cat >> $cwrappersource <<EOF
newargz[0] = (char *) xstrdup("$SHELL");
EOF
cat >> $cwrappersource <<"EOF"
newargz[1] = find_executable(argv[0]);
if (newargz[1] == NULL)
lt_fatal("Couldn't find %s", argv[0]);
DEBUG("(main) found exe at : %s\n",newargz[1]);
/* we know the script has the same name, without the .exe */
/* so make sure newargz[1] doesn't end in .exe */
strendzap(newargz[1],".exe");
for (i = 1; i < argc; i++)
newargz[i+1] = xstrdup(argv[i]);
newargz[argc+1] = NULL;
for (i=0; i<argc+1; i++)
{
DEBUG("(main) newargz[%d] : %s\n",i,newargz[i]);
;
}
EOF
case $host_os in
mingw*)
cat >> $cwrappersource <<EOF
execv("$SHELL",(char const **)newargz);
EOF
;;
*)
cat >> $cwrappersource <<EOF
execv("$SHELL",newargz);
EOF
;;
esac
cat >> $cwrappersource <<"EOF"
return 127;
}
void *
xmalloc (size_t num)
{
void * p = (void *) malloc (num);
if (!p)
lt_fatal ("Memory exhausted");
return p;
}
char *
xstrdup (const char *string)
{
return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL
;
}
const char *
base_name (const char *name)
{
const char *base;
#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
/* Skip over the disk name in MSDOS pathnames. */
if (isalpha ((unsigned char)name[0]) && name[1] == ':')
name += 2;
#endif
for (base = name; *name; name++)
if (IS_DIR_SEPARATOR (*name))
base = name + 1;
return base;
}
int
check_executable(const char * path)
{
struct stat st;
DEBUG("(check_executable) : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!");
if ((!path) || (!*path))
return 0;
if ((stat (path, &st) >= 0) &&
(
/* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */
#if defined (S_IXOTH)
((st.st_mode & S_IXOTH) == S_IXOTH) ||
#endif
#if defined (S_IXGRP)
((st.st_mode & S_IXGRP) == S_IXGRP) ||
#endif
((st.st_mode & S_IXUSR) == S_IXUSR))
)
return 1;
else
return 0;
}
/* Searches for the full path of the wrapper. Returns
newly allocated full path name if found, NULL otherwise */
char *
find_executable (const char* wrapper)
{
int has_slash = 0;
const char* p;
const char* p_next;
/* static buffer for getcwd */
char tmp[LT_PATHMAX + 1];
int tmp_len;
char* concat_name;
DEBUG("(find_executable) : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!");
if ((wrapper == NULL) || (*wrapper == '\0'))
return NULL;
/* Absolute path? */
#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':')
{
concat_name = xstrdup (wrapper);
if (check_executable(concat_name))
return concat_name;
XFREE(concat_name);
}
else
{
#endif
if (IS_DIR_SEPARATOR (wrapper[0]))
{
concat_name = xstrdup (wrapper);
if (check_executable(concat_name))
return concat_name;
XFREE(concat_name);
}
#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
}
#endif
for (p = wrapper; *p; p++)
if (*p == '/')
{
has_slash = 1;
break;
}
if (!has_slash)
{
/* no slashes; search PATH */
const char* path = getenv ("PATH");
if (path != NULL)
{
for (p = path; *p; p = p_next)
{
const char* q;
size_t p_len;
for (q = p; *q; q++)
if (IS_PATH_SEPARATOR(*q))
break;
p_len = q - p;
p_next = (*q == '\0' ? q : q + 1);
if (p_len == 0)
{
/* empty path: current directory */
if (getcwd (tmp, LT_PATHMAX) == NULL)
lt_fatal ("getcwd failed");
tmp_len = strlen(tmp);
concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
memcpy (concat_name, tmp, tmp_len);
concat_name[tmp_len] = '/';
strcpy (concat_name + tmp_len + 1, wrapper);
}
else
{
concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1);
memcpy (concat_name, p, p_len);
concat_name[p_len] = '/';
strcpy (concat_name + p_len + 1, wrapper);
}
if (check_executable(concat_name))
return concat_name;
XFREE(concat_name);
}
}
/* not found in PATH; assume curdir */
}
/* Relative path | not found in path: prepend cwd */
if (getcwd (tmp, LT_PATHMAX) == NULL)
lt_fatal ("getcwd failed");
tmp_len = strlen(tmp);
concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
memcpy (concat_name, tmp, tmp_len);
concat_name[tmp_len] = '/';
strcpy (concat_name + tmp_len + 1, wrapper);
if (check_executable(concat_name))
return concat_name;
XFREE(concat_name);
return NULL;
}
char *
strendzap(char *str, const char *pat)
{
size_t len, patlen;
assert(str != NULL);
assert(pat != NULL);
len = strlen(str);
patlen = strlen(pat);
if (patlen <= len)
{
str += len - patlen;
if (strcmp(str, pat) == 0)
*str = '\0';
}
return str;
}
static void
lt_error_core (int exit_status, const char * mode,
const char * message, va_list ap)
{
fprintf (stderr, "%s: %s: ", program_name, mode);
vfprintf (stderr, message, ap);
fprintf (stderr, ".\n");
if (exit_status >= 0)
exit (exit_status);
}
void
lt_fatal (const char *message, ...)
{
va_list ap;
va_start (ap, message);
lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
va_end (ap);
}
EOF
# we should really use a build-platform specific compiler
# here, but OTOH, the wrappers (shell script and this C one)
# are only useful if you want to execute the "real" binary.
# Since the "real" binary is built for $host, then this
# wrapper might as well be built for $host, too.
$run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource
;;
esac
$rm $output
trap "$rm $output; exit $EXIT_FAILURE" 1 2 15
$echo > $output "\
#! $SHELL
# $output - temporary wrapper script for $objdir/$outputname
# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
#
# The $output program cannot be directly executed until all the libtool
# libraries that it depends on are installed.
#
# This wrapper script should never be moved out of the build directory.
# If it is, it will not operate correctly.
# Sed substitution that helps us do robust quoting. It backslashifies
# metacharacters that are still active within double-quoted strings.
Xsed='${SED} -e 1s/^X//'
sed_quote_subst='$sed_quote_subst'
# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
emulate sh
NULLCMD=:
# Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
# is contrary to our usage. Disable this feature.
alias -g '\${1+\"\$@\"}'='\"\$@\"'
setopt NO_GLOB_SUBST
else
case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
fi
BIN_SH=xpg4; export BIN_SH # for Tru64
DUALCASE=1; export DUALCASE # for MKS sh
# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
relink_command=\"$relink_command\"
# This environment variable determines our operation mode.
if test \"\$libtool_install_magic\" = \"$magic\"; then
# install mode needs the following variable:
notinst_deplibs='$notinst_deplibs'
else
# When we are sourced in execute mode, \$file and \$echo are already set.
if test \"\$libtool_execute_magic\" != \"$magic\"; then
echo=\"$qecho\"
file=\"\$0\"
# Make sure echo works.
if test \"X\$1\" = X--no-reexec; then
# Discard the --no-reexec flag, and continue.
shift
elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
# Yippee, \$echo works!
:
else
# Restart under the correct shell, and then maybe \$echo will work.
exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
fi
fi\
"
$echo >> $output "\
# Find the directory that this script lives in.
thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
test \"x\$thisdir\" = \"x\$file\" && thisdir=.
# Follow symbolic links until we get to the real thisdir.
file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
while test -n \"\$file\"; do
destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
# If there was a directory component, then change thisdir.
if test \"x\$destdir\" != \"x\$file\"; then
case \"\$destdir\" in
[\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
*) thisdir=\"\$thisdir/\$destdir\" ;;
esac
fi
file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
done
# Try to get the absolute directory name.
absdir=\`cd \"\$thisdir\" && pwd\`
test -n \"\$absdir\" && thisdir=\"\$absdir\"
"
if test "$fast_install" = yes; then
$echo >> $output "\
program=lt-'$outputname'$exeext
progdir=\"\$thisdir/$objdir\"
if test ! -f \"\$progdir/\$program\" || \\
{ file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
test \"X\$file\" != \"X\$progdir/\$program\"; }; then
file=\"\$\$-\$program\"
if test ! -d \"\$progdir\"; then
$mkdir \"\$progdir\"
else
$rm \"\$progdir/\$file\"
fi"
$echo >> $output "\
# relink executable if necessary
if test -n \"\$relink_command\"; then
if relink_command_output=\`eval \$relink_command 2>&1\`; then :
else
$echo \"\$relink_command_output\" >&2
$rm \"\$progdir/\$file\"
exit $EXIT_FAILURE
fi
fi
$mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
{ $rm \"\$progdir/\$program\";
$mv \"\$progdir/\$file\" \"\$progdir/\$program\"; }
$rm \"\$progdir/\$file\"
fi"
else
$echo >> $output "\
program='$outputname'
progdir=\"\$thisdir/$objdir\"
"
fi
$echo >> $output "\
if test -f \"\$progdir/\$program\"; then"
# Export our shlibpath_var if we have one.
if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
$echo >> $output "\
# Add our own library path to $shlibpath_var
$shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
# Some systems cannot cope with colon-terminated $shlibpath_var
# The second colon is a workaround for a bug in BeOS R4 sed
$shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
export $shlibpath_var
"
fi
# fixup the dll searchpath if we need to.
if test -n "$dllsearchpath"; then
$echo >> $output "\
# Add the dll search path components to the executable PATH
PATH=$dllsearchpath:\$PATH
"
fi
$echo >> $output "\
if test \"\$libtool_execute_magic\" != \"$magic\"; then
# Run the actual program with our arguments.
"
case $host in
# Backslashes separate directories on plain windows
*-*-mingw | *-*-os2*)
$echo >> $output "\
exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
"
;;
*)
$echo >> $output "\
exec \"\$progdir/\$program\" \${1+\"\$@\"}
"
;;
esac
$echo >> $output "\
\$echo \"\$0: cannot exec \$program \$*\"
exit $EXIT_FAILURE
fi
else
# The program doesn't exist.
\$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
\$echo \"This script is just a wrapper for \$program.\" 1>&2
$echo \"See the $PACKAGE documentation for more information.\" 1>&2
exit $EXIT_FAILURE
fi
fi\
"
chmod +x $output
fi
exit $EXIT_SUCCESS
;;
esac
# See if we need to build an old-fashioned archive.
for oldlib in $oldlibs; do
if test "$build_libtool_libs" = convenience; then
oldobjs="$libobjs_save"
addlibs="$convenience"
build_libtool_libs=no
else
if test "$build_libtool_libs" = module; then
oldobjs="$libobjs_save"
build_libtool_libs=no
else
oldobjs="$old_deplibs $non_pic_objects"
fi
addlibs="$old_convenience"
fi
if test -n "$addlibs"; then
gentop="$output_objdir/${outputname}x"
generated="$generated $gentop"
func_extract_archives $gentop $addlibs
oldobjs="$oldobjs $func_extract_archives_result"
fi
# Do each command in the archive commands.
if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
cmds=$old_archive_from_new_cmds
else
# POSIX demands no paths to be encoded in archives. We have
# to avoid creating archives with duplicate basenames if we
# might have to extract them afterwards, e.g., when creating a
# static archive out of a convenience library, or when linking
# the entirety of a libtool archive into another (currently
# not supported by libtool).
if (for obj in $oldobjs
do
$echo "X$obj" | $Xsed -e 's%^.*/%%'
done | sort | sort -uc >/dev/null 2>&1); then
:
else
$echo "copying selected object files to avoid basename conflicts..."
if test -z "$gentop"; then
gentop="$output_objdir/${outputname}x"
generated="$generated $gentop"
$show "${rm}r $gentop"
$run ${rm}r "$gentop"
$show "$mkdir $gentop"
$run $mkdir "$gentop"
exit_status=$?
if test "$exit_status" -ne 0 && test ! -d "$gentop"; then
exit $exit_status
fi
fi
save_oldobjs=$oldobjs
oldobjs=
counter=1
for obj in $save_oldobjs
do
objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
case " $oldobjs " in
" ") oldobjs=$obj ;;
*[\ /]"$objbase "*)
while :; do
# Make sure we don't pick an alternate name that also
# overlaps.
newobj=lt$counter-$objbase
counter=`expr $counter + 1`
case " $oldobjs " in
*[\ /]"$newobj "*) ;;
*) if test ! -f "$gentop/$newobj"; then break; fi ;;
esac
done
$show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
$run ln "$obj" "$gentop/$newobj" ||
$run cp "$obj" "$gentop/$newobj"
oldobjs="$oldobjs $gentop/$newobj"
;;
*) oldobjs="$oldobjs $obj" ;;
esac
done
fi
eval cmds=\"$old_archive_cmds\"
if len=`expr "X$cmds" : ".*"` &&
test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
cmds=$old_archive_cmds
else
# the command line is too long to link in one step, link in parts
$echo "using piecewise archive linking..."
save_RANLIB=$RANLIB
RANLIB=:
objlist=
concat_cmds=
save_oldobjs=$oldobjs
# Is there a better way of finding the last object in the list?
for obj in $save_oldobjs
do
last_oldobj=$obj
done
for obj in $save_oldobjs
do
oldobjs="$objlist $obj"
objlist="$objlist $obj"
eval test_cmds=\"$old_archive_cmds\"
if len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
test "$len" -le "$max_cmd_len"; then
:
else
# the above command should be used before it gets too long
oldobjs=$objlist
if test "$obj" = "$last_oldobj" ; then
RANLIB=$save_RANLIB
fi
test -z "$concat_cmds" || concat_cmds=$concat_cmds~
eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
objlist=
fi
done
RANLIB=$save_RANLIB
oldobjs=$objlist
if test "X$oldobjs" = "X" ; then
eval cmds=\"\$concat_cmds\"
else
eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
fi
fi
fi
save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
eval cmd=\"$cmd\"
IFS="$save_ifs"
$show "$cmd"
$run eval "$cmd" || exit $?
done
IFS="$save_ifs"
done
if test -n "$generated"; then
$show "${rm}r$generated"
$run ${rm}r$generated
fi
# Now create the libtool archive.
case $output in
*.la)
old_library=
test "$build_old_libs" = yes && old_library="$libname.$libext"
$show "creating $output"
# Preserve any variables that may affect compiler behavior
for var in $variables_saved_for_relink; do
if eval test -z \"\${$var+set}\"; then
relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
elif eval var_value=\$$var; test -z "$var_value"; then
relink_command="$var=; export $var; $relink_command"
else
var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
relink_command="$var=\"$var_value\"; export $var; $relink_command"
fi
done
# Quote the link command for shipping.
relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP`
if test "$hardcode_automatic" = yes ; then
relink_command=
fi
# Only create the output if not a dry run.
if test -z "$run"; then
for installed in no yes; do
if test "$installed" = yes; then
if test -z "$install_libdir"; then
break
fi
output="$output_objdir/$outputname"i
# Replace all uninstalled libtool libraries with the installed ones
newdependency_libs=
for deplib in $dependency_libs; do
case $deplib in
*.la)
name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
if test -z "$libdir"; then
$echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
exit $EXIT_FAILURE
fi
newdependency_libs="$newdependency_libs $libdir/$name"
;;
*) newdependency_libs="$newdependency_libs $deplib" ;;
esac
done
dependency_libs="$newdependency_libs"
newdlfiles=
for lib in $dlfiles; do
name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
if test -z "$libdir"; then
$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
exit $EXIT_FAILURE
fi
newdlfiles="$newdlfiles $libdir/$name"
done
dlfiles="$newdlfiles"
newdlprefiles=
for lib in $dlprefiles; do
name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
if test -z "$libdir"; then
$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
exit $EXIT_FAILURE
fi
newdlprefiles="$newdlprefiles $libdir/$name"
done
dlprefiles="$newdlprefiles"
else
newdlfiles=
for lib in $dlfiles; do
case $lib in
[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
*) abs=`pwd`"/$lib" ;;
esac
newdlfiles="$newdlfiles $abs"
done
dlfiles="$newdlfiles"
newdlprefiles=
for lib in $dlprefiles; do
case $lib in
[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
*) abs=`pwd`"/$lib" ;;
esac
newdlprefiles="$newdlprefiles $abs"
done
dlprefiles="$newdlprefiles"
fi
$rm $output
# place dlname in correct position for cygwin
tdlname=$dlname
case $host,$output,$installed,$module,$dlname in
*cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
esac
$echo > $output "\
# $outputname - a libtool library file
# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
#
# Please DO NOT delete this file!
# It is necessary for linking the library.
# The name that we can dlopen(3).
dlname='$tdlname'
# Names of this library.
library_names='$library_names'
# The name of the static archive.
old_library='$old_library'
# Libraries that this one depends upon.
dependency_libs='$dependency_libs'
# Version information for $libname.
current=$current
age=$age
revision=$revision
# Is this an already installed library?
installed=$installed
# Should we warn about portability when linking against -modules?
shouldnotlink=$module
# Files to dlopen/dlpreopen
dlopen='$dlfiles'
dlpreopen='$dlprefiles'
# Directory that this library needs to be installed in:
libdir='$install_libdir'"
if test "$installed" = no && test "$need_relink" = yes; then
$echo >> $output "\
relink_command=\"$relink_command\""
fi
done
fi
# Do a symbolic link so that the libtool archive can be found in
# LD_LIBRARY_PATH before the program is installed.
$show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
$run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
;;
esac
exit $EXIT_SUCCESS
;;
# libtool install mode
install)
modename="$modename: install"
# There may be an optional sh(1) argument at the beginning of
# install_prog (especially on Windows NT).
if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
# Allow the use of GNU shtool's install command.
$echo "X$nonopt" | grep shtool > /dev/null; then
# Aesthetically quote it.
arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
case $arg in
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
arg="\"$arg\""
;;
esac
install_prog="$arg "
arg="$1"
shift
else
install_prog=
arg=$nonopt
fi
# The real first argument should be the name of the installation program.
# Aesthetically quote it.
arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
case $arg in
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
arg="\"$arg\""
;;
esac
install_prog="$install_prog$arg"
# We need to accept at least all the BSD install flags.
dest=
files=
opts=
prev=
install_type=
isdir=no
stripme=
for arg
do
if test -n "$dest"; then
files="$files $dest"
dest=$arg
continue
fi
case $arg in
-d) isdir=yes ;;
-f)
case " $install_prog " in
*[\\\ /]cp\ *) ;;
*) prev=$arg ;;
esac
;;
-g | -m | -o) prev=$arg ;;
-s)
stripme=" -s"
continue
;;
-*)
;;
*)
# If the previous option needed an argument, then skip it.
if test -n "$prev"; then
prev=
else
dest=$arg
continue
fi
;;
esac
# Aesthetically quote the argument.
arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
case $arg in
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
arg="\"$arg\""
;;
esac
install_prog="$install_prog $arg"
done
if test -z "$install_prog"; then
$echo "$modename: you must specify an install program" 1>&2
$echo "$help" 1>&2
exit $EXIT_FAILURE
fi
if test -n "$prev"; then
$echo "$modename: the \`$prev' option requires an argument" 1>&2
$echo "$help" 1>&2
exit $EXIT_FAILURE
fi
if test -z "$files"; then
if test -z "$dest"; then
$echo "$modename: no file or destination specified" 1>&2
else
$echo "$modename: you must specify a destination" 1>&2
fi
$echo "$help" 1>&2
exit $EXIT_FAILURE
fi
# Strip any trailing slash from the destination.
dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
# Check to see that the destination is a directory.
test -d "$dest" && isdir=yes
if test "$isdir" = yes; then
destdir="$dest"
destname=
else
destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
test "X$destdir" = "X$dest" && destdir=.
destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
# Not a directory, so check to see that there is only one file specified.
set dummy $files
if test "$#" -gt 2; then
$echo "$modename: \`$dest' is not a directory" 1>&2
$echo "$help" 1>&2
exit $EXIT_FAILURE
fi
fi
case $destdir in
[\\/]* | [A-Za-z]:[\\/]*) ;;
*)
for file in $files; do
case $file in
*.lo) ;;
*)
$echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
$echo "$help" 1>&2
exit $EXIT_FAILURE
;;
esac
done
;;
esac
# This variable tells wrapper scripts just to set variables rather
# than running their programs.
libtool_install_magic="$magic"
staticlibs=
future_libdirs=
current_libdirs=
for file in $files; do
# Do each installation.
case $file in
*.$libext)
# Do the static libraries later.
staticlibs="$staticlibs $file"
;;
*.la)
# Check to see that this really is a libtool archive.
if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
else
$echo "$modename: \`$file' is not a valid libtool archive" 1>&2
$echo "$help" 1>&2
exit $EXIT_FAILURE
fi
library_names=
old_library=
relink_command=
# If there is no directory component, then add one.
case $file in
*/* | *\\*) . $file ;;
*) . ./$file ;;
esac
# Add the libdir to current_libdirs if it is the destination.
if test "X$destdir" = "X$libdir"; then
case "$current_libdirs " in
*" $libdir "*) ;;
*) current_libdirs="$current_libdirs $libdir" ;;
esac
else
# Note the libdir as a future libdir.
case "$future_libdirs " in
*" $libdir "*) ;;
*) future_libdirs="$future_libdirs $libdir" ;;
esac
fi
dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/
test "X$dir" = "X$file/" && dir=
dir="$dir$objdir"
if test -n "$relink_command"; then
# Determine the prefix the user has applied to our future dir.
inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"`
# Don't allow the user to place us outside of our expected
# location b/c this prevents finding dependent libraries that
# are installed to the same prefix.
# At present, this check doesn't affect windows .dll's that
# are installed into $libdir/../bin (currently, that works fine)
# but it's something to keep an eye on.
if test "$inst_prefix_dir" = "$destdir"; then
$echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
exit $EXIT_FAILURE
fi
if test -n "$inst_prefix_dir"; then
# Stick the inst_prefix_dir data into the link command.
relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%" | $NL2SP`
else
relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%%" | $NL2SP`
fi
$echo "$modename: warning: relinking \`$file'" 1>&2
$show "$relink_command"
if $run eval "$relink_command"; then :
else
$echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
exit $EXIT_FAILURE
fi
fi
# See the names of the shared library.
set dummy $library_names
if test -n "$2"; then
realname="$2"
shift
shift
srcname="$realname"
test -n "$relink_command" && srcname="$realname"T
# Install the shared library and build the symlinks.
$show "$install_prog $dir/$srcname $destdir/$realname"
$run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $?
if test -n "$stripme" && test -n "$striplib"; then
$show "$striplib $destdir/$realname"
$run eval "$striplib $destdir/$realname" || exit $?
fi
if test "$#" -gt 0; then
# Delete the old symlinks, and create new ones.
# Try `ln -sf' first, because the `ln' binary might depend on
# the symlink we replace! Solaris /bin/ln does not understand -f,
# so we also need to try rm && ln -s.
for linkname
do
if test "$linkname" != "$realname"; then
$show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
$run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
fi
done
fi
# Do each command in the postinstall commands.
lib="$destdir/$realname"
cmds=$postinstall_cmds
save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
IFS="$save_ifs"
eval cmd=\"$cmd\"
$show "$cmd"
$run eval "$cmd" || {
lt_exit=$?
# Restore the uninstalled library and exit
if test "$mode" = relink; then
$run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
fi
exit $lt_exit
}
done
IFS="$save_ifs"
fi
# Install the pseudo-library for information purposes.
name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
instname="$dir/$name"i
$show "$install_prog $instname $destdir/$name"
$run eval "$install_prog $instname $destdir/$name" || exit $?
# Maybe install the static library, too.
test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
;;
*.lo)
# Install (i.e. copy) a libtool object.
# Figure out destination file name, if it wasn't already specified.
if test -n "$destname"; then
destfile="$destdir/$destname"
else
destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
destfile="$destdir/$destfile"
fi
# Deduce the name of the destination old-style object file.
case $destfile in
*.lo)
staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
;;
*.$objext)
staticdest="$destfile"
destfile=
;;
*)
$echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
$echo "$help" 1>&2
exit $EXIT_FAILURE
;;
esac
# Install the libtool object if requested.
if test -n "$destfile"; then
$show "$install_prog $file $destfile"
$run eval "$install_prog $file $destfile" || exit $?
fi
# Install the old object if enabled.
if test "$build_old_libs" = yes; then
# Deduce the name of the old-style object file.
staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
$show "$install_prog $staticobj $staticdest"
$run eval "$install_prog \$staticobj \$staticdest" || exit $?
fi
exit $EXIT_SUCCESS
;;
*)
# Figure out destination file name, if it wasn't already specified.
if test -n "$destname"; then
destfile="$destdir/$destname"
else
destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
destfile="$destdir/$destfile"
fi
# If the file is missing, and there is a .exe on the end, strip it
# because it is most likely a libtool script we actually want to
# install
stripped_ext=""
case $file in
*.exe)
if test ! -f "$file"; then
file=`$echo $file|${SED} 's,.exe$,,'`
stripped_ext=".exe"
fi
;;
esac
# Do a test to see if this is really a libtool program.
case $host in
*cygwin*|*mingw*)
wrapper=`$echo $file | ${SED} -e 's,.exe$,,'`
;;
*)
wrapper=$file
;;
esac
if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then
notinst_deplibs=
relink_command=
# Note that it is not necessary on cygwin/mingw to append a dot to
# foo even if both foo and FILE.exe exist: automatic-append-.exe
# behavior happens only for exec(3), not for open(2)! Also, sourcing
# `FILE.' does not work on cygwin managed mounts.
#
# If there is no directory component, then add one.
case $wrapper in
*/* | *\\*) . ${wrapper} ;;
*) . ./${wrapper} ;;
esac
# Check the variables that should have been set.
if test -z "$notinst_deplibs"; then
$echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2
exit $EXIT_FAILURE
fi
finalize=yes
for lib in $notinst_deplibs; do
# Check to see that each library is installed.
libdir=
if test -f "$lib"; then
# If there is no directory component, then add one.
case $lib in
*/* | *\\*) . $lib ;;
*) . ./$lib ;;
esac
fi
libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
if test -n "$libdir" && test ! -f "$libfile"; then
$echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
finalize=no
fi
done
relink_command=
# Note that it is not necessary on cygwin/mingw to append a dot to
# foo even if both foo and FILE.exe exist: automatic-append-.exe
# behavior happens only for exec(3), not for open(2)! Also, sourcing
# `FILE.' does not work on cygwin managed mounts.
#
# If there is no directory component, then add one.
case $wrapper in
*/* | *\\*) . ${wrapper} ;;
*) . ./${wrapper} ;;
esac
outputname=
if test "$fast_install" = no && test -n "$relink_command"; then
if test "$finalize" = yes && test -z "$run"; then
tmpdir=`func_mktempdir`
file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
outputname="$tmpdir/$file"
# Replace the output file specification.
relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g' | $NL2SP`
$show "$relink_command"
if $run eval "$relink_command"; then :
else
$echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
${rm}r "$tmpdir"
continue
fi
file="$outputname"
else
$echo "$modename: warning: cannot relink \`$file'" 1>&2
fi
else
# Install the binary that we compiled earlier.
file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
fi
fi
# remove .exe since cygwin /usr/bin/install will append another
# one anyway
case $install_prog,$host in
*/usr/bin/install*,*cygwin*)
case $file:$destfile in
*.exe:*.exe)
# this is ok
;;
*.exe:*)
destfile=$destfile.exe
;;
*:*.exe)
destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'`
;;
esac
;;
esac
$show "$install_prog$stripme $file $destfile"
$run eval "$install_prog\$stripme \$file \$destfile" || exit $?
test -n "$outputname" && ${rm}r "$tmpdir"
;;
esac
done
for file in $staticlibs; do
name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
# Set up the ranlib parameters.
oldlib="$destdir/$name"
$show "$install_prog $file $oldlib"
$run eval "$install_prog \$file \$oldlib" || exit $?
if test -n "$stripme" && test -n "$old_striplib"; then
$show "$old_striplib $oldlib"
$run eval "$old_striplib $oldlib" || exit $?
fi
# Do each command in the postinstall commands.
cmds=$old_postinstall_cmds
save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
IFS="$save_ifs"
eval cmd=\"$cmd\"
$show "$cmd"
$run eval "$cmd" || exit $?
done
IFS="$save_ifs"
done
if test -n "$future_libdirs"; then
$echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
fi
if test -n "$current_libdirs"; then
# Maybe just do a dry run.
test -n "$run" && current_libdirs=" -n$current_libdirs"
exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
else
exit $EXIT_SUCCESS
fi
;;
# libtool finish mode
finish)
modename="$modename: finish"
libdirs="$nonopt"
admincmds=
if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
for dir
do
libdirs="$libdirs $dir"
done
for libdir in $libdirs; do
if test -n "$finish_cmds"; then
# Do each command in the finish commands.
cmds=$finish_cmds
save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
IFS="$save_ifs"
eval cmd=\"$cmd\"
$show "$cmd"
$run eval "$cmd" || admincmds="$admincmds
$cmd"
done
IFS="$save_ifs"
fi
if test -n "$finish_eval"; then
# Do the single finish_eval.
eval cmds=\"$finish_eval\"
$run eval "$cmds" || admincmds="$admincmds
$cmds"
fi
done
fi
# Exit here if they wanted silent mode.
test "$show" = : && exit $EXIT_SUCCESS
$echo "X----------------------------------------------------------------------" | $Xsed
$echo "Libraries have been installed in:"
for libdir in $libdirs; do
$echo " $libdir"
done
$echo
$echo "If you ever happen to want to link against installed libraries"
$echo "in a given directory, LIBDIR, you must either use libtool, and"
$echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
$echo "flag during linking and do at least one of the following:"
if test -n "$shlibpath_var"; then
$echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
$echo " during execution"
fi
if test -n "$runpath_var"; then
$echo " - add LIBDIR to the \`$runpath_var' environment variable"
$echo " during linking"
fi
if test -n "$hardcode_libdir_flag_spec"; then
libdir=LIBDIR
eval flag=\"$hardcode_libdir_flag_spec\"
$echo " - use the \`$flag' linker flag"
fi
if test -n "$admincmds"; then
$echo " - have your system administrator run these commands:$admincmds"
fi
if test -f /etc/ld.so.conf; then
$echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
fi
$echo
$echo "See any operating system documentation about shared libraries for"
$echo "more information, such as the ld(1) and ld.so(8) manual pages."
$echo "X----------------------------------------------------------------------" | $Xsed
exit $EXIT_SUCCESS
;;
# libtool execute mode
execute)
modename="$modename: execute"
# The first argument is the command name.
cmd="$nonopt"
if test -z "$cmd"; then
$echo "$modename: you must specify a COMMAND" 1>&2
$echo "$help"
exit $EXIT_FAILURE
fi
# Handle -dlopen flags immediately.
for file in $execute_dlfiles; do
if test ! -f "$file"; then
$echo "$modename: \`$file' is not a file" 1>&2
$echo "$help" 1>&2
exit $EXIT_FAILURE
fi
dir=
case $file in
*.la)
# Check to see that this really is a libtool archive.
if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
else
$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
$echo "$help" 1>&2
exit $EXIT_FAILURE
fi
# Read the libtool library.
dlname=
library_names=
# If there is no directory component, then add one.
case $file in
*/* | *\\*) . $file ;;
*) . ./$file ;;
esac
# Skip this library if it cannot be dlopened.
if test -z "$dlname"; then
# Warn if it was a shared library.
test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
continue
fi
dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
test "X$dir" = "X$file" && dir=.
if test -f "$dir/$objdir/$dlname"; then
dir="$dir/$objdir"
else
if test ! -f "$dir/$dlname"; then
$echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
exit $EXIT_FAILURE
fi
fi
;;
*.lo)
# Just add the directory containing the .lo file.
dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
test "X$dir" = "X$file" && dir=.
;;
*)
$echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
continue
;;
esac
# Get the absolute pathname.
absdir=`cd "$dir" && pwd`
test -n "$absdir" && dir="$absdir"
# Now add the directory to shlibpath_var.
if eval "test -z \"\$$shlibpath_var\""; then
eval "$shlibpath_var=\"\$dir\""
else
eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
fi
done
# This variable tells wrapper scripts just to set shlibpath_var
# rather than running their programs.
libtool_execute_magic="$magic"
# Check if any of the arguments is a wrapper script.
args=
for file
do
case $file in
-*) ;;
*)
# Do a test to see if this is really a libtool program.
if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
# If there is no directory component, then add one.
case $file in
*/* | *\\*) . $file ;;
*) . ./$file ;;
esac
# Transform arg to wrapped name.
file="$progdir/$program"
fi
;;
esac
# Quote arguments (to preserve shell metacharacters).
file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
args="$args \"$file\""
done
if test -z "$run"; then
if test -n "$shlibpath_var"; then
# Export the shlibpath_var.
eval "export $shlibpath_var"
fi
# Restore saved environment variables
for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
do
eval "if test \"\${save_$lt_var+set}\" = set; then
$lt_var=\$save_$lt_var; export $lt_var
fi"
done
# Now prepare to actually exec the command.
exec_cmd="\$cmd$args"
else
# Display what would be done.
if test -n "$shlibpath_var"; then
eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
$echo "export $shlibpath_var"
fi
$echo "$cmd$args"
exit $EXIT_SUCCESS
fi
;;
# libtool clean and uninstall mode
clean | uninstall)
modename="$modename: $mode"
rm="$nonopt"
files=
rmforce=
exit_status=0
# This variable tells wrapper scripts just to set variables rather
# than running their programs.
libtool_install_magic="$magic"
for arg
do
case $arg in
-f) rm="$rm $arg"; rmforce=yes ;;
-*) rm="$rm $arg" ;;
*) files="$files $arg" ;;
esac
done
if test -z "$rm"; then
$echo "$modename: you must specify an RM program" 1>&2
$echo "$help" 1>&2
exit $EXIT_FAILURE
fi
rmdirs=
origobjdir="$objdir"
for file in $files; do
dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
if test "X$dir" = "X$file"; then
dir=.
objdir="$origobjdir"
else
objdir="$dir/$origobjdir"
fi
name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
test "$mode" = uninstall && objdir="$dir"
# Remember objdir for removal later, being careful to avoid duplicates
if test "$mode" = clean; then
case " $rmdirs " in
*" $objdir "*) ;;
*) rmdirs="$rmdirs $objdir" ;;
esac
fi
# Don't error if the file doesn't exist and rm -f was used.
if (test -L "$file") >/dev/null 2>&1 \
|| (test -h "$file") >/dev/null 2>&1 \
|| test -f "$file"; then
:
elif test -d "$file"; then
exit_status=1
continue
elif test "$rmforce" = yes; then
continue
fi
rmfiles="$file"
case $name in
*.la)
# Possibly a libtool archive, so verify it.
if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
. $dir/$name
# Delete the libtool libraries and symlinks.
for n in $library_names; do
rmfiles="$rmfiles $objdir/$n"
done
test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
case "$mode" in
clean)
case " $library_names " in
# " " in the beginning catches empty $dlname
*" $dlname "*) ;;
*) rmfiles="$rmfiles $objdir/$dlname" ;;
esac
test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
;;
uninstall)
if test -n "$library_names"; then
# Do each command in the postuninstall commands.
cmds=$postuninstall_cmds
save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
IFS="$save_ifs"
eval cmd=\"$cmd\"
$show "$cmd"
$run eval "$cmd"
if test "$?" -ne 0 && test "$rmforce" != yes; then
exit_status=1
fi
done
IFS="$save_ifs"
fi
if test -n "$old_library"; then
# Do each command in the old_postuninstall commands.
cmds=$old_postuninstall_cmds
save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
IFS="$save_ifs"
eval cmd=\"$cmd\"
$show "$cmd"
$run eval "$cmd"
if test "$?" -ne 0 && test "$rmforce" != yes; then
exit_status=1
fi
done
IFS="$save_ifs"
fi
# FIXME: should reinstall the best remaining shared library.
;;
esac
fi
;;
*.lo)
# Possibly a libtool object, so verify it.
if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
# Read the .lo file
. $dir/$name
# Add PIC object to the list of files to remove.
if test -n "$pic_object" \
&& test "$pic_object" != none; then
rmfiles="$rmfiles $dir/$pic_object"
fi
# Add non-PIC object to the list of files to remove.
if test -n "$non_pic_object" \
&& test "$non_pic_object" != none; then
rmfiles="$rmfiles $dir/$non_pic_object"
fi
fi
;;
*)
if test "$mode" = clean ; then
noexename=$name
case $file in
*.exe)
file=`$echo $file|${SED} 's,.exe$,,'`
noexename=`$echo $name|${SED} 's,.exe$,,'`
# $file with .exe has already been added to rmfiles,
# add $file without .exe
rmfiles="$rmfiles $file"
;;
esac
# Do a test to see if this is a libtool program.
if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
relink_command=
. $dir/$noexename
# note $name still contains .exe if it was in $file originally
# as does the version of $file that was added into $rmfiles
rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
if test "$fast_install" = yes && test -n "$relink_command"; then
rmfiles="$rmfiles $objdir/lt-$name"
fi
if test "X$noexename" != "X$name" ; then
rmfiles="$rmfiles $objdir/lt-${noexename}.c"
fi
fi
fi
;;
esac
$show "$rm $rmfiles"
$run $rm $rmfiles || exit_status=1
done
objdir="$origobjdir"
# Try to remove the ${objdir}s in the directories where we deleted files
for dir in $rmdirs; do
if test -d "$dir"; then
$show "rmdir $dir"
$run rmdir $dir >/dev/null 2>&1
fi
done
exit $exit_status
;;
"")
$echo "$modename: you must specify a MODE" 1>&2
$echo "$generic_help" 1>&2
exit $EXIT_FAILURE
;;
esac
if test -z "$exec_cmd"; then
$echo "$modename: invalid operation mode \`$mode'" 1>&2
$echo "$generic_help" 1>&2
exit $EXIT_FAILURE
fi
fi # test -z "$show_help"
if test -n "$exec_cmd"; then
eval exec $exec_cmd
exit $EXIT_FAILURE
fi
# We need to display help for each of the modes.
case $mode in
"") $echo \
"Usage: $modename [OPTION]... [MODE-ARG]...
Provide generalized library-building support services.
--config show all configuration variables
--debug enable verbose shell tracing
-n, --dry-run display commands without modifying any files
--features display basic configuration information and exit
--finish same as \`--mode=finish'
--help display this help message and exit
--mode=MODE use operation mode MODE [default=inferred from MODE-ARGS]
--quiet same as \`--silent'
--silent don't print informational messages
--tag=TAG use configuration variables from tag TAG
--version print version information
MODE must be one of the following:
clean remove files from the build directory
compile compile a source file into a libtool object
execute automatically set library path, then run a program
finish complete the installation of libtool libraries
install install libraries or executables
link create a library or an executable
uninstall remove libraries from an installed directory
MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for
a more detailed description of MODE.
Report bugs to <bug-libtool@gnu.org>."
exit $EXIT_SUCCESS
;;
clean)
$echo \
"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
Remove files from the build directory.
RM is the name of the program to use to delete files associated with each FILE
(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
to RM.
If FILE is a libtool library, object or program, all the files associated
with it are deleted. Otherwise, only FILE itself is deleted using RM."
;;
compile)
$echo \
"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
Compile a source file into a libtool library object.
This mode accepts the following additional options:
-o OUTPUT-FILE set the output file name to OUTPUT-FILE
-prefer-pic try to building PIC objects only
-prefer-non-pic try to building non-PIC objects only
-static always build a \`.o' file suitable for static linking
COMPILE-COMMAND is a command to be used in creating a \`standard' object file
from the given SOURCEFILE.
The output file name is determined by removing the directory component from
SOURCEFILE, then substituting the C source code suffix \`.c' with the
library object suffix, \`.lo'."
;;
execute)
$echo \
"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
Automatically set library path, then run a program.
This mode accepts the following additional options:
-dlopen FILE add the directory containing FILE to the library path
This mode sets the library path environment variable according to \`-dlopen'
flags.
If any of the ARGS are libtool executable wrappers, then they are translated
into their corresponding uninstalled binary, and any of their required library
directories are added to the library path.
Then, COMMAND is executed, with ARGS as arguments."
;;
finish)
$echo \
"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
Complete the installation of libtool libraries.
Each LIBDIR is a directory that contains libtool libraries.
The commands that this mode executes may require superuser privileges. Use
the \`--dry-run' option if you just want to see what would be executed."
;;
install)
$echo \
"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
Install executables or libraries.
INSTALL-COMMAND is the installation command. The first component should be
either the \`install' or \`cp' program.
The rest of the components are interpreted as arguments to that command (only
BSD-compatible install options are recognized)."
;;
link)
$echo \
"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
Link object files or libraries together to form another library, or to
create an executable program.
LINK-COMMAND is a command using the C compiler that you would use to create
a program from several object files.
The following components of LINK-COMMAND are treated specially:
-all-static do not do any dynamic linking at all
-avoid-version do not add a version suffix if possible
-dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
-dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
-export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
-export-symbols SYMFILE
try to export only the symbols listed in SYMFILE
-export-symbols-regex REGEX
try to export only the symbols matching REGEX
-LLIBDIR search LIBDIR for required installed libraries
-lNAME OUTPUT-FILE requires the installed library libNAME
-module build a library that can dlopened
-no-fast-install disable the fast-install mode
-no-install link a not-installable executable
-no-undefined declare that a library does not refer to external symbols
-o OUTPUT-FILE create OUTPUT-FILE from the specified objects
-objectlist FILE Use a list of object files found in FILE to specify objects
-precious-files-regex REGEX
don't remove output files matching REGEX
-release RELEASE specify package release information
-rpath LIBDIR the created library will eventually be installed in LIBDIR
-R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
-static do not do any dynamic linking of uninstalled libtool libraries
-static-libtool-libs
do not do any dynamic linking of libtool libraries
-version-info CURRENT[:REVISION[:AGE]]
specify library version info [each variable defaults to 0]
All other options (arguments beginning with \`-') are ignored.
Every other argument is treated as a filename. Files ending in \`.la' are
treated as uninstalled libtool libraries, other files are standard or library
object files.
If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
only library objects (\`.lo' files) may be specified, and \`-rpath' is
required, except when creating a convenience library.
If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
using \`ar' and \`ranlib', or on Windows using \`lib'.
If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
is created, otherwise an executable program is created."
;;
uninstall)
$echo \
"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
Remove libraries from an installation directory.
RM is the name of the program to use to delete files associated with each FILE
(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
to RM.
If FILE is a libtool library, all the files associated with it are deleted.
Otherwise, only FILE itself is deleted using RM."
;;
*)
$echo "$modename: invalid operation mode \`$mode'" 1>&2
$echo "$help" 1>&2
exit $EXIT_FAILURE
;;
esac
$echo
$echo "Try \`$modename --help' for more information about other modes."
exit $?
# The TAGs below are defined such that we never get into a situation
# in which we disable both kinds of libraries. Given conflicting
# choices, we go for a static library, that is the most portable,
# since we can't tell whether shared libraries were disabled because
# the user asked for that or because the platform doesn't support
# them. This is particularly important on AIX, because we don't
# support having both static and shared libraries enabled at the same
# time on that platform, so we default to a shared-only configuration.
# If a disable-shared tag is given, we'll fallback to a static-only
# configuration. But we'll never go from static-only to shared-only.
# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
disable_libs=shared
# ### END LIBTOOL TAG CONFIG: disable-shared
# ### BEGIN LIBTOOL TAG CONFIG: disable-static
disable_libs=static
# ### END LIBTOOL TAG CONFIG: disable-static
# Local Variables:
# mode:shell-script
# sh-indentation:2
# End:
Go to most recent revision | Compare with Previous | Blame | View Log