URL
https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk
Subversion Repositories openrisc_me
[/] [openrisc/] [trunk/] [orpsocv2/] [bench/] [verilog/] [or1200_monitor.v] - Rev 401
Go to most recent revision | Compare with Previous | Blame | View Log
////////////////////////////////////////////////////////////////////// //// //// //// or1200_monitor //// //// //// //// OR1200 processor monitor module //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2009, 2010 Authors and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// `include "timescale.v" `include "or1200_defines.v" `include "orpsoc-testbench-defines.v" `include "test-defines.v" // // Top of OR1200 inside test bench // `define OR1200_TOP orpsoc_testbench.dut.or1200_top // // Define to enable lookup file generation // //`define OR1200_MONITOR_LOOKUP // // Define to enable SPR access log file generation // //`define OR1200_MONITOR_SPRS // // Enable logging of state during execution // //`define OR1200_MONITOR_EXEC_STATE // // Enable disassembly of instructions in execution state log // //`define OR1200_MONITOR_PRINT_DISASSEMBLY // Can either individually enable things above, or usually have the scripts // running the simulation pass the PROCESSOR_MONITOR_ENABLE_LOGS define to // enable them all. `ifdef PROCESSOR_MONITOR_ENABLE_LOGS `define OR1200_MONITOR_EXEC_STATE `define OR1200_MONITOR_SPRS `define OR1200_MONITOR_LOOKUP `endif // // Top of OR1200 inside test bench // `define CPU or1200 `define CPU_cpu or1200_cpu `define CPU_rf or1200_rf `define CPU_except or1200_except `define CPU_ctrl or1200_ctrl `define CPU_sprs or1200_sprs module or1200_monitor; integer fexe; reg [23:0] ref; `ifdef OR1200_MONITOR_SPRS integer fspr; `endif integer fgeneral; `ifdef OR1200_MONITOR_LOOKUP integer flookup; `endif integer r3; integer insns; // // Initialization // initial begin ref = 0; `ifdef OR1200_MONITOR_EXEC_STATE fexe = $fopen({"../out/",`TEST_NAME_STRING,"-executed.log"}); `endif $timeformat (-9, 2, " ns", 12); `ifdef OR1200_MONITOR_SPRS fspr = $fopen({"../out/",`TEST_NAME_STRING,"-sprs.log"}); `endif fgeneral = $fopen({"../out/",`TEST_NAME_STRING,"-general.log"}); `ifdef OR1200_MONITOR_LOOKUP flookup = $fopen({"../out/",`TEST_NAME_STRING,"-lookup.log"}); `endif insns = 0; end // // Get GPR // task get_gpr; input [4:0] gpr_no; output [31:0] gpr; integer j; begin `ifdef OR1200_RFRAM_GENERIC for(j = 0; j < 32; j = j + 1) begin gpr[j] = `OR1200_TOP.`CPU_cpu.`CPU_rf.rf_a.mem[gpr_no*32+j]; end `else //gpr = `OR1200_TOP.`CPU_cpu.`CPU_rf.rf_a.mem[gpr_no]; gpr = `OR1200_TOP.`CPU_cpu.`CPU_rf.rf_a.get_gpr(gpr_no); `endif end endtask // // Write state of the OR1200 registers into a file // // Limitation: only a small subset of register file RAMs // are supported // task display_arch_state; reg [5:0] i; reg [31:0] r; integer j; begin `ifdef OR1200_MONITOR_EXEC_STATE ref = ref + 1; `ifdef OR1200_MONITOR_LOOKUP $fdisplay(flookup, "Instruction %d: %t", insns, $time); `endif $fwrite(fexe, "\nEXECUTED(%d): %h: %h", insns, `OR1200_TOP.`CPU_cpu.`CPU_except.wb_pc, `OR1200_TOP.`CPU_cpu.`CPU_ctrl.wb_insn); `ifdef OR1200_MONITOR_PRINT_DISASSEMBLY $fwrite(fexe,"\t"); // Decode the instruction, print it out or1200_print_op(`OR1200_TOP.`CPU_cpu.`CPU_ctrl.wb_insn); `endif for(i = 0; i < 32; i = i + 1) begin if (i % 4 == 0) $fdisplay(fexe); get_gpr(i, r); $fwrite(fexe, "GPR%d: %h ", i, r); end $fdisplay(fexe); r = `OR1200_TOP.`CPU_cpu.`CPU_sprs.sr; $fwrite(fexe, "SR : %h ", r); r = `OR1200_TOP.`CPU_cpu.`CPU_sprs.epcr; $fwrite(fexe, "EPCR0: %h ", r); r = `OR1200_TOP.`CPU_cpu.`CPU_sprs.eear; $fwrite(fexe, "EEAR0: %h ", r); r = `OR1200_TOP.`CPU_cpu.`CPU_sprs.esr; $fdisplay(fexe, "ESR0 : %h", r); `endif // `ifdef OR1200_MONITOR_EXEC_STATE `ifdef OR1200_DISPLAY_EXECUTED ref = ref + 1; `ifdef OR1200_MONITOR_LOOKUP $fdisplay(flookup, "Instruction %d: %t", insns, $time); `endif $fwrite(fexe, "\nEXECUTED(%d): %h: %h", insns, `OR1200_TOP.`CPU_cpu.`CPU_except.wb_pc, `OR1200_TOP.`CPU_cpu.`CPU_ctrl.wb_insn); `endif insns = insns + 1; end endtask // display_arch_state /* Keep a trace buffer of the last lot of instructions and addresses * "executed",as read from the writeback stage, and cause a $finish if we hit * an instruction that is invalid, such as all zeros. * Currently, only breaks on an all zero instruction, but should probably be * made to break for anything with an X in it too. And of course ideally this * shouldn't be needed - but is handy if someone changes something and stops * the test continuing forever. */ integer num_nul_inst; initial num_nul_inst = 0; task monitor_for_crash; `define OR1200_MONITOR_CRASH_TRACE_SIZE 32 //Trace buffer of 32 instructions reg [31:0] insn_trace [0:`OR1200_MONITOR_CRASH_TRACE_SIZE-1]; //Trace buffer of the addresses of those instructions reg [31:0] addr_trace [0:`OR1200_MONITOR_CRASH_TRACE_SIZE-1]; integer i; begin if (`OR1200_TOP.`CPU_cpu.`CPU_ctrl.wb_insn == 32'h00000000) num_nul_inst = num_nul_inst + 1; else num_nul_inst = 0; // Reset it if (num_nul_inst == 1000) // Sat a loop a bit too long... begin $fdisplay(fgeneral, "ERROR - no instruction at PC %h", `OR1200_TOP.`CPU_cpu.`CPU_except.wb_pc); $fdisplay(fgeneral, "Crash trace: Last %d instructions: ", `OR1200_MONITOR_CRASH_TRACE_SIZE); $fdisplay(fgeneral, "PC\t\tINSTR"); for(i=`OR1200_MONITOR_CRASH_TRACE_SIZE-1;i>=0;i=i-1) begin $fdisplay(fgeneral, "%h\t%h",addr_trace[i], insn_trace[i]); end #100 $finish; end else begin for(i=`OR1200_MONITOR_CRASH_TRACE_SIZE-1;i>0;i=i-1) begin insn_trace[i] = insn_trace[i-1]; addr_trace[i] = addr_trace[i-1]; end insn_trace[0] = `OR1200_TOP.`CPU_cpu.`CPU_ctrl.wb_insn; addr_trace[0] = `OR1200_TOP.`CPU_cpu.`CPU_except.wb_pc; end end endtask // monitor_for_crash // // Write state of the OR1200 registers into a file; version for exception // task display_arch_state_except; reg [5:0] i; reg [31:0] r; integer j; begin `ifdef OR1200_MONITOR_EXEC_STATE ref = ref + 1; `ifdef OR1200_MONITOR_LOOKUP $fdisplay(flookup, "Instruction %d: %t", insns, $time); `endif $fwrite(fexe, "\nEXECUTED(%d): %h: %h (exception)", insns, `OR1200_TOP.`CPU_cpu.`CPU_except.ex_pc, `OR1200_TOP.`CPU_cpu.`CPU_ctrl.ex_insn); for(i = 0; i < 32; i = i + 1) begin if (i % 4 == 0) $fdisplay(fexe); get_gpr(i, r); $fwrite(fexe, "GPR%d: %h ", i, r); end $fdisplay(fexe); r = `OR1200_TOP.`CPU_cpu.`CPU_sprs.sr; $fwrite(fexe, "SR : %h ", r); r = `OR1200_TOP.`CPU_cpu.`CPU_sprs.epcr; $fwrite(fexe, "EPCR0: %h ", r); r = `OR1200_TOP.`CPU_cpu.`CPU_sprs.eear; $fwrite(fexe, "EEAR0: %h ", r); r = `OR1200_TOP.`CPU_cpu.`CPU_sprs.esr; $fdisplay(fexe, "ESR0 : %h", r); insns = insns + 1; `endif // `ifdef OR1200_MONITOR_EXEC_STATE `ifdef OR1200_DISPLAY_EXECUTED ref = ref + 1; `ifdef OR1200_MONITOR_LOOKUP $fdisplay(flookup, "Instruction %d: %t", insns, $time); `endif $fwrite(fexe, "\nEXECUTED(%d): %h: %h (exception)", insns, `OR1200_TOP.`CPU_cpu.`CPU_except.ex_pc, `OR1200_TOP.`CPU_cpu.`CPU_ctrl.ex_insn); insns = insns + 1; `endif end endtask integer iwb_progress; reg [31:0] iwb_progress_addr; // // WISHBONE bus checker // always @(posedge `OR1200_TOP.iwb_clk_i) if (`OR1200_TOP.iwb_rst_i) begin iwb_progress = 0; iwb_progress_addr = `OR1200_TOP.iwb_adr_o; end else begin if (`OR1200_TOP.iwb_cyc_o && (iwb_progress != 2)) begin iwb_progress = 1; end if (`OR1200_TOP.iwb_stb_o) begin if (iwb_progress >= 1) begin if (iwb_progress == 1) iwb_progress_addr = `OR1200_TOP.iwb_adr_o; iwb_progress = 2; end else begin $fdisplay(fgeneral, "WISHBONE protocol violation: `OR1200_TOP.iwb_stb_o raised without `OR1200_TOP.iwb_cyc_o, at %t\n", $time); #100 $finish; end end if (`OR1200_TOP.iwb_ack_i & `OR1200_TOP.iwb_err_i) begin $fdisplay(fgeneral, "WISHBONE protocol violation: `OR1200_TOP.iwb_ack_i and `OR1200_TOP.iwb_err_i raised at the same time, at %t\n", $time); end if ((iwb_progress == 2) && (iwb_progress_addr != `OR1200_TOP.iwb_adr_o)) begin $fdisplay(fgeneral, "WISHBONE protocol violation: `OR1200_TOP.iwb_adr_o changed while waiting for `OR1200_TOP.iwb_err_i/`OR1200_TOP.iwb_ack_i, at %t\n", $time); #100 $finish; end if (`OR1200_TOP.iwb_ack_i | `OR1200_TOP.iwb_err_i) if (iwb_progress == 2) begin iwb_progress = 0; iwb_progress_addr = `OR1200_TOP.iwb_adr_o; end else begin $fdisplay(fgeneral, "WISHBONE protocol violation: `OR1200_TOP.iwb_ack_i/`OR1200_TOP.iwb_err_i raised without `OR1200_TOP.iwb_cyc_i/`OR1200_TOP.iwb_stb_i, at %t\n", $time); #100 $finish; end if ((iwb_progress == 2) && !`OR1200_TOP.iwb_stb_o) begin $fdisplay(fgeneral, "WISHBONE protocol violation: `OR1200_TOP.iwb_stb_o lowered without `OR1200_TOP.iwb_err_i/`OR1200_TOP.iwb_ack_i, at %t\n", $time); #100 $finish; end end integer dwb_progress; reg [31:0] dwb_progress_addr; // // WISHBONE bus checker // always @(posedge `OR1200_TOP.dwb_clk_i) if (`OR1200_TOP.dwb_rst_i) dwb_progress = 0; else begin if (`OR1200_TOP.dwb_cyc_o && (dwb_progress != 2)) dwb_progress = 1; if (`OR1200_TOP.dwb_stb_o) if (dwb_progress >= 1) begin if (dwb_progress == 1) dwb_progress_addr = `OR1200_TOP.dwb_adr_o; dwb_progress = 2; end else begin $fdisplay(fgeneral, "WISHBONE protocol violation: `OR1200_TOP.dwb_stb_o raised without `OR1200_TOP.dwb_cyc_o, at %t\n", $time); #100 $finish; end if (`OR1200_TOP.dwb_ack_i & `OR1200_TOP.dwb_err_i) begin $fdisplay(fgeneral, "WISHBONE protocol violation: `OR1200_TOP.dwb_ack_i and `OR1200_TOP.dwb_err_i raised at the same time, at %t\n", $time); end if ((dwb_progress == 2) && (dwb_progress_addr != `OR1200_TOP.dwb_adr_o)) begin $fdisplay(fgeneral, "WISHBONE protocol violation: `OR1200_TOP.dwb_adr_o changed while waiting for `OR1200_TOP.dwb_err_i/`OR1200_TOP.dwb_ack_i, at %t\n", $time); #100 $finish; end if (`OR1200_TOP.dwb_ack_i | `OR1200_TOP.dwb_err_i) if (dwb_progress == 2) begin dwb_progress = 0; dwb_progress_addr = `OR1200_TOP.dwb_adr_o; end else begin $fdisplay(fgeneral, "WISHBONE protocol violation: `OR1200_TOP.dwb_ack_i/`OR1200_TOP.dwb_err_i raised without `OR1200_TOP.dwb_cyc_i/`OR1200_TOP.dwb_stb_i, at %t\n", $time); #100 $finish; end if ((dwb_progress == 2) && !`OR1200_TOP.dwb_stb_o) begin $fdisplay(fgeneral, "WISHBONE protocol violation: `OR1200_TOP.dwb_stb_o lowered without `OR1200_TOP.dwb_err_i/`OR1200_TOP.dwb_ack_i, at %t\n", $time); #100 $finish; end end // // Hooks for: // - displaying registers // - end of simulation // - access to SPRs // always @(posedge `OR1200_TOP.`CPU_cpu.`CPU_ctrl.clk) if (!`OR1200_TOP.`CPU_cpu.`CPU_ctrl.wb_freeze) begin // #2; if (((`OR1200_TOP.`CPU_cpu.`CPU_ctrl.wb_insn[31:26] != `OR1200_OR32_NOP) | !`OR1200_TOP.`CPU_cpu.`CPU_ctrl.wb_insn[16]) & !(`OR1200_TOP.`CPU_cpu.`CPU_except.except_flushpipe & `OR1200_TOP.`CPU_cpu.`CPU_except.ex_dslot)) begin display_arch_state; monitor_for_crash; end else if (`OR1200_TOP.`CPU_cpu.`CPU_except.except_flushpipe) display_arch_state_except; // small hack to stop simulation (l.nop 1): if (`OR1200_TOP.`CPU_cpu.`CPU_ctrl.wb_insn == 32'h1500_0001) begin get_gpr(3, r3); $fdisplay(fgeneral, "%t: l.nop exit (%h)", $time, r3); $finish; end // debug if test (l.nop 10) if (`OR1200_TOP.`CPU_cpu.`CPU_ctrl.wb_insn == 32'h1500_000a) begin $fdisplay(fgeneral, "%t: l.nop dbg_if_test", $time); end // simulation reports (l.nop 2) if (`OR1200_TOP.`CPU_cpu.`CPU_ctrl.wb_insn == 32'h1500_0002) begin get_gpr(3, r3); $fdisplay(fgeneral, "%t: l.nop report (%h)", $time, r3); end // simulation printfs (l.nop 3) if (`OR1200_TOP.`CPU_cpu.`CPU_ctrl.wb_insn == 32'h1500_0003) begin get_gpr(3, r3); $fdisplay(fgeneral, "%t: l.nop printf (%h)", $time, r3); end if (`OR1200_TOP.`CPU_cpu.`CPU_ctrl.wb_insn == 32'h1500_0004) begin // simulation putc (l.nop 4) get_gpr(3, r3); $write("%c", r3); $fdisplay(fgeneral, "%t: l.nop putc (%c)", $time, r3); end `ifdef OR1200_MONITOR_SPRS if (`OR1200_TOP.`CPU_cpu.`CPU_sprs.spr_we) $fdisplay(fspr, "%t: Write to SPR : [%h] <- %h", $time, `OR1200_TOP.`CPU_cpu.`CPU_sprs.spr_addr, `OR1200_TOP.`CPU_cpu.`CPU_sprs.spr_dat_o); if ((|`OR1200_TOP.`CPU_cpu.`CPU_sprs.spr_cs) & !`OR1200_TOP.`CPU_cpu.`CPU_sprs.spr_we) $fdisplay(fspr, "%t: Read from SPR: [%h] -> %h", $time, `OR1200_TOP.`CPU_cpu.`CPU_sprs.spr_addr, `OR1200_TOP.`CPU_cpu.`CPU_sprs.to_wbmux); `endif end `ifdef VERSATILE_SDRAM `define SDRAM_TOP design_testbench.sdram0 // Bit selects to define the bank // 32 MB part with 4 banks `define SDRAM_BANK_SEL_BITS 24:23 `define SDRAM_WORD_SEL_TOP_BIT 22 // Gets instruction word from correct bank task get_insn_from_sdram; input [31:0] addr; output [31:0] insn; reg [`SDRAM_WORD_SEL_TOP_BIT-1:0] word_addr; begin word_addr = addr[`SDRAM_WORD_SEL_TOP_BIT:2]; if (addr[`SDRAM_BANK_SEL_BITS] == 2'b00) begin //$display("%t: get_insn_from_sdram bank0, word 0x%h, (%h and %h in SDRAM)", $time, word_addr, `SDRAM_TOP.Bank0[{word_addr,1'b0}], `SDRAM_TOP.Bank0[{word_addr,1'b1}]); insn[15:0] = `SDRAM_TOP.Bank0[{word_addr,1'b1}]; insn[31:16] = `SDRAM_TOP.Bank0[{word_addr,1'b0}]; end end endtask // get_insn_from_sdram `endif // `ifdef VERSATILE_SDRAM `ifdef XILINX_DDR2 `define DDR2_TOP design_testbench.gen_cs[0] // Gets instruction word from correct bank task get_insn_from_xilinx_ddr2; input [31:0] addr; output [31:0] insn; reg [16*8-1:0] ddr2_array_line0,ddr2_array_line1,ddr2_array_line2,ddr2_array_line3; integer word_in_line_num; begin // Get our 4 128-bit chunks (8 half-words in each!! Confused yet?), 16 words total `DDR2_TOP.gen[0].u_mem0.memory_read(addr[28:27],addr[26:13],{addr[12:6],3'd0},ddr2_array_line0); `DDR2_TOP.gen[1].u_mem0.memory_read(addr[28:27],addr[26:13],{addr[12:6],3'd0},ddr2_array_line1); `DDR2_TOP.gen[2].u_mem0.memory_read(addr[28:27],addr[26:13],{addr[12:6],3'd0},ddr2_array_line2); `DDR2_TOP.gen[3].u_mem0.memory_read(addr[28:27],addr[26:13],{addr[12:6],3'd0},ddr2_array_line3); case (addr[5:2]) 4'h0: begin insn[15:0] = ddr2_array_line0[15:0]; insn[31:16] = ddr2_array_line1[15:0]; end 4'h1: begin insn[15:0] = ddr2_array_line2[15:0]; insn[31:16] = ddr2_array_line3[15:0]; end 4'h2: begin insn[15:0] = ddr2_array_line0[31:16]; insn[31:16] = ddr2_array_line1[31:16]; end 4'h3: begin insn[15:0] = ddr2_array_line2[31:16]; insn[31:16] = ddr2_array_line3[31:16]; end 4'h4: begin insn[15:0] = ddr2_array_line0[47:32]; insn[31:16] = ddr2_array_line1[47:32]; end 4'h5: begin insn[15:0] = ddr2_array_line2[47:32]; insn[31:16] = ddr2_array_line3[47:32]; end 4'h6: begin insn[15:0] = ddr2_array_line0[63:48]; insn[31:16] = ddr2_array_line1[63:48]; end 4'h7: begin insn[15:0] = ddr2_array_line2[63:48]; insn[31:16] = ddr2_array_line3[63:48]; end 4'h8: begin insn[15:0] = ddr2_array_line0[79:64]; insn[31:16] = ddr2_array_line1[79:64]; end 4'h9: begin insn[15:0] = ddr2_array_line2[79:64]; insn[31:16] = ddr2_array_line3[79:64]; end 4'ha: begin insn[15:0] = ddr2_array_line0[95:80]; insn[31:16] = ddr2_array_line1[95:80]; end 4'hb: begin insn[15:0] = ddr2_array_line2[95:80]; insn[31:16] = ddr2_array_line3[95:80]; end 4'hc: begin insn[15:0] = ddr2_array_line0[111:96]; insn[31:16] = ddr2_array_line1[111:96]; end 4'hd: begin insn[15:0] = ddr2_array_line2[111:96]; insn[31:16] = ddr2_array_line3[111:96]; end 4'he: begin insn[15:0] = ddr2_array_line0[127:112]; insn[31:16] = ddr2_array_line1[127:112]; end 4'hf: begin insn[15:0] = ddr2_array_line2[127:112]; insn[31:16] = ddr2_array_line3[127:112]; end endcase // case (addr[5:2]) end endtask // get_insn_from_xilinx_ddr2 `endif task get_insn_from_memory; input [31:0] id_pc; output [31:0] insn; begin // do a decode of which server we should look in case (id_pc[31:28]) `ifdef VERSATILE_SDRAM 4'h0: get_insn_from_sdram(id_pc, insn); `endif `ifdef XILINX_DDR2 4'h0: get_insn_from_xilinx_ddr2(id_pc, insn); `endif 4'hf: // Flash isn't stored in a memory, it's an FSM so just skip/ignore insn = `OR1200_TOP.`CPU_cpu.`CPU_ctrl.id_insn; default: begin $fdisplay(fgeneral, "%t: Unknown memory server for address 0x%h", $time,id_pc); insn = 32'hxxxxxxxx; // Unknown server end endcase // case (id_pc[31:28]) end endtask // get_insn_from_memory reg [31:0] mem_word; reg [31:0] last_addr = 0; reg [31:0] last_mem_word; //`define TRIGGER_FOR_CHECK (`OR1200_TOP.`CPU_cpu.`CPU_ctrl.id_void === 1'b0) // Disabled: `define TRIGGER_FOR_CHECK 0 `define INSN_TO_CHECK `OR1200_TOP.`CPU_cpu.`CPU_ctrl.id_insn `define PC_TO_CHECK `OR1200_TOP.`CPU_cpu.`CPU_except.id_pc // Check instruction in decode stage is what is in the RAM always @(posedge `OR1200_TOP.`CPU_cpu.`CPU_ctrl.clk) begin if (`TRIGGER_FOR_CHECK) begin // Check if it's a new PC - will also get triggered if the // instruction has changed since we last checked it if ((`PC_TO_CHECK !== last_addr) || (last_mem_word != `INSN_TO_CHECK)) begin // Decode stage not void, check instruction // get PC get_insn_from_memory(`PC_TO_CHECK, mem_word); // Debugging output to prove it's doing something! //$display("%t: Checking instruction for address 0x%h - memory had 0x%h, CPU had 0x%h", $time, `PC_TO_CHECK, mem_word, `INSN_TO_CHECK); if (mem_word !== `INSN_TO_CHECK) begin $fdisplay(fgeneral, "%t: Instruction mismatch for address 0x%h - memory had 0x%h, CPU had 0x%h", $time, `PC_TO_CHECK, mem_word, `INSN_TO_CHECK); #20 $finish; end last_addr = `PC_TO_CHECK; last_mem_word = mem_word; end // if (`PC_TO_CHECK !== last_addr) end end // always @ (posedge `OR1200_TOP.`CPU_cpu.`CPU_ctrl.clk) ///////////////////////////////////////////////////////////////////////// // Instruction decode task ///////////////////////////////////////////////////////////////////////// `define OR32_OPCODE_POS 31:26 `define OR32_J_BR_IMM_POS 25:0 `define OR32_RD_POS 25:21 `define OR32_RA_POS 20:16 `define OR32_RB_POS 15:11 `define OR32_ALU_OP_POS 3:0 `define OR32_SHROT_OP_POS 7:6 `define OR32_SHROTI_IMM_POS 5:0 `define OR32_SF_OP 25:21 `define OR32_XSYNC_OP_POS 25:21 // Switch between outputting to execution file or STD out for instruction // decoding task. //`define PRINT_OP_WRITE $write( `define PRINT_OP_WRITE $fwrite(fexe, task or1200_print_op; input [31:0] insn; reg [5:0] opcode; reg [25:0] j_imm; reg [25:0] br_imm; reg [4:0] rD_num, rA_num, rB_num; reg [31:0] rA_val, rB_val; reg [15:0] imm_16bit; reg [10:0] imm_split16bit; reg [3:0] alu_op; reg [1:0] shrot_op; reg [5:0] shroti_imm; reg [5:0] sf_op; reg [5:0] xsync_op; begin // Instruction opcode opcode = insn[`OR32_OPCODE_POS]; // Immediates for jump or branch instructions j_imm = insn[`OR32_J_BR_IMM_POS]; br_imm = insn[`OR32_J_BR_IMM_POS]; // Register numbers (D, A and B) rD_num = insn[`OR32_RD_POS]; rA_num = insn[`OR32_RA_POS]; rB_num = insn[`OR32_RB_POS]; // Bottom 16 bits when used as immediates in various instructions imm_16bit = insn[15:0]; // Bottom 11 bits used as immediates for l.sX instructions // Split 16-bit immediate for l.mtspr/l.sX instructions imm_split16bit = {insn[25:21],insn[10:0]}; // ALU op for ALU instructions alu_op = insn[`OR32_ALU_OP_POS]; // Shift-rotate op for SHROT ALU instructions shrot_op = insn[`OR32_SHROT_OP_POS]; shroti_imm = insn[`OR32_SHROTI_IMM_POS]; // Set flag op sf_op = insn[`OR32_SF_OP]; // Xsync/syscall/trap opcode xsync_op = insn[`OR32_XSYNC_OP_POS]; case (opcode) `OR1200_OR32_J: begin `PRINT_OP_WRITE"l.j 0x%h", {j_imm,2'b00}); end `OR1200_OR32_JAL: begin `PRINT_OP_WRITE"l.jal 0x%h", {j_imm,2'b00}); end `OR1200_OR32_BNF: begin `PRINT_OP_WRITE"l.bnf 0x%h", {br_imm,2'b00}); end `OR1200_OR32_BF: begin `PRINT_OP_WRITE"l.bf 0x%h", {br_imm,2'b00}); end `OR1200_OR32_RFE: begin `PRINT_OP_WRITE"l.rfe"); end `OR1200_OR32_JR: begin `PRINT_OP_WRITE"l.jr r%0d",rB_num); end `OR1200_OR32_JALR: begin `PRINT_OP_WRITE"l.jalr r%0d",rB_num); end `OR1200_OR32_LWZ: begin `PRINT_OP_WRITE"l.lwz r%0d,0x%0h(r%0d)",rD_num,imm_16bit,rA_num); end `OR1200_OR32_LBZ: begin `PRINT_OP_WRITE"l.lbz r%0d,0x%0h(r%0d)",rD_num,imm_16bit,rA_num); end `OR1200_OR32_LBS: begin `PRINT_OP_WRITE"l.lbs r%0d,0x%0h(r%0d)",rD_num,imm_16bit,rA_num); end `OR1200_OR32_LHZ: begin `PRINT_OP_WRITE"l.lhz r%0d,0x%0h(r%0d)",rD_num,imm_16bit,rA_num); end `OR1200_OR32_LHS: begin `PRINT_OP_WRITE"l.lhs r%0d,0x%0h(r%0d)",rD_num,imm_16bit,rA_num); end `OR1200_OR32_SW: begin `PRINT_OP_WRITE"l.sw 0x%0h(r%0d),r%0d",imm_split16bit,rA_num,rB_num); end `OR1200_OR32_SB: begin `PRINT_OP_WRITE"l.sb 0x%0h(r%0d),r%0d",imm_split16bit,rA_num,rB_num); end `OR1200_OR32_SH: begin `PRINT_OP_WRITE"l.sh 0x%0h(r%0d),r%0d",imm_split16bit,rA_num,rB_num); end `OR1200_OR32_MFSPR: begin `PRINT_OP_WRITE"l.mfspr r%0d,r%0d,0x%h",rD_num,rA_num,imm_16bit,); end `OR1200_OR32_MTSPR: begin `PRINT_OP_WRITE"l.mtspr r%0d,r%0d,0x%h",rA_num,rB_num,imm_split16bit); end `OR1200_OR32_MOVHI: begin if (!insn[16]) `PRINT_OP_WRITE"l.movhi r%0d,0x%h",rD_num,imm_16bit); else `PRINT_OP_WRITE"l.macrc r%0d",rD_num); end `OR1200_OR32_ADDI: begin `PRINT_OP_WRITE"l.addi r%0d,r%0d,0x%h",rD_num,rA_num,imm_16bit); end `OR1200_OR32_ADDIC: begin `PRINT_OP_WRITE"l.addic r%0d,r%0d,0x%h",rD_num,rA_num,imm_16bit); end `OR1200_OR32_ANDI: begin `PRINT_OP_WRITE"l.andi r%0d,r%0d,0x%h",rD_num,rA_num,imm_16bit); end `OR1200_OR32_ORI: begin `PRINT_OP_WRITE"l.ori r%0d,r%0d,0x%h",rD_num,rA_num,imm_16bit); end `OR1200_OR32_XORI: begin `PRINT_OP_WRITE"l.xori r%0d,r%0d,0x%h",rD_num,rA_num,imm_16bit); end `OR1200_OR32_MULI: begin `PRINT_OP_WRITE"l.muli r%0d,r%0d,0x%h",rD_num,rA_num,imm_16bit); end `OR1200_OR32_ALU: begin case(alu_op) `OR1200_ALUOP_ADD: `PRINT_OP_WRITE"l.add "); `OR1200_ALUOP_ADDC: `PRINT_OP_WRITE"l.addc "); `OR1200_ALUOP_SUB: `PRINT_OP_WRITE"l.sub "); `OR1200_ALUOP_AND: `PRINT_OP_WRITE"l.and "); `OR1200_ALUOP_OR: `PRINT_OP_WRITE"l.or "); `OR1200_ALUOP_XOR: `PRINT_OP_WRITE"l.xor "); `OR1200_ALUOP_MUL: `PRINT_OP_WRITE"l.mul "); `OR1200_ALUOP_SHROT: begin case(shrot_op) `OR1200_SHROTOP_SLL: `PRINT_OP_WRITE"l.sll "); `OR1200_SHROTOP_SRL: `PRINT_OP_WRITE"l.srl "); `OR1200_SHROTOP_SRA: `PRINT_OP_WRITE"l.sra "); `OR1200_SHROTOP_ROR: `PRINT_OP_WRITE"l.ror "); endcase // case (shrot_op) end `OR1200_ALUOP_DIV: `PRINT_OP_WRITE"l.div "); `OR1200_ALUOP_DIVU: `PRINT_OP_WRITE"l.divu "); `OR1200_ALUOP_CMOV: `PRINT_OP_WRITE"l.cmov "); endcase // case (alu_op) `PRINT_OP_WRITE"r%0d,r%0d,r%0d",rD_num,rA_num,rB_num); end `OR1200_OR32_SH_ROTI: begin case(shrot_op) `OR1200_SHROTOP_SLL: `PRINT_OP_WRITE"l.slli "); `OR1200_SHROTOP_SRL: `PRINT_OP_WRITE"l.srli "); `OR1200_SHROTOP_SRA: `PRINT_OP_WRITE"l.srai "); `OR1200_SHROTOP_ROR: `PRINT_OP_WRITE"l.rori "); endcase // case (shrot_op) `PRINT_OP_WRITE"r%0d,r%0d,0x%h",rD_num,rA_num,shroti_imm); end `OR1200_OR32_SFXXI: begin case(sf_op[2:0]) `OR1200_COP_SFEQ: `PRINT_OP_WRITE"l.sfeqi "); `OR1200_COP_SFNE: `PRINT_OP_WRITE"l.sfnei "); `OR1200_COP_SFGT: begin if (sf_op[`OR1200_SIGNED_COMPARE]) `PRINT_OP_WRITE"l.sfgtsi "); else `PRINT_OP_WRITE"l.sfgtui "); end `OR1200_COP_SFGE: begin if (sf_op[`OR1200_SIGNED_COMPARE]) `PRINT_OP_WRITE"l.sfgesi "); else `PRINT_OP_WRITE"l.sfgeui "); end `OR1200_COP_SFLT: begin if (sf_op[`OR1200_SIGNED_COMPARE]) `PRINT_OP_WRITE"l.sfltsi "); else `PRINT_OP_WRITE"l.sfltui "); end `OR1200_COP_SFLE: begin if (sf_op[`OR1200_SIGNED_COMPARE]) `PRINT_OP_WRITE"l.sflesi "); else `PRINT_OP_WRITE"l.sfleui "); end endcase // case (sf_op[2:0]) `PRINT_OP_WRITE"r%0d,0x%h",rA_num, imm_16bit); end // case: `OR1200_OR32_SFXXI `OR1200_OR32_SFXX: begin case(sf_op[2:0]) `OR1200_COP_SFEQ: `PRINT_OP_WRITE"l.sfeq "); `OR1200_COP_SFNE: `PRINT_OP_WRITE"l.sfne "); `OR1200_COP_SFGT: begin if (sf_op[`OR1200_SIGNED_COMPARE]) `PRINT_OP_WRITE"l.sfgts "); else `PRINT_OP_WRITE"l.sfgtu "); end `OR1200_COP_SFGE: begin if (sf_op[`OR1200_SIGNED_COMPARE]) `PRINT_OP_WRITE"l.sfges "); else `PRINT_OP_WRITE"l.sfgeu "); end `OR1200_COP_SFLT: begin if (sf_op[`OR1200_SIGNED_COMPARE]) `PRINT_OP_WRITE"l.sflts "); else `PRINT_OP_WRITE"l.sfltu "); end `OR1200_COP_SFLE: begin if (sf_op[`OR1200_SIGNED_COMPARE]) `PRINT_OP_WRITE"l.sfles "); else `PRINT_OP_WRITE"l.sfleu "); end endcase // case (sf_op[2:0]) `PRINT_OP_WRITE"r%0d,r%0d",rA_num, rB_num); end `OR1200_OR32_MACI: begin `PRINT_OP_WRITE"l.maci r%0d,0x%h",rA_num,imm_16bit); end `OR1200_OR32_MACMSB: begin if(insn[3:0] == 4'h1) `PRINT_OP_WRITE"l.mac "); else if(insn[3:0] == 4'h2) `PRINT_OP_WRITE"l.msb "); `PRINT_OP_WRITE"r%0d,r%0d",rA_num,rB_num); end `OR1200_OR32_NOP: begin `PRINT_OP_WRITE"l.nop 0x%0h",imm_16bit); end `OR1200_OR32_XSYNC: begin case (xsync_op) 5'd0: `PRINT_OP_WRITE"l.sys 0x%h",imm_16bit); 5'd8: `PRINT_OP_WRITE"l.trap 0x%h",imm_16bit); 5'd16: `PRINT_OP_WRITE"l.msync"); 5'd20: `PRINT_OP_WRITE"l.psync"); 5'd24: `PRINT_OP_WRITE"l.csync"); default: begin $display("%t: Instruction with opcode 0x%h has bad specific type information: 0x%h",$time,opcode,insn); `PRINT_OP_WRITE"%t: Instruction with opcode 0x%h has has bad specific type information: 0x%h",$time,opcode,insn); end endcase // case (xsync_op) end default: begin $display("%t: Unknown opcode 0x%h",$time,opcode); `PRINT_OP_WRITE"%t: Unknown opcode 0x%h",$time,opcode); end endcase // case (opcode) end endtask // or1200_print_op endmodule
Go to most recent revision | Compare with Previous | Blame | View Log