URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [or1ksim/] [peripheral/] [vga.c] - Rev 655
Go to most recent revision | Compare with Previous | Blame | View Log
/* vga.c -- Definition of types and structures for VGA/LCD Copyright (C) 2001 Marko Mlinar, markom@opencores.org Copyright (C) 2008 Embecosm Limited Contributor Jeremy Bennett <jeremy.bennett@embecosm.com> This file is part of Or1ksim, the OpenRISC 1000 Architectural Simulator. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ /* This program is commented throughout in a fashion suitable for processing with Doxygen. */ /* Autoconf and/or portability configuration */ #include "config.h" #include "port.h" /* System includes */ #include <stdlib.h> #include <stdio.h> /* Package includes */ #include "arch.h" #include "sim-config.h" #include "abstract.h" #include "sched.h" #include "toplevel-support.h" #define VGA_CTRL 0x00 /* Control Register */ #define VGA_STAT 0x04 /* Status Register */ #define VGA_HTIM 0x08 /* Horizontal Timing Register */ #define VGA_VTIM 0x0c /* Vertical Timing Register */ #define VGA_HVLEN 0x10 /* Horizontal and Vertical Length Register */ #define VGA_VBARA 0x14 /* Video Memory Base Address Register A */ #define VGA_VBARB 0x18 /* Video Memory Base Address Register B */ #define VGA_CLUTA 0x800 #define VGA_CLUTB 0xc00 #define VGA_MASK 0xfff #define VGA_ADDR_SPACE 1024 /* List of implemented registers; all other are ignored. */ /* Control Register */ #define VGA_CTRL_VEN 0x00000001 /* Video Enable */ #define VGA_CTRL_CD 0x00000300 /* Color Depth */ #define VGA_CTRL_PC 0x00000400 /* Pseudo Color */ /* Status Register */ /* Horiz. Timing Register */ /* Vert. Timing Register */ /* Horiz. and Vert. Length Register */ /* When this counter reaches config.vgas[].refresh_rate, a screenshot is taken and outputted */ struct vga_state { int enabled; int pics; unsigned long ctrl, stat, htim, vtim; int vbindex; unsigned long vbar[2]; unsigned hlen, vlen; int pindex; unsigned long palette[2][256]; oraddr_t baseaddr; int refresh_rate; int irq; char *filename; }; /* Write a register */ void vga_write32 (oraddr_t addr, uint32_t value, void *dat) { struct vga_state *vga = dat; switch (addr) { case VGA_CTRL: vga->ctrl = value; break; case VGA_STAT: vga->stat = value; break; case VGA_HTIM: vga->htim = value; break; case VGA_VTIM: vga->vtim = value; break; case VGA_HVLEN: vga->hlen = (value >> 16) + 2; vga->hlen = (value & 0xffff) + 2; break; case VGA_VBARA: vga->vbar[0] = value; break; case VGA_VBARB: vga->vbar[1] = value; break; default: if (addr >= VGA_CLUTA && addr < VGA_CLUTB) { vga->palette[0][addr - VGA_CLUTA] = value & 0x00ffffff; } else if (addr >= VGA_CLUTB) { vga->palette[1][addr - VGA_CLUTB] = value & 0x00ffffff; } else { fprintf (stderr, "vga_write32( 0x%" PRIxADDR ", 0x%08" PRIx32 " ): Out of range\n", addr + vga->baseaddr, value); return; } break; } } /* Read a register */ uint32_t vga_read32 (oraddr_t addr, void *dat) { struct vga_state *vga = dat; switch (addr) { case VGA_CTRL: return vga->ctrl; case VGA_STAT: return vga->stat; case VGA_HTIM: return vga->htim; case VGA_VTIM: return vga->vtim; case VGA_HVLEN: return ((vga->hlen - 2) << 16) | (vga->vlen - 2); case VGA_VBARA: return vga->vbar[0]; case VGA_VBARB: return vga->vbar[1]; default: if (addr >= VGA_CLUTA && addr < VGA_CLUTB) { return vga->palette[0][addr - VGA_CLUTA]; } else if (addr >= VGA_CLUTB) { return vga->palette[1][addr - VGA_CLUTB]; } else { fprintf (stderr, "vga_read32( 0x%" PRIxADDR " ): Out of range\n", addr); return 0; } break; } return 0; } /* This code will only work on little endian machines */ #ifdef __BIG_ENDIAN__ #warning Image dump not supported on big endian machines static int vga_dump_image (char *filename, struct vga_start *vga) { return 1; } #else typedef struct { unsigned short int type; /* Magic identifier */ unsigned int size; /* File size in bytes */ unsigned short int reserved1, reserved2; unsigned int offset; /* Offset to image data, bytes */ } BMP_HEADER; typedef struct { unsigned int size; /* Header size in bytes */ int width, height; /* Width and height of image */ unsigned short int planes; /* Number of colour planes */ unsigned short int bits; /* Bits per pixel */ unsigned int compression; /* Compression type */ unsigned int imagesize; /* Image size in bytes */ int xresolution, yresolution; /* Pixels per meter */ unsigned int ncolours; /* Number of colours */ unsigned int importantcolours; /* Important colours */ } INFOHEADER; /* Dumps a bmp file, based on current image */ static int vga_dump_image (char *filename, struct vga_state *vga) { int sx = vga->hlen; int sy = vga->vlen; int i, x = 0, y = 0; int pc = vga->ctrl & VGA_CTRL_PC; int rbpp = vga->ctrl & VGA_CTRL_CD; int bpp = rbpp >> 8; BMP_HEADER bh; INFOHEADER ih; FILE *fo; if (!sx || !sy) return 1; /* 16bpp and 32 bpp will be converted to 24bpp */ if (bpp == 1 || bpp == 3) bpp = 2; bh.type = 19778; /* BM */ bh.size = sizeof (BMP_HEADER) + sizeof (INFOHEADER) + sx * sy * (bpp * 4 + 4) + (pc ? 1024 : 0); bh.reserved1 = bh.reserved2 = 0; bh.offset = sizeof (BMP_HEADER) + sizeof (INFOHEADER) + (pc ? 1024 : 0); ih.size = sizeof (INFOHEADER); ih.width = sx; ih.height = sy; ih.planes = 1; ih.bits = bpp * 4 + 4; ih.compression = 0; ih.imagesize = x * y * (bpp * 4 + 4); ih.xresolution = ih.yresolution = 0; ih.ncolours = 0; /* should be generated */ ih.importantcolours = 0; /* all are important */ fo = fopen (filename, "wb+"); if (!fwrite (&bh, sizeof (BMP_HEADER), 1, fo)) return 1; if (!fwrite (&ih, sizeof (INFOHEADER), 1, fo)) return 1; if (pc) { /* Write palette? */ for (i = 0; i < 256; i++) { unsigned long val, d; d = vga->palette[vga->pindex][i]; val = (d >> 0) & 0xff; /* Blue */ val |= (d >> 8) & 0xff; /* Green */ val |= (d >> 16) & 0xff; /* Red */ if (!fwrite (&val, sizeof (val), 1, fo)) return 1; } } /* Data is stored upside down */ for (y = sy - 1; y >= 0; y--) { int align = 4 - ((bpp + 1) * sx) % 4; int zero = 0; for (x = 0; x < sx; x++) { unsigned long pixel = eval_direct32 (vga->vbar[vga->vbindex] + (y * sx + x) * (bpp + 1), 0, 0); if (!fwrite (&pixel, sizeof (pixel), 1, fo)) return 1; } if (!fwrite (&zero, align, 1, fo)) return 1; } fclose (fo); return 0; } #endif /* !__BIG_ENDIAN__ */ void vga_job (void *dat) { struct vga_state *vga = dat; /* dump the image? */ char temp[STR_SIZE]; sprintf (temp, "%s%04i.bmp", vga->filename, vga->pics++); vga_dump_image (temp, vga); SCHED_ADD (vga_job, dat, vga->refresh_rate); } /* Reset all VGAs */ void vga_reset (void *dat) { struct vga_state *vga = dat; int i; /* Init palette */ for (i = 0; i < 256; i++) vga->palette[0][i] = vga->palette[1][i] = 0; vga->ctrl = vga->stat = vga->htim = vga->vtim = 0; vga->hlen = vga->vlen = 0; vga->vbar[0] = vga->vbar[1] = 0; /* Init screen dumping machine */ vga->pics = 0; vga->pindex = 0; vga->vbindex = 0; SCHED_ADD (vga_job, dat, vga->refresh_rate); } /*----------------------------------------------------[ VGA Configuration ]---*/ static void vga_enabled (union param_val val, void *dat) { struct vga_state *vga = dat; vga->enabled = val.int_val; } static void vga_baseaddr (union param_val val, void *dat) { struct vga_state *vga = dat; vga->baseaddr = val.addr_val; } static void vga_irq (union param_val val, void *dat) { struct vga_state *vga = dat; vga->irq = val.int_val; } static void vga_refresh_rate (union param_val val, void *dat) { struct vga_state *vga = dat; vga->refresh_rate = val.int_val; } /*---------------------------------------------------------------------------*/ /*!Set the VGA output file Free any previously allocated value. @param[in] val The value to use @param[in] dat The config data structure */ /*---------------------------------------------------------------------------*/ static void vga_filename (union param_val val, void *dat) { struct vga_state *vga = dat; if (NULL != vga->filename) { free (vga->filename); vga->filename = NULL; } if (NULL == (vga->filename = strdup (val.str_val))) { fprintf (stderr, "ERROR: Out of memory\n"); exit (-1); } } /* vga_filename() */ /*---------------------------------------------------------------------------*/ /*!Initialize a new VGA configuration ALL parameters are set explicitly to default values. */ /*---------------------------------------------------------------------------*/ static void * vga_sec_start () { struct vga_state *new = malloc (sizeof (struct vga_state)); if (!new) { fprintf (stderr, "Peripheral VGA: Run out of memory\n"); exit (-1); } new->enabled = 1; new->baseaddr = 0; new->irq = 0; new->refresh_rate = 1000000000000ULL / 50ULL / config.sim.clkcycle_ps; new->filename = strdup ("vga_out"); return new; } /* vga_sec_start() */ static void vga_sec_end (void *dat) { struct vga_state *vga = dat; struct mem_ops ops; if (!vga->enabled) { free (vga->filename); free (vga); return; } memset (&ops, 0, sizeof (struct mem_ops)); ops.readfunc32 = vga_read32; ops.writefunc32 = vga_write32; ops.write_dat32 = dat; ops.read_dat32 = dat; /* FIXME: Correct delay? */ ops.delayr = 2; ops.delayw = 2; reg_mem_area (vga->baseaddr, VGA_ADDR_SPACE, 0, &ops); reg_sim_reset (vga_reset, dat); } /*---------------------------------------------------------------------------*/ /*!Create a new VGA configuration ALL parameters are set explicitly to default values. Alternative naming for file parameter supported. */ /*---------------------------------------------------------------------------*/ void reg_vga_sec () { struct config_section *sec = reg_config_sec ("vga", vga_sec_start, vga_sec_end); reg_config_param (sec, "baseaddr", PARAMT_ADDR, vga_baseaddr); reg_config_param (sec, "enabled", PARAMT_INT, vga_enabled); reg_config_param (sec, "irq", PARAMT_INT, vga_irq); reg_config_param (sec, "refresh_rate", PARAMT_INT, vga_refresh_rate); reg_config_param (sec, "txfile", PARAMT_STR, vga_filename); reg_config_param (sec, "filename", PARAMT_STR, vga_filename); } /* reg_vga_sec() */
Go to most recent revision | Compare with Previous | Blame | View Log