OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [orpsocv2/] [boards/] [xilinx/] [ml501/] [bench/] [verilog/] [include/] [ddr2_model_preload.v] - Rev 479

Go to most recent revision | Compare with Previous | Blame | View Log

// File intended to be included in the generate statement for each DDR2 part.
// The following loads a vmem file, "sram.vmem" by default, into the SDRAM.
 
// Wait until the DDR memory is initialised, and then magically
// load it
@(posedge dut.xilinx_ddr2_0.xilinx_ddr2_if0.phy_init_done);
//$display("%t: Loading DDR2",$time);
 
$readmemh("sram.vmem", program_array);
/* Now dish it out to the DDR2 model's memory */
for(ram_ptr = 0 ; ram_ptr < 4096 ; ram_ptr = ram_ptr + 1)
  begin
 
     // Construct the burst line, with every second word from where we
     // started, and picking the correct half of the word with i%2
     program_word_ptr = ram_ptr * 16 + (i/2) ; // Start on word0 or word1
     tmp_program_word = program_array[program_word_ptr];
     ddr2_ram_mem_line[15:0] = tmp_program_word[15 + ((i%2)*16):((i%2)*16)];
 
     program_word_ptr = program_word_ptr + 2;
     tmp_program_word = program_array[program_word_ptr]; 
     ddr2_ram_mem_line[31:16] = tmp_program_word[15 + ((i%2)*16):((i%2)*16)];
 
     program_word_ptr = program_word_ptr + 2;
     tmp_program_word = program_array[program_word_ptr];
     ddr2_ram_mem_line[47:32] = tmp_program_word[15 + ((i%2)*16):((i%2)*16)];
 
     program_word_ptr = program_word_ptr + 2;
     tmp_program_word = program_array[program_word_ptr];
     ddr2_ram_mem_line[63:48] = tmp_program_word[15 + ((i%2)*16):((i%2)*16)];
 
     program_word_ptr = program_word_ptr + 2;
     tmp_program_word = program_array[program_word_ptr];
     ddr2_ram_mem_line[79:64] = tmp_program_word[15 + ((i%2)*16):((i%2)*16)];
 
     program_word_ptr = program_word_ptr + 2;
     tmp_program_word = program_array[program_word_ptr];
     ddr2_ram_mem_line[95:80] = tmp_program_word[15 + ((i%2)*16):((i%2)*16)];
 
     program_word_ptr = program_word_ptr + 2;
     tmp_program_word = program_array[program_word_ptr];
     ddr2_ram_mem_line[111:96] = tmp_program_word[15 + ((i%2)*16):((i%2)*16)];
 
     program_word_ptr = program_word_ptr + 2;
     tmp_program_word = program_array[program_word_ptr];
     ddr2_ram_mem_line[127:112] = tmp_program_word[15 + ((i%2)*16):((i%2)*16)];
 
     // Put this assembled line into the RAM using its memory writing TASK
     u_mem0.memory_write(2'b00,ram_ptr[19:7],
			 {ram_ptr[6:0],3'b000},ddr2_ram_mem_line);
 
     //$display("Writing 0x%h, ramline=%d",ddr2_ram_mem_line, ram_ptr);
 
  end // for (ram_ptr = 0 ; ram_ptr < ...
$display("(%t) * DDR2 RAM %1d preloaded",$time, i);
 
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.