URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [orpsocv2/] [bench/] [verilog/] [usbhostslave/] [usbhost_simlib.v] - Rev 733
Go to most recent revision | Compare with Previous | Blame | View Log
////////////////////////////////////////////////////////////////////// //// //// //// usbHost.v //// //// //// //// This file is part of the usbhostslave opencores effort. //// <http://www.opencores.org/cores//> //// //// //// //// Module Description: //// //// Top level module //// //// //// To Do: //// //// //// //// //// Author(s): //// //// - Steve Fielding, sfielding@base2designs.com //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2008 Steve Fielding and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from <http://www.opencores.org/lgpl.shtml> //// //// //// ////////////////////////////////////////////////////////////////////// // `include "timescale.v" module usbhost_simlib( // Uncapitalised name clk_i, rst_i, address_i, data_i, data_o, we_i, strobe_i, ack_o, usbClk, hostSOFSentIntOut, hostConnEventIntOut, hostResumeIntOut, hostTransDoneIntOut, USBWireDataIn, USBWireDataInTick, USBWireDataOut, USBWireDataOutTick, USBWireCtrlOut, USBFullSpeed ); parameter HOST_FIFO_DEPTH = 64; //HOST_FIFO_DEPTH = 2^HOST_ADDR_WIDTH parameter HOST_FIFO_ADDR_WIDTH = 6; input clk_i; //Wishbone bus clock. Maximum 5*usbClk=240MHz input rst_i; //Wishbone bus sync reset. Synchronous to 'clk_i'. Resets all logic input [7:0] address_i; //Wishbone bus address in input [7:0] data_i; //Wishbone bus data in output [7:0] data_o; //Wishbone bus data out input we_i; //Wishbone bus write enable in input strobe_i; //Wishbone bus strobe in output ack_o; //Wishbone bus acknowledge out input usbClk; //usb clock. 48Mhz +/-0.25% output hostSOFSentIntOut; output hostConnEventIntOut; output hostResumeIntOut; output hostTransDoneIntOut; input [1:0] USBWireDataIn; output [1:0] USBWireDataOut; output USBWireDataOutTick; output USBWireDataInTick; output USBWireCtrlOut; output USBFullSpeed; wire clk_i; wire rst_i; wire [7:0] address_i; wire [7:0] data_i; wire [7:0] data_o; wire we_i; wire strobe_i; wire ack_o; wire usbClk; wire hostSOFSentIntOut; wire hostConnEventIntOut; wire hostResumeIntOut; wire hostTransDoneIntOut; wire [1:0] USBWireDataIn; wire [1:0] USBWireDataOut; wire USBWireDataOutTick; wire USBWireDataInTick; wire USBWireCtrlOut; wire USBFullSpeed; //internal wiring wire hostControlSel; wire slaveControlSel; wire hostRxFifoSel; wire hostTxFifoSel; wire hostSlaveMuxSel; wire [7:0] dataFromHostControl; wire [7:0] dataFromSlaveControl; wire [7:0] dataFromHostRxFifo; wire [7:0] dataFromHostTxFifo; wire [7:0] dataFromHostSlaveMux; wire hostTxFifoRE; wire [7:0] hostTxFifoData; wire hostTxFifoEmpty; wire hostRxFifoWE; wire [7:0] hostRxFifoData; wire hostRxFifoFull; wire [7:0] RxCtrlOut; wire [7:0] RxDataFromSIE; wire RxDataOutWEn; wire fullSpeedBitRateFromHost; wire fullSpeedPolarityFromHost; wire SIEPortWEnFromHost; wire SIEPortTxRdy; wire [7:0] SIEPortDataInFromHost; wire [7:0] SIEPortCtrlInFromHost; wire [1:0] connectState; wire resumeDetected; wire [7:0] SIEPortDataInToSIE; wire SIEPortWEnToSIE; wire [7:0] SIEPortCtrlInToSIE; wire fullSpeedPolarityToSIE; wire fullSpeedBitRateToSIE; wire noActivityTimeOut; wire rstSyncToBusClk; wire rstSyncToUsbClk; wire noActivityTimeOutEnableToSIE; wire noActivityTimeOutEnableFromHost; assign USBFullSpeed = fullSpeedBitRateToSIE; usbHostControl_simlib u_usbHostControl( .busClk(clk_i), .rstSyncToBusClk(rstSyncToBusClk), .usbClk(usbClk), .rstSyncToUsbClk(rstSyncToUsbClk), .TxFifoRE(hostTxFifoRE), .TxFifoData(hostTxFifoData), .TxFifoEmpty(hostTxFifoEmpty), .RxFifoWE(hostRxFifoWE), .RxFifoData(hostRxFifoData), .RxFifoFull(hostRxFifoFull), .RxByteStatus(RxCtrlOut), .RxData(RxDataFromSIE), .RxDataValid(RxDataOutWEn), .SIERxTimeOut(noActivityTimeOut), .SIERxTimeOutEn(noActivityTimeOutEnableFromHost), .fullSpeedRate(fullSpeedBitRateFromHost), .fullSpeedPol(fullSpeedPolarityFromHost), .HCTxPortEn(SIEPortWEnFromHost), .HCTxPortRdy(SIEPortTxRdy), .HCTxPortData(SIEPortDataInFromHost), .HCTxPortCtrl(SIEPortCtrlInFromHost), .connectStateIn(connectState), .resumeDetectedIn(resumeDetected), .busAddress(address_i[3:0]), .busDataIn(data_i), .busDataOut(dataFromHostControl), .busWriteEn(we_i), .busStrobe_i(strobe_i), .SOFSentIntOut(hostSOFSentIntOut), .connEventIntOut(hostConnEventIntOut), .resumeIntOut(hostResumeIntOut), .transDoneIntOut(hostTransDoneIntOut), .hostControlSelect(hostControlSel) ); wishBoneBI_simlib u_wishBoneBI ( .address(address_i), .dataIn(data_i), .dataOut(data_o), .writeEn(we_i), .strobe_i(strobe_i), .ack_o(ack_o), .clk(clk_i), .rst(rstSyncToBusClk), .hostControlSel(hostControlSel), .hostRxFifoSel(hostRxFifoSel), .hostTxFifoSel(hostTxFifoSel), .slaveControlSel(), .slaveEP0RxFifoSel(), .slaveEP1RxFifoSel(), .slaveEP2RxFifoSel(), .slaveEP3RxFifoSel(), .slaveEP0TxFifoSel(), .slaveEP1TxFifoSel(), .slaveEP2TxFifoSel(), .slaveEP3TxFifoSel(), .hostSlaveMuxSel(hostSlaveMuxSel), .dataFromHostControl(dataFromHostControl), .dataFromHostRxFifo(dataFromHostRxFifo), .dataFromHostTxFifo(dataFromHostTxFifo), .dataFromSlaveControl(8'h00), .dataFromEP0RxFifo(8'h00), .dataFromEP1RxFifo(8'h00), .dataFromEP2RxFifo(8'h00), .dataFromEP3RxFifo(8'h00), .dataFromEP0TxFifo(8'h00), .dataFromEP1TxFifo(8'h00), .dataFromEP2TxFifo(8'h00), .dataFromEP3TxFifo(8'h00), .dataFromHostSlaveMux(dataFromHostSlaveMux) ); assign SIEPortCtrlInToSIE = SIEPortCtrlInFromHost; assign SIEPortDataInToSIE = SIEPortDataInFromHost; assign SIEPortWEnToSIE = SIEPortWEnFromHost; assign fullSpeedPolarityToSIE = fullSpeedPolarityFromHost; assign fullSpeedBitRateToSIE = fullSpeedBitRateFromHost; assign noActivityTimeOutEnableToSIE = noActivityTimeOutEnableFromHost; hostSlaveMuxBI_simlib u_hostSlaveMuxBI ( .dataIn(data_i), .dataOut(dataFromHostSlaveMux), .address(address_i[0]), .writeEn(we_i), .strobe_i(strobe_i), .usbClk(usbClk), .busClk(clk_i), .hostMode(hostMode), .hostSlaveMuxSel(hostSlaveMuxSel), .rstFromWire(rst_i), .rstSyncToBusClkOut(rstSyncToBusClk), .rstSyncToUsbClkOut(rstSyncToUsbClk) ); usbSerialInterfaceEngine_simlib u_usbSerialInterfaceEngine( .clk(usbClk), .rst(rstSyncToUsbClk), .USBWireDataIn(USBWireDataIn), .USBWireDataOut(USBWireDataOut), .USBWireDataInTick(USBWireDataInTick), .USBWireDataOutTick(USBWireDataOutTick), .USBWireCtrlOut(USBWireCtrlOut), .connectState(connectState), .resumeDetected(resumeDetected), .RxCtrlOut(RxCtrlOut), .RxDataOutWEn(RxDataOutWEn), .RxDataOut(RxDataFromSIE), .SIEPortCtrlIn(SIEPortCtrlInToSIE), .SIEPortDataIn(SIEPortDataInToSIE), .SIEPortTxRdy(SIEPortTxRdy), .SIEPortWEn(SIEPortWEnToSIE), .fullSpeedPolarity(fullSpeedPolarityToSIE), .fullSpeedBitRate(fullSpeedBitRateToSIE), .noActivityTimeOut(noActivityTimeOut), .noActivityTimeOutEnable(noActivityTimeOutEnableToSIE) ); //---Host fifos TxFifo_simlib #(HOST_FIFO_DEPTH, HOST_FIFO_ADDR_WIDTH) HostTxFifo ( .usbClk(usbClk), .busClk(clk_i), .rstSyncToBusClk(rstSyncToBusClk), .rstSyncToUsbClk(rstSyncToUsbClk), .fifoREn(hostTxFifoRE), .fifoEmpty(hostTxFifoEmpty), .busAddress(address_i[2:0]), .busWriteEn(we_i), .busStrobe_i(strobe_i), .busFifoSelect(hostTxFifoSel), .busDataIn(data_i), .busDataOut(dataFromHostTxFifo), .fifoDataOut(hostTxFifoData) ); RxFifo_simlib #(HOST_FIFO_DEPTH, HOST_FIFO_ADDR_WIDTH) HostRxFifo( .usbClk(usbClk), .busClk(clk_i), .rstSyncToBusClk(rstSyncToBusClk), .rstSyncToUsbClk(rstSyncToUsbClk), .fifoWEn(hostRxFifoWE), .fifoFull(hostRxFifoFull), .busAddress(address_i[2:0]), .busWriteEn(we_i), .busStrobe_i(strobe_i), .busFifoSelect(hostRxFifoSel), .busDataIn(data_i), .busDataOut(dataFromHostRxFifo), .fifoDataIn(hostRxFifoData) ); endmodule
Go to most recent revision | Compare with Previous | Blame | View Log