OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [orpsocv2/] [boards/] [xilinx/] [ml501/] [rtl/] [verilog/] [xilinx_ddr2/] [README] - Rev 581

Go to most recent revision | Compare with Previous | Blame | View Log

Xilinx DDR2 controller with Wishbone interface

This is a Xilinx technology-dependent DDR2 memory controller, based on a 
controller from Xilinx's memory interface generator (MIG), with a small cache
memory and Wishbone wrapper.

The xilinx_ddr2_wb_if.v is a 3-master arbiter for the controller.
The xilinx_ddr2_if.v is the actual interface between the Wishbone bus and 
Xilinx MIG control interface.

When synthesizing, take note of the xilinx_ddr2_if_cache module, that is a 
dual-port memory, with different aspects on each size, and cannot be inferred. 
The NGC should be in the appropriate place in the synthesis or backend 
directories.

Wishbone B3-compliant bursting is yet to be implemented.

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.