OpenCores
URL https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk

Subversion Repositories openrisc_me

[/] [openrisc/] [trunk/] [orpsocv2/] [boards/] [xilinx/] [ml501/] [rtl/] [verilog/] [xilinx_ddr2/] [ddr2_mem_if_top.v] - Rev 412

Compare with Previous | Blame | View Log

//*****************************************************************************
// DISCLAIMER OF LIABILITY
//
// This file contains proprietary and confidential information of
// Xilinx, Inc. ("Xilinx"), that is distributed under a license
// from Xilinx, and may be used, copied and/or disclosed only
// pursuant to the terms of a valid license agreement with Xilinx.
//
// XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION
// ("MATERIALS") "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER
// EXPRESSED, IMPLIED, OR STATUTORY, INCLUDING WITHOUT
// LIMITATION, ANY WARRANTY WITH RESPECT TO NONINFRINGEMENT,
// MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. Xilinx
// does not warrant that functions included in the Materials will
// meet the requirements of Licensee, or that the operation of the
// Materials will be uninterrupted or error-free, or that defects
// in the Materials will be corrected. Furthermore, Xilinx does
// not warrant or make any representations regarding use, or the
// results of the use, of the Materials in terms of correctness,
// accuracy, reliability or otherwise.
//
// Xilinx products are not designed or intended to be fail-safe,
// or for use in any application requiring fail-safe performance,
// such as life-support or safety devices or systems, Class III
// medical devices, nuclear facilities, applications related to
// the deployment of airbags, or any other applications that could
// lead to death, personal injury or severe property or
// environmental damage (individually and collectively, "critical
// applications"). Customer assumes the sole risk and liability
// of any use of Xilinx products in critical applications,
// subject only to applicable laws and regulations governing
// limitations on product liability.
//
// Copyright 2006, 2007, 2008 Xilinx, Inc.
// All rights reserved.
//
// This disclaimer and copyright notice must be retained as part
// of this file at all times.
//*****************************************************************************
//   ____  ____
//  /   /\/   /
// /___/  \  /    Vendor: Xilinx
// \   \   \/     Version: 3.0
//  \   \         Application: MIG
//  /   /         Filename: ddr2_mem_if_top.v
// /___/   /\     Date Last Modified: $Date: 2009/01/15 14:22:14 $
// \   \  /  \    Date Created: Wed Aug 16 2006
//  \___\/\___\
//
//Device: Virtex-5
//Design Name: DDR/DDR2
//Purpose:
//   Top-level for parameterizable (DDR or DDR2) memory interface
//Reference:
//Revision History:
//   Rev 1.1 - Parameter USE_DM_PORT added. PK. 6/25/08
//   Rev 1.2 - Parameter HIGH_PERFORMANCE_MODE added. PK. 7/10/08
//   Rev 1.3 - Parameter CS_BITS added. PK. 10/8/08
//   Rev 1.4 - Parameter IODELAY_GRP added. PK. 11/27/08
//*****************************************************************************
 
`timescale 1ns/1ps
 
module ddr2_mem_if_top #
  (
   // Following parameters are for 72-bit RDIMM design (for ML561 Reference
   // board design). Actual values may be different. Actual parameters values
   // are passed from design top module ddr2_mig module. Please refer to
   // the ddr2_mig module for actual values.
   parameter BANK_WIDTH            = 2,
   parameter CKE_WIDTH             = 1,
   parameter CLK_WIDTH             = 1,
   parameter COL_WIDTH             = 10,
   parameter CS_BITS               = 0,
   parameter CS_NUM                = 1,
   parameter CS_WIDTH              = 1,
   parameter USE_DM_PORT           = 1,
   parameter DM_WIDTH              = 9,
   parameter DQ_WIDTH              = 72,
   parameter DQ_BITS               = 7,
   parameter DQ_PER_DQS            = 8,
   parameter DQS_BITS              = 4,
   parameter DQS_WIDTH             = 9,
   parameter HIGH_PERFORMANCE_MODE = "TRUE",
   parameter IODELAY_GRP           = "IODELAY_MIG",
   parameter ODT_WIDTH             = 1,
   parameter ROW_WIDTH             = 14,
   parameter APPDATA_WIDTH         = 144,
   parameter ADDITIVE_LAT          = 0,
   parameter BURST_LEN             = 4,
   parameter BURST_TYPE            = 0,
   parameter CAS_LAT               = 5,
   parameter ECC_ENABLE            = 0,
   parameter MULTI_BANK_EN         = 1,
   parameter TWO_T_TIME_EN         = 0,
   parameter ODT_TYPE              = 1,
   parameter DDR_TYPE              = 1,
   parameter REDUCE_DRV            = 0,
   parameter REG_ENABLE            = 1,
   parameter TREFI_NS              = 7800,
   parameter TRAS                  = 40000,
   parameter TRCD                  = 15000,
   parameter TRFC                  = 105000,
   parameter TRP                   = 15000,
   parameter TRTP                  = 7500,
   parameter TWR                   = 15000,
   parameter TWTR                  = 10000,
   parameter CLK_PERIOD            = 3000,
   parameter SIM_ONLY              = 0,
   parameter DEBUG_EN              = 0,
   parameter FPGA_SPEED_GRADE      = 2
   )
  (
   input                                    clk0,
   input usr_clk, // jb
   input                                    clk90,
   input                                    clkdiv0,
   input                                    rst0,
   input                                    rst90,
   input                                    rstdiv0,
   input [2:0]                              app_af_cmd,
   input [30:0]                             app_af_addr,
   input                                    app_af_wren,
   input                                    app_wdf_wren,
   input [APPDATA_WIDTH-1:0]                app_wdf_data,
   input [(APPDATA_WIDTH/8)-1:0]            app_wdf_mask_data,
   output [1:0]                             rd_ecc_error,
   output                                   app_af_afull,
   output                                   app_wdf_afull,
   output                                   rd_data_valid,
   output [APPDATA_WIDTH-1:0]               rd_data_fifo_out,
   output                                   phy_init_done,
   output [CLK_WIDTH-1:0]                   ddr_ck,
   output [CLK_WIDTH-1:0]                   ddr_ck_n,
   output [ROW_WIDTH-1:0]                   ddr_addr,
   output [BANK_WIDTH-1:0]                  ddr_ba,
   output                                   ddr_ras_n,
   output                                   ddr_cas_n,
   output                                   ddr_we_n,
   output [CS_WIDTH-1:0]                    ddr_cs_n,
   output [CKE_WIDTH-1:0]                   ddr_cke,
   output [ODT_WIDTH-1:0]                   ddr_odt,
   output [DM_WIDTH-1:0]                    ddr_dm,
   inout [DQS_WIDTH-1:0]                    ddr_dqs,
   inout [DQS_WIDTH-1:0]                    ddr_dqs_n,
   inout [DQ_WIDTH-1:0]                     ddr_dq,
   // Debug signals (optional use)
   input                                    dbg_idel_up_all,
   input                                    dbg_idel_down_all,
   input                                    dbg_idel_up_dq,
   input                                    dbg_idel_down_dq,
   input                                    dbg_idel_up_dqs,
   input                                    dbg_idel_down_dqs,
   input                                    dbg_idel_up_gate,
   input                                    dbg_idel_down_gate,
   input [DQ_BITS-1:0]                      dbg_sel_idel_dq,
   input                                    dbg_sel_all_idel_dq,
   input [DQS_BITS:0]                       dbg_sel_idel_dqs,
   input                                    dbg_sel_all_idel_dqs,
   input [DQS_BITS:0]                       dbg_sel_idel_gate,
   input                                    dbg_sel_all_idel_gate,
   output [3:0]                             dbg_calib_done,
   output [3:0]                             dbg_calib_err,
   output [(6*DQ_WIDTH)-1:0]                dbg_calib_dq_tap_cnt,
   output [(6*DQS_WIDTH)-1:0]               dbg_calib_dqs_tap_cnt,
   output [(6*DQS_WIDTH)-1:0]               dbg_calib_gate_tap_cnt,
   output [DQS_WIDTH-1:0]                   dbg_calib_rd_data_sel,
   output [(5*DQS_WIDTH)-1:0]               dbg_calib_rden_dly,
   output [(5*DQS_WIDTH)-1:0]               dbg_calib_gate_dly
   );
 
  wire [30:0]                       af_addr;
  wire [2:0]                        af_cmd;
  wire                              af_empty;
  wire [ROW_WIDTH-1:0]              ctrl_addr;
  wire                              ctrl_af_rden;
  wire [BANK_WIDTH-1:0]             ctrl_ba;
  wire                              ctrl_cas_n;
  wire [CS_NUM-1:0]                 ctrl_cs_n;
  wire                              ctrl_ras_n;
  wire                              ctrl_rden;
  wire                              ctrl_ref_flag;
  wire                              ctrl_we_n;
  wire                              ctrl_wren;
  wire [DQS_WIDTH-1:0]              phy_calib_rden;
  wire [DQS_WIDTH-1:0]              phy_calib_rden_sel;
  wire [DQ_WIDTH-1:0]               rd_data_fall;
  wire [DQ_WIDTH-1:0]               rd_data_rise;
  wire [(2*DQ_WIDTH)-1:0]           wdf_data;
  wire [((2*DQ_WIDTH)/8)-1:0]       wdf_mask_data;
  wire                              wdf_rden;
 
  //***************************************************************************
 
  ddr2_phy_top #
    (
     .BANK_WIDTH            (BANK_WIDTH),
     .CKE_WIDTH             (CKE_WIDTH),
     .CLK_WIDTH             (CLK_WIDTH),
     .COL_WIDTH             (COL_WIDTH),
     .CS_BITS               (CS_BITS),
     .CS_NUM                (CS_NUM),
     .CS_WIDTH              (CS_WIDTH),
     .USE_DM_PORT           (USE_DM_PORT),
     .DM_WIDTH              (DM_WIDTH),
     .DQ_WIDTH              (DQ_WIDTH),
     .DQ_BITS               (DQ_BITS),
     .DQ_PER_DQS            (DQ_PER_DQS),
     .DQS_BITS              (DQS_BITS),
     .DQS_WIDTH             (DQS_WIDTH),
     .HIGH_PERFORMANCE_MODE (HIGH_PERFORMANCE_MODE),
     .IODELAY_GRP           (IODELAY_GRP),
     .ODT_WIDTH             (ODT_WIDTH),
     .ROW_WIDTH             (ROW_WIDTH),
     .TWO_T_TIME_EN         (TWO_T_TIME_EN),
     .ADDITIVE_LAT          (ADDITIVE_LAT),
     .BURST_LEN             (BURST_LEN),
     .BURST_TYPE            (BURST_TYPE),
     .CAS_LAT               (CAS_LAT),
     .ECC_ENABLE            (ECC_ENABLE),
     .ODT_TYPE              (ODT_TYPE),
     .DDR_TYPE              (DDR_TYPE),
     .REDUCE_DRV            (REDUCE_DRV),
     .REG_ENABLE            (REG_ENABLE),
     .TWR                   (TWR),
     .CLK_PERIOD            (CLK_PERIOD),
     .SIM_ONLY              (SIM_ONLY),
     .DEBUG_EN              (DEBUG_EN),
     .FPGA_SPEED_GRADE      (FPGA_SPEED_GRADE)
     )
    u_phy_top
      (
       .clk0                   (clk0),
       .clk90                  (clk90),
       .clkdiv0                (clkdiv0),
       .rst0                   (rst0),
       .rst90                  (rst90),
       .rstdiv0                (rstdiv0),
       .ctrl_wren              (ctrl_wren),
       .ctrl_addr              (ctrl_addr),
       .ctrl_ba                (ctrl_ba),
       .ctrl_ras_n             (ctrl_ras_n),
       .ctrl_cas_n             (ctrl_cas_n),
       .ctrl_we_n              (ctrl_we_n),
       .ctrl_cs_n              (ctrl_cs_n),
       .ctrl_rden              (ctrl_rden),
       .ctrl_ref_flag          (ctrl_ref_flag),
       .wdf_data               (wdf_data),
       .wdf_mask_data          (wdf_mask_data),
       .wdf_rden               (wdf_rden),
       .phy_init_done          (phy_init_done),
       .phy_calib_rden         (phy_calib_rden),
       .phy_calib_rden_sel     (phy_calib_rden_sel),
       .rd_data_rise           (rd_data_rise),
       .rd_data_fall           (rd_data_fall),
       .ddr_ck                 (ddr_ck),
       .ddr_ck_n               (ddr_ck_n),
       .ddr_addr               (ddr_addr),
       .ddr_ba                 (ddr_ba),
       .ddr_ras_n              (ddr_ras_n),
       .ddr_cas_n              (ddr_cas_n),
       .ddr_we_n               (ddr_we_n),
       .ddr_cs_n               (ddr_cs_n),
       .ddr_cke                (ddr_cke),
       .ddr_odt                (ddr_odt),
       .ddr_dm                 (ddr_dm),
       .ddr_dqs                (ddr_dqs),
       .ddr_dqs_n              (ddr_dqs_n),
       .ddr_dq                 (ddr_dq),
       .dbg_idel_up_all        (dbg_idel_up_all),
       .dbg_idel_down_all      (dbg_idel_down_all),
       .dbg_idel_up_dq         (dbg_idel_up_dq),
       .dbg_idel_down_dq       (dbg_idel_down_dq),
       .dbg_idel_up_dqs        (dbg_idel_up_dqs),
       .dbg_idel_down_dqs      (dbg_idel_down_dqs),
       .dbg_idel_up_gate       (dbg_idel_up_gate),
       .dbg_idel_down_gate     (dbg_idel_down_gate),
       .dbg_sel_idel_dq        (dbg_sel_idel_dq),
       .dbg_sel_all_idel_dq    (dbg_sel_all_idel_dq),
       .dbg_sel_idel_dqs       (dbg_sel_idel_dqs),
       .dbg_sel_all_idel_dqs   (dbg_sel_all_idel_dqs),
       .dbg_sel_idel_gate      (dbg_sel_idel_gate),
       .dbg_sel_all_idel_gate  (dbg_sel_all_idel_gate),
       .dbg_calib_done         (dbg_calib_done),
       .dbg_calib_err          (dbg_calib_err),
       .dbg_calib_dq_tap_cnt   (dbg_calib_dq_tap_cnt),
       .dbg_calib_dqs_tap_cnt  (dbg_calib_dqs_tap_cnt),
       .dbg_calib_gate_tap_cnt (dbg_calib_gate_tap_cnt),
       .dbg_calib_rd_data_sel  (dbg_calib_rd_data_sel),
       .dbg_calib_rden_dly     (dbg_calib_rden_dly),
       .dbg_calib_gate_dly     (dbg_calib_gate_dly)
       );
 
  ddr2_usr_top #
    (
     .BANK_WIDTH    (BANK_WIDTH),
     .COL_WIDTH     (COL_WIDTH),
     .CS_BITS       (CS_BITS),
     .DQ_WIDTH      (DQ_WIDTH),
     .DQ_PER_DQS    (DQ_PER_DQS),
     .DQS_WIDTH     (DQS_WIDTH),
     .APPDATA_WIDTH (APPDATA_WIDTH),
     .ECC_ENABLE    (ECC_ENABLE),
     .ROW_WIDTH     (ROW_WIDTH)
     )
    u_usr_top
      (
       .clk0              (clk0),
       .usr_clk (usr_clk), //jb
       .clk90             (clk90),
       .rst0              (rst0),
       .rd_data_in_rise   (rd_data_rise),
       .rd_data_in_fall   (rd_data_fall),
       .phy_calib_rden    (phy_calib_rden),
       .phy_calib_rden_sel(phy_calib_rden_sel),
       .rd_data_valid     (rd_data_valid),
       .rd_ecc_error      (rd_ecc_error),
       .rd_data_fifo_out  (rd_data_fifo_out),
       .app_af_cmd        (app_af_cmd),
       .app_af_addr       (app_af_addr),
       .app_af_wren       (app_af_wren),
       .ctrl_af_rden      (ctrl_af_rden),
       .af_cmd            (af_cmd),
       .af_addr           (af_addr),
       .af_empty          (af_empty),
       .app_af_afull      (app_af_afull),
       .app_wdf_wren      (app_wdf_wren),
       .app_wdf_data      (app_wdf_data),
       .app_wdf_mask_data (app_wdf_mask_data),
       .wdf_rden          (wdf_rden),
       .app_wdf_afull     (app_wdf_afull),
       .wdf_data          (wdf_data),
       .wdf_mask_data     (wdf_mask_data)
       );
 
 
  ddr2_ctrl #
    (
     .BANK_WIDTH    (BANK_WIDTH),
     .COL_WIDTH     (COL_WIDTH),
     .CS_BITS       (CS_BITS),
     .CS_NUM        (CS_NUM),
     .ROW_WIDTH     (ROW_WIDTH),
     .ADDITIVE_LAT  (ADDITIVE_LAT),
     .BURST_LEN     (BURST_LEN),
     .CAS_LAT       (CAS_LAT),
     .ECC_ENABLE    (ECC_ENABLE),
     .REG_ENABLE    (REG_ENABLE),
     .MULTI_BANK_EN (MULTI_BANK_EN),
     .TWO_T_TIME_EN (TWO_T_TIME_EN),
     .TREFI_NS      (TREFI_NS),
     .TRAS          (TRAS),
     .TRCD          (TRCD),
     .TRFC          (TRFC),
     .TRP           (TRP),
     .TRTP          (TRTP),
     .TWR           (TWR),
     .TWTR          (TWTR),
     .CLK_PERIOD    (CLK_PERIOD),
     .DDR_TYPE      (DDR_TYPE)
     )
    u_ctrl
      (
       .clk           (clk0),
       .rst           (rst0),
       .af_cmd        (af_cmd),
       .af_addr       (af_addr),
       .af_empty      (af_empty),
       .phy_init_done (phy_init_done),
       .ctrl_ref_flag (ctrl_ref_flag),
       .ctrl_af_rden  (ctrl_af_rden),
       .ctrl_wren     (ctrl_wren),
       .ctrl_rden     (ctrl_rden),
       .ctrl_addr     (ctrl_addr),
       .ctrl_ba       (ctrl_ba),
       .ctrl_ras_n    (ctrl_ras_n),
       .ctrl_cas_n    (ctrl_cas_n),
       .ctrl_we_n     (ctrl_we_n),
       .ctrl_cs_n     (ctrl_cs_n)
       );
 
endmodule
 

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.