URL
https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk
Subversion Repositories openrisc_2011-10-31
[/] [openrisc/] [trunk/] [orpsocv2/] [boards/] [xilinx/] [ml501/] [rtl/] [verilog/] [xilinx_ddr2/] [ddr2_usr_addr_fifo.v] - Rev 499
Go to most recent revision | Compare with Previous | Blame | View Log
//***************************************************************************** // DISCLAIMER OF LIABILITY // // This file contains proprietary and confidential information of // Xilinx, Inc. ("Xilinx"), that is distributed under a license // from Xilinx, and may be used, copied and/or disclosed only // pursuant to the terms of a valid license agreement with Xilinx. // // XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION // ("MATERIALS") "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER // EXPRESSED, IMPLIED, OR STATUTORY, INCLUDING WITHOUT // LIMITATION, ANY WARRANTY WITH RESPECT TO NONINFRINGEMENT, // MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. Xilinx // does not warrant that functions included in the Materials will // meet the requirements of Licensee, or that the operation of the // Materials will be uninterrupted or error-free, or that defects // in the Materials will be corrected. Furthermore, Xilinx does // not warrant or make any representations regarding use, or the // results of the use, of the Materials in terms of correctness, // accuracy, reliability or otherwise. // // Xilinx products are not designed or intended to be fail-safe, // or for use in any application requiring fail-safe performance, // such as life-support or safety devices or systems, Class III // medical devices, nuclear facilities, applications related to // the deployment of airbags, or any other applications that could // lead to death, personal injury or severe property or // environmental damage (individually and collectively, "critical // applications"). Customer assumes the sole risk and liability // of any use of Xilinx products in critical applications, // subject only to applicable laws and regulations governing // limitations on product liability. // // Copyright 2006, 2007 Xilinx, Inc. // All rights reserved. // // This disclaimer and copyright notice must be retained as part // of this file at all times. //***************************************************************************** // ____ ____ // / /\/ / // /___/ \ / Vendor: Xilinx // \ \ \/ Version: 3.0 // \ \ Application: MIG // / / Filename: ddr2_usr_addr_fifo.v // /___/ /\ Date Last Modified: $Date: 2008/12/23 14:26:01 $ // \ \ / \ Date Created: Mon Aug 28 2006 // \___\/\___\ // //Device: Virtex-5 //Design Name: DDR2 //Purpose: // This module instantiates the block RAM based FIFO to store the user // address and the command information. Also calculates potential bank/row // conflicts by comparing the new address with last address issued. //Reference: //Revision History: //***************************************************************************** `timescale 1ns/1ps module ddr2_usr_addr_fifo # ( // Following parameters are for 72-bit RDIMM design (for ML561 Reference // board design). Actual values may be different. Actual parameters values // are passed from design top module ddr2_mig module. Please refer to // the ddr2_mig module for actual values. parameter BANK_WIDTH = 2, parameter COL_WIDTH = 10, parameter CS_BITS = 0, parameter ROW_WIDTH = 14 ) ( input clk0, input rst0, input usr_clk, input [2:0] app_af_cmd, input [30:0] app_af_addr, input app_af_wren, input ctrl_af_rden, output [2:0] af_cmd, output [30:0] af_addr, output af_empty, output app_af_afull ); wire [35:0] fifo_data_out; reg rst_r; always @(posedge clk0) rst_r <= rst0; //*************************************************************************** assign af_cmd = fifo_data_out[33:31]; assign af_addr = fifo_data_out[30:0]; //*************************************************************************** FIFO36 # ( .ALMOST_EMPTY_OFFSET (13'h0007), .ALMOST_FULL_OFFSET (13'h000F), .DATA_WIDTH (36), .DO_REG (1), .EN_SYN ("FALSE"), // changed to FALSE - jb .FIRST_WORD_FALL_THROUGH ("FALSE") ) u_af ( .ALMOSTEMPTY (), .ALMOSTFULL (app_af_afull), .DO (fifo_data_out[31:0]), .DOP (fifo_data_out[35:32]), .EMPTY (af_empty), .FULL (), .RDCOUNT (), .RDERR (), .WRCOUNT (), .WRERR (), .DI ({app_af_cmd[0],app_af_addr}), .DIP ({2'b00,app_af_cmd[2:1]}), .RDCLK (clk0), .RDEN (ctrl_af_rden), .RST (rst_r), //.WRCLK (clk0), .WRCLK (usr_clk), .WREN (app_af_wren) ); endmodule
Go to most recent revision | Compare with Previous | Blame | View Log