URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [or1ksim/] [peripheral/] [eth.h] - Rev 165
Go to most recent revision | Compare with Previous | Blame | View Log
/* eth.h -- Simulation of Ethernet MAC header Copyright (C) 2001 Erez Volk, erez@mailandnews.comopencores.org Copyright (C) 2008 Embecosm Limited Contributor Jeremy Bennett <jeremy.bennett@embecosm.com> This file is part of Or1ksim, the OpenRISC 1000 Architectural Simulator. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ /* This program is commented throughout in a fashion suitable for processing with Doxygen. */ #ifndef ETH__H #define ETH__H #if HAVE_ETH_PHY #include <netpacket/packet.h> #endif /* HAVE_ETH_PHY */ #if HAVE_NET_ETHERNET_H # include <net/ethernet.h> #elif defined(HAVE_SYS_ETHERNET_H) # include <sys/ethernet.h> #else /* !HAVE_NET_ETHERNET_H && !HAVE_SYS_ETHERNET_H - */ #include <sys/types.h> #endif /* Address space required by one Ethernet MAC */ #define ETH_ADDR_SPACE 0x1000 /* Relative Register Addresses */ #define ETH_MODER (4 * 0x00) #define ETH_INT_SOURCE (4 * 0x01) #define ETH_INT_MASK (4 * 0x02) #define ETH_IPGT (4 * 0x03) #define ETH_IPGR1 (4 * 0x04) #define ETH_IPGR2 (4 * 0x05) #define ETH_PACKETLEN (4 * 0x06) #define ETH_COLLCONF (4 * 0x07) #define ETH_TX_BD_NUM (4 * 0x08) #define ETH_CTRLMODER (4 * 0x09) #define ETH_MIIMODER (4 * 0x0A) #define ETH_MIICOMMAND (4 * 0x0B) #define ETH_MIIADDRESS (4 * 0x0C) #define ETH_MIITX_DATA (4 * 0x0D) #define ETH_MIIRX_DATA (4 * 0x0E) #define ETH_MIISTATUS (4 * 0x0F) #define ETH_MAC_ADDR0 (4 * 0x10) #define ETH_MAC_ADDR1 (4 * 0x11) #define ETH_HASH0 (4 * 0x12) #define ETH_HASH1 (4 * 0x13) /* Where BD's are stored */ #define ETH_BD_BASE 0x400 #define ETH_BD_COUNT 0x100 #define ETH_BD_SPACE (4 * ETH_BD_COUNT) /* Where to point DMA to transmit/receive */ #define ETH_DMA_RX_TX 0x800 /* Field definitions for MODER */ #define ETH_MODER_DMAEN_OFFSET 17 #define ETH_MODER_RECSMALL_OFFSET 16 #define ETH_MODER_PAD_OFFSET 15 #define ETH_MODER_HUGEN_OFFSET 14 #define ETH_MODER_CRCEN_OFFSET 13 #define ETH_MODER_DLYCRCEN_OFFSET 12 #define ETH_MODER_RST_OFFSET 11 #define ETH_MODER_FULLD_OFFSET 10 #define ETH_MODER_EXDFREN_OFFSET 9 #define ETH_MODER_NOBCKOF_OFFSET 8 #define ETH_MODER_LOOPBCK_OFFSET 7 #define ETH_MODER_IFG_OFFSET 6 #define ETH_MODER_PRO_OFFSET 5 #define ETH_MODER_IAM_OFFSET 4 #define ETH_MODER_BRO_OFFSET 3 #define ETH_MODER_NOPRE_OFFSET 2 #define ETH_MODER_TXEN_OFFSET 1 #define ETH_MODER_RXEN_OFFSET 0 /* Field definitions for INT_SOURCE */ #define ETH_INT_SOURCE_RXC_OFFSET 6 #define ETH_INT_SOURCE_TXC_OFFSET 5 #define ETH_INT_SOURCE_BUSY_OFFSET 4 #define ETH_INT_SOURCE_RXE_OFFSET 3 #define ETH_INT_SOURCE_RXB_OFFSET 2 #define ETH_INT_SOURCE_TXE_OFFSET 1 #define ETH_INT_SOURCE_TXB_OFFSET 0 /* Field definitions for INT_MASK */ #define ETH_INT_MASK_RXC_M_OFFSET 6 #define ETH_INT_MASK_TXC_M_OFFSET 5 #define ETH_INT_MASK_BUSY_M_OFFSET 4 #define ETH_INT_MASK_RXE_M_OFFSET 3 #define ETH_INT_MASK_RXB_M_OFFSET 2 #define ETH_INT_MASK_TXE_M_OFFSET 1 #define ETH_INT_MASK_TXB_M_OFFSET 0 /* Field definitions for PACKETLEN */ #define ETH_PACKETLEN_MINFL_OFFSET 16 #define ETH_PACKETLEN_MINFL_WIDTH 16 #define ETH_PACKETLEN_MAXFL_OFFSET 0 #define ETH_PACKETLEN_MAXFL_WIDTH 16 /* Field definitions for COLLCONF */ #define ETH_COLLCONF_MAXRET_OFFSET 16 #define ETH_COLLCONF_MAXRET_WIDTH 4 #define ETH_COLLCONF_COLLVALID_OFFSET 0 #define ETH_COLLCONF_COLLVALID_WIDTH 6 /* Field definitions for CTRLMODER */ #define ETH_CMODER_TXFLOW_OFFSET 2 #define ETH_CMODER_RXFLOW_OFFSET 1 #define ETH_CMODER_PASSALL_OFFSET 0 /* Field definitions for MIIMODER */ #define ETH_MIIMODER_MRST_OFFSET 9 #define ETH_MIIMODER_NOPRE_OFFSET 8 #define ETH_MIIMODER_CLKDIV_OFFSET 0 #define ETH_MIIMODER_CLKDIV_WIDTH 8 /* Field definitions for MIICOMMAND */ #define ETH_MIICOMM_WCDATA_OFFSET 2 #define ETH_MIICOMM_RSTAT_OFFSET 1 #define ETH_MIICOMM_SCANS_OFFSET 0 /* Field definitions for MIIADDRESS */ #define ETH_MIIADDR_RGAD_OFFSET 8 #define ETH_MIIADDR_RGAD_WIDTH 5 #define ETH_MIIADDR_FIAD_OFFSET 0 #define ETH_MIIADDR_FIAD_WIDTH 5 /* Field definitions for MIISTATUS */ #define ETH_MIISTAT_NVALID_OFFSET 1 #define ETH_MIISTAT_BUSY_OFFSET 1 #define ETH_MIISTAT_FAIL_OFFSET 0 /* Field definitions for TX buffer descriptors */ #define ETH_TX_BD_LENGTH_OFFSET 16 #define ETH_TX_BD_LENGTH_WIDTH 16 #define ETH_TX_BD_READY_OFFSET 15 #define ETH_TX_BD_IRQ_OFFSET 14 #define ETH_TX_BD_WRAP_OFFSET 13 #define ETH_TX_BD_PAD_OFFSET 12 #define ETH_TX_BD_CRC_OFFSET 11 #define ETH_TX_BD_LAST_OFFSET 10 #define ETH_TX_BD_PAUSE_OFFSET 9 #define ETH_TX_BD_UNDERRUN_OFFSET 8 #define ETH_TX_BD_RETRY_OFFSET 4 #define ETH_TX_BD_RETRY_WIDTH 4 #define ETH_TX_BD_RETRANSMIT_OFFSET 3 #define ETH_TX_BD_COLLISION_OFFSET 2 #define ETH_TX_BD_DEFER_OFFSET 1 #define ETH_TX_BD_NO_CARRIER_OFFSET 0 /* Field definitions for RX buffer descriptors */ #define ETH_RX_BD_LENGTH_OFFSET 16 #define ETH_RX_BD_LENGTH_WIDTH 16 #define ETH_RX_BD_READY_OFFSET 15 #define ETH_RX_BD_IRQ_OFFSET 14 #define ETH_RX_BD_WRAP_OFFSET 13 #define ETH_RX_BD_MISS_OFFSET 7 #define ETH_RX_BD_UVERRUN_OFFSET 6 #define ETH_RX_BD_INVALID_OFFSET 5 #define ETH_RX_BD_DRIBBLE_OFFSET 4 #define ETH_RX_BD_TOOBIG_OFFSET 3 #define ETH_RX_BD_TOOSHORT_OFFSET 2 #define ETH_RX_BD_CRC_OFFSET 1 #define ETH_RX_BD_COLLISION_OFFSET 0 /* * Ethernet protocol definitions */ #ifdef HAVE_NET_ETHERNET_H #elif defined(HAVE_SYS_ETHERNET_H) #ifndef ETHER_ADDR_LEN #define ETHER_ADDR_LEN ETHERADDRL #endif #ifndef ETHER_HDR_LEN #define ETHER_HDR_LEN sizeof(struct ether_header) #endif #else /* !HAVE_NET_ETHERNET_H && !HAVE_SYS_ETHERNET_H - */ #ifdef __CYGWIN__ /* define some missing cygwin defines. * * NOTE! there is no nonblocking socket option implemented in cygwin.dll * so defining MSG_DONTWAIT is just (temporary) workaround !!! */ #define MSG_DONTWAIT 0x40 #define ETH_HLEN 14 #endif /* __CYGWIN__ */ #define ETH_ALEN 6 struct ether_addr { u_int8_t ether_addr_octet[ETH_ALEN]; }; struct ether_header { u_int8_t ether_dhost[ETH_ALEN]; /* destination eth addr */ u_int8_t ether_shost[ETH_ALEN]; /* source ether addr */ u_int16_t ether_type; /* packet type ID field */ }; /* Ethernet protocol ID's */ #define ETHERTYPE_PUP 0x0200 /* Xerox PUP */ #define ETHERTYPE_IP 0x0800 /* IP */ #define ETHERTYPE_ARP 0x0806 /* Address resolution */ #define ETHERTYPE_REVARP 0x8035 /* Reverse ARP */ #define ETHER_ADDR_LEN ETH_ALEN /* size of ethernet addr */ #define ETHER_TYPE_LEN 2 /* bytes in type field */ #define ETHER_CRC_LEN 4 /* bytes in CRC field */ #define ETHER_HDR_LEN ETH_HLEN /* total octets in header */ #define ETHER_MIN_LEN (ETH_ZLEN + ETHER_CRC_LEN) /* min packet length */ #define ETHER_MAX_LEN (ETH_FRAME_LEN + ETHER_CRC_LEN) /* max packet length */ /* make sure ethenet length is valid */ #define ETHER_IS_VALID_LEN(foo) \ ((foo) >= ETHER_MIN_LEN && (foo) <= ETHER_MAX_LEN) /* * The ETHERTYPE_NTRAILER packet types starting at ETHERTYPE_TRAIL have * (type-ETHERTYPE_TRAIL)*512 bytes of data followed * by an ETHER type (as given above) and then the (variable-length) header. */ #define ETHERTYPE_TRAIL 0x1000 /* Trailer packet */ #define ETHERTYPE_NTRAILER 16 #define ETHERMTU ETH_DATA_LEN #define ETHERMIN (ETHER_MIN_LEN-ETHER_HDR_LEN-ETHER_CRC_LEN) #endif /* HAVE_NET_ETHERNET_H */ /* * Implementatino of Ethernet MAC Registers and State */ #define ETH_TXSTATE_IDLE 0 #define ETH_TXSTATE_WAIT4BD 10 #define ETH_TXSTATE_READFIFO 20 #define ETH_TXSTATE_TRANSMIT 30 #define ETH_RXSTATE_IDLE 0 #define ETH_RXSTATE_WAIT4BD 10 #define ETH_RXSTATE_RECV 20 #define ETH_RXSTATE_WRITEFIFO 30 #define ETH_RTX_FILE 0 #define ETH_RTX_SOCK 1 #define ETH_RTX_VAPI 2 #define ETH_MAXPL 0x10000 enum { ETH_VAPI_DATA = 0, ETH_VAPI_CTRL, ETH_NUM_VAPI_IDS }; /* Prototypes for external use */ extern void reg_ethernet_sec (); #endif /* ETH__H */
Go to most recent revision | Compare with Previous | Blame | View Log