URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [orpsocv2/] [bench/] [verilog/] [vpi/] [verilog/] [vpi_debug_module.v] - Rev 856
Go to most recent revision | Compare with Previous | Blame | View Log
////////////////////////////////////////////////////////////////////// //// //// //// ORPSoC Testbench //// //// //// //// Description //// //// ORPSoC VPI Debugging Testbench file //// //// //// //// To Do: //// //// //// //// //// //// Author(s): //// //// - jb, jb@orsoc.se //// //// //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2009 Authors and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// `timescale 1ns/10ps `include "vpi_debug_defines.v" // uncomment the following line to get more debug output for this module //`define DEBUG_INFO //`define VPI_DEBUG_INFO module vpi_debug_module(tms, tck, tdi, tdo); output tms; output tck; output tdi; input tdo; reg tms; reg tck; reg tdi; reg [31:0] in_data_le, in_data_be; reg [31:0] incoming_word; reg err; integer i; reg [31:0] id; reg [31:0] npc; reg [31:0] ppc; reg [31:0] r1; reg [31:0] insn; reg [31:0] result; reg [31:0] tmp; reg [31:0] crc_out; reg [31:0] crc_in; wire crc_match_in; reg [`DBG_TOP_STATUS_LEN -1:0] status; reg [`DBG_WB_STATUS_LEN -1:0] status_wb; reg [`DBG_CPU_STATUS_LEN -1:0] status_cpu; // Text used for easier debugging reg [199:0] test_text; reg [`DBG_WB_CMD_LEN -1:0] last_wb_cmd; reg [`DBG_CPU_CMD_LEN -1:0] last_cpu_cmd; reg [199:0] last_wb_cmd_text; reg [199:0] last_cpu_cmd_text; reg [31:0] data_storage [0:4095]; // Data storage (for write and read operations). reg [18:0] length_global; parameter Tp = 1; //parameter Tck = 25; // Clock half period (Clok period = 50 ns => 20 MHz) parameter Tck = 50; // Clock half period (Clok period = 100 ns => 10 MHz) integer cmd; integer block_cmd_length; integer jtag_instn_val; integer set_chain_val; reg [1:0] cpu_ctrl_val; // two important bits for the ctrl reg reg [31:0] cmd_adr; reg [31:0] cmd_size; reg [31:0] cmd_data; initial begin $display("JTAG debug module with VPI interface enabled\n"); tck <=#Tp 1'b0; tdi <=#Tp 1'bz; tms <=#Tp 1'b0; // Insert a #delay here because we need to // wait until the PC isn't pointing to flash anymore // (this is around 20k ns if the flash_crash boot code // is being booted from, else much bigger, around 10mil ns) #2_000 main; end task main; begin id <=#Tp 32'h00; npc <=#Tp 32'h00; ppc <=#Tp 32'h00; insn <=#Tp 32'h00; result <=#Tp 32'h00; err <=#Tp 1'b0; tmp <=#Tp 32'h00; // execute some cycles #50000; reset_tap; goto_run_test_idle; //$init_rsp_server(); while (1) begin // Check for incoming command // wait until a command is sent // poll with a delay here cmd = -1; while (cmd == -1) begin #1000 $check_for_command(cmd); end // now switch on the command case (cmd) `CMD_RESET : // reset begin // call reset task reset_tap; // and put TAP into run_test_idle state goto_run_test_idle; end `CMD_JTAG_SET_IR : // set jtag instruction register begin $get_command_data(jtag_instn_val); set_instruction(jtag_instn_val); end `CMD_SET_DEBUG_CHAIN : // set debug chain begin $get_command_data(set_chain_val); module_select(set_chain_val, 1'b0); // {chain, gen_crc_err} end `CMD_CPU_CTRL_WR : // cpu CTRL write begin $get_command_data(cpu_ctrl_val); debug_cpu_wr_ctrl(cpu_ctrl_val, ""); end `CMD_CPU_CTRL_RD : // cpu CTRL read begin debug_cpu_rd_ctrl(cpu_ctrl_val); $return_command_data(4,cpu_ctrl_val); end `CMD_CPU_WR_REG : begin $get_command_address(cmd_adr); $get_command_data(block_cmd_length); $get_command_block_data(block_cmd_length, data_storage); if (block_cmd_length > 4) cpu_write_block(cmd_adr, block_cmd_length); else begin cmd_data = data_storage[0]; // Get the single word we'll write cpu_write_32(cmd_data, cmd_adr,16'h3); `ifdef VPI_DEBUG_INFO $display("CPU reg write. adr: 0x%x (reg group: %d reg#: %d), val: 0x%x", cmd_adr,cmd_adr[15:11], cmd_adr[10:0], cmd_data); `endif end end `CMD_CPU_RD_REG : begin $get_command_address(cmd_adr); $get_command_data(block_cmd_length); // Added 090901 --jb /* Depending on size, issue a block or single read */ if (block_cmd_length > 4 ) cpu_read_block(cmd_adr, block_cmd_length); else cpu_read_32(cmd_data, cmd_adr, 16'h3); `ifdef VPI_DEBUG_INFO if (cmd_size > 4 ) $display("CPU reg read. block adr: 0x%x (reg group: %d reg#: %d), num: %d", cmd_adr,cmd_adr[15:11], cmd_adr[10:0], block_cmd_length); else $display("CPU reg read. adr: 0x%x (reg group: %d reg#: %d), val: 0x%x", cmd_adr,cmd_adr[15:11], cmd_adr[10:0], cmd_data); `endif $return_command_block_data(block_cmd_length, data_storage); end `CMD_WB_WR : begin $get_command_address(cmd_adr); $get_command_data(cmd_size); $get_command_data(cmd_data); case (cmd_size) 4 : begin wb_write_32(cmd_data, cmd_adr, 16'h3); end 2 : begin wb_write_16(cmd_data[15:0], cmd_adr, 16'h1); end 1 : begin wb_write_8(cmd_data[7:0], cmd_adr, 16'h0); end default: begin $display("* vpi_debug_module: CMD_WB_WR size incorrect: %d\n", cmd_size); end endcase // case (cmd_size) end `CMD_WB_RD32 : begin $get_command_address(cmd_adr); wb_read_32(cmd_data, cmd_adr, 16'h3); $return_command_data(4,cmd_data); end `CMD_WB_RD8 : begin $get_command_address(cmd_adr); wb_read_8(cmd_data, cmd_adr, 16'h0); $return_command_data(1,cmd_data); end `CMD_WB_BLOCK_WR32 : begin $get_command_address(cmd_adr); $get_command_data(block_cmd_length); $get_command_block_data(block_cmd_length, data_storage); wb_block_write_32(cmd_adr ,block_cmd_length); end `CMD_WB_BLOCK_RD32 : begin $get_command_address(cmd_adr); $get_command_data(block_cmd_length); wb_block_read_32(cmd_adr, block_cmd_length); $return_command_block_data(block_cmd_length, data_storage); end `CMD_READ_JTAG_ID : begin read_id_code(id); $return_command_data(4,id); end `CMD_GDB_DETACH : begin $display("(%t)(%m)Debugging client disconnected. Finishing simulation", $time); $finish(); end default: begin $display("Somehow got to the default case in the command case statement."); $display("Command was: %x", cmd); $display("Exiting..."); $finish();//shouldn't be here end endcase // case (cmd) // send back response, which is currently nothing // but could be used to signal something $return_response(); end // while (1) end endtask // main // Receiving data and calculating input crc always @(posedge tck) begin in_data_be[31:1] <= #1 in_data_be[30:0]; in_data_be[0] <= #1 tdo; in_data_le[31] <= #1 tdo; in_data_le[30:0] <= #1 in_data_le[31:1]; end // Generation of the TCK signal task gen_clk; input [31:0] number; integer i; begin for(i=0; i<number; i=i+1) begin #Tck tck<=1; #Tck tck<=0; end end endtask // TAP reset task reset_tap; begin `ifdef DEBUG_INFO $display("(%0t) Task reset_tap", $time); `endif tms<=#1 1'b1; gen_clk(5); end endtask // Goes to RunTestIdle state task goto_run_test_idle; begin `ifdef DEBUG_INFO $display("(%0t) Task goto_run_test_idle", $time); `endif tms<=#1 1'b0; gen_clk(1); end endtask // sets the instruction to the IR register and goes to the RunTestIdle state task set_instruction; input [3:0] instr; integer i; begin `ifdef DEBUG_INFO case (instr) `EXTEST : $display("(%0t) Task set_instruction (EXTEST)", $time); `SAMPLE_PRELOAD : $display("(%0t) Task set_instruction (SAMPLE_PRELOAD)", $time); `IDCODE : $display("(%0t) Task set_instruction (IDCODE)", $time); `DEBUG : $display("(%0t) Task set_instruction (DEBUG)", $time); `MBIST : $display("(%0t) Task set_instruction (MBIST)", $time); `BYPASS : $display("(%0t) Task set_instruction (BYPASS)", $time); default begin $display("(%0t) Task set_instruction (Unsupported instruction !!!)", $time); $display("\tERROR: Unsupported instruction !!!", $time); $stop; end endcase `endif tms<=#1 1; gen_clk(2); tms<=#1 0; gen_clk(2); // we are in shiftIR for(i=0; i<`IR_LENGTH-1; i=i+1) begin tdi<=#1 instr[i]; gen_clk(1); end tdi<=#1 instr[i]; // last shift tms<=#1 1; // going out of shiftIR gen_clk(1); tdi<=#1 'hz; // tri-state gen_clk(1); tms<=#1 0; gen_clk(1); // we are in RunTestIdle end endtask // send 32 bits through the device task test_bypass; input [31:0] in; output [31:0] out; integer i; reg [31:0] out; begin tms<=#Tp 1; gen_clk(1); tms<=#Tp 0; gen_clk(2); // we are in shiftDR for(i=31; i>=0; i=i-1) begin tdi<=#Tp in[i]; gen_clk(1); end tms<=#Tp 1; // going out of shiftDR gen_clk(1); out <=#Tp in_data_be; tdi<=#Tp 'hz; gen_clk(1); tms<=#Tp 0; gen_clk(1); // we are in RunTestIdle end endtask // Reads the ID code task read_id_code; output [31:0] code; reg [31:0] code; begin `ifdef DEBUG_INFO $display("(%0t) Task read_id_code", $time); `endif tms<=#1 1; gen_clk(1); tms<=#1 0; gen_clk(2); // we are in shiftDR tdi<=#1 0; gen_clk(31); tms<=#1 1; // going out of shiftIR gen_clk(1); code = in_data_le; tdi<=#1 'hz; // tri-state gen_clk(1); tms<=#1 0; gen_clk(1); // we are in RunTestIdle end endtask // test bundary scan chain task test_bs; input [31:0] in; output [31:0] out; integer i; reg [31:0] out; begin tms<=#Tp 1; gen_clk(1); tms<=#Tp 0; gen_clk(2); // we are in shiftDR for(i=31; i>=0; i=i-1) begin tdi<=#Tp in[i]; gen_clk(1); end gen_clk(`BS_CELL_NB-1); tms<=#Tp 1; // going out of shiftDR gen_clk(1); out <=#Tp in_data_be; gen_clk(1); tms<=#Tp 0; gen_clk(1); // we are in RunTestIdle end endtask // sets the selected scan chain and goes to the RunTestIdle state task module_select; input [`DBG_TOP_MODULE_ID_LENGTH -1:0] data; input gen_crc_err; integer i; begin `ifdef DEBUG_INFO case (data) `DBG_TOP_CPU1_DEBUG_MODULE : $display("(%0t) Task module_select (DBG_TOP_CPU1_DEBUG_MODULE, gen_crc_err=%0d)", $time, gen_crc_err); `DBG_TOP_CPU0_DEBUG_MODULE : $display("(%0t) Task module_select (DBG_TOP_CPU0_DEBUG_MODULE, gen_crc_err=%0d)", $time, gen_crc_err); `DBG_TOP_WISHBONE_DEBUG_MODULE : $display("(%0t) Task module_select (DBG_TOP_WISHBONE_DEBUG_MODULE gen_crc_err=%0d)", $time, gen_crc_err); default : $display("(%0t) Task module_select (ERROR!!! Unknown module selected)", $time); endcase `endif tms<=#1 1'b1; gen_clk(1); tms<=#1 1'b0; gen_clk(2); // we are in shiftDR status = {`DBG_TOP_STATUS_LEN{1'b0}}; // Initialize status to all 0's crc_out = {`DBG_TOP_CRC_LEN{1'b1}}; // Initialize outgoing CRC to all ff tdi<=#1 1'b1; // module_select bit calculate_crc(1'b1); gen_clk(1); for(i=`DBG_TOP_MODULE_ID_LENGTH -1; i>=0; i=i-1) // Shifting module ID begin tdi<=#1 data[i]; calculate_crc(data[i]); gen_clk(1); end for(i=`DBG_TOP_CRC_LEN -1; i>=0; i=i-1) begin if (gen_crc_err & (i==0)) // Generate crc error at last crc bit tdi<=#1 ~crc_out[i]; // error crc else tdi<=#1 crc_out[i]; // ok crc gen_clk(1); end tdi<=#1 1'hz; // tri-state crc_in = {`DBG_TOP_CRC_LEN{1'b1}}; // Initialize incoming CRC to all ff for(i=`DBG_TOP_STATUS_LEN -1; i>=0; i=i-1) begin gen_clk(1); // Generating 1 clock to read out a status bit. status[i] = tdo; end for(i=0; i<`DBG_TOP_CRC_LEN -1; i=i+1) gen_clk(1); tms<=#1 1'b1; gen_clk(1); // to exit1_dr if (~crc_match_in) begin $display("(%0t) Incoming CRC failed !!!", $time); `ifdef DEBUG_INFO $stop; `endif end tms<=#1 1'b1; gen_clk(1); // to update_dr tms<=#1 1'b0; gen_clk(1); // to run_test_idle if (|status) begin $write("(*E) (%0t) Module select error: ", $time); casex (status) 4'b1xxx : $display("CRC error !!!\n\n", $time); 4'bx1xx : $display("Non-existing module selected !!!\n\n", $time); 4'bxx1x : $display("Status[1] should be 1'b0 !!!\n\n", $time); 4'bxxx1 : $display("Status[0] should be 1'b0 !!!\n\n", $time); endcase `ifdef DEBUG_INFO $stop; `endif end end endtask // module_select // 32-bit write to the wishbone task wb_write_32; input [31:0] data; input [`DBG_WB_ADR_LEN -1:0] addr; input [`DBG_WB_LEN_LEN -1:0] length; begin data_storage[0] = data; debug_wishbone_wr_comm(`DBG_WB_WRITE32, addr, length, 1'b0); last_wb_cmd = `DBG_WB_WRITE32; last_wb_cmd_text = "DBG_WB_WRITE32"; length_global = length + 1; debug_wishbone_go(1'b0, 1'b0); //debug_wishbone_go(1'b1, 1'b0); // maybe causes underrun/overrun error when wait for WB ready? if (length>3) $display("WARNING: Only first data word is stored for writting ( See module %m)"); end endtask // block 32-bit write to the wishbone // presumes data is already in data_storage[] task wb_block_write_32; input [`DBG_WB_ADR_LEN -1:0] addr; input [`DBG_WB_LEN_LEN -1:0] length; begin debug_wishbone_wr_comm(`DBG_WB_WRITE32, addr, length-1, 1'b0); last_wb_cmd = `DBG_WB_WRITE32; last_wb_cmd_text = "DBG_WB_WRITE32"; length_global = length; // number of bytes! debug_wishbone_go(1'b0, 1'b0); //debug_wishbone_go(1'b1, 1'b0); // maybe causes underrun/overrun error when wait for WB ready? end endtask // 32-bit read from the wishbone task wb_read_32; output [31:0] data; input [`DBG_WB_ADR_LEN -1:0] addr; input [`DBG_WB_LEN_LEN -1:0] length; begin debug_wishbone_wr_comm(`DBG_WB_READ32, addr, length, 1'b0); last_wb_cmd = `DBG_WB_READ32; last_wb_cmd_text = "DBG_WB_READ32"; length_global = length + 1; //debug_wishbone_go(1'b0, 1'b0); debug_wishbone_go(1'b1, 1'b0); data = data_storage[0]; if (length>3) $display("WARNING: Only first data word is stored for writting ( See module %m)"); end endtask // wb_read_32 // 8-bit read from the wishbone task wb_read_8; output [31:0] data; input [`DBG_WB_ADR_LEN -1:0] addr; input [`DBG_WB_LEN_LEN -1:0] length; begin debug_wishbone_wr_comm(`DBG_WB_READ8, addr, length, 1'b0); last_wb_cmd = `DBG_WB_READ8; last_wb_cmd_text = "DBG_WB_READ8"; length_global = length + 1; debug_wishbone_go(1'b1, 1'b0); data = data_storage[0]; end endtask // wb_read_8 // block 32-bit read from the wishbone // assumes data will be stored into data_storage[] task wb_block_read_32; input [`DBG_WB_ADR_LEN -1:0] addr; input [`DBG_WB_LEN_LEN -1:0] length; begin debug_wishbone_wr_comm(`DBG_WB_READ32, addr, length-1, 1'b0); last_wb_cmd = `DBG_WB_READ32; last_wb_cmd_text = "DBG_WB_READ32"; length_global = length; //debug_wishbone_go(1'b0, 1'b0); debug_wishbone_go(1'b1, 1'b0); end endtask // 16-bit write to the wishbone task wb_write_16; input [15:0] data; input [`DBG_WB_ADR_LEN -1:0] addr; input [`DBG_WB_LEN_LEN -1:0] length; begin data_storage[0] = {data, 16'h0}; debug_wishbone_wr_comm(`DBG_WB_WRITE16, addr, length, 1'b0); last_wb_cmd = `DBG_WB_WRITE16; last_wb_cmd_text = "DBG_WB_WRITE16"; length_global = length + 1; debug_wishbone_go(1'b0, 1'b0); if (length>1) $display("WARNING: Only first data half is stored for writting ( See module %m)"); end endtask // 8-bit write to the wishbone task wb_write_8; input [7:0] data; input [`DBG_WB_ADR_LEN -1:0] addr; input [`DBG_WB_LEN_LEN -1:0] length; begin data_storage[0] = {data, 24'h0}; debug_wishbone_wr_comm(`DBG_WB_WRITE8, addr, length, 1'b0); last_wb_cmd = `DBG_WB_WRITE8; last_wb_cmd_text = "DBG_WB_WRITE8"; length_global = length + 1; debug_wishbone_go(1'b0, 1'b0); if (length>0) $display("WARNING: Only first data byte is stored for writting ( See module %m)"); end endtask task debug_wishbone_wr_comm; input [`DBG_WB_ACC_TYPE_LEN -1:0] acc_type; input [`DBG_WB_ADR_LEN -1:0] addr; input [`DBG_WB_LEN_LEN -1:0] length; input gen_crc_err; integer i; reg [`DBG_WB_CMD_LEN -1:0] command; begin `ifdef DEBUG_INFO $display("(%0t) Task debug_wishbone_wr_comm: ", $time); `endif command = `DBG_WB_WR_COMM; tms<=#1 1'b1; gen_clk(1); tms<=#1 1'b0; gen_clk(2); // we are in shiftDR crc_out = {`DBG_WB_CRC_LEN{1'b1}}; // Initialize outgoing CRC to all ff tdi<=#1 1'b0; // module_select bit = 0 calculate_crc(1'b0); gen_clk(1); for(i=`DBG_WB_CMD_LEN -1; i>=0; i=i-1) begin tdi<=#1 command[i]; // command calculate_crc(command[i]); gen_clk(1); end for(i=`DBG_WB_ACC_TYPE_LEN -1; i>=0; i=i-1) begin tdi<=#1 acc_type[i]; // command calculate_crc(acc_type[i]); gen_clk(1); end for(i=`DBG_WB_ADR_LEN -1; i>=0; i=i-1) // address begin tdi<=#1 addr[i]; calculate_crc(addr[i]); gen_clk(1); end for(i=`DBG_WB_LEN_LEN -1; i>=0; i=i-1) // length begin tdi<=#1 length[i]; calculate_crc(length[i]); gen_clk(1); end for(i=`DBG_WB_CRC_LEN -1; i>=0; i=i-1) begin if (gen_crc_err & (i==0)) // Generate crc error at last crc bit tdi<=#1 ~crc_out[i]; // error crc else tdi<=#1 crc_out[i]; // ok crc gen_clk(1); end tdi<=#1 1'hz; crc_in = {`DBG_WB_CRC_LEN{1'b1}}; // Initialize incoming CRC to all ff for(i=`DBG_WB_STATUS_LEN -1; i>=0; i=i-1) begin gen_clk(1); // Generating clock to read out a status bit. status_wb[i] = tdo; end if (|status_wb) begin $write("(*E) (%0t) debug_wishbone_wr_comm error: ", $time); casex (status_wb) 4'b1xxx : $display("CRC error !!!\n\n", $time); 4'bx1xx : $display("Unknown command !!!\n\n", $time); 4'bxx1x : $display("WISHBONE error !!!\n\n", $time); 4'bxxx1 : $display("Overrun/Underrun !!!\n\n", $time); endcase `ifdef DEBUG_INFO $stop; `endif end for(i=0; i<`DBG_WB_CRC_LEN -1; i=i+1) // Getting in the CRC begin gen_clk(1); end tms<=#1 1'b1; gen_clk(1); // to exit1_dr if (~crc_match_in) begin $display("(%0t) Incoming CRC failed !!!", $time); `ifdef DEBUG_INFO $stop; `endif end tms<=#1 1'b1; gen_clk(1); // to update_dr tms<=#1 1'b0; gen_clk(1); // to run_test_idle end endtask // debug_wishbone_wr_comm task debug_wishbone_go; input wait_for_wb_ready; input gen_crc_err; integer i; reg [4:0] bit_pointer; integer word_pointer; reg [31:0] tmp_data; reg [`DBG_WB_CMD_LEN -1:0] command; begin `ifdef DEBUG_INFO $display("(%0t) Task debug_wishbone_go (previous command was %0s): ", $time, last_wb_cmd_text); `endif command = `DBG_WB_GO; word_pointer = 0; tms<=#1 1'b1; gen_clk(1); tms<=#1 1'b0; gen_clk(2); // we are in shiftDR crc_out = {`DBG_WB_CRC_LEN{1'b1}}; // Initialize outgoing CRC to all ff tdi<=#1 1'b0; // module_select bit = 0 calculate_crc(1'b0); gen_clk(1); for(i=`DBG_WB_CMD_LEN -1; i>=0; i=i-1) begin tdi<=#1 command[i]; // command calculate_crc(command[i]); gen_clk(1); end // W R I T E if ( (last_wb_cmd == `DBG_WB_WRITE8) | (last_wb_cmd == `DBG_WB_WRITE16) | (last_wb_cmd == `DBG_WB_WRITE32) ) // When WB_WRITEx was previously activated, data needs to be shifted. begin for (i=0; i<((length_global) << 3); i=i+1) begin if ((!(i%32)) && (i>0)) begin word_pointer = word_pointer + 1; end tmp_data = data_storage[word_pointer]; bit_pointer = 31-i[4:0]; tdi<=#1 tmp_data[bit_pointer]; calculate_crc(tmp_data[bit_pointer]); gen_clk(1); end end for(i=`DBG_WB_CRC_LEN -1; i>=1; i=i-1) begin tdi<=#1 crc_out[i]; gen_clk(1); end if (gen_crc_err) // Generate crc error at last crc bit tdi<=#1 ~crc_out[0]; // error crc else tdi<=#1 crc_out[0]; // ok crc if (wait_for_wb_ready) begin tms<=#1 1'b1; gen_clk(1); // to exit1_dr. Last CRC is shifted on this clk tms<=#1 1'b0; gen_clk(1); // to pause_dr #2; // wait a bit for tdo to activate while (tdo) // waiting for wb to send "ready" begin gen_clk(1); // staying in pause_dr end tms<=#1 1'b1; gen_clk(1); // to exit2_dr tms<=#1 1'b0; gen_clk(1); // to shift_dr end else begin gen_clk(1); // Last CRC is shifted on this clk end tdi<=#1 1'hz; // R E A D crc_in = {`DBG_WB_CRC_LEN{1'b1}}; // Initialize incoming CRC to all ff if ( (last_wb_cmd == `DBG_WB_READ8) | (last_wb_cmd == `DBG_WB_READ16) | (last_wb_cmd == `DBG_WB_READ32) ) // When WB_READx was previously activated, data needs to be shifted. begin `ifdef DEBUG_INFO $display("\t\tGenerating %0d clocks to read %0d data bytes.", length_global<<3, length_global); `endif word_pointer = 0; // Reset pointer for (i=0; i<(length_global<<3); i=i+1) begin gen_clk(1); if (i[2:0] == 7) // Latching data incoming_word = {incoming_word[23:0],in_data_be[7:0]}; if (i[4:0] == 31) begin data_storage[word_pointer] = incoming_word; `ifdef DEBUG_INFO $display("\t\tin_data_be = 0x%x", incoming_word); `endif word_pointer = word_pointer + 1; end end // for (i=0; i<(length_global<<3); i=i+1) // Copy in any leftovers if (length_global[1:0] != 0) begin data_storage[word_pointer] = incoming_word; `ifdef DEBUG_INFO $display("\t\tin_data_be = 0x%x", incoming_word); `endif end end for(i=`DBG_WB_STATUS_LEN -1; i>=0; i=i-1) begin gen_clk(1); // Generating clock to read out a status bit. status_wb[i] = tdo; end if (|status_wb) begin $write("(*E) (%0t) debug_wishbone_go error: ", $time); casex (status_wb) 4'b1xxx : $display("CRC error !!!\n\n", $time); 4'bx1xx : $display("Unknown command !!!\n\n", $time); 4'bxx1x : $display("WISHBONE error !!!\n\n", $time); 4'bxxx1 : $display("Overrun/Underrun !!!\n\n", $time); endcase `ifdef DEBUG_INFO $stop; `endif end for(i=0; i<`DBG_WB_CRC_LEN -1; i=i+1) // Getting in the CRC begin gen_clk(1); end tms<=#1 1'b1; gen_clk(1); // to exit1_dr if (~crc_match_in) begin $display("(%0t) Incoming CRC failed !!!", $time); `ifdef DEBUG_INFO $stop; `endif end tms<=#1 1'b1; gen_clk(1); // to update_dr tms<=#1 1'b0; gen_clk(1); // to run_test_idle end endtask // debug_wishbone_go task debug_cpu_wr_ctrl; input [`DBG_CPU_DR_LEN -1:0] data; input [99:0] text; integer i; reg [`DBG_CPU_CMD_LEN -1:0] command; begin test_text = text; `ifdef DEBUG_INFO $display("(%0t) Task debug_cpu_wr_ctrl (data=0x%0x (%0s))", $time, data, text); `endif command = `DBG_CPU_WR_CTRL; tms<=#1 1'b1; gen_clk(1); tms<=#1 1'b0; gen_clk(2); // we are in shiftDR crc_out = {`DBG_CPU_CRC_LEN{1'b1}}; // Initialize outgoing CRC to all ff tdi<=#1 1'b0; // module_select bit = 0 calculate_crc(1'b0); gen_clk(1); for(i=`DBG_CPU_CMD_LEN -1; i>=0; i=i-1) begin tdi<=#1 command[i]; // command calculate_crc(command[i]); gen_clk(1); end for(i=`DBG_CPU_CTRL_LEN -1; i>=0; i=i-1) begin tdi<=#1 data[i]; // data (used cotrol bits calculate_crc(data[i]); gen_clk(1); end for(i=`DBG_CPU_DR_LEN - `DBG_CPU_CTRL_LEN -1; i>=0; i=i-1) // unused control bits begin tdi<=#1 1'b0; calculate_crc(1'b0); gen_clk(1); end for(i=`DBG_CPU_CRC_LEN -1; i>=0; i=i-1) begin tdi<=#1 crc_out[i]; // ok crc gen_clk(1); end tdi<=#1 1'hz; crc_in = {`DBG_CPU_CRC_LEN{1'b1}}; // Initialize incoming CRC to all ff for(i=`DBG_CPU_STATUS_LEN -1; i>=0; i=i-1) begin gen_clk(1); // Generating clock to read out a status bit. status_cpu[i] = tdo; end if (|status_cpu) begin $write("(*E) (%0t) debug_cpu_wr_ctrl error: ", $time); casex (status_cpu) 4'b1xxx : $display("CRC error !!!\n\n", $time); 4'bx1xx : $display("??? error !!!\n\n", $time); 4'bxx1x : $display("??? error !!!\n\n", $time); 4'bxxx1 : $display("??? error !!!\n\n", $time); endcase `ifdef DEBUG_INFO $stop; `endif end for(i=0; i<`DBG_CPU_CRC_LEN -1; i=i+1) // Getting in the CRC begin gen_clk(1); end tms<=#1 1'b1; gen_clk(1); // to exit1_dr if (~crc_match_in) begin $display("(%0t) Incoming CRC failed !!!", $time); `ifdef DEBUG_INFO $stop; `endif end tms<=#1 1'b1; gen_clk(1); // to update_dr tms<=#1 1'b0; gen_clk(1); // to run_test_idle end endtask // debug_cpu_wr_ctrl task debug_cpu_rd_ctrl; output [`DBG_CPU_DR_LEN -1:0] data; //input [99:0] text; integer i; reg [`DBG_CPU_CMD_LEN -1:0] command; begin `ifdef DEBUG_INFO $display("(%0t) Task debug_cpu_rd_ctrl", $time); `endif command = `DBG_CPU_RD_CTRL; tms<=#1 1'b1; gen_clk(1); tms<=#1 1'b0; gen_clk(2); // we are in shiftDR crc_out = {`DBG_CPU_CRC_LEN{1'b1}}; // Initialize outgoing CRC to all ff tdi<=#1 1'b0; // module_select bit = 0 calculate_crc(1'b0); gen_clk(1); for(i=`DBG_CPU_CMD_LEN -1; i>=0; i=i-1) begin tdi<=#1 command[i]; // command calculate_crc(command[i]); gen_clk(1); end for(i=`DBG_CPU_CRC_LEN -1; i>=0; i=i-1) begin tdi<=#1 crc_out[i]; // ok crc gen_clk(1); end tdi<=#1 1'hz; crc_in = {`DBG_CPU_CRC_LEN{1'b1}}; // Initialize incoming CRC to all ff // Read incoming debug ctrl data (52 bits) //cpu_ctrl_val[1:0]; gen_clk(1); //cpu_ctrl_val[0] <= #1 tdo; // cpu reset bit data[0] <= #1 tdo; // cpu reset bit gen_clk(1); //cpu_ctrl_val[1] <= #1 tdo; // cpu stall bit data[1] <= #1 tdo; // cpu stall bit for(i=`DBG_CPU_DR_LEN - `DBG_CPU_CTRL_LEN -1; i>=0; i=i-1) // unused control bits begin gen_clk(1); end for(i=`DBG_CPU_STATUS_LEN -1; i>=0; i=i-1) begin gen_clk(1); // Generating clock to read out a status bit. status_cpu[i] = tdo; end if (|status_cpu) begin $write("(*E) (%0t) debug_cpu_wr_ctrl error: ", $time); casex (status_cpu) 4'b1xxx : $display("CRC error !!!\n\n", $time); 4'bx1xx : $display("??? error !!!\n\n", $time); 4'bxx1x : $display("??? error !!!\n\n", $time); 4'bxxx1 : $display("??? error !!!\n\n", $time); endcase // casex (status_cpu) end for(i=0; i<`DBG_CPU_CRC_LEN -1; i=i+1) // Getting in the CRC begin gen_clk(1); end tms<=#1 1'b1; gen_clk(1); // to exit1_dr if (~crc_match_in) begin $display("(%0t) Incoming CRC failed !!!", $time); end tms<=#1 1'b1; gen_clk(1); // to update_dr tms<=#1 1'b0; gen_clk(1); // to run_test_idle end endtask // debug_cpu_rd_ctrl // 32-bit read from cpu task cpu_read_32; output [31:0] data; input [`DBG_WB_ADR_LEN -1:0] addr; input [`DBG_WB_LEN_LEN -1:0] length; reg [31:0] tmp; begin debug_cpu_wr_comm(`DBG_CPU_READ, addr, length, 1'b0); last_cpu_cmd = `DBG_CPU_READ; last_cpu_cmd_text = "DBG_CPU_READ"; length_global = length + 1; debug_cpu_go(1'b0, 1'b0); data = data_storage[0]; if (length>3) $display("WARNING: Only first data word is returned( See module %m.)"); end endtask // block of 32-bit reads from cpu task cpu_read_block; //output [31:0] data; input [`DBG_WB_ADR_LEN -1:0] addr; input [`DBG_WB_LEN_LEN -1:0] length; reg [31:0] tmp; begin debug_cpu_wr_comm(`DBG_CPU_READ, addr, length-1, 1'b0); last_cpu_cmd = `DBG_CPU_READ; last_cpu_cmd_text = "DBG_CPU_READ"; length_global = length; debug_cpu_go(1'b0, 1'b0); //data = data_storage[0]; //if (length>3) // $display("WARNING: Only first data word is returned( See module %m.)"); end endtask // 32-bit write to cpu task cpu_write_32; input [31:0] data; input [`DBG_WB_ADR_LEN -1:0] addr; input [`DBG_WB_LEN_LEN -1:0] length; reg [31:0] tmp; begin debug_cpu_wr_comm(`DBG_CPU_WRITE, addr, length, 1'b0); last_cpu_cmd = `DBG_CPU_WRITE; last_cpu_cmd_text = "DBG_CPU_WRITE"; length_global = length + 1; data_storage[0] = data; debug_cpu_go(1'b0, 1'b0); if (length>3) $display("WARNING: Only first data word is stored for writting ( See module %m)"); end endtask // block of 32-bit writes to cpu // Data will already be in data_storage task cpu_write_block; //input [31:0] data; input [`DBG_WB_ADR_LEN -1:0] addr; input [`DBG_WB_LEN_LEN -1:0] length; reg [31:0] tmp; begin debug_cpu_wr_comm(`DBG_CPU_WRITE, addr, length-1, 1'b0); last_cpu_cmd = `DBG_CPU_WRITE; last_cpu_cmd_text = "DBG_CPU_WRITE"; length_global = length; debug_cpu_go(1'b0, 1'b0); end endtask task debug_cpu_wr_comm; input [`DBG_CPU_ACC_TYPE_LEN -1:0] acc_type; input [`DBG_CPU_ADR_LEN -1:0] addr; input [`DBG_CPU_LEN_LEN -1:0] length; input gen_crc_err; integer i; reg [`DBG_CPU_CMD_LEN -1:0] command; begin `ifdef DEBUG_INFO $display("(%0t) Task debug_cpu_wr_comm: ", $time); `endif command = `DBG_CPU_WR_COMM; tms<=#1 1'b1; gen_clk(1); tms<=#1 1'b0; gen_clk(2); // we are in shiftDR crc_out = {`DBG_CPU_CRC_LEN{1'b1}}; // Initialize outgoing CRC to all ff tdi<=#1 1'b0; // module_select bit = 0 calculate_crc(1'b0); gen_clk(1); for(i=`DBG_CPU_CMD_LEN -1; i>=0; i=i-1) begin tdi<=#1 command[i]; // command calculate_crc(command[i]); gen_clk(1); end for(i=`DBG_CPU_ACC_TYPE_LEN -1; i>=0; i=i-1) begin tdi<=#1 acc_type[i]; // command calculate_crc(acc_type[i]); gen_clk(1); end for(i=`DBG_CPU_ADR_LEN -1; i>=0; i=i-1) // address begin tdi<=#1 addr[i]; calculate_crc(addr[i]); gen_clk(1); end for(i=`DBG_CPU_LEN_LEN -1; i>=0; i=i-1) // length begin tdi<=#1 length[i]; calculate_crc(length[i]); gen_clk(1); end for(i=`DBG_CPU_CRC_LEN -1; i>=0; i=i-1) begin if (gen_crc_err & (i==0)) // Generate crc error at last crc bit tdi<=#1 ~crc_out[i]; // error crc else tdi<=#1 crc_out[i]; // ok crc gen_clk(1); end tdi<=#1 1'hz; crc_in = {`DBG_CPU_CRC_LEN{1'b1}}; // Initialize incoming CRC to all ff for(i=`DBG_CPU_STATUS_LEN -1; i>=0; i=i-1) begin gen_clk(1); // Generating clock to read out a status bit. status_cpu[i] = tdo; end if (|status_cpu) begin $write("(*E) (%0t) debug_cpu_wr_comm error: ", $time); casex (status_cpu) 4'b1xxx : $display("CRC error !!!\n\n", $time); 4'bx1xx : $display("Unknown command !!!\n\n", $time); 4'bxx1x : $display("??? error !!!\n\n", $time); 4'bxxx1 : $display("Overrun/Underrun !!!\n\n", $time); endcase `ifdef DEBUG_INFO $stop; `endif end for(i=0; i<`DBG_CPU_CRC_LEN -1; i=i+1) // Getting in the CRC begin gen_clk(1); end tms<=#1 1'b1; gen_clk(1); // to exit1_dr if (~crc_match_in) begin $display("(%0t) Incoming CRC failed !!!", $time); `ifdef DEBUG_INFO $stop; `endif end tms<=#1 1'b1; gen_clk(1); // to update_dr tms<=#1 1'b0; gen_clk(1); // to run_test_idle end endtask // debug_cpu_wr_comm task debug_cpu_go; input wait_for_cpu_ready; input gen_crc_err; integer i; reg [4:0] bit_pointer; integer word_pointer; reg [31:0] tmp_data; reg [`DBG_CPU_CMD_LEN -1:0] command; begin `ifdef DEBUG_INFO $display("(%0t) Task debug_cpu_go (previous command was %0s): ", $time, last_cpu_cmd_text); `endif command = `DBG_CPU_GO; word_pointer = 0; tms<=#1 1'b1; gen_clk(1); tms<=#1 1'b0; gen_clk(2); // we are in shiftDR crc_out = {`DBG_CPU_CRC_LEN{1'b1}}; // Initialize outgoing CRC to all ff tdi<=#1 1'b0; // module_select bit = 0 calculate_crc(1'b0); gen_clk(1); for(i=`DBG_CPU_CMD_LEN -1; i>=0; i=i-1) begin tdi<=#1 command[i]; // command calculate_crc(command[i]); gen_clk(1); end if (last_cpu_cmd == `DBG_CPU_WRITE) // When DBG_CPU_WRITE was previously activated, data needs to be shifted. begin for (i=0; i<((length_global) << 3); i=i+1) begin tmp_data = data_storage[word_pointer]; if ((!(i%32)) && (i>0)) begin word_pointer = word_pointer + 1; end bit_pointer = 31-i[4:0]; tdi<=#1 tmp_data[bit_pointer]; calculate_crc(tmp_data[bit_pointer]); gen_clk(1); end end for(i=`DBG_CPU_CRC_LEN -1; i>=1; i=i-1) begin tdi<=#1 crc_out[i]; gen_clk(1); end if (gen_crc_err) // Generate crc error at last crc bit tdi<=#1 ~crc_out[0]; // error crc else tdi<=#1 crc_out[0]; // ok crc if (wait_for_cpu_ready) begin tms<=#1 1'b1; gen_clk(1); // to exit1_dr. Last CRC is shifted on this clk tms<=#1 1'b0; gen_clk(1); // to pause_dr #2; // wait a bit for tdo to activate while (tdo) // waiting for wb to send "ready" begin gen_clk(1); // staying in pause_dr end tms<=#1 1'b1; gen_clk(1); // to exit2_dr tms<=#1 1'b0; gen_clk(1); // to shift_dr end else begin gen_clk(1); // Last CRC is shifted on this clk end tdi<=#1 1'hz; crc_in = {`DBG_CPU_CRC_LEN{1'b1}}; // Initialize incoming CRC to all ff if (last_cpu_cmd == `DBG_CPU_READ) // When DBG_CPU_READ was previously activated, data needs to be shifted. begin `ifdef DEBUG_INFO $display("\t\tGenerating %0d clocks to read %0d data bytes.", length_global<<3, length_global); `endif word_pointer = 0; // Reset pointer for (i=0; i<(length_global<<3); i=i+1) begin gen_clk(1); if (i[4:0] == 31) // Latching data begin data_storage[word_pointer] = in_data_be; `ifdef DEBUG_INFO $display("\t\tin_data_be = 0x%x", in_data_be); `endif word_pointer = word_pointer + 1; end end end for(i=`DBG_CPU_STATUS_LEN -1; i>=0; i=i-1) begin gen_clk(1); // Generating clock to read out a status bit. status_cpu[i] = tdo; end if (|status_cpu) begin $write("(*E) (%0t) debug_cpu_go error: ", $time); casex (status_cpu) 4'b1xxx : $display("CRC error !!!\n\n", $time); 4'bx1xx : $display("Unknown command !!!\n\n", $time); 4'bxx1x : $display("??? error !!!\n\n", $time); 4'bxxx1 : $display("Overrun/Underrun !!!\n\n", $time); endcase $stop; end for(i=0; i<`DBG_CPU_CRC_LEN -1; i=i+1) // Getting in the CRC begin gen_clk(1); end tms<=#1 1'b1; gen_clk(1); // to exit1_dr if (~crc_match_in) begin $display("(%0t) Incoming CRC failed !!!", $time); $stop; end tms<=#1 1'b1; gen_clk(1); // to update_dr tms<=#1 1'b0; gen_clk(1); // to run_test_idle end endtask // debug_cpu_go // Calculating outgoing CRC task calculate_crc; input data; begin crc_out[0] <= #1 data ^ crc_out[31]; crc_out[1] <= #1 data ^ crc_out[0] ^ crc_out[31]; crc_out[2] <= #1 data ^ crc_out[1] ^ crc_out[31]; crc_out[3] <= #1 crc_out[2]; crc_out[4] <= #1 data ^ crc_out[3] ^ crc_out[31]; crc_out[5] <= #1 data ^ crc_out[4] ^ crc_out[31]; crc_out[6] <= #1 crc_out[5]; crc_out[7] <= #1 data ^ crc_out[6] ^ crc_out[31]; crc_out[8] <= #1 data ^ crc_out[7] ^ crc_out[31]; crc_out[9] <= #1 crc_out[8]; crc_out[10] <= #1 data ^ crc_out[9] ^ crc_out[31]; crc_out[11] <= #1 data ^ crc_out[10] ^ crc_out[31]; crc_out[12] <= #1 data ^ crc_out[11] ^ crc_out[31]; crc_out[13] <= #1 crc_out[12]; crc_out[14] <= #1 crc_out[13]; crc_out[15] <= #1 crc_out[14]; crc_out[16] <= #1 data ^ crc_out[15] ^ crc_out[31]; crc_out[17] <= #1 crc_out[16]; crc_out[18] <= #1 crc_out[17]; crc_out[19] <= #1 crc_out[18]; crc_out[20] <= #1 crc_out[19]; crc_out[21] <= #1 crc_out[20]; crc_out[22] <= #1 data ^ crc_out[21] ^ crc_out[31]; crc_out[23] <= #1 data ^ crc_out[22] ^ crc_out[31]; crc_out[24] <= #1 crc_out[23]; crc_out[25] <= #1 crc_out[24]; crc_out[26] <= #1 data ^ crc_out[25] ^ crc_out[31]; crc_out[27] <= #1 crc_out[26]; crc_out[28] <= #1 crc_out[27]; crc_out[29] <= #1 crc_out[28]; crc_out[30] <= #1 crc_out[29]; crc_out[31] <= #1 crc_out[30]; end endtask // calculate_crc // Calculating and checking input CRC always @(posedge tck) begin crc_in[0] <= #1 tdo ^ crc_in[31]; crc_in[1] <= #1 tdo ^ crc_in[0] ^ crc_in[31]; crc_in[2] <= #1 tdo ^ crc_in[1] ^ crc_in[31]; crc_in[3] <= #1 crc_in[2]; crc_in[4] <= #1 tdo ^ crc_in[3] ^ crc_in[31]; crc_in[5] <= #1 tdo ^ crc_in[4] ^ crc_in[31]; crc_in[6] <= #1 crc_in[5]; crc_in[7] <= #1 tdo ^ crc_in[6] ^ crc_in[31]; crc_in[8] <= #1 tdo ^ crc_in[7] ^ crc_in[31]; crc_in[9] <= #1 crc_in[8]; crc_in[10] <= #1 tdo ^ crc_in[9] ^ crc_in[31]; crc_in[11] <= #1 tdo ^ crc_in[10] ^ crc_in[31]; crc_in[12] <= #1 tdo ^ crc_in[11] ^ crc_in[31]; crc_in[13] <= #1 crc_in[12]; crc_in[14] <= #1 crc_in[13]; crc_in[15] <= #1 crc_in[14]; crc_in[16] <= #1 tdo ^ crc_in[15] ^ crc_in[31]; crc_in[17] <= #1 crc_in[16]; crc_in[18] <= #1 crc_in[17]; crc_in[19] <= #1 crc_in[18]; crc_in[20] <= #1 crc_in[19]; crc_in[21] <= #1 crc_in[20]; crc_in[22] <= #1 tdo ^ crc_in[21] ^ crc_in[31]; crc_in[23] <= #1 tdo ^ crc_in[22] ^ crc_in[31]; crc_in[24] <= #1 crc_in[23]; crc_in[25] <= #1 crc_in[24]; crc_in[26] <= #1 tdo ^ crc_in[25] ^ crc_in[31]; crc_in[27] <= #1 crc_in[26]; crc_in[28] <= #1 crc_in[27]; crc_in[29] <= #1 crc_in[28]; crc_in[30] <= #1 crc_in[29]; crc_in[31] <= #1 crc_in[30]; end assign crc_match_in = crc_in == 32'h0; endmodule // vpi_debug_module
Go to most recent revision | Compare with Previous | Blame | View Log