URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [or1ksim/] [testsuite/] [libsim.tests/] [jtag-select-module.exp] - Rev 500
Go to most recent revision | Compare with Previous | Blame | View Log
# jtag-select-module.exp. Tests of the library JTAG module selection
# Copyright (C) 2010 Embecosm Limited
# Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>
# This file is part of OpenRISC 1000 Architectural Simulator.
# This program is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by the Free
# Software Foundation; either version 3 of the License, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
# more details.
# You should have received a copy of the GNU General Public License along
# with this program. If not, see <http:#www.gnu.org/licenses/>. */
# -----------------------------------------------------------------------------
# This code is commented throughout for use with Doxygen.
# -----------------------------------------------------------------------------
# These tests check all the module selection behavior. Behavior consequential
# on subsequent commands (WRITE_COMMAND, READ_COMMAND, GO_COMMAND_READ,
# GO_COMMAND_WRITE, READ_CONTROL and READ_CONTROL) appears in the test file
# for that command.
# NOTE. All these tests return timing information, but we ignore it, since in
# general it will not be repeatable.
# Just check if we can reset
run_libsim "JTAG SELECT_MODULE reset" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET"
# Check instruction selection. Just a partial test. Comprehensive testing of
# this is in jtag-basic.exp
run_libsim "JTAG SELECT_MODULE EXTEST instr" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x00" \
"Warning: JTAG EXTEST shifted" \
" shifted out: 0x00" \
" time taken: " \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" "0"
run_libsim "JTAG SELECT_MODULE invalid instr" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x0c" \
"ERROR: Unknown JTAG instruction 0x3 shifted" \
" shifted out: 0x0c" \
" time taken: " \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" "3"
run_libsim "JTAG SELECT_MODULE DEBUG instr" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken: " \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" "8"
# Comprehensive test of selecting all possible modules. Only Wishbone (0),
# CPU0 (1) and CPU1 (2) should work silently (although CPU1 will prompt
# warnings if subsequent GO commands are used). All other values will fail by
# setting the status field on response.
# Wishbone module select (0)
run_libsim "JTAG SELECT_MODULE SELECT_MODULE WB (0)" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken: " \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" "8" \
"SELECT_MODULE" "0"
# CPU0 module select (1)
run_libsim "JTAG SELECT_MODULE SELECT_MODULE CPU0 (1)" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken: " \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x00000000000aff51d871" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" "8" \
"SELECT_MODULE" "1"
# CPU1 module select (2)
run_libsim "JTAG SELECT_MODULE SELECT_MODULE CPU1 (2)" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken: " \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x00000000001993c98e69" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" "8" \
"SELECT_MODULE" "2"
# All remaining modules should fail
run_libsim "JTAG SELECT_MODULE SELECT_MODULE 3" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken: " \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x00000000000424d9ea79" \
" shifted out: 0x01893c98e68000000000" \
" status: 0x2" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" "8" \
"SELECT_MODULE" "3"
run_libsim "JTAG SELECT_MODULE SELECT_MODULE 4" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken: " \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000102585a565" \
" shifted out: 0x01893c98e68000000000" \
" status: 0x2" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" "8" \
"SELECT_MODULE" "4"
run_libsim "JTAG SELECT_MODULE SELECT_MODULE 5" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken: " \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x00000000000d9295c175" \
" shifted out: 0x01893c98e68000000000" \
" status: 0x2" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" "8" \
"SELECT_MODULE" "5"
run_libsim "JTAG SELECT_MODULE SELECT_MODULE 6" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken: " \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x00000000001efe0d976d" \
" shifted out: 0x01893c98e68000000000" \
" status: 0x2" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" "8" \
"SELECT_MODULE" "6"
run_libsim "JTAG SELECT_MODULE SELECT_MODULE 7" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken: " \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x000000000003491df37d" \
" shifted out: 0x01893c98e68000000000" \
" status: 0x2" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" "8" \
"SELECT_MODULE" "7"
run_libsim "JTAG SELECT_MODULE SELECT_MODULE 8" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken: " \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x000000000014fea3b0e3" \
" shifted out: 0x01893c98e68000000000" \
" status: 0x2" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" "8" \
"SELECT_MODULE" "8"
run_libsim "JTAG SELECT_MODULE SELECT_MODULE 9" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken: " \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x00000000000949b3d4f3" \
" shifted out: 0x01893c98e68000000000" \
" status: 0x2" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" "8" \
"SELECT_MODULE" "9"
run_libsim "JTAG SELECT_MODULE SELECT_MODULE 10" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken: " \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x00000000001a252b82eb" \
" shifted out: 0x01893c98e68000000000" \
" status: 0x2" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" "8" \
"SELECT_MODULE" "a"
run_libsim "JTAG SELECT_MODULE SELECT_MODULE 11" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken: " \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x000000000007923be6fb" \
" shifted out: 0x01893c98e68000000000" \
" status: 0x2" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" "8" \
"SELECT_MODULE" "b"
run_libsim "JTAG SELECT_MODULE SELECT_MODULE 12" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken: " \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000139367a9e7" \
" shifted out: 0x01893c98e68000000000" \
" status: 0x2" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" "8" \
"SELECT_MODULE" "c"
run_libsim "JTAG SELECT_MODULE SELECT_MODULE 13" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken: " \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x00000000000e2477cdf7" \
" shifted out: 0x01893c98e68000000000" \
" status: 0x2" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" "8" \
"SELECT_MODULE" "d"
run_libsim "JTAG SELECT_MODULE SELECT_MODULE 14" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken: " \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x00000000001d48ef9bef" \
" shifted out: 0x01893c98e68000000000" \
" status: 0x2" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" "8" \
"SELECT_MODULE" "e"
run_libsim "JTAG SELECT_MODULE SELECT_MODULE 15" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken: " \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x000000000000ffffffff" \
" shifted out: 0x01893c98e68000000000" \
" status: 0x2" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" "8" \
"SELECT_MODULE" "f"
Go to most recent revision | Compare with Previous | Blame | View Log