URL
https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk
Subversion Repositories openrisc_2011-10-31
[/] [openrisc/] [trunk/] [orpsocv2/] [boards/] [xilinx/] [ml501/] [sw/] [board/] [include/] [board.h] - Rev 439
Go to most recent revision | Compare with Previous | Blame | View Log
#ifndef _BOARD_H_ #define _BOARD_H_ #define IN_CLK 50000000 // Hz // // ROM bootloader // // Uncomment the appropriate bootloader define. This will effect the bootrom.S // file, which is compiled and converted into Verilog for inclusion at // synthesis time. See bootloader/bootloader.S for details on each option. //#define BOOTROM_SPI_FLASH #define BOOTROM_GOTO_RESET //#define BOOTROM_LOOP_AT_ZERO //#define BOOTROM_LOOP_IN_ROM // Address bootloader should start from in FLASH // Last 256KB of 2MB flash - offset 0x1c0000 (2MB-256KB) #define BOOTROM_ADDR_BYTE2 0x1c #define BOOTROM_ADDR_BYTE1 0x00 #define BOOTROM_ADDR_BYTE0 0x00 // Causes SPI bootloader to loop if SPI didn't give correct size of image #define SPI_RETRY_IF_INSANE_SIZEWORD // // Defines for each core (memory map base, OR1200 interrupt line number, etc.) // #define SDRAM_BASE 0x0 #define GPIO_0_BASE 0x91000000 #define UART0_BASE 0x90000000 #define UART0_IRQ 2 #define UART0_BAUD_RATE 115200 #define SPI0_BASE 0xb0000000 #define SPI0_IRQ 6 #define I2C_0_BASE 0xa0000000 #define I2C_0_IRQ 10 #define I2C_1_BASE 0xa1000000 #define I2C_1_IRQ 11 #define ETH0_BASE 0x92000000 #define ETH0_IRQ 4 #define ETH_MACADDR0 0x00 #define ETH_MACADDR1 0x12 #define ETH_MACADDR2 0x34 #define ETH_MACADDR3 0x56 #define ETH_MACADDR4 0x78 #define ETH_MACADDR5 0x9a // // OR1200 tick timer period define // #define TICKS_PER_SEC 100 #endif
Go to most recent revision | Compare with Previous | Blame | View Log