URL
https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk
Subversion Repositories openrisc_2011-10-31
[/] [openrisc/] [trunk/] [or_debug_proxy/] [src/] [usb_functions.c] - Rev 148
Go to most recent revision | Compare with Previous | Blame | View Log
/*$$HEADER*/ /******************************************************************************/ /* */ /* H E A D E R I N F O R M A T I O N */ /* */ /******************************************************************************/ // Project Name : OpenRISC Debug Proxy // File Name : usb_functions.c // Prepared By : jb // Project Start : 2008-10-01 /*$$COPYRIGHT NOTICE*/ /******************************************************************************/ /* */ /* C O P Y R I G H T N O T I C E */ /* */ /******************************************************************************/ /* This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; version 2.1 of the License, a copy of which is available from http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /*$$DESCRIPTION*/ /******************************************************************************/ /* */ /* D E S C R I P T I O N */ /* */ /******************************************************************************/ // // Code calling the FT2232 JTAG MPSSE driver functions. Does a majority of the // fiddly work when interfacing to the system via its debug module. // /*$$CHANGE HISTORY*/ /******************************************************************************/ /* */ /* C H A N G E H I S T O R Y */ /* */ /******************************************************************************/ // Date Version Description //------------------------------------------------------------------------ // 081101 First revision jb // 100408 Fixed up retries jb #include <assert.h> #include <stdio.h> #include <ctype.h> #include <string.h> #include <stdlib.h> #include <unistd.h> #include <stdarg.h> #include <sys/stat.h> #include <sys/types.h> #include <netinet/in.h> #ifdef CYGWIN_COMPILE #include <windows.h> #include "win_FTCJTAG.h" #else // We're on Linux or Mac OS X #include "WinTypes.h" // We still use things from here in this file - TODO: remove this dependency #include "FT2232cMpsseJtag.h" #endif #include "gdb.h" #include "usb_functions.h" #include "or_debug_proxy.h" #include "usb_driver_calls.h" // Global JTAG signals for reading/writing DWORD dwNumBytesReturned = 0; /* Crc of current read or written data. */ uint32_t crc_r, crc_w = 0; /* Number of retries for a command */ uint32_t retries; /* Generates new crc, sending in new bit input_bit */ uint32_t crc_calc(uint32_t crc, uint32_t input_bit) { uint32_t d = (input_bit) ? 0xfffffff : 0x0000000; uint32_t crc_32 = ((crc >> 31)&1) ? 0xfffffff : 0x0000000; crc <<= 1; return crc ^ ((d ^ crc_32) & DBG_CRC_POLY); } // Speedy bit reversing algorithms for base2 lengths // Thanks to: http://aggregate.org/MAGIC/#Bit%20Reversal uint32_t bit_reverse_swar_2(uint32_t x) { x=(((x&0xaaaaaaaa)>>1)|((x&0x55555555)<<1)); return x; } uint32_t bit_reverse_swar_4(uint32_t x) { x=(((x&0xaaaaaaaa)>>1)|((x&0x55555555)<<1)); x=(((x&0xcccccccc)>>2)|((x&0x33333333)<<2)); return x; } static inline uint32_t bit_reverse_swar_8(uint32_t x) { x=(((x&0xaaaaaaaa)>>1)|((x&0x55555555)<<1)); x=(((x&0xcccccccc)>>2)|((x&0x33333333)<<2)); x=(((x&0xf0f0f0f0)>>4)|((x&0x0f0f0f0f)<<4)); return x; } uint32_t bit_reverse_swar_16(uint32_t x) { x=(((x&0xaaaaaaaa)>>1)|((x&0x55555555)<<1)); x=(((x&0xcccccccc)>>2)|((x&0x33333333)<<2)); x=(((x&0xf0f0f0f0)>>4)|((x&0x0f0f0f0f)<<4)); x=(((x&0xff00ff00)>>8)|((x&0x00ff00ff)<<8)); return x; } uint32_t bit_reverse_swar_32(uint32_t x) { x=(((x&0xaaaaaaaa)>>1)|((x&0x55555555)<<1)); x=(((x&0xcccccccc)>>2)|((x&0x33333333)<<2)); x=(((x&0xf0f0f0f0)>>4)|((x&0x0f0f0f0f)<<4)); x=(((x&0xff00ff00)>>8)|((x&0x00ff00ff)<<8)); x=(((x&0xffff0000)>>16)|((x&0x0000ffff)<<16)); // We could be on 64-bit arch! return x; } uint32_t bit_reverse_data(uint32_t data, uint32_t length){ if (length == 2) return bit_reverse_swar_2(data); if (length == 4) return bit_reverse_swar_4(data); if (length == 8) return bit_reverse_swar_8(data); if (length == 16) return bit_reverse_swar_16(data); if (length == 32) return bit_reverse_swar_32(data); // Long and laborious way - hopefully never gets called anymore! uint32_t i,reverse=0; for (i=0;i<length;i++) reverse |= (((data>>i)&1)<<(length-1-i)); return reverse; } // Constants that are used a lot, and were 5 bits, so might as well // precalculate them to save reversing them each time. // These are from or_debug_proxy.h, so if the original values change these // should be recalculated!! const uint8_t DI_GO_5BITREVERSED = 0x00; const uint8_t DI_READ_CMD_5BITREVERSED = 0x10; const uint8_t DI_WRITE_CMD_5BITREVERSED = 0x08; const uint8_t DI_READ_CTRL_5BITREVERSED = 0x18; const uint8_t DI_WRITE_CTRL_5BITREVERSED = 0x04; void usb_dbg_test() { uint32_t npc, ppc, r1; unsigned char stalled; printf("Stalling or1k\n"); err = dbg_cpu0_write_ctrl(0, 0x01); // stall or1k err = dbg_cpu0_read_ctrl(0, &stalled); if (!(stalled & 0x1)) { printf("or1k should be stalled\n"); // check stall or1k exit(1); } uint32_t zero = 0; /* Clear Debug Reason Register (DRR) 0x3015 */ err = dbg_cpu0_write((6 << 11) + 21, &zero, 4); err = dbg_cpu0_read((0 << 11) + 16, &npc, 4); /* Read NPC */ err = dbg_cpu0_read((0 << 11) + 18, &ppc, 4); /* Read PPC */ err = dbg_cpu0_read(0x401, &r1, 4); /* Read R1 */ if (err) { printf("Jtag error %d occured; exiting.", err); FT2232_USB_JTAG_CloseDevice(); exit(1); } printf("Read npc = %.8x ppc = %.8x r1 = %.8x\n", npc, ppc, r1); /* // Memory test - attempt to read and write massive arrays char biggest_array[65000]; int i; printf("Testing 65000 byte array write\n"); printf("Filling array...\n"); for(i=0;i<65000;i++) biggest_array[i] = i; printf("Writing array\n"); err = usb_dbg_wb_write_block32(0, (uint32_t *)biggest_array, 65000); printf("err = %d\n",err); */ return; } /*---------------------------------------------------------------------------*/ /*!Write up to 32-bits to the JTAG bus via the USB device Write up to 32-bits to the JTAG bus. @param[in] stream This should store the data to be written to the bus @param[in] num_bits Number of bits to write on the JTAG bus @param[in] dwTapControllerState State to leave the JTAG TAP in when done */ /*---------------------------------------------------------------------------*/ void usb_write_stream (uint32_t stream, uint32_t num_bits, DWORD dwTapControllerState){ FTC_STATUS Status = FTC_SUCCESS; uint32_t i,num_bytes; WriteDataByteBuffer WriteDataBuffer; if ((num_bits/8)>0)num_bytes=(num_bits/8); else num_bytes=1; // First clear the buffer for the amount of data we're shifting in // Bytewise copy the stream into WriteDataBuffer, LSB first // This means if we want to send things MSb first, we need to pass them // to this function wrapped with a call to bit_reverse_data(data,length) for (i=0; i<(num_bytes)+1;i++) WriteDataBuffer[i] = ((stream >>(8*i)) & (0xff)); // Now generate the CRC for what we're sending // data should be presented MSb first (at bit0) for (i=0;i<num_bits;i++) crc_w = crc_calc(crc_w,((stream>>i)&1)); if (DEBUG_USB_DRVR_FUNCS) { printf("\nusb_write_stream: num_bytes=%d, WriteDataBuffer contents for %d bits:",num_bytes,num_bits); for (i=0;i<num_bytes+1;i++) printf("%x",WriteDataBuffer[num_bytes-i]); printf("\n"); } //Status = pFT2232cMpsseJtag->JTAG_WriteDataToExternalDevice(ftHandle, false, num_bits, // &WriteDataBuffer, num_bytes, dwTapControllerState); // Platform independant function call Status = FT2232_USB_JTAG_WriteDataToExternalDevice(false, num_bits, &WriteDataBuffer, num_bytes, dwTapControllerState); if (Status != FTC_SUCCESS) printf("Write to USB device failed: status code: %ld\n",Status); } /*---------------------------------------------------------------------------*/ /*!Read up to 32-bits off the JTAG bus via the USB device The return value of this should remain uint32_t as we're returning all the data in a signal variable. We never need more than 32-bits in a single read when using this function. @param[in] num_bits Number of bits to read off from the USB @param[in] dwTapControllerState State to leave the JTAG TAP in when done @return: The data read from the USB device */ /*---------------------------------------------------------------------------*/ uint32_t usb_read_stream(uint32_t num_bits, DWORD dwTapControllerState){ ReadDataByteBuffer ReadDataBuffer; FTC_STATUS Status = FTC_SUCCESS; uint32_t returnVal =0; uint32_t i; // Platform independant driver call Status = FT2232_USB_JTAG_ReadDataFromExternalDevice(false, num_bits, &ReadDataBuffer, &dwNumBytesReturned, dwTapControllerState); if (DEBUG_USB_DRVR_FUNCS) printf("usb_read_stream: returned Status: 0x%lx from reading %u bits, \n", Status,num_bits); if (Status == FTC_SUCCESS){ for(i=0;i<num_bits;i++){ returnVal |= ((ReadDataBuffer[i/8]>>(i%8))&0x1)<<(num_bits-1-i); } } // Generate the CRC for read for (i=0;i<num_bits;i++) crc_r = crc_calc(crc_r, ((returnVal>>(num_bits-1-i))&1)); return returnVal; } /* Sets TAP instruction register */ void usb_set_tap_ir(uint32_t ir) { WriteDataByteBuffer WriteDataBuffer; FTC_STATUS Status = FTC_SUCCESS; WriteDataBuffer[0] = ir; // Using global ftHandle, writing to TAP instruction register 4 bits, //Status = pFT2232cMpsseJtag->JTAG_WriteDataToExternalDevice(ftHandle, true, //JI_SIZE, &WriteDataBuffer, 1, RUN_TEST_IDLE_STATE); // Platform independant driver call Status = FT2232_USB_JTAG_WriteDataToExternalDevice(true, JI_SIZE, &WriteDataBuffer, 1, RUN_TEST_IDLE_STATE); if (DEBUG_USB_DRVR_FUNCS) printf("USB JTAG write of %x to instruction register returned Status: 0x%lx\n", ir, Status); current_chain = -1; } static uint32_t id_read_at_reset = 0; /* Resets JTAG, and sets DEBUG scan chain */ int usb_dbg_reset() { // uint32_t err; uint32_t id; uint32_t reinit_count=0; retry_jtag_init: if (init_usb_jtag() > 0) return DBG_ERR_CRC; // Set ID code instruction in IR usb_set_tap_ir(JI_IDCODE); // Now read out the IDCODE for the device id = usb_read_stream(32, RUN_TEST_IDLE_STATE); // if read ID was rubbish retry init - this is probably NOT the best way to do this... if ((id == 0xffffffff) | (id == 0x00000002) | (id == 0x00000000)) { // Platform independant driver call FT2232_USB_JTAG_CloseDevice(); if (reinit_count++ > 4){ printf("JTAG TAP ID read error. Unable to detect TAP controller. \nPlease ensure debugger is connected to target correctly.\n"); exit(1); } goto retry_jtag_init; } printf("JTAG ID = %08x\n", id & 0xffffffff); /* select debug scan chain and stay in it forever */ usb_set_tap_ir(JI_DEBUG); id_read_at_reset = id; // Store this to check later if there's errors current_chain = -1; return DBG_ERR_OK; } static void reset_tap(void) { uint32_t id = 0; reinit_usb_jtag(); while (id != id_read_at_reset) { usb_set_tap_ir(JI_IDCODE); id = usb_read_stream(32, RUN_TEST_IDLE_STATE); //printf("reset_tap: read ID %.8x\n",id); } //Return the chain to DEBUG mode usb_set_tap_ir(JI_DEBUG); } /* counts retries and returns zero if we should abort */ static int retry_no = 0; int retry_do() { unsigned char stalled; int tap_id_reads = 0; //printf("RETRY\n"); if (retry_no == 0) printf("Communication error. Retrying\n"); retry_no++; // Odds are if we're having a communication problem, we should // just reconnect to the processor. It's probably just been reset. /* FT2232_USB_JTAG_CloseDevice();// Close the device if (init_usb_jtag() > 0) { if (retry_no >= NUM_HARD_RETRIES) return 1; else return 0; } */ // Try a readback of the TAP ID read_tap: // Set ID code instruction in IR usb_set_tap_ir(JI_IDCODE); // Now read out the IDCODE for the device uint32_t id = usb_read_stream(32, RUN_TEST_IDLE_STATE); //Return the chain to DEBUG mode usb_set_tap_ir(JI_DEBUG); if((id&0xffffffff) != (id_read_at_reset&0xffffffff)) { if (tap_id_reads == 10) { // Pretty big problem - can't even read the ID of the TAP anymore // So return error printf("Unable to read JTAG TAP ID - read %08x, expected %08x\n", id, id_read_at_reset); return 1; } tap_id_reads++; goto read_tap; } current_chain = -1; if (retry_no == 1) sleep(1); else if ( retry_no < NUM_SOFT_RETRIES) return 0; // Just attempt again if ((retry_no >= NUM_SOFT_RETRIES) && (retry_no < NUM_SOFT_RETRIES + NUM_HARD_RETRIES) ) { // Attempt a stall of the processor and then we'll try again //usb_dbg_test(); printf("Resetting or1k\n"); err = dbg_cpu0_write_ctrl(0, 0x02); // reset or1k printf("Stalling or1k\n"); err = dbg_cpu0_write_ctrl(0, 0x01); // stall or1k err = dbg_cpu0_read_ctrl(0, &stalled); if (!(stalled & 0x1)) { printf("or1k should be stalled\n"); // check stall or1k FT2232_USB_JTAG_CloseDevice();// Close the device exit(1); } //retry_no++; return 0; } else // Unable to get the processor going again, return 1 return 1; } /* resets retry counter */ void retry_ok() { retry_no = 0; } /* Sets scan chain. */ int usb_dbg_set_chain(int chain) { uint32_t status, crc_generated, crc_read; dbg_chain = chain; try_again: if (current_chain == chain) return DBG_ERR_OK; current_chain = -1; if (DEBUG_CMDS) printf("\n"); if (DEBUG_CMDS) printf("set_chain %i\n", chain); crc_w = 0xffffffff; // reset crc write variable // CRC generated in usb_read/write_stream functions usb_write_stream((((bit_reverse_data(chain,DBGCHAIN_SIZE) & 0xf) << 1) | 1), DBGCHAIN_SIZE+1 , PAUSE_TEST_DATA_REGISTER_STATE); usb_write_stream(bit_reverse_data(crc_w, DBG_CRC_SIZE),DBG_CRC_SIZE, PAUSE_TEST_DATA_REGISTER_STATE); crc_r = 0xffffffff; // reset the crc_r variable status = (usb_read_stream(DC_STATUS_SIZE, PAUSE_TEST_DATA_REGISTER_STATE) & 0xf); crc_generated = crc_r; crc_read = usb_read_stream(DBG_CRC_SIZE, RUN_TEST_IDLE_STATE); //printf("%x %x %x\n",status, crc_generated, crc_read); /* CRCs must match, otherwise retry */ if (crc_read != crc_generated) { if (!retry_do()) goto try_again; else return DBG_ERR_CRC; } /* we should read expected status value, otherwise retry */ if (status != 0) { if (!retry_do()) goto try_again; else return status; } /* reset retry counter */ retry_ok(); current_chain = chain; return DBG_ERR_OK; } /* sends out a command with 32bit address and 16bit length, if len >= 0 */ int usb_dbg_command(uint32_t type, uint32_t adr, uint32_t len) { uint32_t i,status, crc_generated, crc_read; // JTAG driver things FTC_STATUS Status = FTC_SUCCESS; WriteDataByteBuffer WriteDataBuffer; ReadDataByteBuffer ReadDataBuffer; retries = 0; try_again: usb_dbg_set_chain(dbg_chain); if (DEBUG_CMDS) printf("\n"); if (DEBUG_CMDS) printf("comm %d %d %8x \n", type,len,adr); //Calculate CRCs first crc_w = 0xffffffff; for (i=0;i<DBGCHAIN_SIZE+1;i++) crc_w = crc_calc(crc_w, (DI_WRITE_CMD_5BITREVERSED >> i) & 1); //crc_w = crc_calc(crc_w, // ((bit_reverse_data((DI_WRITE_CMD & 0xf),DBGCHAIN_SIZE+1))>>i)&1); for (i=0;i<4;i++) crc_w = crc_calc(crc_w,((bit_reverse_data(type,4))>>i)&1); for (i=0;i<32;i++) crc_w = crc_calc(crc_w,((bit_reverse_data(adr,32))>>i)&1); assert(len > 0); for (i=0;i<16;i++) crc_w = crc_calc(crc_w,((bit_reverse_data(len-1,16))>>i)&1); // Now pack the write data buffer // 1-bit 0, 4-bits cmd, 4-bit type, 32-bit adr, 32-bit CRC // [0] //bits 0-4 WriteDataBuffer[0]=(DI_WRITE_CMD_5BITREVERSED); //bits 5-7 WriteDataBuffer[0] |= ((bit_reverse_data(type,4)&0x7)<<5); // [1] // bit 0 - last bit of type WriteDataBuffer[1] = ((bit_reverse_data(type,4)&0x08)>>3); //bits 1-7 - first 7 bits of adr WriteDataBuffer[1] |= ((bit_reverse_data(adr,32)&0x07f)<<1); //[2-4] 24 bits of adr for(i=0;i<3;i++) WriteDataBuffer[2+i] = (bit_reverse_data(adr,32)>>(7+(i*8)))&0xff; // [5] last bit of adr in bit 0, first 7 bits of len-1 follow WriteDataBuffer[5] = (bit_reverse_data(adr,32)>>31)&1; WriteDataBuffer[5] |= (bit_reverse_data(len-1,16)&0x7f)<<1; // [6] bits 7-14 of (len-1) WriteDataBuffer[6] = (bit_reverse_data(len-1,16)>>7)&0xff; // [7] - last bit of len-1 and first 7 bits of the CRC WriteDataBuffer[7] = (bit_reverse_data(len-1,16)>>15)&1; //Reverse the CRC first crc_w = bit_reverse_data(crc_w, DBG_CRC_SIZE); WriteDataBuffer[7] |= (crc_w&0x7f)<<1; //[8-10] next 24 bits (7-30) of crc_w WriteDataBuffer[8] = (crc_w>>7)&0xff; WriteDataBuffer[9] = (crc_w>>15)&0xff; WriteDataBuffer[10] = (crc_w>>23)&0xff; //[11] final bit of crc_w WriteDataBuffer[11] = (crc_w>>31)&1; // Status = pFT2232cMpsseJtag->JTAG_WriteReadDataToFromExternalDevice(gFtHandle,false,89+4+32 , &WriteDataBuffer, 16, &ReadDataBuffer, &dwNumBytesReturned, RUN_TEST_IDLE_STATE); // Platform independant driver call Status = FT2232_USB_JTAG_WriteReadDataToFromExternalDevice(false,89+4+32 , &WriteDataBuffer, 16, &ReadDataBuffer, &dwNumBytesReturned, RUN_TEST_IDLE_STATE); if (Status != FTC_SUCCESS) printf("USB write fail - code %ld\b",Status); // Now look through the read data // From bit1 of ReadDataBuffer[11] we should have our 4-bit status status = (ReadDataBuffer[11] >> 1) & 0xf; // Now extract the received CRC crc_read = 0; //first 3 bits (0-2) crc_read |= (ReadDataBuffer[11] >> 5) & 0x7; // middle 3 bytes (bits 3 to 26) for (i=0;i<3;i++) crc_read |= ((ReadDataBuffer[12+i]&0xff) << ((i*8)+3)); // last 5 bits from ReadDataBuffer[15] crc_read |= (ReadDataBuffer[15]&0x1f)<<27; // Now calculate CRC on status crc_r = 0xffffffff; for(i=0;i<DC_STATUS_SIZE;i++) crc_r = crc_calc(crc_r, (status>>i)&1); crc_generated = crc_r; // Now bit reverse status and crc_read as we unpacked them // with the MSb going to the LSb status = bit_reverse_data(status, DC_STATUS_SIZE); crc_read = bit_reverse_data(crc_read, DBG_CRC_SIZE); //printf("%x %x %x\n", status, crc_read, crc_generated); /* CRCs must match, otherwise retry */ //uint32_t tries = 0; if (crc_read != crc_generated) { retries++; if (retries < 2) { if (DEBUG_USB_DRVR_FUNCS) printf("usb_functions - usb_dbg_command - CRC fail. Going again\n"); goto try_again; } else if (retries < 8) { reset_tap(); goto try_again; } else return DBG_ERR_CRC; } /* we should read expected status value, otherwise retry */ if (status != 0) { if (retries < 2) { if (DEBUG_USB_DRVR_FUNCS) printf("usb_functions - usb_dbg_command - bad status (%d). Going again\n",status); goto try_again; } else if (retries < 8) { reset_tap(); goto try_again; } else return status; } /* reset retry counter */ retry_ok(); return DBG_ERR_OK; } /* writes a ctrl reg */ int usb_dbg_ctrl(uint32_t reset, uint32_t stall) { uint32_t i,status, crc_generated, crc_read; // JTAG driver things FTC_STATUS Status = FTC_SUCCESS; WriteDataByteBuffer WriteDataBuffer; ReadDataByteBuffer ReadDataBuffer; retries = 0; try_again: usb_dbg_set_chain(dbg_chain); if (DEBUG_CMDS) printf("\n"); if (DEBUG_CMDS) printf("ctrl\n"); if (DEBUG_CMDS) printf("reset %x stall %x\n", reset, stall); crc_w = 0xffffffff; // Try packing everyhing we want to send into one write buffer //Calculate CRCs first for (i=0;i<DBGCHAIN_SIZE+1;i++) crc_w = crc_calc(crc_w, (DI_WRITE_CTRL_5BITREVERSED>>i)&1); //crc_w = crc_calc(crc_w, // ((bit_reverse_data((DI_WRITE_CTRL & 0xf),DBGCHAIN_SIZE+1))>>i)&1); crc_w = crc_calc(crc_w,(reset&1)); crc_w = crc_calc(crc_w,(stall&1)); for (i=0;i<50;i++) crc_w = crc_calc(crc_w,0); // Now pack the write data buffer // 1-bit 0, 4-bits cmd, 52-bits CPU control register data (only first 2 matter) //bits 0-4 WriteDataBuffer[0]=(DI_WRITE_CTRL_5BITREVERSED); // bit 5 WriteDataBuffer[0] |= (reset)<<(DBGCHAIN_SIZE+1); // bit 6 WriteDataBuffer[0] |= (stall)<<(DBGCHAIN_SIZE+2); // Clear the next 48 bits for (i=1; i<16;i++) //actually clear more than just the next 50 bits WriteDataBuffer[i] = 0; //Reverse the CRC first crc_w = bit_reverse_data(crc_w, DBG_CRC_SIZE); //Now load in the CRC, but take note of fact // that bit 0 of buffer[7] is last 0 from cmd register data // fill up from WriteDataBuffer[7-11] for (i=0;i<4;i++) WriteDataBuffer[7+i] = ((crc_w<<1)>>(i*8))&0xff; //Final bit, shift in and make sure is the only thing int he buffer WriteDataBuffer[11]=0|((crc_w>>31)&1); // Platform independant driver call Status = FT2232_USB_JTAG_WriteReadDataToFromExternalDevice(false,89+4+32 , &WriteDataBuffer, 16, &ReadDataBuffer, &dwNumBytesReturned, RUN_TEST_IDLE_STATE); if (Status != FTC_SUCCESS) printf("USB write fail - code %ld\b",Status); // Now look through the read data // From bit1 of ReadDataBuffer[11] we should have our 4-bit status status = (ReadDataBuffer[11] >> 1) & 0xf; // Now extract the received CRC crc_read = 0; //first 3 bits (0-2) crc_read |= (ReadDataBuffer[11] >> 5) & 0x7; // middle 3 bytes (bits 3 to 26) for (i=0;i<3;i++) crc_read |= ((ReadDataBuffer[12+i]&0xff) << ((i*8)+3)); // last 5 bits from ReadDataBuffer[15] crc_read |= (ReadDataBuffer[15]&0x1f)<<27; // Now calculate CRC on status and crc_read crc_r = 0xffffffff; for(i=0;i<DC_STATUS_SIZE;i++) crc_r = crc_calc(crc_r, (status>>i)&1); crc_generated = crc_r; // Now bit reverse status and crc_read as we unpacked them // with the MSb going to the LSb status = bit_reverse_data(status, DC_STATUS_SIZE); crc_read = bit_reverse_data(crc_read, DBG_CRC_SIZE); /* CRCs must match, otherwise retry */ //printf("%x %x %x\n", status, crc_read, crc_generated); if (crc_read != crc_generated) { retries++; if (retries < 2) { if (DEBUG_USB_DRVR_FUNCS) printf("usb_functions - usb_dbg_ctrl - CRC fail. Going again\n"); goto try_again; } else if (retries < 8) { reset_tap(); goto try_again; } else return DBG_ERR_CRC; } /* we should read expected status value, otherwise retry */ retries = 0; if (status != 0) { if (retries < 2) { if (DEBUG_USB_DRVR_FUNCS) printf("usb_functions - usb_dbg_ctrl - bad status (%d). Going again\n",status); goto try_again; } else if (retries < 8) { reset_tap(); goto try_again; } else return status; } /* reset retry counter */ retry_ok(); return DBG_ERR_OK; } /* reads control register */ int usb_dbg_ctrl_read(uint32_t *reset, uint32_t *stall) { uint32_t i, status, crc_generated, crc_read; // JTAG driver things FTC_STATUS Status = FTC_SUCCESS; WriteDataByteBuffer WriteDataBuffer; ReadDataByteBuffer ReadDataBuffer; retries = 0; try_again: usb_dbg_set_chain(dbg_chain); if (DEBUG_CMDS) printf("\n"); if (DEBUG_CMDS) printf("ctrl_read\n"); crc_w = 0xffffffff; // Try packing everyhing we want to send into one write buffer //Calculate CRCs first for (i=0;i<DBGCHAIN_SIZE+1;i++) crc_w = crc_calc(crc_w, (DI_READ_CTRL_5BITREVERSED>>i)&1); //crc_w = crc_calc(crc_w, //((bit_reverse_data((DI_READ_CTRL & 0xf),DBGCHAIN_SIZE+1))>>i)&1); // Now pack the write data buffer // 1-bit 0, 4-bits cmd, 32-bit CRC //bits 0-4 WriteDataBuffer[0]=(DI_READ_CTRL_5BITREVERSED); // Clear the next 48 bits for (i=1; i<16;i++) //actually clear more than just the next 50 bits WriteDataBuffer[i] = 0; //Reverse the CRC first crc_w = bit_reverse_data(crc_w, DBG_CRC_SIZE); //Now load in the CRC //First 3 bits go in last 3 bits of buffer[0] WriteDataBuffer[0] |= (crc_w & 0x7)<<5; // The rest of crc_w goes in buffer[1-4] for (i=0;i<3;i++) WriteDataBuffer[1+i] = ((crc_w>>3)>>(i*8))&0xff; //Final bit of write buffer with CRC WriteDataBuffer[4] = ((crc_w>>3)>>(24))&0x1f; //Status = pFT2232cMpsseJtag->JTAG_WriteReadDataToFromExternalDevice(gFtHandle,false,5+32+52+4+32, &WriteDataBuffer, 16, &ReadDataBuffer, &dwNumBytesReturned, RUN_TEST_IDLE_STATE); // Platform independant driver call Status = FT2232_USB_JTAG_WriteReadDataToFromExternalDevice(false,5+32+52+4+32, &WriteDataBuffer, 16, &ReadDataBuffer, &dwNumBytesReturned, RUN_TEST_IDLE_STATE); if (Status != FTC_SUCCESS) printf("USB read fail - code %ld\b",Status); // Now look through the read data //0 - 1+4-bit status, 3-bits CRC //1,2,3 - CRC //4 - first 5 bits CRC, last 3, control reg bits (first 3) //5,6,7,8,9,10 - control reg data (48 bits) //11 - bit0 - control reg data, bit 1-4 status bits, bits 5-7 CRC //12, 13 14 - CRC // 15 bits 0-4 CRC // Starting from bit1 of ReadDataBuffer[11] we should have our 4-bit status status = (ReadDataBuffer[11] >> 1) & 0xf; //reset bit should be in ReadDataBuffer[4] as bit 5 *reset = (ReadDataBuffer[4] >> 5) & 1; //stalled bit should be in ReadDataBuffer[4] as bit 6 *stall = (ReadDataBuffer[4] >> 6) & 1; // Now extract the received CRC crc_read = 0; //first 3 bits (0-2) of CRC are in bits 5-7 of ReadDataBuffer[11] crc_read |= (ReadDataBuffer[11] >> 5) & 0x7; // middle 3 bytes (bits 3 to 26) for (i=0;i<3;i++) crc_read |= ((ReadDataBuffer[12+i]&0xff) << ((i*8)+3)); // last 5 bits from ReadDataBuffer[15] crc_read |= (ReadDataBuffer[15]&0x1f)<<27; if (DEBUG_CMDS) printf("reset bit %x stalled bit %x:\n", ((ReadDataBuffer[4] >> 5) & 1), ((ReadDataBuffer[4] >> 6) & 1)); // Now calculate CRC on status and crc_read crc_r = 0xffffffff; crc_r = crc_calc(crc_r, ((ReadDataBuffer[4] >> 5) & 1)); crc_r = crc_calc(crc_r, ((ReadDataBuffer[4] >> 6) & 1)); for(i=0;i<50;i++) crc_r = crc_calc(crc_r,0); for(i=0;i<DC_STATUS_SIZE;i++) crc_r = crc_calc(crc_r, (status>>i)&1); crc_generated = crc_r; // Now bit reverse status and crc_read as we unpacked them // with the MSb going to the LSb status = bit_reverse_data(status, DC_STATUS_SIZE); crc_read = bit_reverse_data(crc_read, DBG_CRC_SIZE); /* CRCs must match, otherwise retry */ //printf("%x %x %x\n", status, crc_generated, crc_read); if (crc_read != crc_generated) { retries++; if (retries < 2) { if (DEBUG_USB_DRVR_FUNCS) printf("usb_functions - usb_dbg_ctrl_read - CRC fail. Going again\n"); goto try_again; } else if (retries < 8) { reset_tap(); goto try_again; } else return DBG_ERR_CRC; } /* we should read expected status value, otherwise retry */ retries = 0; if (status != 0) { if (retries < 2) { if (DEBUG_USB_DRVR_FUNCS) printf("usb_functions - usb_dbg_ctrl_read - bad status (%d). Going again\n",status); goto try_again; } else if (retries < 8) { reset_tap(); goto try_again; } else return status; } /* reset retry counter */ retry_ok(); return DBG_ERR_OK; } /* issues a burst read/write */ int usb_dbg_go(unsigned char *data, uint16_t len, uint32_t read) { uint32_t status, crc_generated, crc_read; int i,j; uint8_t data_byte; retries = 0; // JTAG driver things FTC_STATUS Status = FTC_SUCCESS; WriteDataByteBuffer WriteDataBuffer; ReadDataByteBuffer ReadDataBuffer; try_again: usb_dbg_set_chain(dbg_chain); if (DEBUG_CMDS) printf("\n"); if (DEBUG_CMDS) printf("go len is %dbytes, read=%d (if 0, writing)\n", len, read); crc_w = 0xffffffff; // Try packing everyhing we want to send into one write buffer //Calculate CRCs first for (i=0;i<DBGCHAIN_SIZE+1;i++) crc_w = crc_calc(crc_w, (DI_GO_5BITREVERSED>>i)&1); //crc_w = crc_calc(crc_w, // ((bit_reverse_data((DI_GO & 0xf),DBGCHAIN_SIZE+1))>>i)&1); // Set first 5 bits of WriteDataBuffer up to // be the GO command and 0 first bit WriteDataBuffer[0]=DI_GO_5BITREVERSED; if (read) { // Do GO command for a read // 0 then 4-bit go command, then 32-bit CRC for the last 5 bits // Then read (len+1)*8 + 4-bit status + 32-bit CRC // Reverse crc_w crc_w = bit_reverse_data(crc_w,DBG_CRC_SIZE); // Now pack in the 32-bit CRC as we're not // writing anything else after it //First 3 bits of each byte go in last 3 bits of buffer[i], // next 5 go in buffer[i+1] for(i=0;i<4;i++){ WriteDataBuffer[i] |= ((crc_w>>(i*8))&0x07)<<5; WriteDataBuffer[i+1] = ((crc_w>>(i*8))>>3)&0x1f; } // Should have data up to WriteDataBuffer[4] bit 4 // Read data should start at ReadDataBuffer[4] bit 5 //Clear the rest of the write buffer for(i=5;i<(10+len);i++) WriteDataBuffer[i]=0; } if (!read){ // If we're writing we put in the 5 command bits, (len+1)*8 data bits, // and then the 32-bit CRC do first 3 bits, then next 5 bits in // each of the for loops iterations for(i=0;i<len;i++){ data_byte = bit_reverse_swar_8(data[i]); WriteDataBuffer[i] |= ((data_byte&0x07)<<5); WriteDataBuffer[i+1] = ((data_byte>>3)&0x1f); // Now update the CRC for(j=0;j<8;j++) crc_w = crc_calc(crc_w, (data_byte>>j)&1); } // Reverse crc_w crc_w = bit_reverse_data(crc_w,DBG_CRC_SIZE); // If we have len=4 for example, we will write to // WriteDataBuffer[4]'s first 5 bits // So now load in the 32-bit CRC from there for(i=0;i<4;i++){ WriteDataBuffer[len+i] |= ((crc_w>>(i*8))&0x07)<<5; WriteDataBuffer[len+i+1] = ((crc_w>>(i*8))>>3)&0x1f; } // Should have data up to WriteDataBuffer[4+len] bit 4 // Read data should start at ReadDataBuffer[4+len] bit 5 } //Status = pFT2232cMpsseJtag->JTAG_WriteReadDataToFromExternalDevice(gFtHandle,false,(5+(len*8)+32+36), &WriteDataBuffer, (6+len+4), &ReadDataBuffer,&dwNumBytesReturned,RUN_TEST_IDLE_STATE); Status = FT2232_USB_JTAG_WriteReadDataToFromExternalDevice(false,(5+(len*8)+32+36), &WriteDataBuffer, (6+len+4), &ReadDataBuffer,&dwNumBytesReturned,RUN_TEST_IDLE_STATE); if (Status != FTC_SUCCESS) printf("USB write fail - code %ld\n",Status); crc_r = 0xffffffff; if (read){ // Look through our data, starting from ReadDataBuffer[4] bit 5 // We receive len bytes, starting at ReadDataBuffer[4] bit 5, so // unpack like so if (DEBUG_USB_DRVR_FUNCS) printf("USB read data buffer: "); for(i=0;i<len;i++){ // get first 3 bits data[i] = (ReadDataBuffer[4+i]>>5)&0x07; // then next 5 from next ReadDataBuffer byte data[i] |= (ReadDataBuffer[4+i+1]&0x1f)<<3; // Now calculate the CRC for this byte for(j=0;j<8;j++) crc_r = crc_calc(crc_r, (data[i]>>j)&1); // Now bit reverse the byte as it was read in MSb first but // written to LSb first data[i] = bit_reverse_data(data[i],8); if (DEBUG_USB_DRVR_FUNCS) printf("%.2x",data[i]); } if (DEBUG_USB_DRVR_FUNCS) printf("\n"); // Should be up to ReadDataBuffer[4+len] bit 5 for data status = (ReadDataBuffer[4+len]>>5)&0x07; status |= (ReadDataBuffer[4+len+1]&1)<<3; // Now get out crc_read crc_read = 0; for(i=0;i<4;i++){ crc_read |= ((ReadDataBuffer[4+len+1+i]>>1)&0x7f)<<(i*8); crc_read |= ((ReadDataBuffer[4+len+1+i+1]&0x1)<<7)<<(i*8); } for(i=0;i<4;i++) crc_r = crc_calc(crc_r, (status>>i)&1); } if (!read){ // Just extract our 4-bits of status and CRC status = (ReadDataBuffer[4+len]>>5)&0x07; status |= (ReadDataBuffer[4+len+1]&1)<<3; // extract crc_read from the ReadDataBuffer crc_read = 0; for(i=0;i<4;i++){ crc_read |= ((ReadDataBuffer[4+len+1+i]>>1)&0x7f)<<(i*8); crc_read |= ((ReadDataBuffer[4+len+1+i+1]&1)<<7)<<(i*8); } // Calculate our own CRC from the status value for(i=0;i<4;i++) crc_r = crc_calc(crc_r, (status>>i)&1); } crc_generated = crc_r; // Now bit reverse status and crc_read as we unpacked them // with the MSb going to the LSb status = bit_reverse_data(status, DC_STATUS_SIZE); crc_read = bit_reverse_data(crc_read, DBG_CRC_SIZE); /* CRCs must match, otherwise retry */ //printf("%x %x %x\n", status, crc_read, crc_generated); if (crc_read != crc_generated) { retries++; if (retries < 8) { if (DEBUG_USB_DRVR_FUNCS) printf("usb_functions - usb_dbg_go - CRC fail (%d) try %d. Going again\n",status, retries); reset_tap() ; goto try_again; } else return DBG_ERR_CRC; } //if (crc_read == crc_generated) //tries = 0; /* we should read expected status value, otherwise retry */ if (status != 0) { retries++; if (retries < 8) { if (DEBUG_USB_DRVR_FUNCS) printf("usb_functions - usb_dbg_go - bad status (%d) try %d. Going again\n",status, retries); reset_tap(); goto try_again; } else return status; } retry_ok(); return DBG_ERR_OK; } /* read a word from wishbone */ int usb_dbg_wb_read8(uint32_t adr, uint8_t *data) { if ((err = usb_dbg_set_chain(DC_WISHBONE))) return err; if ((err = usb_dbg_command(DBG_WB_READ8, adr, 1))) return err; if ((err = usb_dbg_go((unsigned char*)data, 1, 1))) return err; //*data = ntohl(*data); return err; } /* read a word from wishbone */ int usb_dbg_wb_read32(uint32_t adr, uint32_t *data) { // uint32_t err; if ((err = usb_dbg_set_chain(DC_WISHBONE))) return err; if ((err = usb_dbg_command(DBG_WB_READ32, adr, 4))) return err; if ((err = usb_dbg_go((unsigned char*)data, 4, 1))) return err; //*data = ntohl(*data); return err; } /* write a byte to wishbone */ int usb_dbg_wb_write8(uint32_t adr, uint8_t data) { if ((err = usb_dbg_set_chain(DC_WISHBONE))) return err; if ((err = usb_dbg_command(DBG_WB_WRITE8, adr, 1))) return err; if ((err = usb_dbg_go((unsigned char*)&data, 1, 0))) return err; return DBG_ERR_OK; } /* write a word to wishbone */ int usb_dbg_wb_write32(uint32_t adr, uint32_t data) { if ((err = usb_dbg_set_chain(DC_WISHBONE))) return err; if ((err = usb_dbg_command(DBG_WB_WRITE32, adr, 4))) return err; if ((err = usb_dbg_go((unsigned char*)&data, 4, 0))) return err; return DBG_ERR_OK; } /* read a block from wishbone */ int usb_dbg_wb_read_block32(uint32_t adr, uint32_t *data, uint32_t len) { if ((err = usb_dbg_set_chain(DC_WISHBONE))) return err; if ((err = usb_dbg_command(DBG_WB_READ32, adr, len))) return err; if ((err = usb_dbg_go((unsigned char*)data, len, 1))) return err; return DBG_ERR_OK; } /* write a block to wishbone */ int usb_dbg_wb_write_block32(uint32_t adr, uint32_t *data, uint32_t len) { if (DEBUG_CMDS) printf("usb_functions: wb_write_block %.8x %d bytes\n",adr, len); if ((err = usb_dbg_set_chain(DC_WISHBONE))) return err; if ((err = usb_dbg_command(DBG_WB_WRITE32, adr, len))) return err; if ((err = usb_dbg_go((unsigned char*)data, len, 0))) return err; return DBG_ERR_OK; } /* read a register from cpu */ int usb_dbg_cpu0_read(uint32_t adr, uint32_t *data, uint32_t length) { if ((err = usb_dbg_set_chain(DC_CPU0))) return err; if ((err = usb_dbg_command(DBG_CPU_READ, adr, length))) return err; if ((err = usb_dbg_go((unsigned char*)data, length, 1))) return err; int i;for(i=0;i<(length/4);i++)data[i]=ntohl(data[i]); return DBG_ERR_OK; } /* write a cpu register */ int usb_dbg_cpu0_write(uint32_t adr, uint32_t *data, uint32_t length) { int i;for(i=0;i<(length/4);i++){data[i]=ntohl(data[i]);} if ((err = usb_dbg_set_chain(DC_CPU0))) return err; if ((err = usb_dbg_command(DBG_CPU_WRITE, adr, length))) return err; if ((err = usb_dbg_go((unsigned char*)data, length, 0))) return err; return DBG_ERR_OK; } /* write a cpu module register */ int usb_dbg_cpu0_write_ctrl(uint32_t adr, unsigned char data) { // no ensuring that or1k is stalled here, becuase we're call this from that function if ((err = usb_dbg_set_chain(DC_CPU0))) return err; if ((err = usb_dbg_ctrl(data >> 1, data & 0x1))) return err; return DBG_ERR_OK; } /* read a register from cpu module */ int usb_dbg_cpu0_read_ctrl(uint32_t adr, unsigned char *data) { // no ensuring that or1k is stalled here, becuase we're call this from that function uint32_t r, s; if ((err = usb_dbg_set_chain(DC_CPU0))) return err; if ((err = usb_dbg_ctrl_read(&r, &s))) return err; *data = (r << 1) | s; return DBG_ERR_OK; } /* Function to close the device handle. Is called when closing the app */ void usb_close_device_handle() { // try unstalling the processor before quitting dbg_cpu0_write_ctrl(0, 0x00); // unstall or1k FT2232_USB_JTAG_CloseDevice(); }
Go to most recent revision | Compare with Previous | Blame | View Log