URL
https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk
Subversion Repositories openrisc_2011-10-31
[/] [openrisc/] [trunk/] [orpsocv2/] [rtl/] [verilog/] [ethmac/] [eth_rxaddrcheck.v] - Rev 602
Go to most recent revision | Compare with Previous | Blame | View Log
////////////////////////////////////////////////////////////////////// //// //// //// eth_rxaddrcheck.v //// //// //// //// This file is part of the Ethernet IP core project //// //// http://www.opencores.org/cores/ethmac/ //// //// //// //// Author(s): //// //// - Bill Dittenhofer (billditt@aol.com) //// //// //// //// All additional information is avaliable in the Readme.txt //// //// file. //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2001 Authors //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // // CVS Revision History // // $Log: not supported by cvs2svn $ // Revision 1.8 2002/11/19 17:34:52 mohor // AddressMiss status is connecting to the Rx BD. AddressMiss is identifying // that a frame was received because of the promiscous mode. // // Revision 1.7 2002/09/04 18:41:06 mohor // Bug when last byte of destination address was not checked fixed. // // Revision 1.6 2002/03/20 15:14:11 mohor // When in promiscous mode some frames were not received correctly. Fixed. // // Revision 1.5 2002/03/02 21:06:32 mohor // Log info was missing. // // // Revision 1.1 2002/02/08 12:51:54 ditt // Initial release of the ethernet addresscheck module. // // // // // `include "timescale.v" module eth_rxaddrcheck(MRxClk, Reset, RxData, Broadcast ,r_Bro ,r_Pro, ByteCntEq2, ByteCntEq3, ByteCntEq4, ByteCntEq5, ByteCntEq6, ByteCntEq7, HASH0, HASH1, CrcHash, CrcHashGood, StateData, RxEndFrm, Multicast, MAC, RxAbort, AddressMiss, PassAll, ControlFrmAddressOK ); parameter Tp = 1; input MRxClk; input Reset; input [7:0] RxData; input Broadcast; input r_Bro; input r_Pro; input ByteCntEq2; input ByteCntEq3; input ByteCntEq4; input ByteCntEq5; input ByteCntEq6; input ByteCntEq7; input [31:0] HASH0; input [31:0] HASH1; input [5:0] CrcHash; input CrcHashGood; input Multicast; input [47:0] MAC; input [1:0] StateData; input RxEndFrm; input PassAll; input ControlFrmAddressOK; output RxAbort; output AddressMiss; wire BroadcastOK; wire ByteCntEq2; wire ByteCntEq3; wire ByteCntEq4; wire ByteCntEq5; wire RxAddressInvalid; wire RxCheckEn; wire HashBit; wire [31:0] IntHash; reg [7:0] ByteHash; reg MulticastOK; reg UnicastOK; reg RxAbort; reg AddressMiss; assign RxAddressInvalid = ~(UnicastOK | BroadcastOK | MulticastOK | r_Pro); assign BroadcastOK = Broadcast & ~r_Bro; assign RxCheckEn = | StateData; // Address Error Reported at end of address cycle // RxAbort clears after one cycle always @ (posedge MRxClk or posedge Reset) begin if(Reset) RxAbort <= 1'b0; else if(RxAddressInvalid & ByteCntEq7 & RxCheckEn) RxAbort <= 1'b1; else RxAbort <= 1'b0; end // This ff holds the "Address Miss" information that is written to the RX BD status. always @ (posedge MRxClk or posedge Reset) begin if(Reset) AddressMiss <= 1'b0; else if(ByteCntEq7 & RxCheckEn) AddressMiss <= (~(UnicastOK | BroadcastOK | MulticastOK | (PassAll & ControlFrmAddressOK))); end // Hash Address Check, Multicast always @ (posedge MRxClk or posedge Reset) begin if(Reset) MulticastOK <= 1'b0; else if(RxEndFrm | RxAbort) MulticastOK <= 1'b0; else if(CrcHashGood & Multicast) MulticastOK <= HashBit; end // Address Detection (unicast) // start with ByteCntEq2 due to delay of addres from RxData always @ (posedge MRxClk or posedge Reset) begin if(Reset) UnicastOK <= 1'b0; else if(RxCheckEn & ByteCntEq2) UnicastOK <= RxData[7:0] == MAC[47:40]; else if(RxCheckEn & ByteCntEq3) UnicastOK <= ( RxData[7:0] == MAC[39:32]) & UnicastOK; else if(RxCheckEn & ByteCntEq4) UnicastOK <= ( RxData[7:0] == MAC[31:24]) & UnicastOK; else if(RxCheckEn & ByteCntEq5) UnicastOK <= ( RxData[7:0] == MAC[23:16]) & UnicastOK; else if(RxCheckEn & ByteCntEq6) UnicastOK <= ( RxData[7:0] == MAC[15:8]) & UnicastOK; else if(RxCheckEn & ByteCntEq7) UnicastOK <= ( RxData[7:0] == MAC[7:0]) & UnicastOK; else if(RxEndFrm | RxAbort) UnicastOK <= 1'b0; end assign IntHash = (CrcHash[5])? HASH1 : HASH0; always@(CrcHash or IntHash) begin case(CrcHash[4:3]) 2'b00: ByteHash = IntHash[7:0]; 2'b01: ByteHash = IntHash[15:8]; 2'b10: ByteHash = IntHash[23:16]; 2'b11: ByteHash = IntHash[31:24]; endcase end assign HashBit = ByteHash[CrcHash[2:0]]; endmodule
Go to most recent revision | Compare with Previous | Blame | View Log