URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [or1ksim/] [testsuite/] [ChangeLog] - Rev 584
Go to most recent revision | Compare with Previous | Blame | View Log
2011-06-06 Julius Baxter <julius@opencores.rg>
* test-code-or1k/Makefile.am: Added pcu to SUBDIRS
* test-code-or1k/Makefile.in: Regenerated
* test-code-or1k/configure.ac: Added pcu/Makefile
* test-code-or1k/pcu/pcu.S: Added.
* test-code-or1k/pcu/Makefile.am: Added.
* or1ksim.tests/Makefile.am: Added pcu.exp to EXTRA_DIST
* or1ksim.tests/pcu.cfg: Added, has section enabling PCU
* or1ksim.tests/pcu.exp: Added.
* or1ksim.tests/mmu.exp: Set timeout to 30 seconds.
* or1ksim.tests/Makefile.in: Regenerated.
* README: Updated with details of PCU test.
2011-01-04 Jeremy Bennett <jeremy.bennett@embecosm.com>
* README: Updated with details of new tests.
2011-01-04 Julius Baxter <julius@opencores.org>
* libsim.tests/default.cfg: Remove superfluous sections. Change CPU
SR to 0x8001 (unset EPH bit).
* libsim.tests/int-edge.cfg: Remove MC section
* libsim.tests/int-level.cfg: Ditto
* libsim.tests/upcalls.cfg: Ditto, also remove other superfluous
section definitions.
* test-code-or1k/basic/Makefile.am: Add default linker and exception
library to LDADD flags.
* test-code-or1k/basic/basic.S: Remove reset section and MC init. Add
main section symbol.
* test-code-or1k/default.ld: Remove flash section (all flash boot
capability has been removed from software.)
Place exception handlers in except section.
<_bstart>:Added to indicate start of BSS section
<_bend>:Added to indicate end of BSS section
* test-code-or1k/except-mc.ld: Added (.rodata.*) to data section.
* test-code-or1k/except/except.S: Remove MC init code.
Remove code which copied program from flash to RAM on boot.
Added all handler sections.
Fixed bug with DTLB handler which would -4 off EPCR.
Now take care to create exception stack past redzone of 128 bytes.
* test-code-or1k/tick/tick.c:
(tick_int_spurious): Fix apparent bug with spurious interrupt test
which would continue interrupting the program, not allowing it to
proceed. Achieve by clearing ttmr when enough interrupts were seen.
* test-code-or1k/ext/ext.S: Add labels for linker sections.
* test-code-or1k/cache/cache.ld: Similar changes to default.ld
* test-code-or1k/cache/cache-asm.S: Remove MC init and relocation code.
* test-code-or1k/cache/cache.c: Remove UART code.
(init_cache_config): Add function for automatic detection of cache
settings.
* test-code-or1k/fp/fp.S: Remove MC init code.
(illegal_insn): Added illegal instruction handler to indicate if FPU
needs to be enabled.
* test-code-or1k/mc-ssram/mc-ssram.c: <gpio_pat>: Init to 0 to stop GCC
warning.
* test-code-or1k/mul/mul.c:
(macrc): Add l.nops before l.macrc. Workaround for bug #1930.
* test-code-or1k/mmu/mmu.c: Almost entirely reimplemented, based on
version from ORPSoC.
* test-code-or1k/mmu/mmu-asm.S: Clobber r3 instead of r11 in lo_immu_en
* test-code-or1k/cfg/cfg.S: Change section labels to allow use with new
default.ld.
* test-code-or1k/except-test/except-test-s.S: Remove MC init code.
Add new reset section code.
Add .org directives for each vector handler.
Change immediate of l.trap to 15 from 1
* test-code-or1k/except-test/except-test.c: <FLASH_START>: Removed,
substituted with RAM_START where appropriate.
<FLASH_SIZE>: Removed.
<RAM_SIZE>: Changed to 2MB.
<TEST_BASE>: Removed as was not used.
Added some printf() output to indicate progress of test.
* test-code-or1k/dhry/dhry.c: <DBG>: Removed all #if sections for this
define.
* test-code-or1k/int-test/int-test.ld: Removed
* test-code-or1k/int-test/int-test.S: Remove MC init code.
Changed reset section to except section.
* test-code-or1k/int-test/Makefile.am: <int_test_LDFLAGS>: Changed to
use default.ld.
* test-code-or1k/flag/flag.S: Change exceptions to be in .except section
* test-code-or1k/mc-sync/Makefile.am: <mc_sync_CPPFLAGS>: Added
mc-common as include path.
* test-code-or1k/mc-async/Makefile.am: <mc_async_CPPFLAGS>: Ditto.
* test-code-or1k/support/support.c:
(printf): Added ignoring of '.' in printf format fields.
* or1ksim.tests/default.cfg: Removed MC section.
* or1ksim.tests/mem-test.exp: Updated expect list.
* or1ksim.tests/mmu.cfg: Added CPU section. Removed MC section.
* or1ksim.tests/cache.exp: Updated expect list.
* or1ksim.tests/eth.cfg: Removed MC section.
* or1ksim.tests/mmu.exp: Updated expect list.
* or1ksim.tests/kbdtest.cfg: Removed MC section.
* or1ksim.tests/int-test.exp: Updated expect list.
* or1ksim.tests/fp.cfg: Removed MC section.
* test-code/lib-upcalls/lib-upcalls.c: Added explicit handling of
OR1KSIM_RC_HALTED return code from library run execute function.
2010-12-27 Julius Baxter <julius@opencores.org>
* or1ksim.tests/eth.cfg: Ethernet section, commented out sockif setting,
added dummy_crc set to false.
2010-11-26 Jeremy Bennett <jeremy.bennett@embecosm.com>
* libsim.tests/default.cfg: Updated Ethernet rtx_type parameter.
* libsim.tests/int-edge.cfg: Updated Ethernet rtx_type parameter.
* libsim.tests/int-level.cfg: Updated Ethernet rtx_type parameter.
* libsim.tests/upcalls.cfg: Updated Ethernet rtx_type parameter.
* or1ksim.tests/default.cfg: Updated Ethernet rtx_type parameter.
* or1ksim.tests/eth.cfg: Updated Ethernet rtx_type parameter.
* or1ksim.tests/fp.cfg: Updated Ethernet rtx_type parameter.
* or1ksim.tests/kbdtest.cfg: Updated Ethernet rtx_type parameter.
2010-11-25 Jeremy Bennett <jeremy.bennett@embecosm.com>
* libsim.tests/int-edge.exp: Updated for new interrupt interface.
* libsim.tests/int-level.exp: Updated for new interrupt interface.
* README: Updated to change number of interrupt tests in library.
2010-11-24 Jeremy Bennett <jeremy.bennett@embecosm.com>
* test-code/lib-inttest/Makefile.am: Updated to use lib-inttest.c
to build a single program.
* test-code/lib-inttest/Makefile.in: Regenerated.
* test-code/lib-inttest/lib-inttest.c: Created.
* test-code/lib-inttest/lib-inttest-edge.c: Deleted.
* test-code/lib-inttest/lib-inttest-level.c: Deleted.
2010-09-07 Jeremy Bennett <jeremy.bennett@embecosm.com>
* libsim.tests/int-edge.exp <int-edge simple 1>: Increase time
between interrupts to 2ms.
<int-edge simple 2>: Increase time between interrupts to 2ms.
<int-edge duplicated 1>: Increase time between interrupts to 2ms.
<int-edge duplicated 2>: Increase time between interrupts to 2ms.
2010-08-03 Jeremy Bennett <jeremy.bennett@embecosm.com>
* or1ksim.tests/eth.cfg: Fix section debug to use RSP only.
* or1ksim.tests/kbdtest.cfg: Fix section debug to use RSP only.
2010-08-03 Jeremy Bennett <jeremy.bennett@embecosm.com>
* or1ksim.tests/testfloat.exp: Modified to use fp.cfg, corrected
which tests are counted. Fixed change of timeout.
* or1ksim.tests/testfloat.cfg: Deleted.
* or1ksim.tests/Makefile.am: Added testfloat.exp to distribution.
2010-08-03 Julius Baxter <julius.baxter@orsoc.se>
* or1ksim.tests/fp.exp: Update expected output.
* or1ksim.tests/testfloat.exp: Expect file for testfloat sw.
* or1ksim.tests/testfloat.cfg: Sim config file for testfloat.
2010-07-23 Jeremy Bennett <jeremy.bennett@embecosm.com>
* or1ksim.tests/except-test.exp: Output no longer reports out of
memory exceptions.
* libsim.tests/jtag-write-control.exp
<JTAG WRITE_CONTROL CPU0 reset>: No PIC reset.
<JTAG WRITE_CONTROL CPU0 stall and reset>: No PIC reset.
<JTAG WRITE_CONTROL CPU0 stall then reset>: No PIC reset.
* libsim.tests/upcalls.exp <upcalls - basic, upcalls - misaligned>:
No output from exit.
* test-code/lib-iftest/lib-iftest.c (main): New interface to
or1ksim_init.
* test-code/lib-inttest/lib-inttest-edge.c (main): New interface to
or1ksim_init.
* test-code/lib-inttest/lib-inttest-level.c (main): New interface to
or1ksim_init.
* test-code/lib-jtag/lib-jtag.c (main): New interface to
or1ksim_init.
* test-code/lib-jtag/lib-jtag-full.c (main): New interface to
or1ksim_init.
* test-code/lib-upcalls/lib-upcalls.c (main): New interface to
or1ksim_init.
2010-06-15 Jeremy Bennett <jeremy.bennett@embecosm.com>
* or1ksim.tests/inst-set-test.exp: Added tests for l.mfspr and
l.mtspr, l.sub, logical and shift instructions.
2010-06-14 Jeremy Bennett <jeremy.bennett@embecosm.com>
* or1ksim.tests/inst-set-test.exp: Modified output from RANGE
exception. Added tests for jump and rotate right instructions.
2010-06-13 Jeremy Bennett <jeremy.bennett@embecosm.com>
* or1ksim.tests/inst-set-test.exp: Added multiplication
tests. Extended divistion tests. Changed output to match new
format from existing tests.
* README: Updated with new tests.
2010-06-11 Jeremy Bennett <jeremy.bennett@embecosm.com>
* or1ksim.tests/inst-set-test.exp: Added MAC tests.
* or1ksim.tests/mul.exp: Corrected erroneous expected results.
* README: Updated with new tests.
2010-06-10 Jeremy Bennett <jeremy.bennett@embecosm.com>
* or1ksim.tests/inst-set-test.exp: Added find tests.
* README: Updated with new tests.
2010-06-10 Jeremy Bennett <jeremy.bennett@embecosm.com>
* or1ksim.tests/inst-set-test.exp: Extended addition tests.
* README: Updated with new tests.
2010-06-09 Jeremy Bennett <jeremy.bennett@embecosm.com>
* or1ksim.tests/inst-set-test.exp: Added division and addition tests.
* README: Updated with new tests.
2010-06-06 Jeremy Bennett <jeremy.bennett@embecosm.com>
* or1ksim.tests/inst-set-test.cfg: Created.
* or1ksim.tests/inst-set-test.exp: Created.
* or1ksim.tests/Makefile.am: Updated to reflect added and deleted
files.
* or1ksim.tests/Makefile.in: Regenerated
* or1ksim.tests/lws-test.exp: Deleted (incorporated within
inst-set-test.ex).
* README: Updated to reflect new structure.
2010-06-03 Jeremy Bennett <jeremy.bennett@embecosm.com>
* or1ksim.tests/fp.exp: Removed timeout change
* or1ksim.tests/lws-test.exp: Created.
* or1ksim/test/Makefile.am: Added lws-test & config.
* or1ksim/test/Makefile.in: Regenerated.
2010-06-02 Jeremy Bennett <jeremy.bennett@embecosm.com>
* lib/or1ksim.exp: Use same matching as libsim.exp, treat each
match as a pass.
* or1ksim/test/basic.exp: Unreported test entries marked.
* or1ksim/test/cache.exp: Unreported test entries marked.
* or1ksim/test/cbasic.exp: Unreported test entries marked.
* or1ksim/test/cfg.exp: Unreported test entries marked.
* or1ksim/test/dhry.exp: Unreported test entries marked.
* or1ksim/test/dmatest.exp: Unreported test entries marked.
* or1ksim/test/eth.exp: Unreported test entries marked.
* or1ksim/test/except-test.exp: Unreported test entries marked.
* or1ksim/test/exit.exp: Unreported test entries marked.
* or1ksim/test/ext.exp: Unreported test entries marked.
* or1ksim/test/fbtest.exp: Unreported test entries marked.
* or1ksim.tests/fp.cfg: Created.
* or1ksim.tests/fp.exp: Created.
* or1ksim/test/functest.exp: Unreported test entries marked.
* or1ksim/test/flag.exp: Unreported test entries marked.
* or1ksim/test/int-test.exp: Unreported test entries marked.
* or1ksim/test/kbdtest.exp: Unreported test entries marked.
* or1ksim/test/local-global.exp: Unreported test entries marked.
* or1ksim/test/Makefile.am: Added floating point test & config.
* or1ksim/test/Makefile.in: Regenerated.
* or1ksim/test/mem-test.exp: Unreported test entries marked.
* or1ksim/test/mmu.exp: Unreported test entries marked.
* or1ksim/test/mul.exp: Unreported test entries marked.
* or1ksim/test/mycompress.exp: Unreported test entries marked.
* or1ksim/test/tick.exp: Unreported test entries marked.
2010-05-20 Jeremy Bennett <jeremy.bennett@embecosm.com>
* lib/libsim.exp (run_libsim): Expect clause corrected to detect
all unexpected warning/errors.
* libsim.tests/jtag-go-command-read.exp
<JTAG WRITE_COMMAND module CPU1>: Missing error added.
<JTAG WRITE_COMMAND CPU0 write half words>: Missing error added.
<JTAG WRITE_COMMAND CPU0 write words>: Missing error added.
<JTAG WRITE_COMMAND CPU0 access type 3>: Missing error added.
<JTAG WRITE_COMMAND CPU0 read half words>: Missing error added.
<JTAG WRITE_COMMAND CPU0 read words>: Missing error added.
<JTAG WRITE_COMMAND CPU0 access type 7>: Missing error added.
2010-05-19 Jeremy Bennett <jeremy.bennett@embecosm.com>
* libsim.tests/Makefile.am: upcalls.exp added to distribution.
* libsim.tests/Makefile.in: Regenerated.
2010-05-18 Jeremy Bennett <jeremy.bennett@embecosm.com>
* libsim.tests/default.cfg: Disabled MC, replaced with memory block
and set CPU to take vectors at high address.
* test-code/lib-jtag/lib-jtag-full.c: Increase time quanta to 3ms to
allow time for messages.
2010-05-16 Jeremy Bennett <jeremy.bennett@embecosm.com>
* libsim.tests/Makefile.am: Added new test files to dist
* libsim.tests/Makefile: Regenerated.
* libsim.tests/jtag-go-command-read.exp: New file.
* libsim.tests/jtag-go-command-write.exp: New file.
* libsim.tests/jtag-read-command.exp: Tests updated for new interface.
* libsim.tests/jtag-read-control.exp: New file.
* libsim.tests/jtag-select-module.exp: Tests updated for new
interface. All tests related to subsequent commands moved to their own
tests.
* libsim.tests/jtag-write-command.exp: Tests updated for new interface.
* libsim.tests/jtag-write-control.exp: New file.
* test-code/lib-jtag/lib-jtag.c: Interface changed to allow use of new
JTAG library interface with bit lengths.
* test-code/lib-jtag/lib-jtag-full.c: Use new JTAG library interface
with bit lengths.
2010-05-14 Jeremy Bennett <jeremy.bennett@embecosm.com>
* libsim.tests/jtag-read-command.exp: Better test naming.
* libsim.tests/jtag-select-module.exp: Better test naming.
* libsim.tests/jtag-write-command.exp: Better test naming.
* libsim.tests/jtag-select-module.exp
<SELECT_MODULE READ_COMMAND WB>: Check for correct access type.
<SELECT_MODULE READ_COMMAND CPU0>: Check for correct access type.
<SELECT_MODULE READ_COMMAND CPU1>: Check for correct access type.
<SELECT_MODULE READ_COMMAND module 4>: Check for correct access type.
<SELECT_MODULE READ_COMMAND module 14>: Check for correct access
type.
2010-05-13 Jeremy Bennett <jeremy.bennett@embecosm.com>
* libsim.tests/default.cfg: Add memory block at top of memory.
* libsim.tests/lib-jtag-full.c: Corrected some error messages.
* libsim.tests/Makefile.am: Added new JTAG test files.
* libsim.tests/Makefile.in: Regenerated.
* libsim.tests/jtag-read-command.exp: Break out READ_COMMAND tests.
* libsim.tests/jtag-select-module.exp: Break out SELECT_MODULE tests.
* libsim.tests/jtag-write-command.exp: Break out WRITE_COMMAND tests.
* README: Updated with new tests.
* test-code/lib-jtag/lib-jtag-full.c (process_read_command):
Corrected printout of access_type.
2010-05-04 Jeremy Bennett <jeremy.bennett@embecosm.com>
* configure.ac: lib-jtag/Makefile.am added as output
* configure: Regenerated
* libsim.tests/jtag-basic.exp: Created for low level JTAG tests.
* libsim.tests/jtag-full.exp: Created for high level JTAG tests.
* libsim.tests/Makefile.am: Added jtag-basic.exp and
jtag-full.exp.
* libsim.tests/Makefile.in: Regenerated.
* test-code/lib-jtag: New directory for JTAG test code
* test-code/lib-jtag/lib-jtag.c: Created for low level tests of
JTAG functions.
* test-code/lib-jtag/lib-jtag-full.c: Created for high level tests
of JTAG functions.
* test-code/lib-jtag/Makefile.am: Created.
* test-code/lib-jtag/Makefile.am: Generated.
* test-code/Makefile.am: lib-jtag added as subdir
* test-code/Makefile.in: Regenerated.
2010-05-02 Jeremy Bennett <jeremy.bennett@embecosm.com>
* test-code/lib-upcalls/lib-upcalls.c (main): Commenting corrected.
2010-05-02 Jeremy Bennett <jeremy.bennett@embecosm.com>
* global-conf.exp: Renamed from default-global-conf.exp.
* lib/or1ksim.exp (run_or1ksim): Use $srcdir instead of
environment variable and use $objdir.
* lib/or1ksim.exp (run_libsim): Use $srcdir instead of
environment variable and use $objdir.
2010-04-30 Jeremy Bennett <jeremy.bennett@embecosm.com>
* lib/or1ksim.exp (run_or1ksim): Make timeout return UNRESOLVED
rather than FAIL.
* lib/libsim.exp (run libsim): Make timeout return UNRESOLVED
rather than FAIL.
* or1ksim.tests/fbtest.exp: Restore timeout correctly.
2010-04-28 Jeremy Bennett <jeremy.bennett@embecosm.com>
* libsim.tests/upcalls.exp: Created.
* libsim.tests/upcalls.cfg: Created.
* test-code/lib-upcalls/lib-upcalls.c: Changed to use new upcall
interface.
* test-code/lib-inttest/lib-inttest-edge.c: Created.
* test-code/lib-inttest/lib-inttest-level.c: Changed to use new
upcall interface.
2010-04-25 Jeremy Bennett <jeremy.bennett@embecosm.com>
* libsim.tests/int-level.exp: Created.
* test-code/lib-upcalls: Created.
* test-code/lib-upcalls/lib-upcalls.c: Created.
* test-code/lib-upcalls/Makefile.am: Created.
* test-code/lib-upcalls/Makefile.in: Regenerated.
function to print chars more clearly.
* or1ksim.tests/kbd.exp: Updated for new test output format.
2010-04-23 Jeremy Bennett <jeremy.bennett@embecosm.com>
* test-code/lib-inttest/lib-inttest-level.c: Created.
* Makefile.am: Updated for new tests
* Makefile.in: Regenerated.
* README: Updated for new library test results.
2010-04-22 Jeremy Bennett <jeremy.bennett@embecosm.com>
* or1ksim.tests/cbasic.exp: Errors due to buggy printf fixed.
* or1ksim.tests/mmu.exp: Errors due to buggy printf fixed.
* or1ksim.tests/mul.exp: Errors due to buggy printf fixed.
2010-04-21 Jeremy Bennett <jeremy.bennett@embecosm.com>
* test-code-or1k: Renamed from test-code.
* configure.ac, configure: Moved to test-code-or1k.
* AUTHORS, NEWS, INSTALL, COPYING: Moved to test-code-or1k.
2010-04-20 Jeremy Bennett <jeremy.bennett@embecosm.com>
* test-code/support/spr-defs.h: NOP_PRINTF definition removed.
* test-code/except-test/except-test.c (illegal_insn_test):
Generate and check a correct sequence for illegal instruction.
* test-code/except-test/except-test.c (except_priority_test):
Generate a properly illegal instruction.
2010-04-19 Jeremy Bennett <jeremy.bennett@embecosm.com>
* AUTHORS: Created to refer to parent file.
* config: Directory for board configurations.
* config/unix.exp: Created.
* configure: Regenerated.
* configure.ac: Created as sub-configuration of the main program.
* COPYING: Updated to version 3.
* default-global-conf.exp: Created.
* INSTALL: Updated to refer to parent file.
* lib: Directory for expect library code.
* lib/or1ksim.ex: Created for library code for Or1ksim tests.
* Makefile.am: Updated for DejaGNU compliance.
* Makefile.in: Regenerated.
* NEWS: Created to refer to parent file.
* or1ksim.tests: Directory for expect tests of complete SoC.
* or1ksim.tests/acv-gpio.cfg: Updated from old test directory.
* or1ksim.tests/acv-uart.cfg: Updated from old test directory.
* or1ksim.tests/basic.ex/or1ksim.tests/cache.exp: Created.
* or1ksim.tests/basic.exp: Created.
* or1ksim.tests/cbasic.exp: Created.
* or1ksim.tests/cfg.exp: Created.
* or1ksim.tests/default.cfg: Updated from old test directory
* or1ksim.tests/dhry.exp: Created.
* or1ksim.tests/dmatest.exp: Created.
* or1ksim.tests/eth0.rx: Transferred from old test directory.
* or1ksim.tests/eth.cfg: Updated from old test directory.
* or1ksim.tests/eth.exp: Created.
* or1ksim.tests/except-test.exp: Created.
* or1ksim.tests/exit.exp: Created.
* or1ksim.tests/ext.exp: Created.
* or1ksim.tests/fbtest.exp: Created.
* or1ksim.tests/flag.exp: Created.
* or1ksim.tests/functest.exp: Created.
* or1ksim.tests/int-test.exp: Created.
* or1ksim.tests/kbdtest.cfg: Updated from old test directory.
* or1ksim.tests/kbdtest.exp: Created.
* or1ksim.tests/kbdtest.rx: Transferred from old test directory.
* or1ksim.tests/local-global.exp: Created.
* or1ksim.tests/mem-test.exp: Created.
* or1ksim.tests/mmu.cfg: Updated from old test directory.
* or1ksim.tests/mmu.exp: Created.
* or1ksim.tests/mul.exp: Created.
* or1ksim.tests/mycompress.exp: Created.
* or1ksim.tests/tick.exp: Created.
* README: Updated for new structure.
* test-code: New directory for test-programs.
* test-code/acv-gpio: New directory.
* test-code/acv-gpio/acv-gpio.c: Created.
* test-code/acv-gpio/Makefile.am: Created.
* test-code/acv-gpio/Makefile.in: Regenerated.
* test-code/acv-uart: New directory.
* test-code/acv-uart/acv-uart.c: Created.
* test-code/acv-uart/Makefile.am: Created.
* test-code/acv-uart/Makefile.in: Regenerated.
* test-code/basic: New directory.
* test-code/basic/basic.S: Created.
* test-code/basic/Makefile.am: Created.
* test-code/basic/Makefile.in: Regenerated.
* test-code/board.h: Created.
* test-code/cache: New directory.
* test-code/cache/cache-asm.S: Created.
* test-code/cache/cache.c: Created.
* test-code/cache/cache.ld: Updated from old test directory.
* test-code/cache/Makefile.am: Created.
* test-code/cache/Makefile.in: Regenerated.
* test-code/cbasic: New directory.
* test-code/cbasic/cbasic.c: Created.
* test-code/cbasic/Makefile.am: Created.
* test-code/cbasic/Makefile.in: Regenerated.
* test-code/cfg: New directory.
* test-code/cfg/cfg.S: Created.
* test-code/cfg/Makefile.am: Created.
* test-code/cfg/Makefile.in: Regenerated.
* test-code/default.ld: Updated from old test directory.
* test-code/dhry: New directory.
* test-code/dhry/dhry.c: Created.
* test-code/dhry/dhry.h: Created.
* test-code/dhry/Makefile.am: Created.
* test-code/dhry/Makefile.in: Regenerated.
* test-code/dmatest: New directory.
* test-code/dmatest/dmatest.c: Created.
* test-code/dmatest/Makefile.am: Created.
* test-code/dmatest/Makefile.in: Regenerated.
* test-code/eth: New directory.
* test-code/eth/eth.c: Created.
* test-code/eth/Makefile.am: Created.
* test-code/eth/Makefile.in: Regenerated.
* test-code/except: New directory.
* test-code/except/except.S: Created.
* test-code/except/Makefile.am: Created.
* test-code/except/Makefile.in: Regenerated.
* test-code/except-mc.ld: Updated from old test directory.
* test-code/except-test: New directory.
* test-code/except-test/except-test.c: Created.
* test-code/except-test/except-test-s.S: Created.
* test-code/except-test/Makefile.am: Created.
* test-code/except-test/Makefile.in: Regenerated.
* test-code/exit: New directory.
* test-code/exit/exit.c: Created.
* test-code/exit/Makefile.am: Created.
* test-code/exit/Makefile.in: Regenerated.
* test-code/ext: New directory.
* test-code/ext/ext.S: Created.
* test-code/ext/Makefile.am: Created.
* test-code/ext/Makefile.in: Regenerated.
* test-code/fbtest: New directory.
* test-code/fbtest/fbtest.c: Created.
* test-code/fbtest/Makefile.am: Created.
* test-code/fbtest/Makefile.in: Regenerated.
* test-code/flag: New directory.
* test-code/flag/flag.S: Created.
* test-code/flag/Makefile.am: Created.
* test-code/flag/Makefile.in: Regenerated.
* test-code/functest: New directory.
* test-code/functest/functest.c: Created.
* test-code/functest/Makefile.am: Created.
* test-code/functest/Makefile.in: Regenerated.
* test-code/inst-set-test: New directory.
* test-code/inst-set-test/inst-set-test.c: Created.
* test-code/inst-set-test/Makefile.am: Created.
* test-code/inst-set-test/Makefile.in: Regenerated.
* test-code/int-test: New directory.
* test-code/int-test/int-test.ld: Updated from old test directory.
* test-code/int-test/int-test.S: Created.
* test-code/int-test/Makefile.am: Created.
* test-code/int-test/Makefile.in: Regenerated.
* test-code/kbdtest: New directory.
* test-code/kbdtest/kbdtest.c: Created.
* test-code/kbdtest/Makefile.am: Created.
* test-code/kbdtest/Makefile.in: Regenerated.
* test-code/local-global: New directory.
* test-code/local-global/local-global.c: Created.
* test-code/local-global/Makefile.am: Created.
* test-code/local-global/Makefile.in: Regenerated.
* test-code/Makefile.am: Created.
* test-code/Makefile.in: Regenerated.
* test-code/mc-async: New directory.
* test-code/mc-async/Makefile.am: Created.
* test-code/mc-async/Makefile.in: Regenerated.
* test-code/mc-async/mc-async.c: Created.
* test-code/mc-async/mc-async.h: Created.
* test-code/mc-common: New directory.
* test-code/mc-common/except-mc.S: Created.
* test-code/mc-common/Makefile.am: Created.
* test-code/mc-common/Makefile.in: Regenerated.
* test-code/mc-common/mc-common.c: Created.
* test-code/mc-common/mc-common.h: Created.
* test-code/mc-dram: New directory.
* test-code/mc-dram/Makefile.am: Created.
* test-code/mc-dram/Makefile.in: Regenerated.
* test-code/mc-dram/mc-dram.c: Created.
* test-code/mc-dram/mc-dram.h: Created.
* test-code/mc-ssram: New directory.
* test-code/mc-ssram/Makefile.am: Created.
* test-code/mc-ssram/Makefile.in: Regenerated.
* test-code/mc-ssram/mc-ssram.c: Created.
* test-code/mc-ssram/mc-ssram.h: Created.
* test-code/mc-sync: New directory.
* test-code/mc-sync/Makefile.am: Created.
* test-code/mc-sync/Makefile.in: Regenerated.
* test-code/mc-sync/mc-sync.c: Created.
* test-code/mc-sync/mc-sync.h: Created.
* test-code/mem-test: New directory.
* test-code/mem-test/Makefile.am: Created.
* test-code/mem-test/Makefile.in: Regenerated.
* test-code/mem-test/mem-test.c: Created.
* test-code/mmu: New directory.
* test-code/mmu/Makefile.am: Created.
* test-code/mmu/Makefile.in: Regenerated.
* test-code/mmu/mmu-asm.S: Created.
* test-code/mmu/mmu.c: Created.
* test-code/mul: New directory.
* test-code/mul/Makefile.am: Created.
* test-code/mul/Makefile.in: Regenerated.
* test-code/mul/mul.c: Created.
* test-code/mycompress: New directory.
* test-code/mycompress/Makefile.am: Created.
* test-code/mycompress/Makefile.in: Regenerated.
* test-code/mycompress/mycompress.c: Created.
* test-code/support: New directory.
* test-code/support/int.c: Created.
* test-code/support/int.h: Created.
* test-code/support/Makefile.am: Created.
* test-code/support/Makefile.in: Regenerated.
* test-code/support/spr-defs.h: Created.
* test-code/support/support.c: Created.
* test-code/support/support.h: Created.
* test-code/tick: New directory.
* test-code/tick/Makefile.am: Created.
* test-code/tick/Makefile.in: Regenerated.
* test-code/tick/tick.c: Created.
* test-code/uos: New directory.
* test-code/uos/except-or32.S: Created.
* test-code/uos/ipc.h: Created.
* test-code/uos/Makefile.am: Created.
* test-code/uos/Makefile.in: Regenerated.
* test-code/uos/README: Created.
* test-code/uos/task.c: Created.
* test-code/uos/tick.c: Created.
* test-code/uos/uos.c: Created.
* test-code/uos/uos.h: Created.
Go to most recent revision | Compare with Previous | Blame | View Log