URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [orpsocv2/] [boards/] [xilinx/] [ml501/] [rtl/] [verilog/] [include/] [uart_defines.v] - Rev 530
Go to most recent revision | Compare with Previous | Blame | View Log
////////////////////////////////////////////////////////////////////// //// //// //// uart_defines.v //// //// //// //// //// //// This file is part of the "UART 16550 compatible" project //// //// http://www.opencores.org/cores/uart16550/ //// //// //// //// Documentation related to this project: //// //// - http://www.opencores.org/cores/uart16550/ //// //// //// //// Projects compatibility: //// //// - WISHBONE //// //// RS232 Protocol //// //// 16550D uart (mostly supported) //// //// //// //// Overview (main Features): //// //// Defines of the Core //// //// //// //// Known problems (limits): //// //// None //// //// //// //// To Do: //// //// Nothing. //// //// //// //// Author(s): //// //// - gorban@opencores.org //// //// - Jacob Gorban //// //// - Igor Mohor (igorm@opencores.org) //// //// //// //// Created: 2001/05/12 //// //// Last Updated: 2001/05/17 //// //// (See log for the revision history) //// //// //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2000, 2001 Authors //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // // CVS Revision History // // $Log: not supported by cvs2svn $ // Revision 1.13 2003/06/11 16:37:47 gorban // This fixes errors in some cases when data is being read and put to the FIFO at the same time. Patch is submitted by Scott Furman. Update is very recommended. // // Revision 1.12 2002/07/22 23:02:23 gorban // Bug Fixes: // * Possible loss of sync and bad reception of stop bit on slow baud rates fixed. // Problem reported by Kenny.Tung. // * Bad (or lack of ) loopback handling fixed. Reported by Cherry Withers. // // Improvements: // * Made FIFO's as general inferrable memory where possible. // So on FPGA they should be inferred as RAM (Distributed RAM on Xilinx). // This saves about 1/3 of the Slice count and reduces P&R and synthesis times. // // * Added optional baudrate output (baud_o). // This is identical to BAUDOUT* signal on 16550 chip. // It outputs 16xbit_clock_rate - the divided clock. // It's disabled by default. Define UART_HAS_BAUDRATE_OUTPUT to use. // // Revision 1.10 2001/12/11 08:55:40 mohor // Scratch register define added. // // Revision 1.9 2001/12/03 21:44:29 gorban // Updated specification documentation. // Added full 32-bit data bus interface, now as default. // Address is 5-bit wide in 32-bit data bus mode. // Added wb_sel_i input to the core. It's used in the 32-bit mode. // Added debug interface with two 32-bit read-only registers in 32-bit mode. // Bits 5 and 6 of LSR are now only cleared on TX FIFO write. // My small test bench is modified to work with 32-bit mode. // // Revision 1.8 2001/11/26 21:38:54 gorban // Lots of fixes: // Break condition wasn't handled correctly at all. // LSR bits could lose their values. // LSR value after reset was wrong. // Timing of THRE interrupt signal corrected. // LSR bit 0 timing corrected. // // Revision 1.7 2001/08/24 21:01:12 mohor // Things connected to parity changed. // Clock devider changed. // // Revision 1.6 2001/08/23 16:05:05 mohor // Stop bit bug fixed. // Parity bug fixed. // WISHBONE read cycle bug fixed, // OE indicator (Overrun Error) bug fixed. // PE indicator (Parity Error) bug fixed. // Register read bug fixed. // // Revision 1.5 2001/05/31 20:08:01 gorban // FIFO changes and other corrections. // // Revision 1.4 2001/05/21 19:12:02 gorban // Corrected some Linter messages. // // Revision 1.3 2001/05/17 18:34:18 gorban // First 'stable' release. Should be sythesizable now. Also added new header. // // Revision 1.0 2001-05-17 21:27:11+02 jacob // Initial revision // // // remove comments to restore to use the new version with 8 data bit interface // in 32bit-bus mode, the wb_sel_i signal is used to put data in correct place // also, in 8-bit version there'll be no debugging features included // CAUTION: doesn't work with current version of OR1200 `define DATA_BUS_WIDTH_8 `ifdef DATA_BUS_WIDTH_8 `define UART_ADDR_WIDTH 3 `define UART_DATA_WIDTH 8 `else `define UART_ADDR_WIDTH 5 `define UART_DATA_WIDTH 32 `endif // Uncomment this if you want your UART to have // 16xBaudrate output port. // If defined, the enable signal will be used to drive baudrate_o signal // It's frequency is 16xbaudrate // `define UART_HAS_BAUDRATE_OUTPUT // Register addresses `define UART_REG_RB `UART_ADDR_WIDTH'd0 // receiver buffer `define UART_REG_TR `UART_ADDR_WIDTH'd0 // transmitter `define UART_REG_IE `UART_ADDR_WIDTH'd1 // Interrupt enable `define UART_REG_II `UART_ADDR_WIDTH'd2 // Interrupt identification `define UART_REG_FC `UART_ADDR_WIDTH'd2 // FIFO control `define UART_REG_LC `UART_ADDR_WIDTH'd3 // Line Control `define UART_REG_MC `UART_ADDR_WIDTH'd4 // Modem control `define UART_REG_LS `UART_ADDR_WIDTH'd5 // Line status `define UART_REG_MS `UART_ADDR_WIDTH'd6 // Modem status `define UART_REG_SR `UART_ADDR_WIDTH'd7 // Scratch register `define UART_REG_DL1 `UART_ADDR_WIDTH'd0 // Divisor latch bytes (1-2) `define UART_REG_DL2 `UART_ADDR_WIDTH'd1 // Interrupt Enable register bits `define UART_IE_RDA 0 // Received Data available interrupt `define UART_IE_THRE 1 // Transmitter Holding Register empty interrupt `define UART_IE_RLS 2 // Receiver Line Status Interrupt `define UART_IE_MS 3 // Modem Status Interrupt // Interrupt Identification register bits `define UART_II_IP 0 // Interrupt pending when 0 `define UART_II_II 3:1 // Interrupt identification // Interrupt identification values for bits 3:1 `define UART_II_RLS 3'b011 // Receiver Line Status `define UART_II_RDA 3'b010 // Receiver Data available `define UART_II_TI 3'b110 // Timeout Indication `define UART_II_THRE 3'b001 // Transmitter Holding Register empty `define UART_II_MS 3'b000 // Modem Status // FIFO Control Register bits `define UART_FC_TL 1:0 // Trigger level // FIFO trigger level values `define UART_FC_1 2'b00 `define UART_FC_4 2'b01 `define UART_FC_8 2'b10 `define UART_FC_14 2'b11 // Line Control register bits `define UART_LC_BITS 1:0 // bits in character `define UART_LC_SB 2 // stop bits `define UART_LC_PE 3 // parity enable `define UART_LC_EP 4 // even parity `define UART_LC_SP 5 // stick parity `define UART_LC_BC 6 // Break control `define UART_LC_DL 7 // Divisor Latch access bit // Modem Control register bits `define UART_MC_DTR 0 `define UART_MC_RTS 1 `define UART_MC_OUT1 2 `define UART_MC_OUT2 3 `define UART_MC_LB 4 // Loopback mode // Line Status Register bits `define UART_LS_DR 0 // Data ready `define UART_LS_OE 1 // Overrun Error `define UART_LS_PE 2 // Parity Error `define UART_LS_FE 3 // Framing Error `define UART_LS_BI 4 // Break interrupt `define UART_LS_TFE 5 // Transmit FIFO is empty `define UART_LS_TE 6 // Transmitter Empty indicator `define UART_LS_EI 7 // Error indicator // Modem Status Register bits `define UART_MS_DCTS 0 // Delta signals `define UART_MS_DDSR 1 `define UART_MS_TERI 2 `define UART_MS_DDCD 3 `define UART_MS_CCTS 4 // Complement signals `define UART_MS_CDSR 5 `define UART_MS_CRI 6 `define UART_MS_CDCD 7 // FIFO parameter defines `define UART_FIFO_WIDTH 8 `define UART_FIFO_DEPTH 16 `define UART_FIFO_POINTER_W 4 `define UART_FIFO_COUNTER_W 5 // receiver fifo has width 11 because it has break, parity and framing error bits `define UART_FIFO_REC_WIDTH 11 `define VERBOSE_WB 0 // All activity on the WISHBONE is recorded `define VERBOSE_LINE_STATUS 0 // Details about the lsr (line status register) `define FAST_TEST 1 // 64/1024 packets are sent // Defines hard baud prescaler register - uncomment to enable //`define PRESCALER_PRESET_HARD // 115200 baud preset values // 20MHz: prescaler 10.8 (11, rounded up) //`define PRESCALER_HIGH_PRESET 8'd0 //`define PRESCALER_LOW_PRESET 8'd11 // 50MHz: prescaler 27.1 //`define PRESCALER_HIGH_PRESET 8'd0 //`define PRESCALER_LOW_PRESET 8'd27 // 66MHz: prescaler 36.1 //`define PRESCALER_HIGH_PRESET 8'd0 //`define PRESCALER_LOW_PRESET 8'd36
Go to most recent revision | Compare with Previous | Blame | View Log