URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [orpsocv2/] [bench/] [verilog/] [include/] [cfi_flash_data.h] - Rev 856
Go to most recent revision | Compare with Previous | Blame | View Log
// _/ _/_/ // _/_/ _/_/_/ // _/_/_/_/ _/_/_/ // _/_/_/_/_/ _/_/_/ ____________________________________________ // _/_/_/_/_/ _/_/_/ / / // _/_/_/_/_/ _/_/_/ / 28F256P30 / // _/_/_/_/_/ _/_/_/ / / // _/_/_/_/_/_/ _/_/_/ / 256Mbit / // _/_/_/_/_/_/ _/_/_/ / single die / // _/_/_/ _/_/_/ _/_/_/ / / // _/_/_/ _/_/_/ _/_/_/ / Verilog Behavioral Model / // _/_/_/ _/_/_/ _/_/_/ / Version 1.3 / // _/_/_/ _/_/_/ _/_/_/ / / // _/_/_/ _/_/_/_/_/_/ / Copyright (c) 2010 Numonyx B.V. / // _/_/_/ _/_/_/_/_/ /___________________________________________/ // _/_/_/ _/_/_/_/ // _/_/ _/_/_/ // // // NUMONYX // ****** // // data.h // // ****** // ******************** // // Main Characteristics // // ******************** `define ADDRBUS_dim 24 // - Address Bus pin numbers `define DATABUS_dim 16 // - Data Bus pin numbers `define MEMORY_dim 1 << `ADDRBUS_dim // - Memory Dimension `define LAST_ADDR (`MEMORY_dim) - 1 // - Last Address // ******************** // // Address & Data range // // ******************** `define ADDRBUS_range `ADDRBUS_dim - 1 : 0 `define DATABUS_range `DATABUS_dim - 1 : 0 // ***************** // // Init Memory Files // // ***************** `define CFI_dim 9'h157 `define CFI_range `CFI_dim - 1:9'h10 // ******************* // // Protection Register // // ******************* `define REG_addrStart 16'h0 `define REG_addrEnd 16'h15 `define REGSTART_addr 9'h80 // Protection Register Start Address `define REGEND_addr 9'h109 // Protection Register End Address `define REG_dim `REGEND_addr - `REGSTART_addr + 1 `define REG_addrRange `REG_addrEnd:`REG_addrStart `define REG_addrbitStart 8'd0 `define REG_addrbitEnd 8'd8 `define REG_addrbitRange `REG_addrbitEnd:`REG_addrbitStart `define PROTECTREGLOCK_addr 9'h80 // Protection Register Lock Address `define UDNREGSTART_addr 9'h81 `define UDNREGEND_addr 9'h84 `define UDNprotect_bit 8'hFE `define UPREGSTART_addr 9'h85 `define UPREGEND_addr 9'h88 `define UPprotect_bit 8'hFD // serve ad indentificare quale bit deve essere 0 nel lock regi `define PRL_default 16'h0002 // Protection Register Lock default definito anche in def // ***************************** // // Extended User OTP // // ***************************** `define ExtREG_dim 8'h20 `define ExtREG_regiondim 8'h8 `define ExtREGSTART_regionaddr 9'h8A // Ext Protection Register Start Address `define ExtREGEND_regionaddr 9'h109 // Ext Protection Register End Address `define ExtPROTECTREGLOCK_addr 9'h89 // Ext Protection Register Lock Address `define ExtPRL_default 16'hFFFF // Protection Register Lock default // *********************** // // Voltage Characteristics // // *********************** `define Voltage_range 35:0 `define VDDmin 36'd01700 `define VDDmax 36'd02000 `define VDDQmin 36'd01700 `define VDDQmax 36'd03600 `define VPPmin 36'd00900 `define VPPmax 36'd03600 `define VPPHmin 36'd08500 `define VPPHmax 36'd09500 // ********************** // // Configuration Register // // ********************** `define ConfigurationReg_dim 16 `define ConfigReg_default 16'hF94F // ******************** // // Electronic Signature // // ******************** `define ManufacturerCode 8'h89 `define TopDeviceCode 8'h19 `define BottomDeviceCode 8'h1C `define SignAddress_dim 9 `define SignAddress_range `SignAddress_dim - 1 : 0 // ********************* // // Write Buffer constant // // ********************* `define ProgramBuffer_addrDim 9 // Program Buffer address dimension `define ProgramBuffer_addrRange `ProgramBuffer_addrDim - 1:0 `define ProgramBuffer_dim 512 // Buffer Size= 2 ^ ProgramBuffer_addrDim `define ProgramBuffer_range `ProgramBuffer_dim - 1:0 // ********************* // // Buffer Enhanced Program constant // // ********************* `define BuffEnhProgramBuffer_dim 512 `define BuffEnhProgramBuffer_range `BuffEnhProgramBuffer_dim - 1 : 0 `define BuffEnhProgramBuffer_addrDim 9 `define BuffEnhProgramBuffer_addrRange `BuffEnhProgramBuffer_addrDim - 1:0 // Warning and Error Messages `define NoError_msg 0 // No Error Found `define CmdSeq_msg 1 // Sequence Command Unknown `define SuspCmd_msg 2 // Cannot execute this command during suspend `define SuspAcc_msg 3 // Cannot access this address due to suspend `define AddrRange_msg 4 // Address out of range `define AddrTog_msg 5 // Cannot change block address during command sequence `define SuspAccWarn_msg 6 // It isn't possible access this address due to suspend `define InvVDD_msg 7 // Voltage Supply must be: VDD>VDDmin or VDD<VDDmax `define InvVPP_msg 8 // Voltage Supply must be: VDD>VDDmin or VDD<VDDmax `define BlockLock_msg 9 // Cannot complete operation when the block is locked `define ByteToggle_msg 10 // Cannot toggle BYTE_N while busy `define NoUnLock_msg 11 // Invalid UnLock Block command in Locked-Down Block `define AddrCFI_msg 12 // CFI Address out of range `define PreProg_msg 13 // Program Failure due to cell failure `define NoBusy_msg 14 // Device is not Busy `define NoSusp_msg 15 // Nothing previus suspend command `define Suspend_msg 16 // Device is Suspend mode `define UDNlock_msg 17 // Unique Device Number Register is locked `define UPlock_msg 18 // User Programmable Register is locked `define ExitPHASE_BEFP_msg 19 `define WrongEraseConfirm_msg 20 // Wrong Erase Confirm code `define SignAddrRange_msg 21 // Signature Address out of range `define CFIAddrRange_msg 22 // CFI Address out of range `define WrongBlankCheckConfirm_msg 23 // Wrong Blank Check Confirm code command `define BlankCheckFailed_msg 24 // Blank Check Failed `define ProgramPHASE_BEFP_msg 25 // End of Program or Verify Phase on Enhanced Factory Program `define BlkBuffer_msg 26 // Program Buffer cannot cross block boundary `define ExtREGLock_msg 27 // Extended User Programmable Register is locked `define LeastAddr0 28 // Significative bit [%d,0] of Start Address must be 0 `define ProtRegAddrRange_msg 29 // Protect Register Address out of range `define BuffSize_msg 30 // Buffer size is too large `define WrongBlankCheckBlock 31 // No main block // ****************** // // Valid Access Times // // ****************** `define tAccess_1 100 `define tAccess_2 110
Go to most recent revision | Compare with Previous | Blame | View Log