URL https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [orpsocv2/] [boards/] [xilinx/] [atlys/] [backend/] [par/] [bin/] [atlys.ucf] - Rev 679

Go to most recent revision | Compare with Previous | Blame | View Log
## This file is a general .ucf for Atlys rev C board
## To use it in a project:
## - remove or comment the lines corresponding to unused pins
## - rename the used signals according to the project
#
#
CONFIG VCCAUX  = 3.3;
## clock pin for Atlys rev C board
 NET "sys_clk_in"   LOC = "L15"; # Bank = 1, Pin name = IO_L42P_GCLK7_M1UDM, Type = GCLK, Sch name = GCLK
#
## onBoard USB controller
# NET "EppAstb"   LOC = "B9";  # Bank = 0, Pin name = IO_L35P_GCLK17, Sch name = U1-FLAGA
# NET "EppDstb"   LOC = "A9";  # Bank = 0, Pin name = IO_L35N_GCLK16, Sch name = U1-FLAGB
# NET "UsbFlag"   LOC = "C15"; # Bank = 0, Pin name = IO_L64P_SCP5,      Sch name = U1-FLAGC
# NET "EppWait"   LOC = "F13"; # Bank = 0, Pin name = IO_L63P_SCP7,      Sch name = U1-SLRD
# NET "EppDB<0>"  LOC = "A2";  # Bank = 0, Pin name = IO_L2N,             Sch name = U1-FD0
# NET "EppDB<1>"  LOC = "D6";  # Bank = 0, Pin name = IO_L3P,            Sch name = U1-FD1
# NET "EppDB<2>"  LOC = "C6";  # Bank = 0, Pin name = IO_L3N,            Sch name = U1-FD2
# NET "EppDB<3>"  LOC = "B3";  # Bank = 0, Pin name = IO_L4P,            Sch name = U1-FD3
# NET "EppDB<4>"  LOC = "A3";  # Bank = 0, Pin name = IO_L4N,            Sch name = U1-FD4
# NET "EppDB<5>"  LOC = "B4";  # Bank = 0, Pin name = IO_L5P,            Sch name = U1-FD5
# NET "EppDB<6>"  LOC = "A4";  # Bank = 0, Pin name = IO_L5N,            Sch name = U1-FD6
# NET "EppDB<7>"  LOC = "C5";  # Bank = 0, Pin name = IO_L6P,            Sch name = U1-FD7
# 
# NET "UsbClk"   LOC = "C10"; # Bank = 0, Pin name = IO_L37P_GCLK13, Sch name = U1-IFCLK 
# NET "UsbOE"    LOC = "A15"; # Bank = 0, Pin name = IO_L64N_SCP4,       Sch name = U1-SLOE
# NET "UsbWR"    LOC = "E13"; # Bank = 0, Pin name = IO_L63N_SCP6,       Sch name = U1-SLWR
# NET "UsbPktEnd" LOC = "C4";  # Bank = 0, Pin name = IO_L1N_VREF,       Sch name = U1-PKTEND
# NET "UsbDir"   LOC = "B2";  # Bank = 0, Pin name = IO_L2P,             Sch name = U1-SLCS
# NET "UsbMode"          LOC = "A5";  # Bank = 0, Pin name = IO_L6N,             Sch name = U1-INT0#
# 
# NET "UsbAdr<0>" LOC = "A14"; # Bank = 0, Pin name = IO_L62N_VREF,       Sch name = U1-FIFOAD0
# NET "UsbAdr<1>" LOC = "B14"; # Bank = 0, Pin name = IO_L62P,           Sch name = U1-FIFOAD1
# 
## onBoard Quad-SPI Flash
 NET "spi0_sck_o"       LOC = "R15"; # Bank = 2, Pin name = IO_L1P_CCLK_2,                       Sch name = SCK
 NET "spi0_ss_o<0>"      LOC = "V3";  # Bank = 2, Pin name = IO_L65N_CSO_B_2,                     Sch name = CS
 NET "spi0_mosi_o"   LOC = "T13"; # Bank = 2, Pin name = IO_L3N_MOSI_CSI_B_MISO0_2,  Sch name = SDI
 NET "spi0_miso_i"   LOC = "R13"; # Bank = 2, Pin name = IO_L3P_D0_DIN_MISO_MISO1_2, Sch name = DQ1
# NET "FlashMemDq<2>" LOC = "T14"; # Bank = 2, Pin name = IO_L12P_D1_MISO2_2,            Sch name = DQ2
# NET "FlashMemDq<3>" LOC = "V14"; # Bank = 2, Pin name = IO_L12N_D2_MISO3_2,            Sch name = DQ3
#
## onBoard Leds
 NET "gpio0_io<0>" LOC = "U18"; # Bank = 1, Pin name = IO_L52N_M1DQ15,      Sch name = LD0
 NET "gpio0_io<1>" LOC = "M14"; # Bank = 1, Pin name = IO_L53P,                            Sch name = LD1
 NET "gpio0_io<2>" LOC = "N14"; # Bank = 1, Pin name = IO_L53N_VREF,       Sch name = LD2
 NET "gpio0_io<3>" LOC = "L14"; # Bank = 1, Pin name = IO_L61P,                            Sch name = LD3
 NET "gpio0_io<4>" LOC = "M13"; # Bank = 1, Pin name = IO_L61N,                            Sch name = LD4
 NET "gpio0_io<5>" LOC = "D4";  # Bank = 0, Pin name = IO_L1P_HSWAPEN_0,           Sch name = HSWAP/LD5
 NET "gpio0_io<6>" LOC = "P16"; # Bank = 1, Pin name = IO_L74N_DOUT_BUSY_1, Sch name = LD6
 NET "gpio0_io<7>" LOC = "N12"; # Bank = 2, Pin name = IO_L13P_M1_2,               Sch name = M1/LD7
# 
## onBoard PUSH BUTTONS 
 NET "rst_n_pad_i" LOC = "T15"; # Bank = 2, Pin name = IO_L1N_M0_CMPMISO_2, Sch name = M0/RESET
# NET "gpio0_io<16>" LOC = "N4";  # Bank = 3, Pin name = IO_L1P,                           Sch name = BTNU
# NET "gpio0_io<17>" LOC = "P4";  # Bank = 3, Pin name = IO_L2P,                           Sch name = BTNL
# NET "gpio0_io<18>" LOC = "P3";  # Bank = 3, Pin name = IO_L2N,                           Sch name = BTND
# NET "gpio0_io<19>" LOC = "F6";  # Bank = 3, Pin name = IO_L55P_M3A13,            Sch name = BTNR
# NET "gpio0_io<20>" LOC = "F5";  # Bank = 3, Pin name = IO_L55N_M3A14,            Sch name = BTNC
# 
## onBoard SWITCHES
# NET "gpio0_io<8>" LOC = "A10"; # Bank = 0, Pin name = IO_L37N_GCLK12,         Sch name = SW0
# NET "gpio0_io<9>" LOC = "D14"; # Bank = 0, Pin name = IO_L65P_SCP3,           Sch name = SW1
# NET "gpio0_io<10>" LOC = "C14"; # Bank = 0, Pin name = IO_L65N_SCP2,          Sch name = SW2
# NET "gpio0_io<11>" LOC = "P15"; # Bank = 1, Pin name = IO_L74P_AWAKE_1,       Sch name = SW3
# NET "gpio0_io<12>" LOC = "P12"; # Bank = 2, Pin name = IO_L13N_D10,                   Sch name = SW4
# NET "gpio0_io<13>" LOC = "R5";  # Bank = 2, Pin name = IO_L48P_D7,                    Sch name = SW5
# NET "gpio0_io<14>" LOC = "T5";  # Bank = 2, Pin name = IO_L48N_RDWR_B_VREF_2, Sch name = SW6
# NET "gpio0_io<15>" LOC = "E4";  # Bank = 3, Pin name = IO_L54P_M3RESET,       Sch name = SW7
#
## TEMAC Ethernet MAC
 NET "eth0_rst_n_o"    LOC = "G13"; # Bank = 1, Pin name = IO_L32N_A16_M1A9,             Sch name = E-RESET
 NET "eth0_tx_clk"  LOC = "K16"; # Bank = 1, Pin name = IO_L41N_GCLK8_M1CASN,       Sch name = E-TXCLK
 
 NET "eth0_tx_data<0>" LOC = "H16"; # Bank = 1, Pin name = IO_L37N_A6_M1A1,               Sch name = E-TXD0
 NET "eth0_tx_data<1>" LOC = "H13"; # Bank = 1, Pin name = IO_L36P_A9_M1BA0,             Sch name = E-TXD1
 NET "eth0_tx_data<2>" LOC = "K14"; # Bank = 1, Pin name = IO_L39N_M1ODT,                        Sch name = E-TXD2
 NET "eth0_tx_data<3>" LOC = "K13"; # Bank = 1, Pin name = IO_L34N_A12_M1BA2,            Sch name = E-TXD3
# NET "phyTXD<4>" LOC = "J13"; # Bank = 1, Pin name = IO_L39P_M1A3,                      Sch name = E-TXD4
# NET "phyTXD<5>" LOC = "G14"; # Bank = 1, Pin name = IO_L30N_A20_M1A11,         Sch name = E-TXD5
# NET "phyTXD<6>" LOC = "H12"; # Bank = 1, Pin name = IO_L32P_A17_M1A8,          Sch name = E-TXD6
# NET "phyTXD<7>" LOC = "K12"; # Bank = 1, Pin name = IO_L34P_A13_M1WE,          Sch name = E-TXD7
# 
 NET "eth0_tx_en"   LOC = "H15"; # Bank = 1, Pin name = IO_L37P_A7_M1A0,         Sch name = E-TXEN
 NET "eth0_tx_er"   LOC = "G18"; # Bank = 1, Pin name = IO_L38N_A4_M1CLKN,               Sch name = E-TXER
# NET "phygtxclk" LOC = "L12"; # Bank = 1, Pin name = IO_L40P_GCLK11_M1A5,        Sch name = E-GTXCLK
 
 NET "eth0_rx_data<0>" LOC = "G16"; # Bank = 1, Pin name = IO_L38P_A5_M1CLK,              Sch name = E-RXD0
 NET "eth0_rx_data<1>" LOC = "H14"; # Bank = 1, Pin name = IO_L36N_A8_M1BA1,             Sch name = E-RXD1
 NET "eth0_rx_data<2>" LOC = "E16"; # Bank = 1, Pin name = IO_L33P_A15_M1A10,            Sch name = E-RXD2
 NET "eth0_rx_data<3>" LOC = "F15"; # Bank = 1, Pin name = IO_L1P_A25,                           Sch name = E-RXD3
# NET "phyRXD<4>" LOC = "F14"; # Bank = 1, Pin name = IO_L30P_A21_M1RESET,        Sch name = E-RXD4
# NET "phyRXD<5>" LOC = "E18"; # Bank = 1, Pin name = IO_L33N_A14_M1A4,          Sch name = E-RXD5
# NET "phyRXD<6>" LOC = "D18"; # Bank = 1, Pin name = IO_L31N_A18_M1A12,         Sch name = E-RXD6
# NET "phyRXD<7>" LOC = "D17"; # Bank = 1, Pin name = IO_L31P_A19_M1CKE,         Sch name = E-RXD7
 
 NET "eth0_dv"   LOC = "F17"; # Bank = 1, Pin name = IO_L35P_A11_M1A7,           Sch name = E-RXDV
 NET "eth0_rx_er"   LOC = "F18"; # Bank = 1, Pin name = IO_L35N_A10_M1A2,           Sch name = E-RXER
 NET "eth0_rx_clk"  LOC = "K15"; # Bank = 1, Pin name = IO_L41P_GCLK9_IRDY1_M1RASN, Sch name = E-RXCLK
 NET "eth0_mdc_pad_o"    LOC = "F16"; # Bank = 1, Pin name = IO_L1N_A24_VREF,            Sch name = E-MDC
 NET "eth0_md_pad_io"    LOC = "N17"; # Bank = 1, Pin name = IO_L48P_HDC_M1DQ8,          Sch name = E-MDIO
 NET "eth0_col"       LOC = "C17"; # Bank = 1, Pin name = IO_L29P_A23_M1A13, Sch name = E-COL
 NET "eth0_crs"        LOC = "C18"; # Bank = 1, Pin name = IO_L29N_A22_M1A14, Sch name = E-CRS

# NET "phyint"    LOC = "L16"; # Bank = 1, Pin name = IO_L42N_GCLK6_TRDY1_M1LDM,  Sch name = E-INT
#
## DDR2
############################################################################
## I/O TERMINATION                                                          
############################################################################
NET "ddr2_dq[*]"                                 IN_TERM = NONE;
NET "ddr2_dqs"                                   IN_TERM = NONE;
NET "ddr2_dqs_n"                                 IN_TERM = NONE;
NET "ddr2_udqs"                                  IN_TERM = NONE;
NET "ddr2_udqs_n"                                IN_TERM = NONE;

############################################################################
# I/O STANDARDS 
############################################################################
NET  "ddr2_dq[*]"                               IOSTANDARD = SSTL18_II;
NET  "ddr2_a[*]"                                IOSTANDARD = SSTL18_II;
NET  "ddr2_ba[*]"                               IOSTANDARD = SSTL18_II;
NET  "ddr2_dqs"                                 IOSTANDARD = DIFF_SSTL18_II;
NET  "ddr2_udqs"                                IOSTANDARD = DIFF_SSTL18_II;
NET  "ddr2_dqs_n"                               IOSTANDARD = DIFF_SSTL18_II;
NET  "ddr2_udqs_n"                              IOSTANDARD = DIFF_SSTL18_II;
NET  "ddr2_ck"                                  IOSTANDARD = DIFF_SSTL18_II;
NET  "ddr2_ck_n"                                IOSTANDARD = DIFF_SSTL18_II;
NET  "ddr2_cke"                                 IOSTANDARD = SSTL18_II;
NET  "ddr2_ras_n"                               IOSTANDARD = SSTL18_II;
NET  "ddr2_cas_n"                               IOSTANDARD = SSTL18_II;
NET  "ddr2_we_n"                                IOSTANDARD = SSTL18_II;
NET  "ddr2_odt"                                 IOSTANDARD = SSTL18_II;
NET  "ddr2_dm"                                  IOSTANDARD = SSTL18_II;
NET  "ddr2_udm"                                 IOSTANDARD = SSTL18_II;
NET  "ddr2_rzq"                                      IOSTANDARD = SSTL18_II;
NET  "ddr2_zio"                                      IOSTANDARD = SSTL18_II;
#NET  "c3_sys_clk"                                  IOSTANDARD = LVCMOS25;
#NET  "c3_sys_rst_n"                                IOSTANDARD = LVCMOS18;
 NET "ddr2_ck"       LOC = "G3"; # Bank = 3, Pin name = IO_L46P_M3CLK,                    Sch name = DDR-CK_P
 NET "ddr2_ck_n"     LOC = "G1"; # Bank = 3, Pin name = IO_L46N_M3CLKN,                   Sch name = DDR-CK_N
 NET "ddr2_cke"      LOC = "H7"; # Bank = 3, Pin name = IO_L53P_M3CKE,                    Sch name = DDR-CKE
 NET "ddr2_ras_n"    LOC = "L5"; # Bank = 3, Pin name = IO_L43P_GCLK23_M3RASN,            Sch name = DDR-RAS
 NET "ddr2_cas_n"    LOC = "K5"; # Bank = 3, Pin name = IO_L43N_GCLK22_IRDY2_M3CASN, Sch name = DDR-CAS
 NET "ddr2_we_n"     LOC = "E3"; # Bank = 3, Pin name = IO_L50P_M3WE,                             Sch name = DDR-WE
 NET "ddr2_rzq"      LOC = "L6"; # Bank = 3, Pin name = IO_L31P,                                  Sch name = RZQ
 NET "ddr2_zio"      LOC = "C2"; # Bank = 3, Pin name = IO_L83P,                                  Sch name = ZIO
 NET "ddr2_ba<0>"    LOC = "F2"; # Bank = 3, Pin name = IO_L48P_M3BA0,                     Sch name = DDR-BA0
 NET "ddr2_ba<1>"    LOC = "F1"; # Bank = 3, Pin name = IO_L48N_M3BA1,                    Sch name = DDR-BA1
 NET "ddr2_ba<2>"    LOC = "E1"; # Bank = 3, Pin name = IO_L50N_M3BA2,                    Sch name = DDR-BA2
 NET "ddr2_a<0>"     LOC = "J7"; # Bank = 3, Pin name = IO_L47P_M3A0,                      Sch name = DDR-A0
 NET "ddr2_a<1>"     LOC = "J6"; # Bank = 3, Pin name = IO_L47N_M3A1,                     Sch name = DDR-A1
 NET "ddr2_a<2>"     LOC = "H5"; # Bank = 3, Pin name = IO_L49N_M3A2,                             Sch name = DDR-A2
 NET "ddr2_a<3>"     LOC = "L7"; # Bank = 3, Pin name = IO_L45P_M3A3,                             Sch name = DDR-A3
 NET "ddr2_a<4>"     LOC = "F3"; # Bank = 3, Pin name = IO_L51N_M3A4,                             Sch name = DDR-A4
 NET "ddr2_a<5>"     LOC = "H4"; # Bank = 3, Pin name = IO_L44P_GCLK21_M3A5,              Sch name = DDR-A5
 NET "ddr2_a<6>"     LOC = "H3"; # Bank = 3, Pin name = IO_L44N_GCLK20_M3A6,              Sch name = DDR-A6
 NET "ddr2_a<7>"     LOC = "H6"; # Bank = 3, Pin name = IO_L49P_M3A7,                             Sch name = DDR-A7
 NET "ddr2_a<8>"     LOC = "D2"; # Bank = 3, Pin name = IO_L52P_M3A8,                             Sch name = DDR-A8
 NET "ddr2_a<9>"     LOC = "D1"; # Bank = 3, Pin name = IO_L52N_M3A9,                             Sch name = DDR-A9
 NET "ddr2_a<10>"    LOC = "F4"; # Bank = 3, Pin name = IO_L51P_M3A10,                    Sch name = DDR-A10
 NET "ddr2_a<11>"    LOC = "D3"; # Bank = 3, Pin name = IO_L54N_M3A11,                            Sch name = DDR-A11
 NET "ddr2_a<12>"    LOC = "G6"; # Bank = 3, Pin name = IO_L53N_M3A12,                    Sch name = DDR-A12
 NET "ddr2_dq<0>"    LOC = "L2"; # Bank = 3, Pin name = IO_L37P_M3DQ0,                     Sch name = DDR-DQ0
 NET "ddr2_dq<1>"    LOC = "L1"; # Bank = 3, Pin name = IO_L37N_M3DQ1,                    Sch name = DDR-DQ1
 NET "ddr2_dq<2>"    LOC = "K2"; # Bank = 3, Pin name = IO_L38P_M3DQ2,                    Sch name = DDR-DQ2
 NET "ddr2_dq<3>"    LOC = "K1"; # Bank = 3, Pin name = IO_L38N_M3DQ3,                    Sch name = DDR-DQ3
 NET "ddr2_dq<4>"    LOC = "H2"; # Bank = 3, Pin name = IO_L41P_GCLK27_M3DQ4,        Sch name = DDR-DQ4
 NET "ddr2_dq<5>"    LOC = "H1"; # Bank = 3, Pin name = IO_L41N_GCLK26_M3DQ5,        Sch name = DDR-DQ5
 NET "ddr2_dq<6>"    LOC = "J3"; # Bank = 3, Pin name = IO_L40P_M3DQ6,                    Sch name = DDR-DQ6
 NET "ddr2_dq<7>"    LOC = "J1"; # Bank = 3, Pin name = IO_L40N_M3DQ7,                    Sch name = DDR-DQ7
 NET "ddr2_dq<8>"    LOC = "M3"; # Bank = 3, Pin name = IO_L36P_M3DQ8,                            Sch name = DDR-DQ8
 NET "ddr2_dq<9>"    LOC = "M1"; # Bank = 3, Pin name = IO_L36N_M3DQ9,                    Sch name = DDR-DQ9
 NET "ddr2_dq<10>"   LOC = "N2"; # Bank = 3, Pin name = IO_L35P_M3DQ10,           Sch name = DDR-DQ10
 NET "ddr2_dq<11>"   LOC = "N1"; # Bank = 3, Pin name = IO_L35N_M3DQ11,           Sch name = DDR-DQ11
 NET "ddr2_dq<12>"   LOC = "T2"; # Bank = 3, Pin name = IO_L33P_M3DQ12,                   Sch name = DDR-DQ12
 NET "ddr2_dq<13>"   LOC = "T1"; # Bank = 3, Pin name = IO_L33N_M3DQ13,                   Sch name = DDR-DQ13
 NET "ddr2_dq<14>"   LOC = "U2"; # Bank = 3, Pin name = IO_L32P_M3DQ14,           Sch name = DDR-DQ14
 NET "ddr2_dq<15>"   LOC = "U1"; # Bank = 3, Pin name = IO_L32N_M3DQ15,           Sch name = DDR-DQ15
 NET "ddr2_udqs"     LOC="P2"; # Bank = 3, Pin name = IO_L34P_M3UDQS,                     Sch name = DDR-UDQS_P
 NET "ddr2_udqs_n"   LOC="P1"; # Bank = 3, Pin name = IO_L34N_M3UDQSN,                    Sch name = DDR-UDQS_N
 NET "ddr2_dqs"      LOC="L4"; # Bank = 3, Pin name = IO_L39P_M3LDQS,                     Sch name = DDR-LDQS_P
 NET "ddr2_dqs_n"    LOC="L3"; # Bank = 3, Pin name = IO_L39N_M3LDQSN,                    Sch name = DDR-LDQS_N
 NET "ddr2_dm"       LOC="K3"; # Bank = 3, Pin name = IO_L42N_GCLK24_M3LDM,          Sch name = DDR-LDM
 NET "ddr2_udm"      LOC="K4"; # Bank = 3, Pin name = IO_L42P_GCLK25_TRDY2_M3UDM,         Sch name = DDR-UDM
 NET "ddr2_odt"      LOC="K6"; # Bank = 3, Pin name = IO_L45N_M3ODT,                      Sch name = DDR-ODT

## onboard HDMI OUT
# NET "HDMIOUTCLKP" LOC = "B6"; # Bank = 0, Pin name = IO_L8P,            Sch name = TMDS-TX-CLK_P
# NET "HDMIOUTCLKN" LOC = "A6"; # Bank = 0, Pin name = IO_L8N_VREF,       Sch name = TMDS-TX-CLK_N
# NET "HDMIOUTD0P"  LOC = "D8"; # Bank = 0, Pin name = IO_L11P,           Sch name = TMDS-TX-0_P
# NET "HDMIOUTD0N"  LOC = "C8"; # Bank = 0, Pin name = IO_L11N,           Sch name = TMDS-TX-0_N
# NET "HDMIOUTD1P"  LOC = "C7"; # Bank = 0, Pin name = IO_L10P,           Sch name = TMDS-TX-1_P
# NET "HDMIOUTD1N"  LOC = "A7"; # Bank = 0, Pin name = IO_L10N,           Sch name = TMDS-TX-1_N
# NET "HDMIOUTD2P"  LOC = "B8"; # Bank = 0, Pin name = IO_L33P,           Sch name = TMDS-TX-2_P
# NET "HDMIOUTD2N"  LOC = "A8"; # Bank = 0, Pin name = IO_L33N,           Sch name = TMDS-TX-2_N
# NET "HDMIOUTSCL"  LOC = "D9"; # Bank = 0, Pin name = IO_L34P_GCLK19, Sch name = TMDS-TX-SCL
# NET "HDMIOUTSDA"  LOC = "C9"; # Bank = 0, Pin name = IO_L34N_GCLK18, Sch name = TMDS-TX-SDA
#
## onboard HDMI IN1 (PMODA)
# NET "HDMIIN1CLKP" LOC = "D11"; # Bank = 0, Pin name = IO_L36P_GCLK15, Sch name = TMDS-RXB-CLK_P
# NET "HDMIIN1CLKN" LOC = "C11"; # Bank = 0, Pin name = IO_L36N_GCLK14, Sch name = TMDS-RXB-CLK_N
# NET "HDMIIN1D0P"  LOC = "G9";  # Bank = 0, Pin name = IO_L38P,                   Sch name = TMDS-RXB-0_P
# NET "HDMIIN1D0N"  LOC = "F9";  # Bank = 0, Pin name = IO_L38N_VREF,   Sch name = TMDS-RXB-0_N
# NET "HDMIIN1D1P"  LOC = "B11"; # Bank = 0, Pin name = IO_L39P,        Sch name = TMDS-RXB-1_P
# NET "HDMIIN1D1N"  LOC = "A11"; # Bank = 0, Pin name = O_L39N,         Sch name = TMDS-RXB-1_N
# NET "HDMIIN1D2P"  LOC = "B12"; # Bank = 0, Pin name = IO_L41P,        Sch name = TMDS-RXB-2_P
# NET "HDMIIN1D2N"  LOC = "A12"; # Bank = 0, Pin name = IO_L41N,        Sch name = TMDS-RXB-2_N
# NET "HDMIIN1SCL"  LOC = "C13"; # Bank = 0, Pin name = IO_L50P,        Sch name = PMOD-SCL
# NET "HDMIIN1SDA"  LOC = "A13"; # Bank = 0, Pin name = IO_L50N,        Sch name = PMOD-SDA
#
## onboard HDMI IN2
# NET "HDMIIN2CLKP" LOC = "H17"; # Bank = 1, Pin name = IO_L43P_GCLK5_M1DQ4, Sch name = TMDS-RX-CLK_P
# NET "HDMIIN2CLKN" LOC = "H18"; # Bank = 1, Pin name = IO_L43N_GCLK4_M1DQ5, Sch name = TMDS-RX-CLK_N
# NET "HDMIIN2D0P"  LOC = "K17"; # Bank = 1, Pin name = IO_L45P_A1_M1LDQS,   Sch name = TMDS-RX-0_P
# NET "HDMIIN2D0N"  LOC = "K18"; # Bank = 1, Pin name = IO_L45N_A0_M1LDQSN,  Sch name = TMDS-RX-0_N
# NET "HDMIIN2D1P"  LOC = "L17"; # Bank = 1, Pin name = IO_L46P_FCS_B_M1DQ2, Sch name = TMDS-RX-1_P
# NET "HDMIIN2D1N"  LOC = "L18"; # Bank = 1, Pin name = IO_L46N_FOE_B_M1DQ3, Sch name = TMDS-RX-1_N
# NET "HDMIIN2D2P"  LOC = "J16"; # Bank = 1, Pin name = IO_L44P_A3_M1DQ6,    Sch name = TMDS-RX-2_P
# NET "HDMIIN2D2N"  LOC = "J18"; # Bank = 1, Pin name = IO_L44N_A2_M1DQ7,    Sch name = TMDS-RX-2_N
# NET "HDMIIN2SCL"  LOC = "M16"; # Bank = 1, Pin name = IO_L47P_FWE_B_M1DQ0, Sch name = TMDS-RX-SCL
# NET "HDMIIN2SDA"  LOC = "M18"; # Bank = 1, Pin name = IO_L47N_LDC_M1DQ1,   Sch name = TMDS-RX-SDA
#
## onboard USB Host Controller
# NET "USBCLK" LOC = "P17"; # Bank = 1, Pin name = IO_L49P_M1DQ10, Sch name = PIC32-SCK1
# NET "USBSS"  LOC = "P18"; # Bank = 1, Pin name = IO_L49N_M1DQ11, Sch name = PIC32-SS1
# NET "USBSDI" LOC = "N15"; # Bank = 1, Pin name = IO_L50P_M1UDQS, Sch name = PIC32-SDI1
# NET "USBSDO" LOC = "N18"; # Bank = 1, Pin name = IO_L48N_M1DQ9,  Sch name = PIC32-SDO1
# 
## Audio
# NET "BITCLK"   LOC = "L13"; # Bank = 1, Pin name = IO_L40N_GCLK10_M1A6, Sch name = AUD-BIT-CLK
# NET "AUDSDI"   LOC = "T18"; # Bank = 1, Pin name = IO_L51N_M1DQ13,      Sch name = AUD-SDI
# NET "AUDSDO"   LOC = "N16"; # Bank = 1, Pin name = IO_L50N_M1UDQSN,     Sch name = AUD-SDO
# NET "AUDSYNC"  LOC = "U17"; # Bank = 1, Pin name = IO_L52P_M1DQ14,      Sch name = AUD-SYNC
# NET "AUDRST"   LOC = "T17"; # Bank = 1, Pin name = IO_L51P_M1DQ12,      Sch name = AUD-RESET
# 
## PMOD Connector
# NET "JB<0>"  LOC = "T3"; # Bank = 2,  Pin name = IO_L62N_D6,     Sch name = JA-D0_N
# NET "JB<1>"  LOC = "R3"; # Bank = 2,  Pin name = IO_L62P_D5,     Sch name = JA-D0_P
# NET "JB<2>"  LOC = "P6"; # Bank = 2,  Pin name = IO_L64N_D9,     Sch name = JA-D2_N
# NET "JB<3>"  LOC = "N5"; # Bank = 2,  Pin name = IO_L64P_D8,     Sch name = JA-D2_P
# NET "JB<4>"  LOC = "V9"; # Bank = 2,  Pin name = IO_L32N_GCLK28, Sch name = JA-CLK_N
# NET "JB<5>"  LOC = "T9"; # Bank = 2,  Pin name = IO_L32P_GCLK29, Sch name = JA-CLK_P
# NET "JB<6>"  LOC = "V4"; # Bank = 2,  Pin name = IO_L63N,        Sch name = JA-D1_N
# NET "JB<7>"  LOC = "T4"; # Bank = 2,  Pin name = IO_L63P,        Sch name = JA-D1_P
#
## onboard VHDCI
## Channnel 1 connects to P signals, Channel 2 to N signals
# NET "VHDCIIO1<0>"  LOC = "U16"; # Bank = 2,  Pin name = IO_L2P_CMPCLK,         Sch name = EXP-IO1_P
# NET "VHDCIIO1<1>"  LOC = "U15"; # Bank = 2,  Pin name = *IO_L5P,                      Sch name = EXP-IO2_P
# NET "VHDCIIO1<2>"  LOC = "U13"; # Bank = 2,  Pin name = IO_L14P_D11,          Sch name = EXP-IO3_P
# NET "VHDCIIO1<3>"  LOC = "M11"; # Bank = 2,  Pin name = *IO_L15P,                     Sch name = EXP-IO4_P
# NET "VHDCIIO1<4>"  LOC = "R11"; # Bank = 2,  Pin name = IO_L16P,                      Sch name = EXP-IO5_P
# NET "VHDCIIO1<5>"  LOC = "T12"; # Bank = 2,  Pin name = *IO_L19P,                     Sch name = EXP-IO6_P
# NET "VHDCIIO1<6>"  LOC = "N10"; # Bank = 2,  Pin name = *IO_L20P,                     Sch name = EXP-IO7_P
# NET "VHDCIIO1<7>"  LOC = "M10"; # Bank = 2,  Pin name = *IO_L22P,                     Sch name = EXP-IO8_P
# NET "VHDCIIO1<8>"  LOC = "U11"; # Bank = 2,  Pin name = IO_L23P,                      Sch name = EXP-IO9_P
# NET "VHDCIIO1<9>"  LOC = "R10"; # Bank = 2,  Pin name = IO_L29P_GCLK3,                Sch name = EXP-IO10_P
# NET "VHDCIIO1<10>" LOC = "U10"; # Bank = 2,  Pin name = IO_L30P_GCLK1_D13,      Sch name = EXP-IO11_P
# NET "VHDCIIO1<11>" LOC = "R8";  # Bank = 2,  Pin name = IO_L31P_GCLK31_D14,     Sch name = EXP-IO12_P
# NET "VHDCIIO1<12>" LOC = "M8";  # Bank = 2,  Pin name = *IO_L40P,                     Sch name = EXP-IO13_P
# NET "VHDCIIO1<13>" LOC = "U8";  # Bank = 2,  Pin name = IO_L41P,                      Sch name = EXP-IO14_P
# NET "VHDCIIO1<14>" LOC = "U7";  # Bank = 2,  Pin name = IO_L43P,                      Sch name = EXP-IO15_P
# NET "VHDCIIO1<15>" LOC = "N7";  # Bank = 2,  Pin name = *IO_L44P,                     Sch name = EXP-IO16_P
# NET "VHDCIIO1<16>" LOC = "T6";  # Bank = 2,  Pin name = IO_L45P,                      Sch name = EXP-IO17_P
# NET "VHDCIIO1<17>" LOC = "R7";  # Bank = 2,  Pin name = IO_L46P,                      Sch name = EXP-IO18_P
# NET "VHDCIIO1<18>" LOC = "N6";  # Bank = 2,  Pin name = *IO_L47P,                     Sch name = EXP-IO19_P
# NET "VHDCIIO1<19>" LOC = "U5";  # Bank = 2,  Pin name = IO_49P_D3,                    Sch name = EXP-IO20_P
#
# NET "VHDCIIO2<0>"  LOC = "V16"; # Bank = 2,  Pin name = IO_L2N_CMPMOSI,                Sch name = EXP-IO1_N
# NET "VHDCIIO2<1>"  LOC = "V15"; # Bank = 2,  Pin name = *IO_L5N,                      Sch name = EXP-IO2_N
# NET "VHDCIIO2<2>"  LOC = "V13"; # Bank = 2,  Pin name = IO_L14N_D12,          Sch name = EXP-IO3_N
# NET "VHDCIIO2<3>"  LOC = "N11"; # Bank = 2,  Pin name = *IO_L15N,                     Sch name = EXP-IO4_N
# NET "VHDCIIO2<4>"  LOC = "T11"; # Bank = 2,  Pin name = IO_L16N_VREF,         Sch name = EXP-IO5_N
# NET "VHDCIIO2<5>"  LOC = "V12"; # Bank = 2,  Pin name = *IO_L19N,                     Sch name = EXP-IO6_N
# NET "VHDCIIO2<6>"  LOC = "P11"; # Bank = 2,  Pin name = *IO_L20N,                     Sch name = EXP-IO7_N
# NET "VHDCIIO2<7>"  LOC = "N9";  # Bank = 2,  Pin name = *IO_L22N,                     Sch name = EXP-IO8_N
# NET "VHDCIIO2<8>"  LOC = "V11"; # Bank = 2,  Pin name = IO_L23N,                      Sch name = EXP-IO9_N
# NET "VHDCIIO2<9>"  LOC = "T10"; # Bank = 2,  Pin name = IO_L29N_GCLK2,          Sch name = EXP-IO10_N
# NET "VHDCIIO2<10>" LOC = "V10"; # Bank = 2,  Pin name = IO_L30N_GCLK0_USERCCLK, Sch name = EXP-IO11_N
# NET "VHDCIIO2<11>" LOC = "T8";  # Bank = 2,  Pin name = IO_L31N_GCLK30_D15,     Sch name = EXP-IO12_N
# NET "VHDCIIO2<12>" LOC = "N8";  # Bank = 2,  Pin name = *IO_L40N,                     Sch name = EXP-IO13_N
# NET "VHDCIIO2<13>" LOC = "V8";  # Bank = 2,  Pin name = IO_L41N_VREF,         Sch name = EXP-IO14_N
# NET "VHDCIIO2<14>" LOC = "V7";  # Bank = 2,  Pin name = IO_L43N,                      Sch name = EXP-IO15_N
# NET "VHDCIIO2<15>" LOC = "P8";  # Bank = 2,  Pin name = *IO_L44N,                     Sch name = EXP-IO16_N
# NET "VHDCIIO2<16>" LOC = "V6";  # Bank = 2,  Pin name = IO_L45N,                      Sch name = EXP-IO17_N
# NET "VHDCIIO2<17>" LOC = "T7";  # Bank = 2,  Pin name = IO_L46N,                      Sch name = EXP-IO18_N
# NET "VHDCIIO2<18>" LOC = "P7";  # Bank = 2,  Pin name = *IO_L47N,                     Sch name = EXP-IO19_N
# NET "VHDCIIO2<19>" LOC = "V5";  # Bank = 2,  Pin name = IO_49N_D4,                    Sch name = EXP-IO20_N 
# 
## USB UART Connector
 NET "uart0_srx_pad_i" LOC = "A16"; # Bank = 0, Pin name = IO_L66N_SCP0, Sch name = USBB-RXD
 NET "uart0_stx_pad_o" LOC = "B16"; # Bank = 0, Pin name = IO_L66P_SCP1, Sch name = USBB-TXD
#
#
# Constraints

NET "sys_clk_in" TNM_NET = "sys_clk_in";
TIMESPEC TS_sys_clk_in = PERIOD "sys_clk_in" 100 MHz HIGH 50 %;

NET "wb_clk" TNM_NET = "wb_clk";
TIMESPEC TS_wb_clk = PERIOD "wb_clk" 50 MHz high 50%;

NET rst_n_pad_i TIG;

NET "gpio0_io<*>" TIG;

# ethernet constraints
NET eth0_rst_n_o      TIG;

NET "eth0_tx_clk" TNM_NET = "eth0_tx_clk";
TIMESPEC TS_eth0_tx_clk = PERIOD "eth0_tx_clk" 25 MHz high 50%;

NET "eth0_rx_clk" TNM_NET = "eth0_rx_clk";
TIMESPEC TS_eth0_rx_clk = PERIOD "eth0_rx_clk" 25 MHz high 50%;

# DDR2 Constraints 
NET "xilinx_ddr2_0/xilinx_ddr2_if0/ddr2_mig/memc?_wrapper_inst/mcb_ui_top_inst/mcb_raw_wrapper_inst/selfrefresh_mcb_mode" TIG;
NET "xilinx_ddr2_0/xilinx_ddr2_if0/ddr2_mig/c?_pll_lock" TIG;
     
NET "xilinx_ddr2_0/xilinx_ddr2_if0/ddr2_mig/memc?_wrapper_inst/mcb_ui_top_inst/mcb_raw_wrapper_inst/gen_term_calib.mcb_soft_calibration_top_inst/mcb_soft_calibration_inst/CKE_Train" TIG; ##This path exists for DDR2 only

NET "xilinx_ddr2_0/xilinx_ddr2_if0/ddr2_mig/memc3_infrastructure_inst/sys_clk_ibufg" TNM_NET = "SYS_CLK3";
TIMESPEC "TS_SYS_CLK3" = PERIOD "SYS_CLK3"  3.75  ns HIGH 50 %;
Go to most recent revision | Compare with Previous | Blame | View Log
Browse

Tools

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [orpsocv2/] [boards/] [xilinx/] [atlys/] [backend/] [par/] [bin/] [atlys.ucf] - Rev 679
