OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [orpsocv2/] [doc/] [Makefile.in] - Rev 583

Go to most recent revision | Compare with Previous | Blame | View Log

# Makefile.in generated by automake 1.11 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
subdir = .
DIST_COMMON = $(am__configure_deps) $(srcdir)/Makefile.am \
        $(srcdir)/Makefile.in $(top_srcdir)/configure install-sh \
        missing texinfo.tex
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
        $(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
SOURCES =
DIST_SOURCES =
INFO_DEPS = $(srcdir)/orpsoc.info
am__TEXINFO_TEX_DIR = $(srcdir)
DVIS = orpsoc.dvi
PDFS = orpsoc.pdf
PSS = orpsoc.ps
HTMLS = orpsoc.html
TEXINFOS = orpsoc.texi
TEXI2DVI = texi2dvi
TEXI2PDF = $(TEXI2DVI) --pdf --batch
MAKEINFOHTML = $(MAKEINFO) --html
AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
DVIPS = dvips
am__installdirs = "$(DESTDIR)$(infodir)"
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
  { test ! -d "$(distdir)" \
    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
         && rm -fr "$(distdir)"; }; }
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
am__leading_dot = @am__leading_dot@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build_alias = @build_alias@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host_alias = @host_alias@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
MAINTAINERCLEANFILES = Makefile.in
info_TEXINFOS = orpsoc.texi
all: all-am

.SUFFIXES:
.SUFFIXES: .dvi .html .info .pdf .ps .texi
am--refresh:
        @:
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
        @for dep in $?; do \
          case '$(am__configure_deps)' in \
            *$$dep*) \
              echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
              $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
                && exit 0; \
              exit 1;; \
          esac; \
        done; \
        echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
        $(am__cd) $(top_srcdir) && \
          $(AUTOMAKE) --foreign Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
        @case '$?' in \
          *config.status*) \
            echo ' $(SHELL) ./config.status'; \
            $(SHELL) ./config.status;; \
          *) \
            echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
            cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
        esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
        $(SHELL) ./config.status --recheck

$(top_srcdir)/configure:  $(am__configure_deps)
        $(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
        $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):

.texi.info:
        restore=: && backupdir="$(am__leading_dot)am$$$$" && \
        am__cwd=`pwd` && $(am__cd) $(srcdir) && \
        rm -rf $$backupdir && mkdir $$backupdir && \
        if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
          for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
            if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
          done; \
        else :; fi && \
        cd "$$am__cwd"; \
        if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
         -o $@ $<; \
        then \
          rc=0; \
          $(am__cd) $(srcdir); \
        else \
          rc=$$?; \
          $(am__cd) $(srcdir) && \
          $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
        fi; \
        rm -rf $$backupdir; exit $$rc

.texi.dvi:
        TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
        MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
        $(TEXI2DVI) $<

.texi.pdf:
        TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
        MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
        $(TEXI2PDF) $<

.texi.html:
        rm -rf $(@:.html=.htp)
        if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
         -o $(@:.html=.htp) $<; \
        then \
          rm -rf $@; \
          if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
            mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
        else \
          if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
            rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
          exit 1; \
        fi
$(srcdir)/orpsoc.info: orpsoc.texi 
orpsoc.dvi: orpsoc.texi 
orpsoc.pdf: orpsoc.texi 
orpsoc.html: orpsoc.texi 
.dvi.ps:
        TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
        $(DVIPS) -o $@ $<

uninstall-dvi-am:
        @$(NORMAL_UNINSTALL)
        @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
        for p in $$list; do \
          $(am__strip_dir) \
          echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
          rm -f "$(DESTDIR)$(dvidir)/$$f"; \
        done

uninstall-html-am:
        @$(NORMAL_UNINSTALL)
        @list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
        for p in $$list; do \
          $(am__strip_dir) \
          echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
          rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
        done

uninstall-info-am:
        @$(PRE_UNINSTALL)
        @if test -d '$(DESTDIR)$(infodir)' && \
            (install-info --version && \
             install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
          list='$(INFO_DEPS)'; \
          for file in $$list; do \
            relfile=`echo "$$file" | sed 's|^.*/||'`; \
            echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
            if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
            then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
          done; \
        else :; fi
        @$(NORMAL_UNINSTALL)
        @list='$(INFO_DEPS)'; \
        for file in $$list; do \
          relfile=`echo "$$file" | sed 's|^.*/||'`; \
          relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
          (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
             echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
             rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
           else :; fi); \
        done

uninstall-pdf-am:
        @$(NORMAL_UNINSTALL)
        @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
        for p in $$list; do \
          $(am__strip_dir) \
          echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
          rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
        done

uninstall-ps-am:
        @$(NORMAL_UNINSTALL)
        @list='$(PSS)'; test -n "$(psdir)" || list=; \
        for p in $$list; do \
          $(am__strip_dir) \
          echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
          rm -f "$(DESTDIR)$(psdir)/$$f"; \
        done

dist-info: $(INFO_DEPS)
        @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
        list='$(INFO_DEPS)'; \
        for base in $$list; do \
          case $$base in \
            $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
          esac; \
          if test -f $$base; then d=.; else d=$(srcdir); fi; \
          base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
          for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
            if test -f $$file; then \
              relfile=`expr "$$file" : "$$d/\(.*\)"`; \
              test -f "$(distdir)/$$relfile" || \
                cp -p $$file "$(distdir)/$$relfile"; \
            else :; fi; \
          done; \
        done

mostlyclean-aminfo:
        -rm -rf orpsoc.aux orpsoc.cp orpsoc.cps orpsoc.fn orpsoc.ky orpsoc.kys \
          orpsoc.log orpsoc.pg orpsoc.pgs orpsoc.tmp orpsoc.toc \
          orpsoc.tp orpsoc.tps orpsoc.vr

clean-aminfo:
        -test -z "orpsoc.dvi orpsoc.pdf orpsoc.ps orpsoc.html" \
        || rm -rf orpsoc.dvi orpsoc.pdf orpsoc.ps orpsoc.html

maintainer-clean-aminfo:
        @list='$(INFO_DEPS)'; for i in $$list; do \
          i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
          echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
          rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
        done
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:


distdir: $(DISTFILES)
        $(am__remove_distdir)
        test -d "$(distdir)" || mkdir "$(distdir)"
        @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
        list='$(DISTFILES)'; \
          dist_files=`for file in $$list; do echo $$file; done | \
          sed -e "s|^$$srcdirstrip/||;t" \
              -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
        case $$dist_files in \
          */*) $(MKDIR_P) `echo "$$dist_files" | \
                           sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
                           sort -u` ;; \
        esac; \
        for file in $$dist_files; do \
          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
          if test -d $$d/$$file; then \
            dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
            if test -d "$(distdir)/$$file"; then \
              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
            fi; \
            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
              cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
            fi; \
            cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
          else \
            test -f "$(distdir)/$$file" \
            || cp -p $$d/$$file "$(distdir)/$$file" \
            || exit 1; \
          fi; \
        done
        $(MAKE) $(AM_MAKEFLAGS) \
          top_distdir="$(top_distdir)" distdir="$(distdir)" \
          dist-info
        -test -n "$(am__skip_mode_fix)" \
        || find "$(distdir)" -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
          ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
          ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
          ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
        || chmod -R a+r "$(distdir)"
dist-gzip: distdir
        tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
        $(am__remove_distdir)

dist-bzip2: distdir
        tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
        $(am__remove_distdir)

dist-lzma: distdir
        tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
        $(am__remove_distdir)

dist-xz: distdir
        tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
        $(am__remove_distdir)

dist-tarZ: distdir
        tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
        $(am__remove_distdir)

dist-shar: distdir
        shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
        $(am__remove_distdir)

dist-zip: distdir
        -rm -f $(distdir).zip
        zip -rq $(distdir).zip $(distdir)
        $(am__remove_distdir)

dist dist-all: distdir
        tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
        $(am__remove_distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
        case '$(DIST_ARCHIVES)' in \
        *.tar.gz*) \
          GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
        *.tar.bz2*) \
          bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
        *.tar.lzma*) \
          unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
        *.tar.xz*) \
          xz -dc $(distdir).tar.xz | $(am__untar) ;;\
        *.tar.Z*) \
          uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
        *.shar.gz*) \
          GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
        *.zip*) \
          unzip $(distdir).zip ;;\
        esac
        chmod -R a-w $(distdir); chmod a+w $(distdir)
        mkdir $(distdir)/_build
        mkdir $(distdir)/_inst
        chmod a-w $(distdir)
        test -d $(distdir)/_build || exit 0; \
        dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
          && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
          && am__cwd=`pwd` \
          && $(am__cd) $(distdir)/_build \
          && ../configure --srcdir=.. --prefix="$$dc_install_base" \
            $(DISTCHECK_CONFIGURE_FLAGS) \
          && $(MAKE) $(AM_MAKEFLAGS) \
          && $(MAKE) $(AM_MAKEFLAGS) dvi \
          && $(MAKE) $(AM_MAKEFLAGS) check \
          && $(MAKE) $(AM_MAKEFLAGS) install \
          && $(MAKE) $(AM_MAKEFLAGS) installcheck \
          && $(MAKE) $(AM_MAKEFLAGS) uninstall \
          && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
                distuninstallcheck \
          && chmod -R a-w "$$dc_install_base" \
          && ({ \
               (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
                    distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
              } || { rm -rf "$$dc_destdir"; exit 1; }) \
          && rm -rf "$$dc_destdir" \
          && $(MAKE) $(AM_MAKEFLAGS) dist \
          && rm -rf $(DIST_ARCHIVES) \
          && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
          && cd "$$am__cwd" \
          || exit 1
        $(am__remove_distdir)
        @(echo "$(distdir) archives ready for distribution: "; \
          list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
          sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
        @$(am__cd) '$(distuninstallcheck_dir)' \
        && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
           || { echo "ERROR: files left after uninstall:" ; \
                if test -n "$(DESTDIR)"; then \
                  echo "  (check DESTDIR support)"; \
                fi ; \
                $(distuninstallcheck_listfiles) ; \
                exit 1; } >&2
distcleancheck: distclean
        @if test '$(srcdir)' = . ; then \
          echo "ERROR: distcleancheck can only run from a VPATH build" ; \
          exit 1 ; \
        fi
        @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
          || { echo "ERROR: files left in build directory after distclean:" ; \
               $(distcleancheck_listfiles) ; \
               exit 1; } >&2
check-am: all-am
check: check-am
all-am: Makefile $(INFO_DEPS)
installdirs:
        for dir in "$(DESTDIR)$(infodir)"; do \
          test -z "$$dir" || $(MKDIR_P) "$$dir"; \
        done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
        $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
          install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
          `test -z '$(STRIP)' || \
            echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
        -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
        @echo "This command is intended for maintainers to use"
        @echo "it deletes files that may require special tools to rebuild."
        -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
clean: clean-am

clean-am: clean-aminfo clean-generic mostlyclean-am

distclean: distclean-am
        -rm -f $(am__CONFIG_DISTCLEAN_FILES)
        -rm -f Makefile
distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am: $(DVIS)

html: html-am

html-am: $(HTMLS)

info: info-am

info-am: $(INFO_DEPS)

install-data-am: install-info-am

install-dvi: install-dvi-am

install-dvi-am: $(DVIS)
        @$(NORMAL_INSTALL)
        test -z "$(dvidir)" || $(MKDIR_P) "$(DESTDIR)$(dvidir)"
        @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
        for p in $$list; do \
          if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
          echo "$$d$$p"; \
        done | $(am__base_list) | \
        while read files; do \
          echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
          $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
        done
install-exec-am:

install-html: install-html-am

install-html-am: $(HTMLS)
        @$(NORMAL_INSTALL)
        test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
        @list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
        for p in $$list; do \
          if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
          $(am__strip_dir) \
          if test -d "$$d$$p"; then \
            echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
            $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
            echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
            $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
          else \
            list2="$$list2 $$d$$p"; \
          fi; \
        done; \
        test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
        while read files; do \
          echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
          $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
        done; }
install-info: install-info-am

install-info-am: $(INFO_DEPS)
        @$(NORMAL_INSTALL)
        test -z "$(infodir)" || $(MKDIR_P) "$(DESTDIR)$(infodir)"
        @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
        list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
        for file in $$list; do \
          case $$file in \
            $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
          esac; \
          if test -f $$file; then d=.; else d=$(srcdir); fi; \
          file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
          for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
                       $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
            if test -f $$ifile; then \
              echo "$$ifile"; \
            else : ; fi; \
          done; \
        done | $(am__base_list) | \
        while read files; do \
          echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
          $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
        @$(POST_INSTALL)
        @if (install-info --version && \
             install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
          list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
          for file in $$list; do \
            relfile=`echo "$$file" | sed 's|^.*/||'`; \
            echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
            install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
          done; \
        else : ; fi
install-man:

install-pdf: install-pdf-am

install-pdf-am: $(PDFS)
        @$(NORMAL_INSTALL)
        test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)"
        @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
        for p in $$list; do \
          if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
          echo "$$d$$p"; \
        done | $(am__base_list) | \
        while read files; do \
          echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
          $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
install-ps: install-ps-am

install-ps-am: $(PSS)
        @$(NORMAL_INSTALL)
        test -z "$(psdir)" || $(MKDIR_P) "$(DESTDIR)$(psdir)"
        @list='$(PSS)'; test -n "$(psdir)" || list=; \
        for p in $$list; do \
          if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
          echo "$$d$$p"; \
        done | $(am__base_list) | \
        while read files; do \
          echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
          $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
installcheck-am:

maintainer-clean: maintainer-clean-am
        -rm -f $(am__CONFIG_DISTCLEAN_FILES)
        -rm -rf $(top_srcdir)/autom4te.cache
        -rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-aminfo \
        maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-aminfo mostlyclean-generic

pdf: pdf-am

pdf-am: $(PDFS)

ps: ps-am

ps-am: $(PSS)

uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
        uninstall-pdf-am uninstall-ps-am

.MAKE: install-am install-strip

.PHONY: all all-am am--refresh check check-am clean clean-aminfo \
        clean-generic dist dist-all dist-bzip2 dist-gzip dist-info \
        dist-lzma dist-shar dist-tarZ dist-xz dist-zip distcheck \
        distclean distclean-generic distcleancheck distdir \
        distuninstallcheck dvi dvi-am html html-am info info-am \
        install install-am install-data install-data-am install-dvi \
        install-dvi-am install-exec install-exec-am install-html \
        install-html-am install-info install-info-am install-man \
        install-pdf install-pdf-am install-ps install-ps-am \
        install-strip installcheck installcheck-am installdirs \
        maintainer-clean maintainer-clean-aminfo \
        maintainer-clean-generic mostlyclean mostlyclean-aminfo \
        mostlyclean-generic pdf pdf-am ps ps-am uninstall uninstall-am \
        uninstall-dvi-am uninstall-html-am uninstall-info-am \
        uninstall-pdf-am uninstall-ps-am


# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.