URL
https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk
Subversion Repositories openrisc_me
[/] [openrisc/] [trunk/] [orpsocv2/] [bench/] [verilog/] [vpi/] [c/] [rsp-vpi.h] - Rev 307
Go to most recent revision | Compare with Previous | Blame | View Log
/*$$HEADER*/ /******************************************************************************/ /* */ /* H E A D E R I N F O R M A T I O N */ /* */ /******************************************************************************/ // Project Name : ORPSoCv2 // File Name : rsp-vpi.h // Prepared By : jb, jb@orsoc.se // Project Start : 2009-05-01 /*$$COPYRIGHT NOTICE*/ /******************************************************************************/ /* */ /* C O P Y R I G H T N O T I C E */ /* */ /******************************************************************************/ /* This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; version 2.1 of the License, a copy of which is available from http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ // Defines for protocol ensuring synchronisation with the simulation process // 1. rsp-rtl_sim will first write a command byte // 2. rsp-rtl_sim will then send the address if it's a read or write // or the data to write if it's a dbg_cpu_wr_ctrl (stall & reset bits) // 3. will then send data if we're writing and we sent address in 2 // 4. wait for response from vpi functions // commands: // 4'h1 jtag set instruction register (input: instruction value) // 4'h2 set debug chain (dbg_set_command here) (input: chain value) // 4'h3 cpu_ctrl_wr (input: ctrl value (2 bits)) // 4'h4 cpu_ctrl_rd (output: ctrl value (2bits)) // 4'h5 cpu wr reg (inputs: address, data) // 4'h6 cpu rd reg (input: address; output: data) // 4'h7 wb wr (inputs: address, data, size) // 4'h8 wb rd 32 (input: address; output: data) // 4'h9 wb wr block 32 (inputs: address, length, data) // 4'ha wb rd block 32 (inputs: address, length; output: data) // 4'hb reset // 4'hc read jtag id (output: data) // 4'hd GDB detach - do something (like close down, restart, etc.) // There should be a correlating set of verilog `define's in the // verilog debug testbench module's include file, test_defines.v #define CMD_JTAG_SET_IR 0x1 #define CMD_SET_DEBUG_CHAIN 0x2 #define CMD_CPU_CTRL_WR 0x3 #define CMD_CPU_CTRL_RD 0x4 #define CMD_CPU_WR_REG 0x5 #define CMD_CPU_RD_REG 0x6 #define CMD_WB_WR 0x7 #define CMD_WB_RD32 0x8 #define CMD_WB_BLOCK_WR32 0x9 #define CMD_WB_BLOCK_RD32 0xa #define CMD_RESET 0xb #define CMD_READ_JTAG_ID 0xc #define CMD_GDB_DETACH 0xd
Go to most recent revision | Compare with Previous | Blame | View Log