URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [orpsocv2/] [bench/] [verilog/] [include/] [cfi_flash_CUIcommandData.h] - Rev 811
Go to most recent revision | Compare with Previous | Blame | View Log
// _/ _/_/ // _/_/ _/_/_/ // _/_/_/_/ _/_/_/ // _/_/_/_/_/ _/_/_/ ____________________________________________ // _/_/_/_/_/ _/_/_/ / / // _/_/_/_/_/ _/_/_/ / 28F256P30 / // _/_/_/_/_/ _/_/_/ / / // _/_/_/_/_/_/ _/_/_/ / 256Mbit / // _/_/_/_/_/_/ _/_/_/ / single die / // _/_/_/ _/_/_/ _/_/_/ / / // _/_/_/ _/_/_/ _/_/_/ / Verilog Behavioral Model / // _/_/_/ _/_/_/ _/_/_/ / Version 1.3 / // _/_/_/ _/_/_/ _/_/_/ / / // _/_/_/ _/_/_/_/_/_/ / Copyright (c) 2010 Numonyx B.V. / // _/_/_/ _/_/_/_/_/ /___________________________________________/ // _/_/_/ _/_/_/_/ // _/_/ _/_/_/ // // // NUMONYX // ********************** // // COMMAND USER INTERFACE // // ********************** // Read Commands `define RD_cmd 8'hFF // Read Memory Array `define RSR_cmd 8'h70 // Read Status Register `define RSIG_cmd 8'h90 // Read Electronic Signature `define RCFI_cmd 8'h98 // Read CFI // Program/Erase Commands `define PG_cmd 8'h40 // Program `define PES_cmd 8'hB0 // Program/Erase Suspend `define PER_cmd 8'hD0 // Program/Erase Resume `define BLKEE_cmd 8'h20 // Block Erase `define BLKEEconfirm_cmd 8'hD0 // Block Erase Confirm `define CLRSR_cmd 8'h50 // Clear Status Register `define PRREG_cmd 8'hC0 // Protection Register Program //verificare se va bene x OTP register program setup // Protect Commands `define BL_cmd 8'h60 // Block Lock //setup?? `define BUL_cmd 8'h60 // Block UnLock `define BLD_cmd 8'h60 // Block lock-down `define BLDconfirm_cmd 8'h2F // Block Lock-down confirm `define BLconfirm_cmd 8'h01 // Block Lock Confirm `define BULconfirm_cmd 8'hD0 // Block unLock Confirm // Additional Features Commands `define PB_cmd 8'hE8 // Program Buffer `define PBcfm_cmd 8'hD0 // Close Sequence of Program Buffer Command // Configuration Register `define SCR_cmd 8'h60 // Set Configuration Register `define SCRconfirm_cmd 8'h03 // Set Configuration Register confirm // Additional Features Commands //aggiunto `define BLNKCHK_cmd 8'hBC // Blank Check Command `define BLNKCHKconfirm_cmd 8'hD0 // Blank Check Confirm // Factory Program Commands `define BuffEnhProgram_cmd 8'h80 // Enhanced Setup Command `define BuffEnhProgramCfrm_cmd 8'hD0 // Enhanced Setup confirm `define EnhSetup_cmd 8'h80 // Enhanced Setup Command `define EnhSetup_cfrm 8'hD0 // Enhanced Setup confirm // CUI Status // Read Bus Status Operation `define ReadArray_bus 2'b00 // Read Memory Array `define ReadSignature_bus 2'b01 // Read Electronic Signature `define ReadStatusReg_bus 2'b10 // Read Status Register `define ReadCFI_bus 2'b11 // Read CFI // Program/Erase Controller Status `define Free_pes 0 // No Operation `define Program_pes 1 // Programming `define ProgramBuff_pes 7 // Programming `define BlockErase_pes 2 // Erasing Block `define ChipErase_pes 3 // Chip Erasing `define BlockEraseSuspend_pes 4 // Block Erase Suspend `define ProgramEraseSuspend_pes 5 // Program/Erase Resume `define ProgramEraseWait_pes 6 // Program/Erase Wait `define Reset_pes 10 // Reset status
Go to most recent revision | Compare with Previous | Blame | View Log