URL
https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk
Subversion Repositories openrisc_2011-10-31
[/] [openrisc/] [trunk/] [orpsocv2/] [rtl/] [verilog/] [ethmac/] [eth_macstatus.v] - Rev 633
Go to most recent revision | Compare with Previous | Blame | View Log
////////////////////////////////////////////////////////////////////// //// //// //// eth_macstatus.v //// //// //// //// This file is part of the Ethernet IP core project //// //// http://www.opencores.org/project,ethmac //// //// //// //// Author(s): //// //// - Igor Mohor (igorM@opencores.org) //// //// //// //// All additional information is available in the Readme.txt //// //// file. //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2001, 2002 Authors //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // // CVS Revision History // // $Log: not supported by cvs2svn $ // Revision 1.16 2005/02/21 10:42:11 igorm // Defer indication fixed. // // Revision 1.15 2003/01/30 13:28:19 tadejm // Defer indication changed. // // Revision 1.14 2002/11/22 01:57:06 mohor // Rx Flow control fixed. CF flag added to the RX buffer descriptor. RxAbort // synchronized. // // Revision 1.13 2002/11/13 22:30:58 tadejm // Late collision is reported only when not in the full duplex. // Sample is taken (for status) as soon as MRxDV is not valid (regardless // of the received byte cnt). // // Revision 1.12 2002/09/12 14:50:16 mohor // CarrierSenseLost bug fixed when operating in full duplex mode. // // Revision 1.11 2002/09/04 18:38:03 mohor // CarrierSenseLost status is not set when working in loopback mode. // // Revision 1.10 2002/07/25 18:17:46 mohor // InvalidSymbol generation changed. // // Revision 1.9 2002/04/22 13:51:44 mohor // Short frame and ReceivedLengthOK were not detected correctly. // // Revision 1.8 2002/02/18 10:40:17 mohor // Small fixes. // // Revision 1.7 2002/02/15 17:07:39 mohor // Status was not written correctly when frames were discarted because of // address mismatch. // // Revision 1.6 2002/02/11 09:18:21 mohor // Tx status is written back to the BD. // // Revision 1.5 2002/02/08 16:21:54 mohor // Rx status is written back to the BD. // // Revision 1.4 2002/01/23 10:28:16 mohor // Link in the header changed. // // Revision 1.3 2001/10/19 08:43:51 mohor // eth_timescale.v changed to timescale.v This is done because of the // simulation of the few cores in a one joined project. // // Revision 1.2 2001/09/11 14:17:00 mohor // Few little NCSIM warnings fixed. // // Revision 1.1 2001/08/06 14:44:29 mohor // A define FPGA added to select between Artisan RAM (for ASIC) and Block Ram (For Virtex). // Include files fixed to contain no path. // File names and module names changed ta have a eth_ prologue in the name. // File eth_timescale.v is used to define timescale // All pin names on the top module are changed to contain _I, _O or _OE at the end. // Bidirectional signal MDIO is changed to three signals (Mdc_O, Mdi_I, Mdo_O // and Mdo_OE. The bidirectional signal must be created on the top level. This // is done due to the ASIC tools. // // Revision 1.1 2001/07/30 21:23:42 mohor // Directory structure changed. Files checked and joind together. // // // // // `include "timescale.v" module eth_macstatus( MRxClk, Reset, ReceivedLengthOK, ReceiveEnd, ReceivedPacketGood, RxCrcError, MRxErr, MRxDV, RxStateSFD, RxStateData, RxStatePreamble, RxStateIdle, Transmitting, RxByteCnt, RxByteCntEq0, RxByteCntGreat2, RxByteCntMaxFrame, InvalidSymbol, MRxD, LatchedCrcError, Collision, CollValid, RxLateCollision, r_RecSmall, r_MinFL, r_MaxFL, ShortFrame, DribbleNibble, ReceivedPacketTooBig, r_HugEn, LoadRxStatus, StartTxDone, StartTxAbort, RetryCnt, RetryCntLatched, MTxClk, MaxCollisionOccured, RetryLimit, LateCollision, LateCollLatched, DeferIndication, DeferLatched, RstDeferLatched, TxStartFrm, StatePreamble, StateData, CarrierSense, CarrierSenseLost, TxUsedData, LatchedMRxErr, Loopback, r_FullD ); input MRxClk; input Reset; input RxCrcError; input MRxErr; input MRxDV; input RxStateSFD; input [1:0] RxStateData; input RxStatePreamble; input RxStateIdle; input Transmitting; input [15:0] RxByteCnt; input RxByteCntEq0; input RxByteCntGreat2; input RxByteCntMaxFrame; input [3:0] MRxD; input Collision; input [5:0] CollValid; input r_RecSmall; input [15:0] r_MinFL; input [15:0] r_MaxFL; input r_HugEn; input StartTxDone; input StartTxAbort; input [3:0] RetryCnt; input MTxClk; input MaxCollisionOccured; input LateCollision; input DeferIndication; input TxStartFrm; input StatePreamble; input [1:0] StateData; input CarrierSense; input TxUsedData; input Loopback; input r_FullD; output ReceivedLengthOK; output ReceiveEnd; output ReceivedPacketGood; output InvalidSymbol; output LatchedCrcError; output RxLateCollision; output ShortFrame; output DribbleNibble; output ReceivedPacketTooBig; output LoadRxStatus; output [3:0] RetryCntLatched; output RetryLimit; output LateCollLatched; output DeferLatched; input RstDeferLatched; output CarrierSenseLost; output LatchedMRxErr; reg ReceiveEnd; reg LatchedCrcError; reg LatchedMRxErr; reg LoadRxStatus; reg InvalidSymbol; reg [3:0] RetryCntLatched; reg RetryLimit; reg LateCollLatched; reg DeferLatched; reg CarrierSenseLost; wire TakeSample; wire SetInvalidSymbol; // Invalid symbol was received during reception in 100Mbps // Crc error always @ (posedge MRxClk or posedge Reset) begin if(Reset) LatchedCrcError <= 1'b0; else if(RxStateSFD) LatchedCrcError <= 1'b0; else if(RxStateData[0]) LatchedCrcError <= RxCrcError & ~RxByteCntEq0; end // LatchedMRxErr always @ (posedge MRxClk or posedge Reset) begin if(Reset) LatchedMRxErr <= 1'b0; else if(MRxErr & MRxDV & (RxStatePreamble | RxStateSFD | (|RxStateData) | RxStateIdle & ~Transmitting)) LatchedMRxErr <= 1'b1; else LatchedMRxErr <= 1'b0; end // ReceivedPacketGood assign ReceivedPacketGood = ~LatchedCrcError; // ReceivedLengthOK assign ReceivedLengthOK = RxByteCnt[15:0] >= r_MinFL[15:0] & RxByteCnt[15:0] <= r_MaxFL[15:0]; // Time to take a sample //assign TakeSample = |RxStateData & ~MRxDV & RxByteCntGreat2 | assign TakeSample = (|RxStateData) & (~MRxDV) | RxStateData[0] & MRxDV & RxByteCntMaxFrame; // LoadRxStatus always @ (posedge MRxClk or posedge Reset) begin if(Reset) LoadRxStatus <= 1'b0; else LoadRxStatus <= TakeSample; end // ReceiveEnd always @ (posedge MRxClk or posedge Reset) begin if(Reset) ReceiveEnd <= 1'b0; else ReceiveEnd <= LoadRxStatus; end // Invalid Symbol received during 100Mbps mode assign SetInvalidSymbol = MRxDV & MRxErr & MRxD[3:0] == 4'he; // InvalidSymbol always @ (posedge MRxClk or posedge Reset) begin if(Reset) InvalidSymbol <= 1'b0; else if(LoadRxStatus & ~SetInvalidSymbol) InvalidSymbol <= 1'b0; else if(SetInvalidSymbol) InvalidSymbol <= 1'b1; end // Late Collision reg RxLateCollision; reg RxColWindow; // Collision Window always @ (posedge MRxClk or posedge Reset) begin if(Reset) RxLateCollision <= 1'b0; else if(LoadRxStatus) RxLateCollision <= 1'b0; else if(Collision & (~r_FullD) & (~RxColWindow | r_RecSmall)) RxLateCollision <= 1'b1; end // Collision Window always @ (posedge MRxClk or posedge Reset) begin if(Reset) RxColWindow <= 1'b1; else if(~Collision & RxByteCnt[5:0] == CollValid[5:0] & RxStateData[1]) RxColWindow <= 1'b0; else if(RxStateIdle) RxColWindow <= 1'b1; end // ShortFrame reg ShortFrame; always @ (posedge MRxClk or posedge Reset) begin if(Reset) ShortFrame <= 1'b0; else if(LoadRxStatus) ShortFrame <= 1'b0; else if(TakeSample) ShortFrame <= RxByteCnt[15:0] < r_MinFL[15:0]; end // DribbleNibble reg DribbleNibble; always @ (posedge MRxClk or posedge Reset) begin if(Reset) DribbleNibble <= 1'b0; else if(RxStateSFD) DribbleNibble <= 1'b0; else if(~MRxDV & RxStateData[1]) DribbleNibble <= 1'b1; end reg ReceivedPacketTooBig; always @ (posedge MRxClk or posedge Reset) begin if(Reset) ReceivedPacketTooBig <= 1'b0; else if(LoadRxStatus) ReceivedPacketTooBig <= 1'b0; else if(TakeSample) ReceivedPacketTooBig <= ~r_HugEn & RxByteCnt[15:0] > r_MaxFL[15:0]; end // Latched Retry counter for tx status always @ (posedge MTxClk or posedge Reset) begin if(Reset) RetryCntLatched <= 4'h0; else if(StartTxDone | StartTxAbort) RetryCntLatched <= RetryCnt; end // Latched Retransmission limit always @ (posedge MTxClk or posedge Reset) begin if(Reset) RetryLimit <= 1'h0; else if(StartTxDone | StartTxAbort) RetryLimit <= MaxCollisionOccured; end // Latched Late Collision always @ (posedge MTxClk or posedge Reset) begin if(Reset) LateCollLatched <= 1'b0; else if(StartTxDone | StartTxAbort) LateCollLatched <= LateCollision; end // Latched Defer state always @ (posedge MTxClk or posedge Reset) begin if(Reset) DeferLatched <= 1'b0; else if(DeferIndication) DeferLatched <= 1'b1; else if(RstDeferLatched) DeferLatched <= 1'b0; end // CarrierSenseLost always @ (posedge MTxClk or posedge Reset) begin if(Reset) CarrierSenseLost <= 1'b0; else if((StatePreamble | (|StateData)) & ~CarrierSense & ~Loopback & ~Collision & ~r_FullD) CarrierSenseLost <= 1'b1; else if(TxStartFrm) CarrierSenseLost <= 1'b0; end endmodule
Go to most recent revision | Compare with Previous | Blame | View Log