OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [orpsocv2/] [boards/] [xilinx/] [ml501/] [rtl/] [verilog/] [xilinx_ddr2/] [ddr2_infrastructure.v] - Rev 856

Go to most recent revision | Compare with Previous | Blame | View Log

//*****************************************************************************
// DISCLAIMER OF LIABILITY
//
// This file contains proprietary and confidential information of
// Xilinx, Inc. ("Xilinx"), that is distributed under a license
// from Xilinx, and may be used, copied and/or disclosed only
// pursuant to the terms of a valid license agreement with Xilinx.
//
// XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION
// ("MATERIALS") "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER
// EXPRESSED, IMPLIED, OR STATUTORY, INCLUDING WITHOUT
// LIMITATION, ANY WARRANTY WITH RESPECT TO NONINFRINGEMENT,
// MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. Xilinx
// does not warrant that functions included in the Materials will
// meet the requirements of Licensee, or that the operation of the
// Materials will be uninterrupted or error-free, or that defects
// in the Materials will be corrected. Furthermore, Xilinx does
// not warrant or make any representations regarding use, or the
// results of the use, of the Materials in terms of correctness,
// accuracy, reliability or otherwise.
//
// Xilinx products are not designed or intended to be fail-safe,
// or for use in any application requiring fail-safe performance,
// such as life-support or safety devices or systems, Class III
// medical devices, nuclear facilities, applications related to
// the deployment of airbags, or any other applications that could
// lead to death, personal injury or severe property or
// environmental damage (individually and collectively, "critical
// applications"). Customer assumes the sole risk and liability
// of any use of Xilinx products in critical applications,
// subject only to applicable laws and regulations governing
// limitations on product liability.
//
// Copyright 2006, 2007, 2008 Xilinx, Inc.
// All rights reserved.
//
// This disclaimer and copyright notice must be retained as part
// of this file at all times.
//*****************************************************************************
//   ____  ____
//  /   /\/   /
// /___/  \  /    Vendor: Xilinx
// \   \   \/     Version: 3.0
//  \   \         Application: MIG
//  /   /         Filename: ddr2_infrastructure.v
// /___/   /\     Date Last Modified: $Date: 2008/12/23 14:26:00 $
// \   \  /  \    Date Created: Wed Aug 16 2006
//  \___\/\___\
//
//Device: Virtex-5
//Design Name: DDR2
//Purpose:
//   Clock generation/distribution and reset synchronization
//Reference:
//Revision History:
//   Rev 1.1 - Parameter CLK_TYPE added and logic for  DIFFERENTIAL and
//             SINGLE_ENDED added. PK. 6/20/08
//   Rev 1.2 - Loacalparam CLK_GENERATOR added and logic for clocks generation
//             using PLL or DCM added as generic code. PK. 10/14/08
//*****************************************************************************
 
`timescale 1ns/1ps
 
module ddr2_infrastructure #
  (
   // Following parameters are for 72-bit RDIMM design (for ML561 Reference
   // board design). Actual values may be different. Actual parameters values
   // are passed from design top module ddr2_mig module. Please refer to
   // the ddr2_mig module for actual values.
   parameter CLK_PERIOD    = 3000,
   parameter CLK_TYPE      = "DIFFERENTIAL",
   parameter DLL_FREQ_MODE = "HIGH",
   parameter RST_ACT_LOW  = 1
   )
  (
   input  sys_clk_p,
   input  sys_clk_n,
   input  sys_clk,
   input  clk200_p,
   input  clk200_n,
   input  idly_clk_200,
   output clk0,
   output clk90,
   output clk200,
   output clkdiv0,
   input  sys_rst_n,
   input  idelay_ctrl_rdy,
   output rst0,
   output rst90,
   output rst200,
   output rstdiv0
   );
 
  // # of clock cycles to delay deassertion of reset. Needs to be a fairly
  // high number not so much for metastability protection, but to give time
  // for reset (i.e. stable clock cycles) to propagate through all state
  // machines and to all control signals (i.e. not all control signals have
  // resets, instead they rely on base state logic being reset, and the effect
  // of that reset propagating through the logic). Need this because we may not
  // be getting stable clock cycles while reset asserted (i.e. since reset
  // depends on PLL/DCM lock status)
  localparam RST_SYNC_NUM = 25;
  localparam CLK_PERIOD_NS = CLK_PERIOD / 1000.0;
  localparam CLK_PERIOD_INT = CLK_PERIOD/1000;
 
  // By default this Parameter (CLK_GENERATOR) value is "PLL". If this
  // Parameter is set to "PLL", PLL is used to generate the design clocks.
  // If this Parameter is set to "DCM",
  // DCM is used to generate the design clocks.
  localparam CLK_GENERATOR = "PLL";
 
  wire                       clk0_bufg;
  wire                       clk0_bufg_in;
  wire                       clk90_bufg;
  wire                       clk90_bufg_in;
  wire                       clk200_bufg;
  wire                       clk200_ibufg;
  wire                       clkdiv0_bufg;
  wire                       clkdiv0_bufg_in;
  wire                       clkfbout_clkfbin;
  wire                       locked;
  reg [RST_SYNC_NUM-1:0]     rst0_sync_r    /* synthesis syn_maxfan = 10 */;
  reg [RST_SYNC_NUM-1:0]     rst200_sync_r  /* synthesis syn_maxfan = 10 */;
  reg [RST_SYNC_NUM-1:0]     rst90_sync_r   /* synthesis syn_maxfan = 10 */;
  reg [(RST_SYNC_NUM/2)-1:0] rstdiv0_sync_r /* synthesis syn_maxfan = 10 */;
  wire                       rst_tmp;
  wire                       sys_clk_ibufg;
  wire                       sys_rst;
 
  assign sys_rst = RST_ACT_LOW ? ~sys_rst_n: sys_rst_n;
 
  assign clk0    = clk0_bufg;
  assign clk90   = clk90_bufg;
  assign clk200  = clk200_bufg;
  assign clkdiv0 = clkdiv0_bufg;
 
  generate
  if(CLK_TYPE == "DIFFERENTIAL") begin : DIFF_ENDED_CLKS_INST
    //***************************************************************************
    // Differential input clock input buffers
    //***************************************************************************
 
    IBUFGDS_LVPECL_25 SYS_CLK_INST
      (
       .I  (sys_clk_p),
       .IB (sys_clk_n),
       .O  (sys_clk_ibufg)
       );
 
    IBUFGDS_LVPECL_25 IDLY_CLK_INST
      (
       .I  (clk200_p),
       .IB (clk200_n),
       .O  (clk200_ibufg)
       );
 
  end/* else if(CLK_TYPE == "SINGLE_ENDED") begin : SINGLE_ENDED_CLKS_INST
    //**************************************************************************
    // Single ended input clock input buffers
    //**************************************************************************
 
    IBUFG SYS_CLK_INST
      (
       .I  (sys_clk),
       .O  (sys_clk_ibufg)
       );
 
    IBUFG IDLY_CLK_INST
      (
       .I  (idly_clk_200),
       .O  (clk200_ibufg)
       );
      // This is being instantiated inside another design. these signals are properly generated elsewhere -- jb
  end*/
  endgenerate
   assign sys_clk_ibufg = sys_clk;
   //assign idly_clk_200 = clk200_ibufg;
   assign clk200_bufg = idly_clk_200;
 
/*
  BUFG CLK_200_BUFG
    (
     .O (clk200_bufg),
     .I (clk200_ibufg)
     );
*/
  //***************************************************************************
  // Global clock generation and distribution
  //***************************************************************************
 
  generate
    if (CLK_GENERATOR == "PLL") begin : gen_pll_adv
      PLL_ADV #
        (
         .BANDWIDTH          ("OPTIMIZED"),
         .CLKIN1_PERIOD      (CLK_PERIOD_NS),
         .CLKIN2_PERIOD      (10.000),
         .CLKOUT0_DIVIDE     (CLK_PERIOD_INT),
         .CLKOUT1_DIVIDE     (CLK_PERIOD_INT),
         .CLKOUT2_DIVIDE     (CLK_PERIOD_INT*2),
         .CLKOUT3_DIVIDE     (1),
         .CLKOUT4_DIVIDE     (1),
         .CLKOUT5_DIVIDE     (1),
         .CLKOUT0_PHASE      (0.000),
         .CLKOUT1_PHASE      (90.000),
         .CLKOUT2_PHASE      (0.000),
         .CLKOUT3_PHASE      (0.000),
         .CLKOUT4_PHASE      (0.000),
         .CLKOUT5_PHASE      (0.000),
         .CLKOUT0_DUTY_CYCLE (0.500),
         .CLKOUT1_DUTY_CYCLE (0.500),
         .CLKOUT2_DUTY_CYCLE (0.500),
         .CLKOUT3_DUTY_CYCLE (0.500),
         .CLKOUT4_DUTY_CYCLE (0.500),
         .CLKOUT5_DUTY_CYCLE (0.500),
         .COMPENSATION       ("SYSTEM_SYNCHRONOUS"),
         .DIVCLK_DIVIDE      (1),
         .CLKFBOUT_MULT      (CLK_PERIOD_INT),
         .CLKFBOUT_PHASE     (0.0),
         .REF_JITTER         (0.005000)
         )
        u_pll_adv
          (
           .CLKFBIN     (clkfbout_clkfbin),
           .CLKINSEL    (1'b1),
           .CLKIN1      (sys_clk_ibufg),
           .CLKIN2      (1'b0),
           .DADDR       (5'b0),
           .DCLK        (1'b0),
           .DEN         (1'b0),
           .DI          (16'b0),
           .DWE         (1'b0),
           .REL         (1'b0),
           .RST         (sys_rst),
           .CLKFBDCM    (),
           .CLKFBOUT    (clkfbout_clkfbin),
           .CLKOUTDCM0  (),
           .CLKOUTDCM1  (),
           .CLKOUTDCM2  (),
           .CLKOUTDCM3  (),
           .CLKOUTDCM4  (),
           .CLKOUTDCM5  (),
           .CLKOUT0     (clk0_bufg_in),
           .CLKOUT1     (clk90_bufg_in),
           .CLKOUT2     (clkdiv0_bufg_in),
           .CLKOUT3     (),
           .CLKOUT4     (),
           .CLKOUT5     (),
           .DO          (),
           .DRDY        (),
           .LOCKED      (locked)
           );
    end else if (CLK_GENERATOR == "DCM") begin: gen_dcm_base
      DCM_BASE #
        (
         .CLKIN_PERIOD          (CLK_PERIOD_NS),
         .CLKDV_DIVIDE          (2.0),
         .DLL_FREQUENCY_MODE    (DLL_FREQ_MODE),
         .DUTY_CYCLE_CORRECTION ("TRUE"),
         .FACTORY_JF            (16'hF0F0)
         )
        u_dcm_base
          (
           .CLK0      (clk0_bufg_in),
           .CLK180    (),
           .CLK270    (),
           .CLK2X     (),
           .CLK2X180  (),
           .CLK90     (clk90_bufg_in),
           .CLKDV     (clkdiv0_bufg_in),
           .CLKFX     (),
           .CLKFX180  (),
           .LOCKED    (locked),
           .CLKFB     (clk0_bufg),
           .CLKIN     (sys_clk_ibufg),
           .RST       (sys_rst)
           );
    end
  endgenerate
 
  BUFG U_BUFG_CLK0
    (
     .O (clk0_bufg),
     .I (clk0_bufg_in)
     );
 
  BUFG U_BUFG_CLK90
    (
     .O (clk90_bufg),
     .I (clk90_bufg_in)
     );
 
   BUFG U_BUFG_CLKDIV0
    (
     .O (clkdiv0_bufg),
     .I (clkdiv0_bufg_in)
     );
 
 
  //***************************************************************************
  // Reset synchronization
  // NOTES:
  //   1. shut down the whole operation if the PLL/ DCM hasn't yet locked (and
  //      by inference, this means that external SYS_RST_IN has been asserted -
  //      PLL/DCM deasserts LOCKED as soon as SYS_RST_IN asserted)
  //   2. In the case of all resets except rst200, also assert reset if the
  //      IDELAY master controller is not yet ready
  //   3. asynchronously assert reset. This was we can assert reset even if
  //      there is no clock (needed for things like 3-stating output buffers).
  //      reset deassertion is synchronous.
  //***************************************************************************
 
  assign rst_tmp = sys_rst | ~locked | ~idelay_ctrl_rdy;
 
  // synthesis attribute max_fanout of rst0_sync_r is 10
  always @(posedge clk0_bufg or posedge rst_tmp)
    if (rst_tmp)
      rst0_sync_r <= {RST_SYNC_NUM{1'b1}};
    else
      // logical left shift by one (pads with 0)
      rst0_sync_r <= rst0_sync_r << 1;
 
  // synthesis attribute max_fanout of rstdiv0_sync_r is 10
  always @(posedge clkdiv0_bufg or posedge rst_tmp)
    if (rst_tmp)
      rstdiv0_sync_r <= {(RST_SYNC_NUM/2){1'b1}};
    else
      // logical left shift by one (pads with 0)
      rstdiv0_sync_r <= rstdiv0_sync_r << 1;
 
  // synthesis attribute max_fanout of rst90_sync_r is 10
  always @(posedge clk90_bufg or posedge rst_tmp)
    if (rst_tmp)
      rst90_sync_r <= {RST_SYNC_NUM{1'b1}};
    else
      rst90_sync_r <= rst90_sync_r << 1;
 
  // make sure CLK200 doesn't depend on IDELAY_CTRL_RDY, else chicken n' egg
  // synthesis attribute max_fanout of rst200_sync_r is 10
  always @(posedge clk200_bufg or negedge locked)
    if (!locked)
      rst200_sync_r <= {RST_SYNC_NUM{1'b1}};
    else
      rst200_sync_r <= rst200_sync_r << 1;
 
 
  assign rst0    = rst0_sync_r[RST_SYNC_NUM-1];
  assign rst90   = rst90_sync_r[RST_SYNC_NUM-1];
  assign rst200  = rst200_sync_r[RST_SYNC_NUM-1];
  assign rstdiv0 = rstdiv0_sync_r[(RST_SYNC_NUM/2)-1];
 
endmodule
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.