Subversion Repositories openrisc

/* ordb1a3pe1500-or1ksim.cfg -- Simulator configuration script file for 
   ordb1a3pe1500 ORPSoC board build.

   Copyright (C) 2001-2002, Marko Mlinar, markom@opencores.org
   Copyright (C) 2010, Embecosm Limited

   Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>

   This file is part of OpenRISC 1000 Architectural Simulator.
  
   This program is free software; you can redistribute it and/or modify it
   under the terms of the GNU General Public License as published by the Free
   Software Foundation; either version 3 of the License, or (at your option)
   any later version.
  
   This program is distributed in the hope that it will be useful, but WITHOUT
   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
   more details.
  
   You should have received a copy of the GNU General Public License along
   with this program.  If not, see <http://www.gnu.org/licenses/>. */


/* -------------------------------------------------------------------------- */
/* The Ork1sim has various parameters, that can be set in configuration files
   like this one. The user can specify a configuration file at startu[ with
   the -f <filename.cfg> option.

   The user guide (see the 'doc' directory) gives full details on
   configuration files. This is a reference configuration, which may be used
   as a starting point for customization.

   A number of peripherals are mapped at standard addresses (above 0x80000000)
   in the Verilog RTL of ORPSoC standard sitribution. The same values should
   be used in Or1ksim section definitions to match the behavior of the Verilog

      0x90000000 UART
      0x91000000 GPIO
      0x92000000 Ethernet

   Not all verilog modules are modeled in or1ksim.                            */
/* -------------------------------------------------------------------------- */


/* Simulator section

   verbose               = 0|1
   debug                 = 0-9
   profile               = 0|1
   prof_file             = "<filename>" (default: "sim.profile")
   mprofile              = 0|1
   mprof_file            = "<filename>" (default: "sim.mprofile")
   history               = 0|1
   exe_log               = 0|1
   exe_log_type          = hardware|simple|software|default
   exe_log_start         = <value> (default: 0)
   exe_log_end           = <value> (default: never end)
   exe_log_marker        = <value> (default: no markers)
   exe_log_file          = "<filename>" (default: "executed.log")
   exe_bin_insn_log      = 0|1
   exe_bin_insn_log_file = "<filename>" (default: "exe-insn.bin")
   clkcycle              = <value>[ps|ns|us|ms]
*/
section sim
  clkcycle = 50ns
end

/* CPU section

   ver         = <value> (default: 0)
   cfg         = <value> (default: 0)
   rev         = <value> (default: 0)
   upr         = <value> (see user manual for default settings)
   cfgr        = <value> (default: 0x00000020)
   sr          = <value> (default: 0x00008001)
   superscalar = 0|1
   hazards     = 0|1
   dependstats = 0|1
   sbuf_len    = <value> (default: 0)
   hardfloat   = 0|1
*/
section cpu
  ver = 0x12
  cfg = 0x00
  rev = 0x0001
end


/* Memory section

   type        = unknown|random|unknown|pattern
   random_seed = <value> (default: -1)
   pattern     = <value> (default: 0)
   baseaddr    = <hex_value> (default: 0)
   size        = <hex_value> (default: 1024)
   name        = "<string>" (default: "anonymous memory block")
   ce          = <value> (default: -1)
   mc          = <value> (default: 0)
   delayr      = <value> (default: 1)
   delayw      = <value> (default: 1)
   log         = "<filename>" (default: NULL)
*/
section memory
  name        = "RAM"
  type        = unknown
  baseaddr    = 0x00000000
  size        = 0x02000000
  delayr      = 1
  delayw      = 1
end


/* Data MMU section

   enabled   = 0|1
   nsets     = <value> (default: 1)
   nways     = <value> (default: 1)
   pagesize  = <value> (default: 8192)
   entrysize = <value> (default: 1)
   ustates   = <value> (default: 1)
   hitdelay  = <value> (default: 1)
   missdelay = <value> (default: 1)
*/
section dmmu
  enabled   = 1
  nsets     = 64
  nways     = 1
  pagesize  = 8192
  hitdelay  = 0
  missdelay = 0
end


/* Instruction MMU section

   enabled   = 0|1
   nsets     = <value> (default: 1)
   nways     = <value> (default: 1)
   pagesize  = <value> (default: 8192)
   entrysize = <value> (default: 1)
   ustates   = <value> (default: 1)
   hitdelay  = <value> (default: 1)
   missdelay = <value> (default: 1)
*/
section immu
  enabled   = 1
  nsets     = 64
  nways     = 1
  pagesize  = 8192
  hitdelay  = 0
  missdelay = 0
end


/* Data cache section

   enabled         = 0|1
   nsets           = <value> (default: 1)
   nways           = <value> (default: 1)
   blocksize       = <value> (default: 16)
   ustates         = <value> (default: 2)
   load_hitdelay   = <value> (default: 2)
   load_missdelay  = <value> (default: 2)
   store_hitdelay  = <value> (default: 0)
   store_missdelay = <value> (default: 0)
*/

section dc
  enabled         = 1
  nsets           = 256
  nways           = 1
  blocksize       = 16
  load_hitdelay   = 0
  load_missdelay  = 0
  store_hitdelay  = 0
  store_missdelay = 0
end


/* Instruction cache section

   enabled    = 0|1
   nsets      = <value> (default: 1)
   nways      = <value> (default: 1)
   blocksize  = <value> (default: 16)
   ustates    = <value> (default: 2)
   hitdelay   = <value> (default: 1)
   missdelay  = <value> (default: 1)
*/
section ic
  enabled   = 1
  nsets     = 512
  nways     = 1
  blocksize = 16
  hitdelay  = 0
  missdelay = 0
end


/* Programmable interrupt controller section

  enabled      = 0|1
  edge_trigger = 0|1 (default: 1)
*/

section pic
  enabled = 1
end


/* Power management section

   enabled = 0|1
*/

section pm
  enabled = 0
end

/* Debug unit section

   enabled     = 0|1
   rsp_enabled = 0|1
   rsp_port    = <value> (default: 51000)
   vapi_id     = <value> (default: 0)
*/
section debug
  enabled = 0
end


/* UART section

   enabled  = 0|1
   baseaddr = <value> (default: 0)
   channel  = "value>" (default: "xterm:")
   irq      = <value> (default: 0)
   16550    = 0|1
   jitter   = <value> (default: 0)
   vapi_id  = <value> (default: 0)
*/

section uart
  enabled  = 1
  baseaddr = 0x90000000
  irq      = 2
  16550    = 1
end

/* Ethernet section

   enabled    = 0|1
   baseaddr   = <value> (default: 0)
   dma        = <value> (default: 0)
   irq        = <value> (default: 0)
   rtx_type   = 0|1
   rx_channel = <value> (default: 0)
   tx_channel = <value> (default: 0)
   rxfile     = "<filename>" (default: "eth_rx")
   txfile     = "<filename>" (default: "eth_rx")
   sockif     = "<service>" (default: "or1ksim_eth")
   vapi_id    = <value> (default: 0)
*/
section ethernet
  enabled  = 1
  baseaddr = 0x92000000
  irq      = 4
  rtx_type = "tap"
  tap_dev = "tap0"
  dummy_crc = 1
end