URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [orpsocv2/] [rtl/] [verilog/] [ethmac/] [eth_txcounters.v] - Rev 560
Go to most recent revision | Compare with Previous | Blame | View Log
////////////////////////////////////////////////////////////////////// //// //// //// eth_txcounters.v //// //// //// //// This file is part of the Ethernet IP core project //// //// http://www.opencores.org/project,ethmac //// //// //// //// Author(s): //// //// - Igor Mohor (igorM@opencores.org) //// //// - Novan Hartadi (novan@vlsi.itb.ac.id) //// //// - Mahmud Galela (mgalela@vlsi.itb.ac.id) //// //// //// //// All additional information is avaliable in the Readme.txt //// //// file. //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2001 Authors //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // // CVS Revision History // // $Log: not supported by cvs2svn $ // Revision 1.5 2002/04/22 14:54:14 mohor // FCS should not be included in NibbleMinFl. // // Revision 1.4 2002/01/23 10:28:16 mohor // Link in the header changed. // // Revision 1.3 2001/10/19 08:43:51 mohor // eth_timescale.v changed to timescale.v This is done because of the // simulation of the few cores in a one joined project. // // Revision 1.2 2001/09/11 14:17:00 mohor // Few little NCSIM warnings fixed. // // Revision 1.1 2001/08/06 14:44:29 mohor // A define FPGA added to select between Artisan RAM (for ASIC) and Block Ram (For Virtex). // Include files fixed to contain no path. // File names and module names changed ta have a eth_ prologue in the name. // File eth_timescale.v is used to define timescale // All pin names on the top module are changed to contain _I, _O or _OE at the end. // Bidirectional signal MDIO is changed to three signals (Mdc_O, Mdi_I, Mdo_O // and Mdo_OE. The bidirectional signal must be created on the top level. This // is done due to the ASIC tools. // // Revision 1.1 2001/07/30 21:23:42 mohor // Directory structure changed. Files checked and joind together. // // Revision 1.4 2001/06/27 21:27:45 mohor // Few typos fixed. // // Revision 1.2 2001/06/19 10:38:07 mohor // Minor changes in header. // // Revision 1.1 2001/06/19 10:27:57 mohor // TxEthMAC initial release. // // // `include "timescale.v" module eth_txcounters (StatePreamble, StateIPG, StateData, StatePAD, StateFCS, StateJam, StateBackOff, StateDefer, StateIdle, StartDefer, StartIPG, StartFCS, StartJam, StartBackoff, TxStartFrm, MTxClk, Reset, MinFL, MaxFL, HugEn, ExDfrEn, PacketFinished_q, DlyCrcEn, StateSFD, ByteCnt, NibCnt, ExcessiveDefer, NibCntEq7, NibCntEq15, MaxFrame, NibbleMinFl, DlyCrcCnt ); parameter Tp = 1; input MTxClk; // Tx clock input Reset; // Reset input StatePreamble; // Preamble state input StateIPG; // IPG state input [1:0] StateData; // Data state input StatePAD; // PAD state input StateFCS; // FCS state input StateJam; // Jam state input StateBackOff; // Backoff state input StateDefer; // Defer state input StateIdle; // Idle state input StateSFD; // SFD state input StartDefer; // Defer state will be activated in next clock input StartIPG; // IPG state will be activated in next clock input StartFCS; // FCS state will be activated in next clock input StartJam; // Jam state will be activated in next clock input StartBackoff; // Backoff state will be activated in next clock input TxStartFrm; // Tx start frame input [15:0] MinFL; // Minimum frame length (in bytes) input [15:0] MaxFL; // Miximum frame length (in bytes) input HugEn; // Pakets bigger then MaxFL enabled input ExDfrEn; // Excessive deferral enabled input PacketFinished_q; input DlyCrcEn; // Delayed CRC enabled output [15:0] ByteCnt; // Byte counter output [15:0] NibCnt; // Nibble counter output ExcessiveDefer; // Excessive Deferral occuring output NibCntEq7; // Nibble counter is equal to 7 output NibCntEq15; // Nibble counter is equal to 15 output MaxFrame; // Maximum frame occured output NibbleMinFl; // Nibble counter is greater than the minimum frame length output [2:0] DlyCrcCnt; // Delayed CRC Count wire ExcessiveDeferCnt; wire ResetNibCnt; wire IncrementNibCnt; wire ResetByteCnt; wire IncrementByteCnt; wire ByteCntMax; reg [15:0] NibCnt; reg [15:0] ByteCnt; reg [2:0] DlyCrcCnt; assign IncrementNibCnt = StateIPG | StatePreamble | (|StateData) | StatePAD | StateFCS | StateJam | StateBackOff | StateDefer & ~ExcessiveDefer & TxStartFrm; assign ResetNibCnt = StateDefer & ExcessiveDefer & ~TxStartFrm | StatePreamble & NibCntEq15 | StateJam & NibCntEq7 | StateIdle | StartDefer | StartIPG | StartFCS | StartJam; // Nibble Counter always @ (posedge MTxClk or posedge Reset) begin if(Reset) NibCnt <= 16'h0; else begin if(ResetNibCnt) NibCnt <= 16'h0; else if(IncrementNibCnt) NibCnt <= NibCnt + 16'd1; end end assign NibCntEq7 = &NibCnt[2:0]; assign NibCntEq15 = &NibCnt[3:0]; assign NibbleMinFl = NibCnt >= (((MinFL-16'd4)<<1) -1); // FCS should not be included in NibbleMinFl assign ExcessiveDeferCnt = NibCnt[13:0] == 14'h17b7; assign ExcessiveDefer = NibCnt[13:0] == 14'h17b7 & ~ExDfrEn; // 6071 nibbles assign IncrementByteCnt = StateData[1] & ~ByteCntMax | StateBackOff & (&NibCnt[6:0]) | (StatePAD | StateFCS) & NibCnt[0] & ~ByteCntMax; assign ResetByteCnt = StartBackoff | StateIdle & TxStartFrm | PacketFinished_q; // Transmit Byte Counter always @ (posedge MTxClk or posedge Reset) begin if(Reset) ByteCnt[15:0] <= 16'h0; else begin if(ResetByteCnt) ByteCnt[15:0] <= 16'h0; else if(IncrementByteCnt) ByteCnt[15:0] <= ByteCnt[15:0] + 16'd1; end end assign MaxFrame = ByteCnt[15:0] == MaxFL[15:0] & ~HugEn; assign ByteCntMax = &ByteCnt[15:0]; // Delayed CRC counter always @ (posedge MTxClk or posedge Reset) begin if(Reset) DlyCrcCnt <= 3'h0; else begin if(StateData[1] & DlyCrcCnt == 3'h4 | StartJam | PacketFinished_q) DlyCrcCnt <= 3'h0; else if(DlyCrcEn & (StateSFD | StateData[1] & (|DlyCrcCnt[2:0]))) DlyCrcCnt <= DlyCrcCnt + 3'd1; end end endmodule
Go to most recent revision | Compare with Previous | Blame | View Log