OpenCores
URL https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk

Subversion Repositories openrisc_me

[/] [openrisc/] [trunk/] [orpsocv2/] [boards/] [actel/] [ordb1a3pe1500/] [sw/] [board/] [include/] [board.h] - Rev 483

Compare with Previous | Blame | View Log

#ifndef _BOARD_H_
#define _BOARD_H_
 
//#define IN_CLK  	      50000000 // Hz
//#define IN_CLK  	      32000000 // Hz
//#define IN_CLK  	      30000000 // HZ
//#define IN_CLK  	      24000000 // HZ
#define IN_CLK  	      20000000 // HZ
//#define IN_CLK  	      18000000 // HZ
//#define IN_CLK  	      16000000 // HZ
 
//
// ROM bootloader
//
// Uncomment the appropriate bootloader define. This will effect the bootrom.S
// file, which is compiled and converted into Verilog for inclusion at 
// synthesis time. See bootloader/bootloader.S for details on each option.
#ifndef PRELOAD_RAM
#define BOOTROM_SPI_FLASH
//#define BOOTROM_GOTO_RESET
//#define BOOTROM_LOOP_AT_ZERO
//#define BOOTROM_LOOP_IN_ROM
#else
#define BOOTROM_GOTO_RESET
#endif
 
//
// Defines for each core (memory map base, OR1200 interrupt line number, etc.)
//
#define SDRAM_BASE                 0x0
//#define MT48LC32M16A2 // 64MB SDRAM part
#define MT48LC16M16A2 // 32MB SDRAM part
//#define MT48LC4M16A2 // 8MB SDRAM part
 
#define FLASHROM_BASE       0xcf000000
#define FLASHROM_SIZE            0x100
 
#define GPIO_0_BASE         0x91000000
 
#define UART0_BASE  	    0x90000000
#define UART0_IRQ                    2
#define UART0_BAUD_RATE 	115200
 
#define UART1_BASE  	    0x93000000
#define UART1_IRQ                    3
#define UART1_BAUD_RATE 	115200
 
#define UART2_BASE  	    0x94000000
#define UART2_IRQ                    5
#define UART2_BAUD_RATE 	115200
 
#define SPI0_BASE           0xb0000000
#define SPI0_IRQ                     6
 
#define SPI1_BASE           0xb1000000
#define SPI1_IRQ                     7
 
#define SPI2_BASE           0xb2000000
#define SPI2_IRQ                     8
 
#define I2C_0_BASE          0xa0000000
#define I2C_0_IRQ                   10
 
#define I2C_1_BASE          0xa1000000
#define I2C_1_IRQ                   11
 
#define I2C_2_BASE          0xa2000000
#define I2C_2_IRQ                   12
 
#define I2C_3_BASE          0xa3000000
#define I2C_3_IRQ                   13
 
#define USB0_BASE            0x9c000000
#define USB0_HOST_IRQ                20
#define USB0_SLAVE_IRQ               21
 
#define USB1_BASE            0x9d000000
#define USB1_HOST_IRQ                22
#define USB1_SLAVE_IRQ               23
 
#define ETH0_BASE            0x92000000
#define ETH0_IRQ                      4
 
#define ETH_MACADDR0	           0x00
#define ETH_MACADDR1	           0x12
#define ETH_MACADDR2  	           0x34
#define ETH_MACADDR3	           0x56
#define ETH_MACADDR4  	           0x78
#define ETH_MACADDR5	           0x9a
 
 
//
// OR1200 tick timer period define
//
#define TICKS_PER_SEC   100
 
#endif
 

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.