URL
https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk
Subversion Repositories openrisc_me
[/] [openrisc/] [trunk/] [orpsocv2/] [boards/] [generic/] [ft/] [rtl/] [verilog/] [orpsoc_top/] [orpsoc_top.v] - Rev 483
Compare with Previous | Blame | View Log
////////////////////////////////////////////////////////////////////// /// //// /// ORPSoC top level //// /// //// /// Define I/O ports, instantiate modules //// /// //// /// Julius Baxter, julius@opencores.org //// /// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2009, 2010 Authors and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// `include "orpsoc-defines.v" `include "or1200_defines.v" module orpsoc_top ( `ifdef JTAG_DEBUG tdo_pad_o, tms_pad_i, tck_pad_i, tdi_pad_i, `endif clk_pad_i, rst_n_pad_i ); `include "orpsoc-params.v" input clk_pad_i; input rst_n_pad_i; `ifdef JTAG_DEBUG output tdo_pad_o; input tms_pad_i; input tck_pad_i; input tdi_pad_i; `endif //////////////////////////////////////////////////////////////////////// // // Clock and reset generation module // //////////////////////////////////////////////////////////////////////// // // Wires // wire async_rst; wire wb_clk, wb_rst; wire dbg_tck; clkgen clkgen0 ( .clk_pad_i (clk_pad_i), .async_rst_o (async_rst), .wb_clk_o (wb_clk), .wb_rst_o (wb_rst), `ifdef JTAG_DEBUG .tck_pad_i (tck_pad_i), .dbg_tck_o (dbg_tck), `endif // Asynchronous active low reset .rst_n_pad_i (rst_n_pad_i) ); //////////////////////////////////////////////////////////////////////// // // Arbiter // //////////////////////////////////////////////////////////////////////// // Wire naming convention: // First: wishbone master or slave (wbm/wbs) // Second: Which bus it's on instruction or data (i/d) // Third: Between which module and the arbiter the wires are // Fourth: Signal name // Fifth: Direction relative to module (not bus/arbiter!) // ie. wbm_d_or12_adr_o is address OUT from the or1200 // OR1200 instruction bus wires wire [wb_aw-1:0] wbm_i_or12_adr_o; wire [wb_dw-1:0] wbm_i_or12_dat_o; wire [3:0] wbm_i_or12_sel_o; wire wbm_i_or12_we_o; wire wbm_i_or12_cyc_o; wire wbm_i_or12_stb_o; wire [2:0] wbm_i_or12_cti_o; wire [1:0] wbm_i_or12_bte_o; wire [wb_dw-1:0] wbm_i_or12_dat_i; wire wbm_i_or12_ack_i; wire wbm_i_or12_err_i; wire wbm_i_or12_rty_i; // OR1200 data bus wires wire [wb_aw-1:0] wbm_d_or12_adr_o; wire [wb_dw-1:0] wbm_d_or12_dat_o; wire [3:0] wbm_d_or12_sel_o; wire wbm_d_or12_we_o; wire wbm_d_or12_cyc_o; wire wbm_d_or12_stb_o; wire [2:0] wbm_d_or12_cti_o; wire [1:0] wbm_d_or12_bte_o; wire [wb_dw-1:0] wbm_d_or12_dat_i; wire wbm_d_or12_ack_i; wire wbm_d_or12_err_i; wire wbm_d_or12_rty_i; // Debug interface bus wires wire [wb_aw-1:0] wbm_d_dbg_adr_o; wire [wb_dw-1:0] wbm_d_dbg_dat_o; wire [3:0] wbm_d_dbg_sel_o; wire wbm_d_dbg_we_o; wire wbm_d_dbg_cyc_o; wire wbm_d_dbg_stb_o; wire [2:0] wbm_d_dbg_cti_o; wire [1:0] wbm_d_dbg_bte_o; wire [wb_dw-1:0] wbm_d_dbg_dat_i; wire wbm_d_dbg_ack_i; wire wbm_d_dbg_err_i; wire wbm_d_dbg_rty_i; // Byte bus bridge master signals wire [wb_aw-1:0] wbm_b_d_adr_o; wire [wb_dw-1:0] wbm_b_d_dat_o; wire [3:0] wbm_b_d_sel_o; wire wbm_b_d_we_o; wire wbm_b_d_cyc_o; wire wbm_b_d_stb_o; wire [2:0] wbm_b_d_cti_o; wire [1:0] wbm_b_d_bte_o; wire [wb_dw-1:0] wbm_b_d_dat_i; wire wbm_b_d_ack_i; wire wbm_b_d_err_i; wire wbm_b_d_rty_i; // Instruction bus slave wires // // rom0 instruction bus wires wire [31:0] wbs_i_rom0_adr_i; wire [wbs_i_rom0_data_width-1:0] wbs_i_rom0_dat_i; wire [3:0] wbs_i_rom0_sel_i; wire wbs_i_rom0_we_i; wire wbs_i_rom0_cyc_i; wire wbs_i_rom0_stb_i; wire [2:0] wbs_i_rom0_cti_i; wire [1:0] wbs_i_rom0_bte_i; wire [wbs_i_rom0_data_width-1:0] wbs_i_rom0_dat_o; wire wbs_i_rom0_ack_o; wire wbs_i_rom0_err_o; wire wbs_i_rom0_rty_o; // mc0 instruction bus wires wire [31:0] wbs_i_mc0_adr_i; wire [31:0] wbs_i_mc0_dat_i; wire [3:0] wbs_i_mc0_sel_i; wire wbs_i_mc0_we_i; wire wbs_i_mc0_cyc_i; wire wbs_i_mc0_stb_i; wire [2:0] wbs_i_mc0_cti_i; wire [1:0] wbs_i_mc0_bte_i; wire [31:0] wbs_i_mc0_dat_o; wire wbs_i_mc0_ack_o; wire wbs_i_mc0_err_o; wire wbs_i_mc0_rty_o; // Data bus slave wires // // mc0 data bus wires wire [31:0] wbs_d_mc0_adr_i; wire [31:0] wbs_d_mc0_dat_i; wire [3:0] wbs_d_mc0_sel_i; wire wbs_d_mc0_we_i; wire wbs_d_mc0_cyc_i; wire wbs_d_mc0_stb_i; wire [2:0] wbs_d_mc0_cti_i; wire [1:0] wbs_d_mc0_bte_i; wire [31:0] wbs_d_mc0_dat_o; wire wbs_d_mc0_ack_o; wire wbs_d_mc0_err_o; wire wbs_d_mc0_rty_o; // memory parity error handler wires wire [31:0] wbs_d_peh_adr_i; wire [7:0] wbs_d_peh_dat_i; wire [3:0] wbs_d_peh_sel_i; wire wbs_d_peh_we_i; wire wbs_d_peh_cyc_i; wire wbs_d_peh_stb_i; wire [2:0] wbs_d_peh_cti_i; wire [1:0] wbs_d_peh_bte_i; wire [7:0] wbs_d_peh_dat_o; wire wbs_d_peh_ack_o; wire wbs_d_peh_err_o; wire wbs_d_peh_rty_o; // // Wishbone instruction bus arbiter // arbiter_ibus arbiter_ibus0 ( // Instruction Bus Master // Inputs to arbiter from master .wbm_adr_o (wbm_i_or12_adr_o), .wbm_dat_o (wbm_i_or12_dat_o), .wbm_sel_o (wbm_i_or12_sel_o), .wbm_we_o (wbm_i_or12_we_o), .wbm_cyc_o (wbm_i_or12_cyc_o), .wbm_stb_o (wbm_i_or12_stb_o), .wbm_cti_o (wbm_i_or12_cti_o), .wbm_bte_o (wbm_i_or12_bte_o), // Outputs to master from arbiter .wbm_dat_i (wbm_i_or12_dat_i), .wbm_ack_i (wbm_i_or12_ack_i), .wbm_err_i (wbm_i_or12_err_i), .wbm_rty_i (wbm_i_or12_rty_i), // Slave 0 // Inputs to slave from arbiter .wbs0_adr_i (wbs_i_rom0_adr_i), .wbs0_dat_i (wbs_i_rom0_dat_i), .wbs0_sel_i (wbs_i_rom0_sel_i), .wbs0_we_i (wbs_i_rom0_we_i), .wbs0_cyc_i (wbs_i_rom0_cyc_i), .wbs0_stb_i (wbs_i_rom0_stb_i), .wbs0_cti_i (wbs_i_rom0_cti_i), .wbs0_bte_i (wbs_i_rom0_bte_i), // Outputs from slave to arbiter .wbs0_dat_o (wbs_i_rom0_dat_o), .wbs0_ack_o (wbs_i_rom0_ack_o), .wbs0_err_o (wbs_i_rom0_err_o), .wbs0_rty_o (wbs_i_rom0_rty_o), // Slave 1 // Inputs to slave from arbiter .wbs1_adr_i (wbs_i_mc0_adr_i), .wbs1_dat_i (wbs_i_mc0_dat_i), .wbs1_sel_i (wbs_i_mc0_sel_i), .wbs1_we_i (wbs_i_mc0_we_i), .wbs1_cyc_i (wbs_i_mc0_cyc_i), .wbs1_stb_i (wbs_i_mc0_stb_i), .wbs1_cti_i (wbs_i_mc0_cti_i), .wbs1_bte_i (wbs_i_mc0_bte_i), // Outputs from slave to arbiter .wbs1_dat_o (wbs_i_mc0_dat_o), .wbs1_ack_o (wbs_i_mc0_ack_o), .wbs1_err_o (wbs_i_mc0_err_o), .wbs1_rty_o (wbs_i_mc0_rty_o), // Clock, reset inputs .wb_clk (wb_clk), .wb_rst (wb_rst)); defparam arbiter_ibus0.wb_addr_match_width = ibus_arb_addr_match_width; defparam arbiter_ibus0.slave0_adr = ibus_arb_slave0_adr; // ROM defparam arbiter_ibus0.slave1_adr = ibus_arb_slave1_adr; // Main memory // // Wishbone data bus arbiter // arbiter_dbus arbiter_dbus0 ( // Master 0 // Inputs to arbiter from master .wbm0_adr_o (wbm_d_or12_adr_o), .wbm0_dat_o (wbm_d_or12_dat_o), .wbm0_sel_o (wbm_d_or12_sel_o), .wbm0_we_o (wbm_d_or12_we_o), .wbm0_cyc_o (wbm_d_or12_cyc_o), .wbm0_stb_o (wbm_d_or12_stb_o), .wbm0_cti_o (wbm_d_or12_cti_o), .wbm0_bte_o (wbm_d_or12_bte_o), // Outputs to master from arbiter .wbm0_dat_i (wbm_d_or12_dat_i), .wbm0_ack_i (wbm_d_or12_ack_i), .wbm0_err_i (wbm_d_or12_err_i), .wbm0_rty_i (wbm_d_or12_rty_i), // Master 0 // Inputs to arbiter from master .wbm1_adr_o (wbm_d_dbg_adr_o), .wbm1_dat_o (wbm_d_dbg_dat_o), .wbm1_we_o (wbm_d_dbg_we_o), .wbm1_cyc_o (wbm_d_dbg_cyc_o), .wbm1_sel_o (wbm_d_dbg_sel_o), .wbm1_stb_o (wbm_d_dbg_stb_o), .wbm1_cti_o (wbm_d_dbg_cti_o), .wbm1_bte_o (wbm_d_dbg_bte_o), // Outputs to master from arbiter .wbm1_dat_i (wbm_d_dbg_dat_i), .wbm1_ack_i (wbm_d_dbg_ack_i), .wbm1_err_i (wbm_d_dbg_err_i), .wbm1_rty_i (wbm_d_dbg_rty_i), // Slaves .wbs0_adr_i (wbs_d_mc0_adr_i), .wbs0_dat_i (wbs_d_mc0_dat_i), .wbs0_sel_i (wbs_d_mc0_sel_i), .wbs0_we_i (wbs_d_mc0_we_i), .wbs0_cyc_i (wbs_d_mc0_cyc_i), .wbs0_stb_i (wbs_d_mc0_stb_i), .wbs0_cti_i (wbs_d_mc0_cti_i), .wbs0_bte_i (wbs_d_mc0_bte_i), .wbs0_dat_o (wbs_d_mc0_dat_o), .wbs0_ack_o (wbs_d_mc0_ack_o), .wbs0_err_o (wbs_d_mc0_err_o), .wbs0_rty_o (wbs_d_mc0_rty_o), .wbs1_adr_i (wbm_b_d_adr_o), .wbs1_dat_i (wbm_b_d_dat_o), .wbs1_sel_i (wbm_b_d_sel_o), .wbs1_we_i (wbm_b_d_we_o), .wbs1_cyc_i (wbm_b_d_cyc_o), .wbs1_stb_i (wbm_b_d_stb_o), .wbs1_cti_i (wbm_b_d_cti_o), .wbs1_bte_i (wbm_b_d_bte_o), .wbs1_dat_o (wbm_b_d_dat_i), .wbs1_ack_o (wbm_b_d_ack_i), .wbs1_err_o (wbm_b_d_err_i), .wbs1_rty_o (wbm_b_d_rty_i), // Clock, reset inputs .wb_clk (wb_clk), .wb_rst (wb_rst)); // These settings are from top level params file defparam arbiter_dbus0.wb_addr_match_width = dbus_arb_wb_addr_match_width; defparam arbiter_dbus0.wb_num_slaves = dbus_arb_wb_num_slaves; defparam arbiter_dbus0.slave0_adr = dbus_arb_slave0_adr; defparam arbiter_dbus0.slave1_adr = dbus_arb_slave1_adr; // // Wishbone byte-wide bus arbiter // arbiter_bytebus arbiter_bytebus0 ( // Master 0 // Inputs to arbiter from master .wbm0_adr_o (wbm_b_d_adr_o), .wbm0_dat_o (wbm_b_d_dat_o), .wbm0_sel_o (wbm_b_d_sel_o), .wbm0_we_o (wbm_b_d_we_o), .wbm0_cyc_o (wbm_b_d_cyc_o), .wbm0_stb_o (wbm_b_d_stb_o), .wbm0_cti_o (wbm_b_d_cti_o), .wbm0_bte_o (wbm_b_d_bte_o), // Outputs to master from arbiter .wbm0_dat_i (wbm_b_d_dat_i), .wbm0_ack_i (wbm_b_d_ack_i), .wbm0_err_i (wbm_b_d_err_i), .wbm0_rty_i (wbm_b_d_rty_i), // Byte bus slaves .wbs0_adr_i (wbs_d_peh_adr_i), .wbs0_dat_i (wbs_d_peh_dat_i), .wbs0_we_i (wbs_d_peh_we_i), .wbs0_cyc_i (wbs_d_peh_cyc_i), .wbs0_stb_i (wbs_d_peh_stb_i), .wbs0_cti_i (wbs_d_peh_cti_i), .wbs0_bte_i (wbs_d_peh_bte_i), .wbs0_dat_o (wbs_d_peh_dat_o), .wbs0_ack_o (wbs_d_peh_ack_o), .wbs0_err_o (wbs_d_peh_err_o), .wbs0_rty_o (wbs_d_peh_rty_o), // Clock, reset inputs .wb_clk (wb_clk), .wb_rst (wb_rst)); defparam arbiter_bytebus0.wb_addr_match_width = bbus_arb_wb_addr_match_width; defparam arbiter_bytebus0.wb_num_slaves = bbus_arb_wb_num_slaves; defparam arbiter_bytebus0.slave0_adr = bbus_arb_slave0_adr; `ifdef JTAG_DEBUG //////////////////////////////////////////////////////////////////////// // // JTAG TAP // //////////////////////////////////////////////////////////////////////// // // Wires // wire dbg_if_select; wire dbg_if_tdo; wire jtag_tap_tdo; wire jtag_tap_shift_dr, jtag_tap_pause_dr, jtag_tap_update_dr, jtag_tap_capture_dr; // // Instantiation // jtag_tap jtag_tap0 ( // Ports to pads .tdo_pad_o (tdo_pad_o), .tms_pad_i (tms_pad_i), .tck_pad_i (dbg_tck), .trst_pad_i (async_rst), .tdi_pad_i (tdi_pad_i), .tdo_padoe_o (), .tdo_o (jtag_tap_tdo), .shift_dr_o (jtag_tap_shift_dr), .pause_dr_o (jtag_tap_pause_dr), .update_dr_o (jtag_tap_update_dr), .capture_dr_o (jtag_tap_capture_dr), .extest_select_o (), .sample_preload_select_o (), .mbist_select_o (), .debug_select_o (dbg_if_select), .bs_chain_tdi_i (1'b0), .mbist_tdi_i (1'b0), .debug_tdi_i (dbg_if_tdo) ); //////////////////////////////////////////////////////////////////////// `endif // `ifdef JTAG_DEBUG //////////////////////////////////////////////////////////////////////// // // OpenRISC processor // //////////////////////////////////////////////////////////////////////// // // Wires // wire [19:0] or1200_pic_ints; wire [31:0] or1200_dbg_dat_i; wire [31:0] or1200_dbg_adr_i; wire or1200_dbg_we_i; wire or1200_dbg_stb_i; wire or1200_dbg_ack_o; wire [31:0] or1200_dbg_dat_o; wire or1200_dbg_stall_i; wire or1200_dbg_ewt_i; wire [3:0] or1200_dbg_lss_o; wire [1:0] or1200_dbg_is_o; wire [10:0] or1200_dbg_wp_o; wire or1200_dbg_bp_o; wire or1200_dbg_rst; wire or1200_clk, or1200_rst; wire sig_tick; wire [8:0] or1200_mem_parity_err; wire parity_err_reset; wire or1200_wb_rst; // // Assigns // assign or1200_clk = wb_clk; assign or1200_rst = wb_rst | or1200_dbg_rst | parity_err_reset; assign or1200_wb_rst = wb_rst | or1200_dbg_rst | parity_err_reset; // // Instantiation // or1200_top or1200_top0 ( // Instruction bus, clocks, reset .iwb_clk_i (wb_clk), .iwb_rst_i (or1200_wb_rst), .iwb_ack_i (wbm_i_or12_ack_i), .iwb_err_i (wbm_i_or12_err_i), .iwb_rty_i (wbm_i_or12_rty_i), .iwb_dat_i (wbm_i_or12_dat_i), .iwb_cyc_o (wbm_i_or12_cyc_o), .iwb_adr_o (wbm_i_or12_adr_o), .iwb_stb_o (wbm_i_or12_stb_o), .iwb_we_o (wbm_i_or12_we_o), .iwb_sel_o (wbm_i_or12_sel_o), .iwb_dat_o (wbm_i_or12_dat_o), .iwb_cti_o (wbm_i_or12_cti_o), .iwb_bte_o (wbm_i_or12_bte_o), // Data bus, clocks, reset .dwb_clk_i (wb_clk), .dwb_rst_i (or1200_wb_rst), .dwb_ack_i (wbm_d_or12_ack_i), .dwb_err_i (wbm_d_or12_err_i), .dwb_rty_i (wbm_d_or12_rty_i), .dwb_dat_i (wbm_d_or12_dat_i), .dwb_cyc_o (wbm_d_or12_cyc_o), .dwb_adr_o (wbm_d_or12_adr_o), .dwb_stb_o (wbm_d_or12_stb_o), .dwb_we_o (wbm_d_or12_we_o), .dwb_sel_o (wbm_d_or12_sel_o), .dwb_dat_o (wbm_d_or12_dat_o), .dwb_cti_o (wbm_d_or12_cti_o), .dwb_bte_o (wbm_d_or12_bte_o), // Debug interface ports .dbg_stall_i (or1200_dbg_stall_i), //.dbg_ewt_i (or1200_dbg_ewt_i), .dbg_ewt_i (1'b0), .dbg_lss_o (or1200_dbg_lss_o), .dbg_is_o (or1200_dbg_is_o), .dbg_wp_o (or1200_dbg_wp_o), .dbg_bp_o (or1200_dbg_bp_o), .dbg_adr_i (or1200_dbg_adr_i), .dbg_we_i (or1200_dbg_we_i ), .dbg_stb_i (or1200_dbg_stb_i), .dbg_dat_i (or1200_dbg_dat_i), .dbg_dat_o (or1200_dbg_dat_o), .dbg_ack_o (or1200_dbg_ack_o), .pm_clksd_o (), .pm_dc_gate_o (), .pm_ic_gate_o (), .pm_dmmu_gate_o (), .pm_immu_gate_o (), .pm_tt_gate_o (), .pm_cpu_gate_o (), .pm_wakeup_o (), .pm_lvolt_o (), // Core clocks, resets .clk_i (or1200_clk), .rst_i (or1200_rst), .clmode_i (2'b00), // Interrupts .pic_ints_i (or1200_pic_ints), .sig_tick(sig_tick), /* .mbist_so_o (), .mbist_si_i (0), .mbist_ctrl_i (0), */ `ifdef OR1200_RAM_PARITY .mem_parity_err (or1200_mem_parity_err), `endif .pm_cpustall_i (1'b0) ); //////////////////////////////////////////////////////////////////////// `ifdef JTAG_DEBUG //////////////////////////////////////////////////////////////////////// // // OR1200 Debug Interface // //////////////////////////////////////////////////////////////////////// dbg_if dbg_if0 ( // OR1200 interface .cpu0_clk_i (or1200_clk), .cpu0_rst_o (or1200_dbg_rst), .cpu0_addr_o (or1200_dbg_adr_i), .cpu0_data_o (or1200_dbg_dat_i), .cpu0_stb_o (or1200_dbg_stb_i), .cpu0_we_o (or1200_dbg_we_i), .cpu0_data_i (or1200_dbg_dat_o), .cpu0_ack_i (or1200_dbg_ack_o), .cpu0_stall_o (or1200_dbg_stall_i), .cpu0_bp_i (or1200_dbg_bp_o), // TAP interface .tck_i (dbg_tck), .tdi_i (jtag_tap_tdo), .tdo_o (dbg_if_tdo), .rst_i (wb_rst), .shift_dr_i (jtag_tap_shift_dr), .pause_dr_i (jtag_tap_pause_dr), .update_dr_i (jtag_tap_update_dr), .debug_select_i (dbg_if_select), // Wishbone debug master .wb_clk_i (wb_clk), .wb_dat_i (wbm_d_dbg_dat_i), .wb_ack_i (wbm_d_dbg_ack_i), .wb_err_i (wbm_d_dbg_err_i), .wb_adr_o (wbm_d_dbg_adr_o), .wb_dat_o (wbm_d_dbg_dat_o), .wb_cyc_o (wbm_d_dbg_cyc_o), .wb_stb_o (wbm_d_dbg_stb_o), .wb_sel_o (wbm_d_dbg_sel_o), .wb_we_o (wbm_d_dbg_we_o ), .wb_cti_o (wbm_d_dbg_cti_o), .wb_cab_o (/* UNUSED */), .wb_bte_o (wbm_d_dbg_bte_o) ); //////////////////////////////////////////////////////////////////////// `else // !`ifdef JTAG_DEBUG assign or1200_dbg_rst = 0; assign wbm_d_dbg_adr_o = 0; assign wbm_d_dbg_dat_o = 0; assign wbm_d_dbg_cyc_o = 0; assign wbm_d_dbg_stb_o = 0; assign wbm_d_dbg_sel_o = 0; assign wbm_d_dbg_we_o = 0; assign wbm_d_dbg_cti_o = 0; assign wbm_d_dbg_bte_o = 0; assign or1200_dbg_adr_i = 0; assign or1200_dbg_dat_i = 0; assign or1200_dbg_stb_i = 0; assign or1200_dbg_we_i = 0; assign or1200_dbg_stall_i = 0; //////////////////////////////////////////////////////////////////////// `endif // !`ifdef JTAG_DEBUG `ifdef OR1200_RAM_PARITY //////////////////////////////////////////////////////////////////////// // // Parity error handler // //////////////////////////////////////////////////////////////////////// wire parity_err_int; parity_err_handler perrhndler ( .clk(wb_clk), .parity_err(or1200_mem_parity_err), .wb_rst(wb_rst), .reset(parity_err_reset), .interrupt(parity_err_int), .wb_dat_o(wbs_d_peh_dat_o), .wb_ack_o(wbs_d_peh_ack_o), .wb_stb_i(wbs_d_peh_stb_i) ); assign wbs_d_peh_err_o = 0; assign wbs_d_peh_rty_o = 0; `endif //////////////////////////////////////////////////////////////////////// // // ROM // //////////////////////////////////////////////////////////////////////// `ifdef BOOTROM rom rom0 ( .wb_dat_o (wbs_i_rom0_dat_o), .wb_ack_o (wbs_i_rom0_ack_o), .wb_adr_i (wbs_i_rom0_adr_i[(wbs_i_rom0_addr_width+2)-1:2]), .wb_stb_i (wbs_i_rom0_stb_i), .wb_cyc_i (wbs_i_rom0_cyc_i), .wb_cti_i (wbs_i_rom0_cti_i), .wb_bte_i (wbs_i_rom0_bte_i), .wb_clk (wb_clk), .wb_rst (wb_rst)); defparam rom0.addr_width = wbs_i_rom0_addr_width; `else // !`ifdef BOOTROM assign wbs_i_rom0_dat_o = 0; assign wbs_i_rom0_ack_o = 0; `endif // !`ifdef BOOTROM assign wbs_i_rom0_err_o = 0; assign wbs_i_rom0_rty_o = 0; //////////////////////////////////////////////////////////////////////// `ifdef RAM_WB //////////////////////////////////////////////////////////////////////// // // Generic main RAM // //////////////////////////////////////////////////////////////////////// ram_wb ram_wb0 ( // Wishbone slave interface 0 .wbm0_dat_i (wbs_i_mc0_dat_i), .wbm0_adr_i (wbs_i_mc0_adr_i), .wbm0_sel_i (wbs_i_mc0_sel_i), .wbm0_cti_i (wbs_i_mc0_cti_i), .wbm0_bte_i (wbs_i_mc0_bte_i), .wbm0_we_i (wbs_i_mc0_we_i ), .wbm0_cyc_i (wbs_i_mc0_cyc_i), .wbm0_stb_i (wbs_i_mc0_stb_i), .wbm0_dat_o (wbs_i_mc0_dat_o), .wbm0_ack_o (wbs_i_mc0_ack_o), .wbm0_err_o (wbs_i_mc0_err_o), .wbm0_rty_o (wbs_i_mc0_rty_o), // Wishbone slave interface 1 .wbm1_dat_i (wbs_d_mc0_dat_i), .wbm1_adr_i (wbs_d_mc0_adr_i), .wbm1_sel_i (wbs_d_mc0_sel_i), .wbm1_cti_i (wbs_d_mc0_cti_i), .wbm1_bte_i (wbs_d_mc0_bte_i), .wbm1_we_i (wbs_d_mc0_we_i ), .wbm1_cyc_i (wbs_d_mc0_cyc_i), .wbm1_stb_i (wbs_d_mc0_stb_i), .wbm1_dat_o (wbs_d_mc0_dat_o), .wbm1_ack_o (wbs_d_mc0_ack_o), .wbm1_err_o (wbs_d_mc0_err_o), .wbm1_rty_o (wbs_d_mc0_rty_o), // Wishbone slave interface 2 .wbm2_dat_i ('d0), .wbm2_adr_i ('d0), .wbm2_sel_i (4'd0), .wbm2_cti_i (3'd0), .wbm2_bte_i (2'd0), .wbm2_we_i (1'd0), .wbm2_cyc_i (1'd0), .wbm2_stb_i (1'd0), .wbm2_dat_o (), .wbm2_ack_o (), .wbm2_err_o (), .wbm2_rty_o (), // Clock, reset .wb_clk_i (wb_clk), .wb_rst_i (wb_rst)); defparam ram_wb0.aw = wb_aw; defparam ram_wb0.dw = wb_dw; defparam ram_wb0.mem_size_bytes = (1024*1024); // 1024MB defparam ram_wb0.mem_adr_width = 20; // log2(1024*1024) //////////////////////////////////////////////////////////////////////// `endif //////////////////////////////////////////////////////////////////////// // // OR1200 Interrupt assignment // //////////////////////////////////////////////////////////////////////// assign or1200_pic_ints[0] = 0; // Non-maskable inside OR1200 assign or1200_pic_ints[1] = 0; // Non-maskable inside OR1200 assign or1200_pic_ints[2] = 0; assign or1200_pic_ints[3] = 0; assign or1200_pic_ints[4] = 0; `ifdef OR1200_RAM_PARITY assign or1200_pic_ints[5] = parity_err_int; `else assign or1200_pic_ints[5] = 0; `endif `ifdef SPI0 assign or1200_pic_ints[6] = spi0_irq; `else assign or1200_pic_ints[6] = 0; `endif assign or1200_pic_ints[7] = 0; assign or1200_pic_ints[8] = 0; assign or1200_pic_ints[9] = 0; assign or1200_pic_ints[10] = 0; assign or1200_pic_ints[11] = 0; assign or1200_pic_ints[12] = 0; assign or1200_pic_ints[13] = 0; assign or1200_pic_ints[14] = 0; assign or1200_pic_ints[15] = 0; assign or1200_pic_ints[16] = 0; assign or1200_pic_ints[17] = 0; assign or1200_pic_ints[18] = 0; assign or1200_pic_ints[19] = 0; endmodule // top // Local Variables: // verilog-library-directories:("." "../arbiter" "../or1200" "../dbg_if" "../jtag_tap" "../rom" "../simple_spi" ) // verilog-library-files:() // verilog-library-extensions:(".v" ".h") // End: