URL
https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk
Subversion Repositories openrisc_2011-10-31
[/] [openrisc/] [trunk/] [orpsocv2/] [bench/] [verilog/] [vpi/] [c/] [rsp-rtl_sim.h] - Rev 164
Go to most recent revision | Compare with Previous | Blame | View Log
/*$$HEADER*/ /******************************************************************************/ /* */ /* H E A D E R I N F O R M A T I O N */ /* */ /******************************************************************************/ // Project Name : ORPSoCv2 // File Name : rsp-rtl_sim.h // Prepared By : jb, jb@orsoc.se // Project Start : 2009-05-01 /*$$COPYRIGHT NOTICE*/ /******************************************************************************/ /* */ /* C O P Y R I G H T N O T I C E */ /* */ /******************************************************************************/ /* This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; version 2.1 of the License, a copy of which is available from http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ #ifndef _RSP_RTL_SIM_H_ #define _RSP_RTL_SIM_H_ #include <stdint.h> // For uint32_t types //#define DEBUG 1 //#define DEBUG2 1 #define Boolean int #define false 0 #define true 1 #ifdef DEBUG #define debug printf #else #define debug #endif #ifdef DEBUG2 #define debug2 printf #else #define debug2 #endif #define DBG_ON 0 #define DBG_JP_VPI 0 #define DBG_VPI 0 #define DBG_CALLS 0 extern uint32_t vpi_to_rsp_pipe[2]; // [0] - read, [1] - write extern uint32_t rsp_to_vpi_pipe[2]; // [0] - read, [1] - write extern uint32_t command_pipe[2]; // RSP end writes, VPI end reads ONLY #if (DEBUG) || (DEBUG2) #define flush_debug() fflush(stdout) #else #define flush_debug() #endif # define JTAG_WAIT() usleep(1000) # define JTAG_RETRY_WAIT() usleep (1000) /* Selects crc trailer size in bits. Currently supported: 8 */ #define CRC_SIZE (8) /* Scan chain size in bits. */ #define SC_SIZE (4) /* function to kick off this server */ void run_rsp_server(int); /* read a word from wishbone */ int dbg_wb_read32(uint32_t adr, uint32_t *data); /* write a word to wishbone */ int dbg_wb_write32(uint32_t adr, uint32_t data); int dbg_wb_write16(uint32_t adr, uint16_t data); int dbg_wb_write8(uint32_t adr, uint8_t data); /* read a block from wishbone */ int dbg_wb_read_block32(uint32_t adr, uint32_t *data, int len); /* write a block to wishbone */ int dbg_wb_write_block32(uint32_t adr, uint32_t *data, int len); /* read a register from cpu */ int dbg_cpu0_read(uint32_t adr, uint32_t *data, uint32_t length); /* read a register from cpu module */ int dbg_cpu0_read_ctrl(uint32_t adr, unsigned char *data); /* write a cpu register */ int dbg_cpu0_write(uint32_t adr, uint32_t *data, uint32_t length); /* write a cpu module register */ int dbg_cpu0_write_ctrl(uint32_t adr, unsigned char data); /* send a message to the sim that the debugging client has disconnected */ void dbg_client_detached(void); #define DC_SIZE 4 #define DC_STATUS_SIZE 4 #define DC_WISHBONE 0 #define DC_CPU0 1 #define DC_CPU1 2 #define DI_GO 0 #define DI_READ_CMD 1 #define DI_WRITE_CMD 2 #define DI_READ_CTRL 3 #define DI_WRITE_CTRL 4 #define DBG_CRC_SIZE 32 #define DBG_CRC_POLY 0x04c11db7 #define DBG_ERR_OK 0 #define DBG_ERR_CRC 8 #define NUM_SOFT_RETRIES 3 #define NUM_HARD_RETRIES 3 #define NUM_ACCESS_RETRIES 10 /* Possible errors are listed here. */ enum enum_errors /* modified <chris@asics.ws> CZ 24/05/01 */ { /* Codes > 0 are for system errors */ ERR_NONE = 0, ERR_CRC = -1, ERR_MEM = -2, JTAG_PROXY_INVALID_COMMAND = -3, JTAG_PROXY_SERVER_TERMINATED = -4, JTAG_PROXY_NO_CONNECTION = -5, JTAG_PROXY_PROTOCOL_ERROR = -6, JTAG_PROXY_COMMAND_NOT_IMPLEMENTED = -7, JTAG_PROXY_INVALID_CHAIN = -8, JTAG_PROXY_INVALID_ADDRESS = -9, JTAG_PROXY_ACCESS_EXCEPTION = -10, /* Write to ROM */ JTAG_PROXY_INVALID_LENGTH = -11, JTAG_PROXY_OUT_OF_MEMORY = -12, }; #endif
Go to most recent revision | Compare with Previous | Blame | View Log