URL
https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk
Subversion Repositories openrisc_2011-10-31
[/] [openrisc/] [trunk/] [orpsocv2/] [boards/] [xilinx/] [ml501/] [sim/] [bin/] [Makefile] - Rev 165
Go to most recent revision | Compare with Previous | Blame | View Log
# Include file for tools, etc (mainly interested in the Xilinx path here)
include ../../../../tools.inc
ORPSOC_ROOT=../../../../..
BOARD=ml501
CUR_DIR=$(shell pwd)
# The root path of the whole project
PROJECT_ROOT =$(CUR_DIR)/$(ORPSOC_ROOT)
SIM_DIR=$(CUR_DIR)/../../sim
BOARD_BENCH_DIR=$(CUR_DIR)/../../bench
BOARD_RTL_DIR=$(CUR_DIR)/../../rtl
BOARD_SW_DIR=$(CUR_DIR)/../../sw
BOARD_SYN_DIR=$(CUR_DIR)/../../syn
# Important!
RTL_TESTBENCH_TOP=ml501_testbench
BENCH_TOP_VERILOG_DIR=$(BOARD_BENCH_DIR)
# Extra defines passed to testbench compilation
# Used here for DDR2 model defines
EXTRA_BENCH_DEFINES=+define+sg37E +define+x16
#MEMORY_MODELS=$(BENCH_VERILOG_DIR)/cy7c1354.v $(BENCH_VERILOG_DIR)/ddr2_model.v
SIMULATOR=vsim
RTL_VERILOG_INCLUDE_DIR =$(BOARD_RTL_DIR)
include $(ORPSOC_ROOT)/sim/bin/Makefile
ifeq ($(VCD), 1)
VOPT_ARGS=+acc=rnp
endif
# Here we re-define the modelsim compilation variable, changing include dirs
# so we use the includes/defines from the board's rtl path instead of the
# normal orpsocv2 bench path.
# Modelsim testench compilation - we change this from the standard makefile
# to change:
# 1) The include directory (should be the board RTL path, not the main RTL path)
# 2) Change the define for the name of the top testbench (board dependent)
# 3) Add the board's testbench paths
# 4) Add the various extra memory models we use (maybe should just use a script for this instead? TODO!)
VSIM_COMPILE_TB = vlog $(BENCH_VERILOG_DIR)/or1200_monitor.v $(BENCH_TOP_VERILOG_DIR)/$(RTL_TESTBENCH_TOP).v
VSIM_COMPILE_TB += +incdir+$(BENCH_VERILOG_DIR) +incdir+$(BENCH_TOP_VERILOG_DIR) +incdir+$(BOARD_RTL_DIR) +incdir+$(XILINX_VERILOG_SRC)
VSIM_COMPILE_TB += +define+TEST_DEFINE_FILE
VSIM_COMPILE_TB += +define+OR1200_TOP=$(RTL_TESTBENCH_TOP).dut.i_or1k.i_or1200_top
VSIM_COMPILE_TB += +define+TESTBENCH_DEFINES=\"$(RTL_TESTBENCH_TOP)_defines.v\"
VSIM_COMPILE_TB += -y $(BENCH_VERILOG_DIR) -y $(BOARD_BENCH_DIR) +libext+.v
VSIM_COMPILE_TB += $(EXTRA_BENCH_DEFINES)
VOPT_STEP=vopt -quiet $(VOPT_ARGS) glbl $(RTL_TESTBENCH_TOP) -L $(MGC_ORPSOC_LIB) -o testbench
SIM_COMMANDRUN= $(VSIM_COMPILE_TB); $(VOPT_STEP); $(VSIM) -c -quiet +nowarnTFMPC -L $(MGC_ORPSOC_LIB) -do "run -all; exit" testbench
# Re-define the command-file generation rule - we add a few extra things to
# our scripts to tell the simulator where the Xilinx tools, other set of
# includes, etc.
$(SIM_RUN_DIR)/$(GENERATED_COMMANDFILE): $(SIM_BIN_DIR)/$(SIM_COMMANDFILE)
$(Q)sed < $(SIM_BIN_DIR)/$(SIM_COMMANDFILE) > $(SIM_RUN_DIR)/$(GENERATED_COMMANDFILE) \
-e s!\$$BENCH_DIR!$(BENCH_VERILOG_DIR)! \
-e s!\$$RTL_DIR!$(RTL_VERILOG_DIR)! \
-e s!\$$BOARD_BENCH_DIR!$(BOARD_BENCH_DIR)! \
-e s!\$$BOARD_RTL_DIR!$(BOARD_RTL_DIR)! \
-e s!\$$BACKEND_DIR!$(BACKEND_DIR)! \
-e s!\$$XILINX_VERILOG_SRC!$(XILINX_VERILOG_SRC)! \
-e \\!^//.*\$$!d -e \\!^\$$!d ; \
echo "+define+TEST_DEFINE_FILE=\"test_define.v\"" >> $(SIM_RUN_DIR)/$(GENERATED_COMMANDFILE); \
if [ ! -z $$VCD ]; \
then echo "+define+VCD" >> $(SIM_RUN_DIR)/$(GENERATED_COMMANDFILE); \
if [ $(SIMULATOR) = $(NCVERILOG) ]; \
then echo "+access+r" >> $(SIM_RUN_DIR)/$(GENERATED_COMMANDFILE); \
fi; \
fi; \
if [ ! -z $$UART_PRINTF ]; \
then echo "+define+UART_PRINTF" >> $(SIM_RUN_DIR)/$(GENERATED_COMMANDFILE); \
fi; \
if [ $(SIMULATOR) = $(NCVERILOG) ]; \
then echo "+nocopyright" >> $(SIM_RUN_DIR)/$(GENERATED_COMMANDFILE); \
echo "+nowarn+MACRDF" >> $(SIM_RUN_DIR)/$(GENERATED_COMMANDFILE); \
fi
# A new set of tests for software which will run only on this board
# eth board test doesn't quit properly for some reason
BOARD_TESTS=boot memtest gpio
rtl-board-tests: $(SIM_RUN_DIR)/$(GENERATED_COMMANDFILE) prepare-sw prepare-rtl prepare-dirs
@echo
@echo "Beginning loop that will complete the following tests for $(BOARD) board: $(BOARD_TESTS)"
@echo
$(Q)for TEST in $(BOARD_TESTS); do \
echo "################################################################################"; \
echo; \
echo "\t#### Current test: $$TEST ####"; echo; \
echo "\t#### Compiling software ####"; echo; \
CURRENT_TEST_SW_DIR=$(BOARD_SW_DIR)/`echo $$TEST | cut -d "-" -f 1`; \
$(MAKE) -C $$CURRENT_TEST_SW_DIR clean $$TEST $(TEST_SW_MAKE_OPTS); \
rm -f $(SIM_RUN_DIR)/$(SIM_FLASH_MEM_FILE); \
rm -f $(SIM_RUN_DIR)/$(SIM_SRAM_MEM_FILE); \
ln -s $$CURRENT_TEST_SW_DIR/$$TEST.vmem $(SIM_RUN_DIR)/$(SIM_SRAM_MEM_FILE); \
echo "\`define TEST_NAME_STRING \"$$TEST\"" > $(SIM_RUN_DIR)/test_define.v; \
echo "\`define TEST_RESULTS_DIR \"$(SIM_RESULTS_DIR)/\" " >> $(SIM_RUN_DIR)/test_define.v; \
if [ ! -z $$VCD ]; \
then echo "\`define VCD" >> $(SIM_RUN_DIR)/test_define.v; \
fi; \
if [ ! -z $$UART_PRINTF ]; \
then echo "\`define UART_PRINTF" >> $(SIM_RUN_DIR)/test_define.v; \
fi; \
if [ -z $$NO_SIM_LOGGING ]; then \
echo "\`define OR1200_DISPLAY_ARCH_STATE" >> $(SIM_RUN_DIR)/test_define.v; \
fi; \
echo ; \
echo "\t#### Compiling RTL ####"; \
$(SIM_COMMANDCOMPILE); \
echo; \
echo "\t#### Beginning simulation ####"; \
time -p $(SIM_COMMANDRUN) ; \
if [ $$? -gt 0 ]; then exit $$?; fi; \
TEST_RESULT=`cat $(SIM_RESULTS_DIR)/$$TEST-general.log | grep report | grep $(SIM_SUCCESS_MESSAGE) -c`; \
echo; echo "\t####"; \
if [ $$TEST_RESULT -gt 0 ]; then \
echo "\t#### Test $$TEST PASSED ####";TESTS_PASSED=`expr $$TESTS_PASSED + 1`;\
else echo "\t#### Test $$TEST FAILED ####";\
fi; \
echo "\t####"; echo; \
TESTS_PERFORMED=`expr $$TESTS_PERFORMED + 1`;\
done; \
echo "Test results: "$$TESTS_PASSED" out of "$$TESTS_PERFORMED" tests passed"; echo
SYN_SIM_COMMANDCOMPILE=if [ ! -e work ]; then vlib work; vlib $(MGC_ORPSOC_LIB); vlog -work $(MGC_ORPSOC_LIB) +libext+.v -y $(XILINX_VERILOG_SRC) +incdir+$(XILINX_VERILOG_SRC) -y $(XILINX_VERILOG_SRC)/unisims +incdir+$(XILINX_VERILOG_SRC)/unisims -y $(XILINX_VERILOG_SRC)/XilinxCoreLib +incdir+$(XILINX_VERILOG_SRC)/XilinxCoreLib $(BOARD_SYN_DIR)/$(BOARD).v $(BOARD_RTL_DIR)/ml501_ddr2_wb_if_cache.v ; fi
syn-board-test: prepare-dirs $(BOARD_SYN_DIR)/$(BOARD).v
$(Q)echo "\`define TEST_NAME_STRING \"ml501-post-synthesis\"" > $(SIM_RUN_DIR)/test_define.v; \
echo "\`define POST_SYNTHESIS_SIM" >> $(SIM_RUN_DIR)/test_define.v; \
echo "\`define TEST_RESULTS_DIR \"$(SIM_RESULTS_DIR)/\" " >> $(SIM_RUN_DIR)/test_define.v; \
if [ ! -z $$VCD ]; \
then echo "\`define VCD" >> $(SIM_RUN_DIR)/test_define.v; \
if [ ! -z $$VCD_DEPTH ]; \
then echo "\`define VCD_DEPTH "$(VCD_DEPTH) >> $(SIM_RUN_DIR)/test_define.v; \
fi; \
fi; \
if [ ! -z $$UART_PRINTF ]; \
then echo "\`define UART_PRINTF" >> $(SIM_RUN_DIR)/test_define.v; \
fi; \
echo "\t#### Compiling RTL ####"; \
$(SYN_SIM_COMMANDCOMPILE); \
echo; \
echo "\t#### Beginning simulation ####"; \
time -p $(SIM_COMMANDRUN) ; \
echo
Go to most recent revision | Compare with Previous | Blame | View Log