URL
https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk
Subversion Repositories openrisc_2011-10-31
[/] [openrisc/] [trunk/] [orpsocv2/] [bench/] [sysc/] [include/] [Or1200MonitorSC.h] - Rev 158
Go to most recent revision | Compare with Previous | Blame | View Log
// ---------------------------------------------------------------------------- // SystemC OpenRISC 1200 Monitor: definition // Copyright (C) 2008 Embecosm Limited <info@embecosm.com> // Contributor Jeremy Bennett <jeremy.bennett@embecosm.com> // Contributor Julius Baxter <jb@orsoc.se> // This file is part of the cycle accurate model of the OpenRISC 1000 based // system-on-chip, ORPSoC, built using Verilator. // This program is free software: you can redistribute it and/or modify it // under the terms of the GNU Lesser General Public License as published by // the Free Software Foundation, either version 3 of the License, or (at your // option) any later version. // This program is distributed in the hope that it will be useful, but WITHOUT // ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or // FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public // License for more details. // You should have received a copy of the GNU Lesser General Public License // along with this program. If not, see <http://www.gnu.org/licenses/>. // ---------------------------------------------------------------------------- // $Id$ #ifndef OR1200_MONITOR_SC__H #define OR1200_MONITOR_SC__H #include <fstream> #include <ctime> #include "systemc.h" #include "OrpsocAccess.h" #include "MemoryLoad.h" //! Monitor for special l.nop instructions //! This class is based on the or1200_monitor.v of the Verilog test bench. It //! wakes up on each posedge clock to check for "special" l.nop instructions, //! which need processing. class Or1200MonitorSC : public sc_core::sc_module { public: // Constructor Or1200MonitorSC (sc_core::sc_module_name name, OrpsocAccess *_accessor, MemoryLoad *_memoryload, int argc, char *argv[]); // Method to check instructions void checkInstruction(); // Methods to setup and output state of processor to a file void displayState(); void displayStateBinary(); // Methods to generate the call and return list during execution void callLog(); // Method to calculate performance of the sim void perfSummary(); // Method to print out the command-line switches for this module's options void printSwitches(); // Method to print out the usage for each option void printUsage(); // Method to dump simulation's RAM contents at finish void memdump(); // Method used for monitoring and logging transactions on the system bus void busMonitor(); // Method to do simulator assisted printf'ing void simPrintf(uint32_t stackaddr, uint32_t regparam); // The ports sc_in<bool> clk; private: #define DEFAULT_EXEC_LOG_FILE "or1200_exec.log" #define DEFAULT_PROF_FILE "sim.profile" #define DEFAULT_MEMDUMP_FILE "vorpsoc_ram.dump" #define DEFAULT_BUS_LOG_FILE "bus_trans.log" // Special NOP instructions static const uint32_t NOP_NOP = 0x15000000; //!< Normal nop instruction static const uint32_t NOP_EXIT = 0x15000001; //!< End of simulation static const uint32_t NOP_REPORT = 0x15000002; //!< Simple report static const uint32_t NOP_PRINTF = 0x15000003; //!< Simprintf instruction static const uint32_t NOP_PUTC = 0x15000004; //!< Putc instruction static const uint32_t NOP_CNT_RESET = 0x15000005; //!< Reset statistics counters static const uint32_t NOP_CNT_RESET1 = 0x15000007; /* Reset statistics counter 1 */ static const uint32_t NOP_CNT_RESET2 = 0x15000008; /* Reset statistics counter 2 */ static const uint32_t NOP_CNT_RESET3 = 0x15000009; /* Reset statistics counter 3 */ static const uint32_t NOP_MEM_STATS_RESET = 0x15000010; //!< Reset memory statistics counters static const uint32_t NOP_CNT_RESET_DIFFERENCE = 0x15000006; //!< Reset stats counters, print // Variables for processor status output ofstream statusFile; ofstream profileFile; bool profiling_enabled; bool logging_enabled; bool logfile_name_provided; bool logging_regs; bool binary_log_format; bool exit_perf_summary_enabled; bool monitor_for_crash; int lookslikewevecrashed_count, crash_monitor_buffer_head; #define CRASH_MONITOR_BUFFER_SIZE 32 uint32_t crash_monitor_buffer[CRASH_MONITOR_BUFFER_SIZE][2]; //PC, Insn bool wait_for_stall_cmd_response; unsigned long long insn_count, insn_count_rst; unsigned long long cycle_count, cycle_count_rst; unsigned long long cycles_1, cycles_2, cycles_3; // Cycle counters for l.nop insns ofstream memdumpFile; string memdumpFileName; bool do_memdump; int memdump_start_addr, memdump_end_addr; bool bus_trans_log_enabled, bus_trans_log_name_provided, bus_trans_log_start_delay_enable; sc_time bus_trans_log_start_delay; enum busLogStates { BUS_LOG_IDLE, BUS_LOG_WAIT_FOR_ACK }; ofstream busTransLog; //! Time measurement variable - for calculating performance of the sim clock_t start; //! The accessor for the Orpsoc instance OrpsocAccess *accessor; //! The memory loading object MemoryLoad *memoryload; }; // Or1200MonitorSC () #endif // OR1200_MONITOR_SC__H
Go to most recent revision | Compare with Previous | Blame | View Log