URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [orpsocv2/] [boards/] [xilinx/] [atlys/] [rtl/] [verilog/] [xilinx_ddr2/] [memc_wrapper.v] - Rev 724
Go to most recent revision | Compare with Previous | Blame | View Log
//***************************************************************************** // (c) Copyright 2009-10 Xilinx, Inc. All rights reserved. // // This file contains confidential and proprietary information // of Xilinx, Inc. and is protected under U.S. and // international copyright and other intellectual property // laws. // // DISCLAIMER // This disclaimer is not a license and does not grant any // rights to the materials distributed herewith. Except as // otherwise provided in a valid license issued to you by // Xilinx, and to the maximum extent permitted by applicable // law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND // WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES // AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING // BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- // INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and // (2) Xilinx shall not be liable (whether in contract or tort, // including negligence, or under any other theory of // liability) for any loss or damage of any kind or nature // related to, arising under or in connection with these // materials, including for any direct, or any indirect, // special, incidental, or consequential loss or damage // (including loss of data, profits, goodwill, or any type of // loss or damage suffered as a result of any action brought // by a third party) even if such damage or loss was // reasonably foreseeable or Xilinx had been advised of the // possibility of the same. // // CRITICAL APPLICATIONS // Xilinx products are not designed or intended to be fail- // safe, or for use in any application requiring fail-safe // performance, such as life-support or safety devices or // systems, Class III medical devices, nuclear facilities, // applications related to the deployment of airbags, or any // other applications that could lead to death, personal // injury, or severe property or environmental damage // (individually and collectively, "Critical // Applications"). Customer assumes the sole risk and // liability of any use of Xilinx products in Critical // Applications, subject only to applicable laws and // regulations governing limitations on product liability. // // THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS // PART OF THIS FILE AT ALL TIMES. // //***************************************************************************** // ____ ____ // / /\/ / // /___/ \ / Vendor : Xilinx // \ \ \/ Application : MIG // \ \ Filename : memc_wrapper.v // / / Date Last Modified : $Date: 2010/08/ // /___/ /\ Date Created : Mon Mar 2 2009 // \ \ / \ // \___\/\___\ // //Device : Spartan-6 //Design Name : DDR/DDR2/DDR3/LPDDR //Purpose : This is a static top level module instantiating the mcb_ui_top, // which provides interface to all the standard as well as AXI ports. // This module memc_wrapper provides interface to only the standard ports. //Reference : //Revision History : //***************************************************************************** `timescale 1ns/1ps module memc_wrapper # ( parameter C_MEMCLK_PERIOD = 2500, parameter C_P0_MASK_SIZE = 4, parameter C_P0_DATA_PORT_SIZE = 32, parameter C_P1_MASK_SIZE = 4, parameter C_P1_DATA_PORT_SIZE = 32, parameter C_PORT_ENABLE = 6'b111111, parameter C_PORT_CONFIG = "B128", parameter C_MEM_ADDR_ORDER = "BANK_ROW_COLUMN", // The following parameter reflects the GUI selection of the Arbitration algorithm. // Zero value corresponds to round robin algorithm and one to custom selection. // The parameter is used to calculate the arbitration time slot parameters. parameter C_ARB_ALGORITHM = 0, parameter C_ARB_NUM_TIME_SLOTS = 12, parameter C_ARB_TIME_SLOT_0 = 18'o012345, parameter C_ARB_TIME_SLOT_1 = 18'o123450, parameter C_ARB_TIME_SLOT_2 = 18'o234501, parameter C_ARB_TIME_SLOT_3 = 18'o345012, parameter C_ARB_TIME_SLOT_4 = 18'o450123, parameter C_ARB_TIME_SLOT_5 = 18'o501234, parameter C_ARB_TIME_SLOT_6 = 18'o012345, parameter C_ARB_TIME_SLOT_7 = 18'o123450, parameter C_ARB_TIME_SLOT_8 = 18'o234501, parameter C_ARB_TIME_SLOT_9 = 18'o345012, parameter C_ARB_TIME_SLOT_10 = 18'o450123, parameter C_ARB_TIME_SLOT_11 = 18'o501234, parameter C_MEM_TRAS = 45000, parameter C_MEM_TRCD = 12500, parameter C_MEM_TREFI = 7800, parameter C_MEM_TRFC = 127500, parameter C_MEM_TRP = 12500, parameter C_MEM_TWR = 15000, parameter C_MEM_TRTP = 7500, parameter C_MEM_TWTR = 7500, parameter C_NUM_DQ_PINS = 8, parameter C_MEM_TYPE = "DDR3", parameter C_MEM_DENSITY = "512M", parameter C_MEM_BURST_LEN = 8, parameter C_MEM_CAS_LATENCY = 4, parameter C_MEM_ADDR_WIDTH = 13, parameter C_MEM_BANKADDR_WIDTH = 3, parameter C_MEM_NUM_COL_BITS = 11, parameter C_MEM_DDR3_CAS_LATENCY = 7, parameter C_MEM_MOBILE_PA_SR = "FULL", parameter C_MEM_DDR1_2_ODS = "FULL", parameter C_MEM_DDR3_ODS = "DIV6", parameter C_MEM_DDR2_RTT = "50OHMS", parameter C_MEM_DDR3_RTT = "DIV2", parameter C_MEM_MDDR_ODS = "FULL", parameter C_MEM_DDR2_DIFF_DQS_EN = "YES", parameter C_MEM_DDR2_3_PA_SR = "OFF", parameter C_MEM_DDR3_CAS_WR_LATENCY = 5, parameter C_MEM_DDR3_AUTO_SR = "ENABLED", parameter C_MEM_DDR2_3_HIGH_TEMP_SR = "NORMAL", parameter C_MEM_DDR3_DYN_WRT_ODT = "OFF", parameter C_MC_CALIB_BYPASS = "NO", parameter LDQSP_TAP_DELAY_VAL = 0, parameter UDQSP_TAP_DELAY_VAL = 0, parameter LDQSN_TAP_DELAY_VAL = 0, parameter UDQSN_TAP_DELAY_VAL = 0, parameter DQ0_TAP_DELAY_VAL = 0, parameter DQ1_TAP_DELAY_VAL = 0, parameter DQ2_TAP_DELAY_VAL = 0, parameter DQ3_TAP_DELAY_VAL = 0, parameter DQ4_TAP_DELAY_VAL = 0, parameter DQ5_TAP_DELAY_VAL = 0, parameter DQ6_TAP_DELAY_VAL = 0, parameter DQ7_TAP_DELAY_VAL = 0, parameter DQ8_TAP_DELAY_VAL = 0, parameter DQ9_TAP_DELAY_VAL = 0, parameter DQ10_TAP_DELAY_VAL = 0, parameter DQ11_TAP_DELAY_VAL = 0, parameter DQ12_TAP_DELAY_VAL = 0, parameter DQ13_TAP_DELAY_VAL = 0, parameter DQ14_TAP_DELAY_VAL = 0, parameter DQ15_TAP_DELAY_VAL = 0, parameter C_CALIB_SOFT_IP = "TRUE", parameter C_SIMULATION = "FALSE", parameter C_SKIP_IN_TERM_CAL = 1'b0, parameter C_SKIP_DYNAMIC_CAL = 1'b0, parameter C_MC_CALIBRATION_MODE = "CALIBRATION", parameter C_MC_CALIBRATION_DELAY = "HALF" ) ( // Raw Wrapper Signals input sysclk_2x, input sysclk_2x_180, input pll_ce_0, input pll_ce_90, input pll_lock, input async_rst, input mcb_drp_clk, output [C_MEM_ADDR_WIDTH-1:0] mcbx_dram_addr, output [C_MEM_BANKADDR_WIDTH-1:0] mcbx_dram_ba, output mcbx_dram_ras_n, output mcbx_dram_cas_n, output mcbx_dram_we_n, output mcbx_dram_cke, output mcbx_dram_clk, output mcbx_dram_clk_n, inout [C_NUM_DQ_PINS-1:0] mcbx_dram_dq, inout mcbx_dram_dqs, inout mcbx_dram_dqs_n, inout mcbx_dram_udqs, inout mcbx_dram_udqs_n, output mcbx_dram_udm, output mcbx_dram_ldm, output mcbx_dram_odt, output mcbx_dram_ddr3_rst, inout mcbx_rzq, inout mcbx_zio, output calib_done, input selfrefresh_enter, output selfrefresh_mode, // This new memc_wrapper shows all the six logical static user ports. The port // configuration parameter and the port enable parameter are the ones that // determine the active and non-active ports. The following list shows the // default active ports for each port configuration. // // Config 1: "B32_B32_X32_X32_X32_X32" // User port 0 --> 32 bit, User port 1 --> 32 bit // User port 2 --> 32 bit, User port 3 --> 32 bit // User port 4 --> 32 bit, User port 5 --> 32 bit // Config 2: "B32_B32_B32_B32" // User port 0 --> 32 bit // User port 1 --> 32 bit // User port 2 --> 32 bit // User port 3 --> 32 bit // Config 3: "B64_B32_B3" // User port 0 --> 64 bit // User port 1 --> 32 bit // User port 2 --> 32 bit // Config 4: "B64_B64" // User port 0 --> 64 bit // User port 1 --> 64 bit // Config 5 "B128" // User port 0 --> 128 bit // User Port-0 command interface will be active only when the port is enabled in // the port configurations Config-1, Config-2, Config-3, Config-4 and Config-5 input p0_cmd_clk, input p0_cmd_en, input [2:0] p0_cmd_instr, input [5:0] p0_cmd_bl, input [29:0] p0_cmd_byte_addr, output p0_cmd_full, output p0_cmd_empty, // User Port-0 data write interface will be active only when the port is enabled in // the port configurations Config-1, Config-2, Config-3, Config-4 and Config-5 input p0_wr_clk, input p0_wr_en, input [C_P0_MASK_SIZE-1:0] p0_wr_mask, input [C_P0_DATA_PORT_SIZE-1:0] p0_wr_data, output p0_wr_full, output [6:0] p0_wr_count, output p0_wr_empty, output p0_wr_underrun, output p0_wr_error, // User Port-0 data read interface will be active only when the port is enabled in // the port configurations Config-1, Config-2, Config-3, Config-4 and Config-5 input p0_rd_clk, input p0_rd_en, output [C_P0_DATA_PORT_SIZE-1:0] p0_rd_data, output p0_rd_empty, output [6:0] p0_rd_count, output p0_rd_full, output p0_rd_overflow, output p0_rd_error, // User Port-1 command interface will be active only when the port is enabled in // the port configurations Config-1, Config-2, Config-3 and Config-4 input p1_cmd_clk, input p1_cmd_en, input [2:0] p1_cmd_instr, input [5:0] p1_cmd_bl, input [29:0] p1_cmd_byte_addr, output p1_cmd_full, output p1_cmd_empty, // User Port-1 data write interface will be active only when the port is enabled in // the port configurations Config-1, Config-2, Config-3 and Config-4 input p1_wr_clk, input p1_wr_en, input [C_P1_MASK_SIZE-1:0] p1_wr_mask, input [C_P1_DATA_PORT_SIZE-1:0] p1_wr_data, output p1_wr_full, output [6:0] p1_wr_count, output p1_wr_empty, output p1_wr_underrun, output p1_wr_error, // User Port-1 data read interface will be active only when the port is enabled in // the port configurations Config-1, Config-2, Config-3 and Config-4 input p1_rd_clk, input p1_rd_en, output [C_P1_DATA_PORT_SIZE-1:0] p1_rd_data, output p1_rd_empty, output [6:0] p1_rd_count, output p1_rd_full, output p1_rd_overflow, output p1_rd_error, // User Port-2 command interface will be active only when the port is enabled in // the port configurations Config-1, Config-2 and Config-3 input p2_cmd_clk, input p2_cmd_en, input [2:0] p2_cmd_instr, input [5:0] p2_cmd_bl, input [29:0] p2_cmd_byte_addr, output p2_cmd_full, output p2_cmd_empty, // User Port-2 data write interface will be active only when the port is enabled in // the port configurations Config-1 write direction, Config-2 and Config-3 input p2_wr_clk, input p2_wr_en, input [3:0] p2_wr_mask, input [31:0] p2_wr_data, output p2_wr_full, output [6:0] p2_wr_count, output p2_wr_empty, output p2_wr_underrun, output p2_wr_error, // User Port-2 data read interface will be active only when the port is enabled in // the port configurations Config-1 read direction, Config-2 and Config-3 input p2_rd_clk, input p2_rd_en, output [31:0] p2_rd_data, output p2_rd_empty, output [6:0] p2_rd_count, output p2_rd_full, output p2_rd_overflow, output p2_rd_error, // User Port-3 command interface will be active only when the port is enabled in // the port configurations Config-1 and Config-2 input p3_cmd_clk, input p3_cmd_en, input [2:0] p3_cmd_instr, input [5:0] p3_cmd_bl, input [29:0] p3_cmd_byte_addr, output p3_cmd_full, output p3_cmd_empty, // User Port-3 data write interface will be active only when the port is enabled in // the port configurations Config-1 write direction and Config-2 input p3_wr_clk, input p3_wr_en, input [3:0] p3_wr_mask, input [31:0] p3_wr_data, output p3_wr_full, output [6:0] p3_wr_count, output p3_wr_empty, output p3_wr_underrun, output p3_wr_error, // User Port-3 data read interface will be active only when the port is enabled in // the port configurations Config-1 read direction and Config-2 input p3_rd_clk, input p3_rd_en, output [31:0] p3_rd_data, output p3_rd_empty, output [6:0] p3_rd_count, output p3_rd_full, output p3_rd_overflow, output p3_rd_error, // User Port-4 command interface will be active only when the port is enabled in // the port configuration Config-1 input p4_cmd_clk, input p4_cmd_en, input [2:0] p4_cmd_instr, input [5:0] p4_cmd_bl, input [29:0] p4_cmd_byte_addr, output p4_cmd_full, output p4_cmd_empty, // User Port-4 data write interface will be active only when the port is enabled in // the port configuration Config-1 write direction input p4_wr_clk, input p4_wr_en, input [3:0] p4_wr_mask, input [31:0] p4_wr_data, output p4_wr_full, output [6:0] p4_wr_count, output p4_wr_empty, output p4_wr_underrun, output p4_wr_error, // User Port-4 data read interface will be active only when the port is enabled in // the port configuration Config-1 read direction input p4_rd_clk, input p4_rd_en, output [31:0] p4_rd_data, output p4_rd_empty, output [6:0] p4_rd_count, output p4_rd_full, output p4_rd_overflow, output p4_rd_error, // User Port-5 command interface will be active only when the port is enabled in // the port configuration Config-1 input p5_cmd_clk, input p5_cmd_en, input [2:0] p5_cmd_instr, input [5:0] p5_cmd_bl, input [29:0] p5_cmd_byte_addr, output p5_cmd_full, output p5_cmd_empty, // User Port-5 data write interface will be active only when the port is enabled in // the port configuration Config-1 write direction input p5_wr_clk, input p5_wr_en, input [3:0] p5_wr_mask, input [31:0] p5_wr_data, output p5_wr_full, output [6:0] p5_wr_count, output p5_wr_empty, output p5_wr_underrun, output p5_wr_error, // User Port-5 data read interface will be active only when the port is enabled in // the port configuration Config-1 read direction input p5_rd_clk, input p5_rd_en, output [31:0] p5_rd_data, output p5_rd_empty, output [6:0] p5_rd_count, output p5_rd_full, output p5_rd_overflow, output p5_rd_error ); localparam C_MC_CALIBRATION_CLK_DIV = 1; localparam C_MEM_TZQINIT_MAXCNT = 10'd512 + 10'd16; // 16 clock cycles are added to avoid trfc violations localparam C_SKIP_DYN_IN_TERM = 1'b1; localparam C_MC_CALIBRATION_RA = 16'h0000; localparam C_MC_CALIBRATION_BA = 3'h0; localparam C_MC_CALIBRATION_CA = 12'h000; // All the following new localparams and signals are added to support // the AXI slave interface. They have no function to play in a standard // interface design and can be ignored. localparam C_S0_AXI_ID_WIDTH = 4; localparam C_S0_AXI_ADDR_WIDTH = 64; localparam C_S0_AXI_DATA_WIDTH = 32; localparam C_S1_AXI_ID_WIDTH = 4; localparam C_S1_AXI_ADDR_WIDTH = 64; localparam C_S1_AXI_DATA_WIDTH = 32; localparam C_S2_AXI_ID_WIDTH = 4; localparam C_S2_AXI_ADDR_WIDTH = 64; localparam C_S2_AXI_DATA_WIDTH = 32; localparam C_S3_AXI_ID_WIDTH = 4; localparam C_S3_AXI_ADDR_WIDTH = 64; localparam C_S3_AXI_DATA_WIDTH = 32; localparam C_S4_AXI_ID_WIDTH = 4; localparam C_S4_AXI_ADDR_WIDTH = 64; localparam C_S4_AXI_DATA_WIDTH = 32; localparam C_S5_AXI_ID_WIDTH = 4; localparam C_S5_AXI_ADDR_WIDTH = 64; localparam C_S5_AXI_DATA_WIDTH = 32; localparam C_MCB_USE_EXTERNAL_BUFPLL = 1; // AXI wire declarations // AXI interface of the mcb_ui_top module is connected to the following // floating wires in all the standard interface designs. wire s0_axi_aclk; wire s0_axi_aresetn; wire [C_S0_AXI_ID_WIDTH-1:0] s0_axi_awid; wire [C_S0_AXI_ADDR_WIDTH-1:0] s0_axi_awaddr; wire [7:0] s0_axi_awlen; wire [2:0] s0_axi_awsize; wire [1:0] s0_axi_awburst; wire [0:0] s0_axi_awlock; wire [3:0] s0_axi_awcache; wire [2:0] s0_axi_awprot; wire [3:0] s0_axi_awqos; wire s0_axi_awvalid; wire s0_axi_awready; wire [C_S0_AXI_DATA_WIDTH-1:0] s0_axi_wdata; wire [C_S0_AXI_DATA_WIDTH/8-1:0] s0_axi_wstrb; wire s0_axi_wlast; wire s0_axi_wvalid; wire s0_axi_wready; wire [C_S0_AXI_ID_WIDTH-1:0] s0_axi_bid; wire [1:0] s0_axi_bresp; wire s0_axi_bvalid; wire s0_axi_bready; wire [C_S0_AXI_ID_WIDTH-1:0] s0_axi_arid; wire [C_S0_AXI_ADDR_WIDTH-1:0] s0_axi_araddr; wire [7:0] s0_axi_arlen; wire [2:0] s0_axi_arsize; wire [1:0] s0_axi_arburst; wire [0:0] s0_axi_arlock; wire [3:0] s0_axi_arcache; wire [2:0] s0_axi_arprot; wire [3:0] s0_axi_arqos; wire s0_axi_arvalid; wire s0_axi_arready; wire [C_S0_AXI_ID_WIDTH-1:0] s0_axi_rid; wire [C_S0_AXI_DATA_WIDTH-1:0] s0_axi_rdata; wire [1:0] s0_axi_rresp; wire s0_axi_rlast; wire s0_axi_rvalid; wire s0_axi_rready; wire s1_axi_aclk; wire s1_axi_aresetn; wire [C_S1_AXI_ID_WIDTH-1:0] s1_axi_awid; wire [C_S1_AXI_ADDR_WIDTH-1:0] s1_axi_awaddr; wire [7:0] s1_axi_awlen; wire [2:0] s1_axi_awsize; wire [1:0] s1_axi_awburst; wire [0:0] s1_axi_awlock; wire [3:0] s1_axi_awcache; wire [2:0] s1_axi_awprot; wire [3:0] s1_axi_awqos; wire s1_axi_awvalid; wire s1_axi_awready; wire [C_S1_AXI_DATA_WIDTH-1:0] s1_axi_wdata; wire [C_S1_AXI_DATA_WIDTH/8-1:0] s1_axi_wstrb; wire s1_axi_wlast; wire s1_axi_wvalid; wire s1_axi_wready; wire [C_S1_AXI_ID_WIDTH-1:0] s1_axi_bid; wire [1:0] s1_axi_bresp; wire s1_axi_bvalid; wire s1_axi_bready; wire [C_S1_AXI_ID_WIDTH-1:0] s1_axi_arid; wire [C_S1_AXI_ADDR_WIDTH-1:0] s1_axi_araddr; wire [7:0] s1_axi_arlen; wire [2:0] s1_axi_arsize; wire [1:0] s1_axi_arburst; wire [0:0] s1_axi_arlock; wire [3:0] s1_axi_arcache; wire [2:0] s1_axi_arprot; wire [3:0] s1_axi_arqos; wire s1_axi_arvalid; wire s1_axi_arready; wire [C_S1_AXI_ID_WIDTH-1:0] s1_axi_rid; wire [C_S1_AXI_DATA_WIDTH-1:0] s1_axi_rdata; wire [1:0] s1_axi_rresp; wire s1_axi_rlast; wire s1_axi_rvalid; wire s1_axi_rready; wire s2_axi_aclk; wire s2_axi_aresetn; wire [C_S2_AXI_ID_WIDTH-1:0] s2_axi_awid; wire [C_S2_AXI_ADDR_WIDTH-1:0] s2_axi_awaddr; wire [7:0] s2_axi_awlen; wire [2:0] s2_axi_awsize; wire [1:0] s2_axi_awburst; wire [0:0] s2_axi_awlock; wire [3:0] s2_axi_awcache; wire [2:0] s2_axi_awprot; wire [3:0] s2_axi_awqos; wire s2_axi_awvalid; wire s2_axi_awready; wire [C_S2_AXI_DATA_WIDTH-1:0] s2_axi_wdata; wire [C_S2_AXI_DATA_WIDTH/8-1:0] s2_axi_wstrb; wire s2_axi_wlast; wire s2_axi_wvalid; wire s2_axi_wready; wire [C_S2_AXI_ID_WIDTH-1:0] s2_axi_bid; wire [1:0] s2_axi_bresp; wire s2_axi_bvalid; wire s2_axi_bready; wire [C_S2_AXI_ID_WIDTH-1:0] s2_axi_arid; wire [C_S2_AXI_ADDR_WIDTH-1:0] s2_axi_araddr; wire [7:0] s2_axi_arlen; wire [2:0] s2_axi_arsize; wire [1:0] s2_axi_arburst; wire [0:0] s2_axi_arlock; wire [3:0] s2_axi_arcache; wire [2:0] s2_axi_arprot; wire [3:0] s2_axi_arqos; wire s2_axi_arvalid; wire s2_axi_arready; wire [C_S2_AXI_ID_WIDTH-1:0] s2_axi_rid; wire [C_S2_AXI_DATA_WIDTH-1:0] s2_axi_rdata; wire [1:0] s2_axi_rresp; wire s2_axi_rlast; wire s2_axi_rvalid; wire s2_axi_rready; wire s3_axi_aclk; wire s3_axi_aresetn; wire [C_S3_AXI_ID_WIDTH-1:0] s3_axi_awid; wire [C_S3_AXI_ADDR_WIDTH-1:0] s3_axi_awaddr; wire [7:0] s3_axi_awlen; wire [2:0] s3_axi_awsize; wire [1:0] s3_axi_awburst; wire [0:0] s3_axi_awlock; wire [3:0] s3_axi_awcache; wire [2:0] s3_axi_awprot; wire [3:0] s3_axi_awqos; wire s3_axi_awvalid; wire s3_axi_awready; wire [C_S3_AXI_DATA_WIDTH-1:0] s3_axi_wdata; wire [C_S3_AXI_DATA_WIDTH/8-1:0] s3_axi_wstrb; wire s3_axi_wlast; wire s3_axi_wvalid; wire s3_axi_wready; wire [C_S3_AXI_ID_WIDTH-1:0] s3_axi_bid; wire [1:0] s3_axi_bresp; wire s3_axi_bvalid; wire s3_axi_bready; wire [C_S3_AXI_ID_WIDTH-1:0] s3_axi_arid; wire [C_S3_AXI_ADDR_WIDTH-1:0] s3_axi_araddr; wire [7:0] s3_axi_arlen; wire [2:0] s3_axi_arsize; wire [1:0] s3_axi_arburst; wire [0:0] s3_axi_arlock; wire [3:0] s3_axi_arcache; wire [2:0] s3_axi_arprot; wire [3:0] s3_axi_arqos; wire s3_axi_arvalid; wire s3_axi_arready; wire [C_S3_AXI_ID_WIDTH-1:0] s3_axi_rid; wire [C_S3_AXI_DATA_WIDTH-1:0] s3_axi_rdata; wire [1:0] s3_axi_rresp; wire s3_axi_rlast; wire s3_axi_rvalid; wire s3_axi_rready; wire s4_axi_aclk; wire s4_axi_aresetn; wire [C_S4_AXI_ID_WIDTH-1:0] s4_axi_awid; wire [C_S4_AXI_ADDR_WIDTH-1:0] s4_axi_awaddr; wire [7:0] s4_axi_awlen; wire [2:0] s4_axi_awsize; wire [1:0] s4_axi_awburst; wire [0:0] s4_axi_awlock; wire [3:0] s4_axi_awcache; wire [2:0] s4_axi_awprot; wire [3:0] s4_axi_awqos; wire s4_axi_awvalid; wire s4_axi_awready; wire [C_S4_AXI_DATA_WIDTH-1:0] s4_axi_wdata; wire [C_S4_AXI_DATA_WIDTH/8-1:0] s4_axi_wstrb; wire s4_axi_wlast; wire s4_axi_wvalid; wire s4_axi_wready; wire [C_S4_AXI_ID_WIDTH-1:0] s4_axi_bid; wire [1:0] s4_axi_bresp; wire s4_axi_bvalid; wire s4_axi_bready; wire [C_S4_AXI_ID_WIDTH-1:0] s4_axi_arid; wire [C_S4_AXI_ADDR_WIDTH-1:0] s4_axi_araddr; wire [7:0] s4_axi_arlen; wire [2:0] s4_axi_arsize; wire [1:0] s4_axi_arburst; wire [0:0] s4_axi_arlock; wire [3:0] s4_axi_arcache; wire [2:0] s4_axi_arprot; wire [3:0] s4_axi_arqos; wire s4_axi_arvalid; wire s4_axi_arready; wire [C_S4_AXI_ID_WIDTH-1:0] s4_axi_rid; wire [C_S4_AXI_DATA_WIDTH-1:0] s4_axi_rdata; wire [1:0] s4_axi_rresp; wire s4_axi_rlast; wire s4_axi_rvalid; wire s4_axi_rready; wire s5_axi_aclk; wire s5_axi_aresetn; wire [C_S5_AXI_ID_WIDTH-1:0] s5_axi_awid; wire [C_S5_AXI_ADDR_WIDTH-1:0] s5_axi_awaddr; wire [7:0] s5_axi_awlen; wire [2:0] s5_axi_awsize; wire [1:0] s5_axi_awburst; wire [0:0] s5_axi_awlock; wire [3:0] s5_axi_awcache; wire [2:0] s5_axi_awprot; wire [3:0] s5_axi_awqos; wire s5_axi_awvalid; wire s5_axi_awready; wire [C_S5_AXI_DATA_WIDTH-1:0] s5_axi_wdata; wire [C_S5_AXI_DATA_WIDTH/8-1:0] s5_axi_wstrb; wire s5_axi_wlast; wire s5_axi_wvalid; wire s5_axi_wready; wire [C_S5_AXI_ID_WIDTH-1:0] s5_axi_bid; wire [1:0] s5_axi_bresp; wire s5_axi_bvalid; wire s5_axi_bready; wire [C_S5_AXI_ID_WIDTH-1:0] s5_axi_arid; wire [C_S5_AXI_ADDR_WIDTH-1:0] s5_axi_araddr; wire [7:0] s5_axi_arlen; wire [2:0] s5_axi_arsize; wire [1:0] s5_axi_arburst; wire [0:0] s5_axi_arlock; wire [3:0] s5_axi_arcache; wire [2:0] s5_axi_arprot; wire [3:0] s5_axi_arqos; wire s5_axi_arvalid; wire s5_axi_arready; wire [C_S5_AXI_ID_WIDTH-1:0] s5_axi_rid; wire [C_S5_AXI_DATA_WIDTH-1:0] s5_axi_rdata; wire [1:0] s5_axi_rresp; wire s5_axi_rlast; wire s5_axi_rvalid; wire s5_axi_rready; wire [7:0] uo_data; wire uo_data_valid; wire uo_cmd_ready_in; wire uo_refrsh_flag; wire uo_cal_start; wire uo_sdo; wire [31:0] status; wire sysclk_2x_bufpll_o; wire sysclk_2x_180_bufpll_o; wire pll_ce_0_bufpll_o; wire pll_ce_90_bufpll_o; wire pll_lock_bufpll_o; // mcb_ui_top instantiation mcb_ui_top # ( // Raw Wrapper Parameters .C_MEMCLK_PERIOD (C_MEMCLK_PERIOD), .C_PORT_ENABLE (C_PORT_ENABLE), .C_MEM_ADDR_ORDER (C_MEM_ADDR_ORDER), .C_ARB_ALGORITHM (C_ARB_ALGORITHM), .C_ARB_NUM_TIME_SLOTS (C_ARB_NUM_TIME_SLOTS), .C_ARB_TIME_SLOT_0 (C_ARB_TIME_SLOT_0), .C_ARB_TIME_SLOT_1 (C_ARB_TIME_SLOT_1), .C_ARB_TIME_SLOT_2 (C_ARB_TIME_SLOT_2), .C_ARB_TIME_SLOT_3 (C_ARB_TIME_SLOT_3), .C_ARB_TIME_SLOT_4 (C_ARB_TIME_SLOT_4), .C_ARB_TIME_SLOT_5 (C_ARB_TIME_SLOT_5), .C_ARB_TIME_SLOT_6 (C_ARB_TIME_SLOT_6), .C_ARB_TIME_SLOT_7 (C_ARB_TIME_SLOT_7), .C_ARB_TIME_SLOT_8 (C_ARB_TIME_SLOT_8), .C_ARB_TIME_SLOT_9 (C_ARB_TIME_SLOT_9), .C_ARB_TIME_SLOT_10 (C_ARB_TIME_SLOT_10), .C_ARB_TIME_SLOT_11 (C_ARB_TIME_SLOT_11), .C_PORT_CONFIG (C_PORT_CONFIG), .C_MEM_TRAS (C_MEM_TRAS), .C_MEM_TRCD (C_MEM_TRCD), .C_MEM_TREFI (C_MEM_TREFI), .C_MEM_TRFC (C_MEM_TRFC), .C_MEM_TRP (C_MEM_TRP), .C_MEM_TWR (C_MEM_TWR), .C_MEM_TRTP (C_MEM_TRTP), .C_MEM_TWTR (C_MEM_TWTR), .C_NUM_DQ_PINS (C_NUM_DQ_PINS), .C_MEM_TYPE (C_MEM_TYPE), .C_MEM_DENSITY (C_MEM_DENSITY), .C_MEM_BURST_LEN (C_MEM_BURST_LEN), .C_MEM_CAS_LATENCY (C_MEM_CAS_LATENCY), .C_MEM_ADDR_WIDTH (C_MEM_ADDR_WIDTH), .C_MEM_BANKADDR_WIDTH (C_MEM_BANKADDR_WIDTH), .C_MEM_NUM_COL_BITS (C_MEM_NUM_COL_BITS), .C_MEM_DDR3_CAS_LATENCY (C_MEM_DDR3_CAS_LATENCY), .C_MEM_MOBILE_PA_SR (C_MEM_MOBILE_PA_SR), .C_MEM_DDR1_2_ODS (C_MEM_DDR1_2_ODS), .C_MEM_DDR3_ODS (C_MEM_DDR3_ODS), .C_MEM_DDR2_RTT (C_MEM_DDR2_RTT), .C_MEM_DDR3_RTT (C_MEM_DDR3_RTT), .C_MEM_MDDR_ODS (C_MEM_MDDR_ODS), .C_MEM_DDR2_DIFF_DQS_EN (C_MEM_DDR2_DIFF_DQS_EN), .C_MEM_DDR2_3_PA_SR (C_MEM_DDR2_3_PA_SR), .C_MEM_DDR3_CAS_WR_LATENCY (C_MEM_DDR3_CAS_WR_LATENCY), .C_MEM_DDR3_AUTO_SR (C_MEM_DDR3_AUTO_SR), .C_MEM_DDR2_3_HIGH_TEMP_SR (C_MEM_DDR2_3_HIGH_TEMP_SR), .C_MEM_DDR3_DYN_WRT_ODT (C_MEM_DDR3_DYN_WRT_ODT), .C_MEM_TZQINIT_MAXCNT (C_MEM_TZQINIT_MAXCNT), .C_MC_CALIB_BYPASS (C_MC_CALIB_BYPASS), .C_MC_CALIBRATION_RA (C_MC_CALIBRATION_RA), .C_MC_CALIBRATION_BA (C_MC_CALIBRATION_BA), .C_MC_CALIBRATION_CA (C_MC_CALIBRATION_CA), .C_CALIB_SOFT_IP (C_CALIB_SOFT_IP), .C_SKIP_IN_TERM_CAL (C_SKIP_IN_TERM_CAL), .C_SKIP_DYNAMIC_CAL (C_SKIP_DYNAMIC_CAL), .C_SKIP_DYN_IN_TERM (C_SKIP_DYN_IN_TERM), .LDQSP_TAP_DELAY_VAL (LDQSP_TAP_DELAY_VAL), .UDQSP_TAP_DELAY_VAL (UDQSP_TAP_DELAY_VAL), .LDQSN_TAP_DELAY_VAL (LDQSN_TAP_DELAY_VAL), .UDQSN_TAP_DELAY_VAL (UDQSN_TAP_DELAY_VAL), .DQ0_TAP_DELAY_VAL (DQ0_TAP_DELAY_VAL), .DQ1_TAP_DELAY_VAL (DQ1_TAP_DELAY_VAL), .DQ2_TAP_DELAY_VAL (DQ2_TAP_DELAY_VAL), .DQ3_TAP_DELAY_VAL (DQ3_TAP_DELAY_VAL), .DQ4_TAP_DELAY_VAL (DQ4_TAP_DELAY_VAL), .DQ5_TAP_DELAY_VAL (DQ5_TAP_DELAY_VAL), .DQ6_TAP_DELAY_VAL (DQ6_TAP_DELAY_VAL), .DQ7_TAP_DELAY_VAL (DQ7_TAP_DELAY_VAL), .DQ8_TAP_DELAY_VAL (DQ8_TAP_DELAY_VAL), .DQ9_TAP_DELAY_VAL (DQ9_TAP_DELAY_VAL), .DQ10_TAP_DELAY_VAL (DQ10_TAP_DELAY_VAL), .DQ11_TAP_DELAY_VAL (DQ11_TAP_DELAY_VAL), .DQ12_TAP_DELAY_VAL (DQ12_TAP_DELAY_VAL), .DQ13_TAP_DELAY_VAL (DQ13_TAP_DELAY_VAL), .DQ14_TAP_DELAY_VAL (DQ14_TAP_DELAY_VAL), .DQ15_TAP_DELAY_VAL (DQ15_TAP_DELAY_VAL), .C_MC_CALIBRATION_CLK_DIV (C_MC_CALIBRATION_CLK_DIV), .C_MC_CALIBRATION_MODE (C_MC_CALIBRATION_MODE), .C_MC_CALIBRATION_DELAY (C_MC_CALIBRATION_DELAY), .C_SIMULATION (C_SIMULATION), .C_P0_MASK_SIZE (C_P0_MASK_SIZE), .C_P0_DATA_PORT_SIZE (C_P0_DATA_PORT_SIZE), .C_P1_MASK_SIZE (C_P1_MASK_SIZE), .C_P1_DATA_PORT_SIZE (C_P1_DATA_PORT_SIZE), .C_MCB_USE_EXTERNAL_BUFPLL (C_MCB_USE_EXTERNAL_BUFPLL) ) mcb_ui_top_inst ( // Raw Wrapper Signals .sysclk_2x (sysclk_2x), .sysclk_2x_180 (sysclk_2x_180), .pll_ce_0 (pll_ce_0), .pll_ce_90 (pll_ce_90), .pll_lock (pll_lock), .sysclk_2x_bufpll_o (sysclk_2x_bufpll_o), .sysclk_2x_180_bufpll_o (sysclk_2x_180_bufpll_o), .pll_ce_0_bufpll_o (pll_ce_0_bufpll_o), .pll_ce_90_bufpll_o (pll_ce_90_bufpll_o), .pll_lock_bufpll_o (pll_lock_bufpll_o), .sys_rst (async_rst), .p0_arb_en (1'b1), .p0_cmd_clk (p0_cmd_clk), .p0_cmd_en (p0_cmd_en), .p0_cmd_instr (p0_cmd_instr), .p0_cmd_bl (p0_cmd_bl), .p0_cmd_byte_addr (p0_cmd_byte_addr), .p0_cmd_empty (p0_cmd_empty), .p0_cmd_full (p0_cmd_full), .p0_wr_clk (p0_wr_clk), .p0_wr_en (p0_wr_en), .p0_wr_mask (p0_wr_mask), .p0_wr_data (p0_wr_data), .p0_wr_full (p0_wr_full), .p0_wr_empty (p0_wr_empty), .p0_wr_count (p0_wr_count), .p0_wr_underrun (p0_wr_underrun), .p0_wr_error (p0_wr_error), .p0_rd_clk (p0_rd_clk), .p0_rd_en (p0_rd_en), .p0_rd_data (p0_rd_data), .p0_rd_full (p0_rd_full), .p0_rd_empty (p0_rd_empty), .p0_rd_count (p0_rd_count), .p0_rd_overflow (p0_rd_overflow), .p0_rd_error (p0_rd_error), .p1_arb_en (1'b1), .p1_cmd_clk (p1_cmd_clk), .p1_cmd_en (p1_cmd_en), .p1_cmd_instr (p1_cmd_instr), .p1_cmd_bl (p1_cmd_bl), .p1_cmd_byte_addr (p1_cmd_byte_addr), .p1_cmd_empty (p1_cmd_empty), .p1_cmd_full (p1_cmd_full), .p1_wr_clk (p1_wr_clk), .p1_wr_en (p1_wr_en), .p1_wr_mask (p1_wr_mask), .p1_wr_data (p1_wr_data), .p1_wr_full (p1_wr_full), .p1_wr_empty (p1_wr_empty), .p1_wr_count (p1_wr_count), .p1_wr_underrun (p1_wr_underrun), .p1_wr_error (p1_wr_error), .p1_rd_clk (p1_rd_clk), .p1_rd_en (p1_rd_en), .p1_rd_data (p1_rd_data), .p1_rd_full (p1_rd_full), .p1_rd_empty (p1_rd_empty), .p1_rd_count (p1_rd_count), .p1_rd_overflow (p1_rd_overflow), .p1_rd_error (p1_rd_error), .p2_arb_en (1'b1), .p2_cmd_clk (p2_cmd_clk), .p2_cmd_en (p2_cmd_en), .p2_cmd_instr (p2_cmd_instr), .p2_cmd_bl (p2_cmd_bl), .p2_cmd_byte_addr (p2_cmd_byte_addr), .p2_cmd_empty (p2_cmd_empty), .p2_cmd_full (p2_cmd_full), .p2_wr_clk (p2_wr_clk), .p2_wr_en (p2_wr_en), .p2_wr_mask (p2_wr_mask), .p2_wr_data (p2_wr_data), .p2_wr_full (p2_wr_full), .p2_wr_empty (p2_wr_empty), .p2_wr_count (p2_wr_count), .p2_wr_underrun (p2_wr_underrun), .p2_wr_error (p2_wr_error), .p2_rd_clk (p2_rd_clk), .p2_rd_en (p2_rd_en), .p2_rd_data (p2_rd_data), .p2_rd_full (p2_rd_full), .p2_rd_empty (p2_rd_empty), .p2_rd_count (p2_rd_count), .p2_rd_overflow (p2_rd_overflow), .p2_rd_error (p2_rd_error), .p3_arb_en (1'b1), .p3_cmd_clk (p3_cmd_clk), .p3_cmd_en (p3_cmd_en), .p3_cmd_instr (p3_cmd_instr), .p3_cmd_bl (p3_cmd_bl), .p3_cmd_byte_addr (p3_cmd_byte_addr), .p3_cmd_empty (p3_cmd_empty), .p3_cmd_full (p3_cmd_full), .p3_wr_clk (p3_wr_clk), .p3_wr_en (p3_wr_en), .p3_wr_mask (p3_wr_mask), .p3_wr_data (p3_wr_data), .p3_wr_full (p3_wr_full), .p3_wr_empty (p3_wr_empty), .p3_wr_count (p3_wr_count), .p3_wr_underrun (p3_wr_underrun), .p3_wr_error (p3_wr_error), .p3_rd_clk (p3_rd_clk), .p3_rd_en (p3_rd_en), .p3_rd_data (p3_rd_data), .p3_rd_full (p3_rd_full), .p3_rd_empty (p3_rd_empty), .p3_rd_count (p3_rd_count), .p3_rd_overflow (p3_rd_overflow), .p3_rd_error (p3_rd_error), .p4_arb_en (1'b1), .p4_cmd_clk (p4_cmd_clk), .p4_cmd_en (p4_cmd_en), .p4_cmd_instr (p4_cmd_instr), .p4_cmd_bl (p4_cmd_bl), .p4_cmd_byte_addr (p4_cmd_byte_addr), .p4_cmd_empty (p4_cmd_empty), .p4_cmd_full (p4_cmd_full), .p4_wr_clk (p4_wr_clk), .p4_wr_en (p4_wr_en), .p4_wr_mask (p4_wr_mask), .p4_wr_data (p4_wr_data), .p4_wr_full (p4_wr_full), .p4_wr_empty (p4_wr_empty), .p4_wr_count (p4_wr_count), .p4_wr_underrun (p4_wr_underrun), .p4_wr_error (p4_wr_error), .p4_rd_clk (p4_rd_clk), .p4_rd_en (p4_rd_en), .p4_rd_data (p4_rd_data), .p4_rd_full (p4_rd_full), .p4_rd_empty (p4_rd_empty), .p4_rd_count (p4_rd_count), .p4_rd_overflow (p4_rd_overflow), .p4_rd_error (p4_rd_error), .p5_arb_en (1'b1), .p5_cmd_clk (p5_cmd_clk), .p5_cmd_en (p5_cmd_en), .p5_cmd_instr (p5_cmd_instr), .p5_cmd_bl (p5_cmd_bl), .p5_cmd_byte_addr (p5_cmd_byte_addr), .p5_cmd_empty (p5_cmd_empty), .p5_cmd_full (p5_cmd_full), .p5_wr_clk (p5_wr_clk), .p5_wr_en (p5_wr_en), .p5_wr_mask (p5_wr_mask), .p5_wr_data (p5_wr_data), .p5_wr_full (p5_wr_full), .p5_wr_empty (p5_wr_empty), .p5_wr_count (p5_wr_count), .p5_wr_underrun (p5_wr_underrun), .p5_wr_error (p5_wr_error), .p5_rd_clk (p5_rd_clk), .p5_rd_en (p5_rd_en), .p5_rd_data (p5_rd_data), .p5_rd_full (p5_rd_full), .p5_rd_empty (p5_rd_empty), .p5_rd_count (p5_rd_count), .p5_rd_overflow (p5_rd_overflow), .p5_rd_error (p5_rd_error), .mcbx_dram_addr (mcbx_dram_addr), .mcbx_dram_ba (mcbx_dram_ba), .mcbx_dram_ras_n (mcbx_dram_ras_n), .mcbx_dram_cas_n (mcbx_dram_cas_n), .mcbx_dram_we_n (mcbx_dram_we_n), .mcbx_dram_cke (mcbx_dram_cke), .mcbx_dram_clk (mcbx_dram_clk), .mcbx_dram_clk_n (mcbx_dram_clk_n), .mcbx_dram_dq (mcbx_dram_dq), .mcbx_dram_dqs (mcbx_dram_dqs), .mcbx_dram_dqs_n (mcbx_dram_dqs_n), .mcbx_dram_udqs (mcbx_dram_udqs), .mcbx_dram_udqs_n (mcbx_dram_udqs_n), .mcbx_dram_udm (mcbx_dram_udm), .mcbx_dram_ldm (mcbx_dram_ldm), .mcbx_dram_odt (mcbx_dram_odt), .mcbx_dram_ddr3_rst (mcbx_dram_ddr3_rst), .calib_recal (1'b0), .rzq (mcbx_rzq), .zio (mcbx_zio), .ui_read (1'b0), .ui_add (1'b0), .ui_cs (1'b0), .ui_clk (mcb_drp_clk), .ui_sdi (1'b0), .ui_addr (5'b0), .ui_broadcast (1'b0), .ui_drp_update (1'b0), .ui_done_cal (1'b1), .ui_cmd (1'b0), .ui_cmd_in (1'b0), .ui_cmd_en (1'b0), .ui_dqcount (4'b0), .ui_dq_lower_dec (1'b0), .ui_dq_lower_inc (1'b0), .ui_dq_upper_dec (1'b0), .ui_dq_upper_inc (1'b0), .ui_udqs_inc (1'b0), .ui_udqs_dec (1'b0), .ui_ldqs_inc (1'b0), .ui_ldqs_dec (1'b0), .uo_data (uo_data), .uo_data_valid (uo_data_valid), .uo_done_cal (calib_done), .uo_cmd_ready_in (uo_cmd_ready_in), .uo_refrsh_flag (uo_refrsh_flag), .uo_cal_start (uo_cal_start), .uo_sdo (uo_sdo), .status (status), .selfrefresh_enter (selfrefresh_enter), .selfrefresh_mode (selfrefresh_mode), // AXI Signals .s0_axi_aclk (s0_axi_aclk), .s0_axi_aresetn (s0_axi_aresetn), .s0_axi_awid (s0_axi_awid), .s0_axi_awaddr (s0_axi_awaddr), .s0_axi_awlen (s0_axi_awlen), .s0_axi_awsize (s0_axi_awsize), .s0_axi_awburst (s0_axi_awburst), .s0_axi_awlock (s0_axi_awlock), .s0_axi_awcache (s0_axi_awcache), .s0_axi_awprot (s0_axi_awprot), .s0_axi_awqos (s0_axi_awqos), .s0_axi_awvalid (s0_axi_awvalid), .s0_axi_awready (s0_axi_awready), .s0_axi_wdata (s0_axi_wdata), .s0_axi_wstrb (s0_axi_wstrb), .s0_axi_wlast (s0_axi_wlast), .s0_axi_wvalid (s0_axi_wvalid), .s0_axi_wready (s0_axi_wready), .s0_axi_bid (s0_axi_bid), .s0_axi_bresp (s0_axi_bresp), .s0_axi_bvalid (s0_axi_bvalid), .s0_axi_bready (s0_axi_bready), .s0_axi_arid (s0_axi_arid), .s0_axi_araddr (s0_axi_araddr), .s0_axi_arlen (s0_axi_arlen), .s0_axi_arsize (s0_axi_arsize), .s0_axi_arburst (s0_axi_arburst), .s0_axi_arlock (s0_axi_arlock), .s0_axi_arcache (s0_axi_arcache), .s0_axi_arprot (s0_axi_arprot), .s0_axi_arqos (s0_axi_arqos), .s0_axi_arvalid (s0_axi_arvalid), .s0_axi_arready (s0_axi_arready), .s0_axi_rid (s0_axi_rid), .s0_axi_rdata (s0_axi_rdata), .s0_axi_rresp (s0_axi_rresp), .s0_axi_rlast (s0_axi_rlast), .s0_axi_rvalid (s0_axi_rvalid), .s0_axi_rready (s0_axi_rready), .s1_axi_aclk (s1_axi_aclk), .s1_axi_aresetn (s1_axi_aresetn), .s1_axi_awid (s1_axi_awid), .s1_axi_awaddr (s1_axi_awaddr), .s1_axi_awlen (s1_axi_awlen), .s1_axi_awsize (s1_axi_awsize), .s1_axi_awburst (s1_axi_awburst), .s1_axi_awlock (s1_axi_awlock), .s1_axi_awcache (s1_axi_awcache), .s1_axi_awprot (s1_axi_awprot), .s1_axi_awqos (s1_axi_awqos), .s1_axi_awvalid (s1_axi_awvalid), .s1_axi_awready (s1_axi_awready), .s1_axi_wdata (s1_axi_wdata), .s1_axi_wstrb (s1_axi_wstrb), .s1_axi_wlast (s1_axi_wlast), .s1_axi_wvalid (s1_axi_wvalid), .s1_axi_wready (s1_axi_wready), .s1_axi_bid (s1_axi_bid), .s1_axi_bresp (s1_axi_bresp), .s1_axi_bvalid (s1_axi_bvalid), .s1_axi_bready (s1_axi_bready), .s1_axi_arid (s1_axi_arid), .s1_axi_araddr (s1_axi_araddr), .s1_axi_arlen (s1_axi_arlen), .s1_axi_arsize (s1_axi_arsize), .s1_axi_arburst (s1_axi_arburst), .s1_axi_arlock (s1_axi_arlock), .s1_axi_arcache (s1_axi_arcache), .s1_axi_arprot (s1_axi_arprot), .s1_axi_arqos (s1_axi_arqos), .s1_axi_arvalid (s1_axi_arvalid), .s1_axi_arready (s1_axi_arready), .s1_axi_rid (s1_axi_rid), .s1_axi_rdata (s1_axi_rdata), .s1_axi_rresp (s1_axi_rresp), .s1_axi_rlast (s1_axi_rlast), .s1_axi_rvalid (s1_axi_rvalid), .s1_axi_rready (s1_axi_rready), .s2_axi_aclk (s2_axi_aclk), .s2_axi_aresetn (s2_axi_aresetn), .s2_axi_awid (s2_axi_awid), .s2_axi_awaddr (s2_axi_awaddr), .s2_axi_awlen (s2_axi_awlen), .s2_axi_awsize (s2_axi_awsize), .s2_axi_awburst (s2_axi_awburst), .s2_axi_awlock (s2_axi_awlock), .s2_axi_awcache (s2_axi_awcache), .s2_axi_awprot (s2_axi_awprot), .s2_axi_awqos (s2_axi_awqos), .s2_axi_awvalid (s2_axi_awvalid), .s2_axi_awready (s2_axi_awready), .s2_axi_wdata (s2_axi_wdata), .s2_axi_wstrb (s2_axi_wstrb), .s2_axi_wlast (s2_axi_wlast), .s2_axi_wvalid (s2_axi_wvalid), .s2_axi_wready (s2_axi_wready), .s2_axi_bid (s2_axi_bid), .s2_axi_bresp (s2_axi_bresp), .s2_axi_bvalid (s2_axi_bvalid), .s2_axi_bready (s2_axi_bready), .s2_axi_arid (s2_axi_arid), .s2_axi_araddr (s2_axi_araddr), .s2_axi_arlen (s2_axi_arlen), .s2_axi_arsize (s2_axi_arsize), .s2_axi_arburst (s2_axi_arburst), .s2_axi_arlock (s2_axi_arlock), .s2_axi_arcache (s2_axi_arcache), .s2_axi_arprot (s2_axi_arprot), .s2_axi_arqos (s2_axi_arqos), .s2_axi_arvalid (s2_axi_arvalid), .s2_axi_arready (s2_axi_arready), .s2_axi_rid (s2_axi_rid), .s2_axi_rdata (s2_axi_rdata), .s2_axi_rresp (s2_axi_rresp), .s2_axi_rlast (s2_axi_rlast), .s2_axi_rvalid (s2_axi_rvalid), .s2_axi_rready (s2_axi_rready), .s3_axi_aclk (s3_axi_aclk), .s3_axi_aresetn (s3_axi_aresetn), .s3_axi_awid (s3_axi_awid), .s3_axi_awaddr (s3_axi_awaddr), .s3_axi_awlen (s3_axi_awlen), .s3_axi_awsize (s3_axi_awsize), .s3_axi_awburst (s3_axi_awburst), .s3_axi_awlock (s3_axi_awlock), .s3_axi_awcache (s3_axi_awcache), .s3_axi_awprot (s3_axi_awprot), .s3_axi_awqos (s3_axi_awqos), .s3_axi_awvalid (s3_axi_awvalid), .s3_axi_awready (s3_axi_awready), .s3_axi_wdata (s3_axi_wdata), .s3_axi_wstrb (s3_axi_wstrb), .s3_axi_wlast (s3_axi_wlast), .s3_axi_wvalid (s3_axi_wvalid), .s3_axi_wready (s3_axi_wready), .s3_axi_bid (s3_axi_bid), .s3_axi_bresp (s3_axi_bresp), .s3_axi_bvalid (s3_axi_bvalid), .s3_axi_bready (s3_axi_bready), .s3_axi_arid (s3_axi_arid), .s3_axi_araddr (s3_axi_araddr), .s3_axi_arlen (s3_axi_arlen), .s3_axi_arsize (s3_axi_arsize), .s3_axi_arburst (s3_axi_arburst), .s3_axi_arlock (s3_axi_arlock), .s3_axi_arcache (s3_axi_arcache), .s3_axi_arprot (s3_axi_arprot), .s3_axi_arqos (s3_axi_arqos), .s3_axi_arvalid (s3_axi_arvalid), .s3_axi_arready (s3_axi_arready), .s3_axi_rid (s3_axi_rid), .s3_axi_rdata (s3_axi_rdata), .s3_axi_rresp (s3_axi_rresp), .s3_axi_rlast (s3_axi_rlast), .s3_axi_rvalid (s3_axi_rvalid), .s3_axi_rready (s3_axi_rready), .s4_axi_aclk (s4_axi_aclk), .s4_axi_aresetn (s4_axi_aresetn), .s4_axi_awid (s4_axi_awid), .s4_axi_awaddr (s4_axi_awaddr), .s4_axi_awlen (s4_axi_awlen), .s4_axi_awsize (s4_axi_awsize), .s4_axi_awburst (s4_axi_awburst), .s4_axi_awlock (s4_axi_awlock), .s4_axi_awcache (s4_axi_awcache), .s4_axi_awprot (s4_axi_awprot), .s4_axi_awqos (s4_axi_awqos), .s4_axi_awvalid (s4_axi_awvalid), .s4_axi_awready (s4_axi_awready), .s4_axi_wdata (s4_axi_wdata), .s4_axi_wstrb (s4_axi_wstrb), .s4_axi_wlast (s4_axi_wlast), .s4_axi_wvalid (s4_axi_wvalid), .s4_axi_wready (s4_axi_wready), .s4_axi_bid (s4_axi_bid), .s4_axi_bresp (s4_axi_bresp), .s4_axi_bvalid (s4_axi_bvalid), .s4_axi_bready (s4_axi_bready), .s4_axi_arid (s4_axi_arid), .s4_axi_araddr (s4_axi_araddr), .s4_axi_arlen (s4_axi_arlen), .s4_axi_arsize (s4_axi_arsize), .s4_axi_arburst (s4_axi_arburst), .s4_axi_arlock (s4_axi_arlock), .s4_axi_arcache (s4_axi_arcache), .s4_axi_arprot (s4_axi_arprot), .s4_axi_arqos (s4_axi_arqos), .s4_axi_arvalid (s4_axi_arvalid), .s4_axi_arready (s4_axi_arready), .s4_axi_rid (s4_axi_rid), .s4_axi_rdata (s4_axi_rdata), .s4_axi_rresp (s4_axi_rresp), .s4_axi_rlast (s4_axi_rlast), .s4_axi_rvalid (s4_axi_rvalid), .s4_axi_rready (s4_axi_rready), .s5_axi_aclk (s5_axi_aclk), .s5_axi_aresetn (s5_axi_aresetn), .s5_axi_awid (s5_axi_awid), .s5_axi_awaddr (s5_axi_awaddr), .s5_axi_awlen (s5_axi_awlen), .s5_axi_awsize (s5_axi_awsize), .s5_axi_awburst (s5_axi_awburst), .s5_axi_awlock (s5_axi_awlock), .s5_axi_awcache (s5_axi_awcache), .s5_axi_awprot (s5_axi_awprot), .s5_axi_awqos (s5_axi_awqos), .s5_axi_awvalid (s5_axi_awvalid), .s5_axi_awready (s5_axi_awready), .s5_axi_wdata (s5_axi_wdata), .s5_axi_wstrb (s5_axi_wstrb), .s5_axi_wlast (s5_axi_wlast), .s5_axi_wvalid (s5_axi_wvalid), .s5_axi_wready (s5_axi_wready), .s5_axi_bid (s5_axi_bid), .s5_axi_bresp (s5_axi_bresp), .s5_axi_bvalid (s5_axi_bvalid), .s5_axi_bready (s5_axi_bready), .s5_axi_arid (s5_axi_arid), .s5_axi_araddr (s5_axi_araddr), .s5_axi_arlen (s5_axi_arlen), .s5_axi_arsize (s5_axi_arsize), .s5_axi_arburst (s5_axi_arburst), .s5_axi_arlock (s5_axi_arlock), .s5_axi_arcache (s5_axi_arcache), .s5_axi_arprot (s5_axi_arprot), .s5_axi_arqos (s5_axi_arqos), .s5_axi_arvalid (s5_axi_arvalid), .s5_axi_arready (s5_axi_arready), .s5_axi_rid (s5_axi_rid), .s5_axi_rdata (s5_axi_rdata), .s5_axi_rresp (s5_axi_rresp), .s5_axi_rlast (s5_axi_rlast), .s5_axi_rvalid (s5_axi_rvalid), .s5_axi_rready (s5_axi_rready) ); endmodule
Go to most recent revision | Compare with Previous | Blame | View Log