URL
https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk
Subversion Repositories openrisc_me
[/] [openrisc/] [trunk/] [orpsocv2/] [rtl/] [verilog/] [include/] [orpsoc-params.v] - Rev 387
Go to most recent revision | Compare with Previous | Blame | View Log
////////////////////////////////////////////////////////////////////// //// //// //// orpsoc-params //// //// //// //// Top level ORPSoC parameters file //// //// //// //// Included in toplevel and testbench //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2009, 2010 Authors and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// /////////////////////////// // // // Peripheral parameters // // // /////////////////////////// // UART 0 params parameter wbs_d_uart0_data_width = 8; parameter uart0_wb_adr = 8'h90; parameter uart0_data_width = 8; parameter uart0_addr_width = 3; // ROM parameter wbs_i_rom0_data_width = 32; parameter wbs_i_rom0_addr_width = 6; parameter rom0_wb_adr = 4'hf; ////////////////////////////////////////////////////// // // // Wishbone bus parameters // // // ////////////////////////////////////////////////////// //////////////////////// // // // Arbiter parameters // // // //////////////////////// parameter wb_dw = 32; // Default Wishbone full word width parameter wb_aw = 32; // Default Wishbone full address width /////////////////////////// // // // Instruction bus // // // /////////////////////////// parameter ibus_arb_addr_match_width = 4; // Slave addresses parameter ibus_arb_slave0_adr = rom0_wb_adr; // ROM parameter ibus_arb_slave1_adr = 4'h0; // Main memory /////////////////////////// // // // Data bus // // // /////////////////////////// // Has auto foward to last slave when no address hits parameter dbus_arb_wb_addr_match_width = 8; parameter dbus_arb_wb_num_slaves = 2; // Slave addresses parameter dbus_arb_slave0_adr = 4'h0; // Main memory (SDRAM/FPGA SRAM) parameter dbus_arb_slave1_adr = 8'hxx; // Default slave - address don't care (X) /////////////////////////////// // // // Byte-wide peripheral bus // // // /////////////////////////////// parameter bbus_arb_wb_addr_match_width = 8; parameter bbus_arb_wb_num_slaves = 1; // Update this when changing slaves! // Slave addresses parameter bbus_arb_slave0_adr = uart0_wb_adr; parameter bbus_arb_slave1_adr = 0 /* UNASSIGNED */; parameter bbus_arb_slave2_adr = 0 /* UNASSIGNED */; parameter bbus_arb_slave3_adr = 0 /* UNASSIGNED */; parameter bbus_arb_slave4_adr = 0 /* UNASSIGNED */; parameter bbus_arb_slave5_adr = 0 /* UNASSIGNED */; parameter bbus_arb_slave6_adr = 0 /* UNASSIGNED */; parameter bbus_arb_slave7_adr = 0 /* UNASSIGNED */; parameter bbus_arb_slave8_adr = 0 /* UNASSIGNED */; parameter bbus_arb_slave9_adr = 0 /* UNASSIGNED */; parameter bbus_arb_slave10_adr = 0 /* UNASSIGNED */; parameter bbus_arb_slave11_adr = 0 /* UNASSIGNED */; parameter bbus_arb_slave12_adr = 0 /* UNASSIGNED */; parameter bbus_arb_slave13_adr = 0 /* UNASSIGNED */; parameter bbus_arb_slave14_adr = 0 /* UNASSIGNED */; parameter bbus_arb_slave15_adr = 0 /* UNASSIGNED */; parameter bbus_arb_slave16_adr = 0 /* UNASSIGNED */; parameter bbus_arb_slave17_adr = 0 /* UNASSIGNED */; parameter bbus_arb_slave18_adr = 0 /* UNASSIGNED */; parameter bbus_arb_slave19_adr = 0 /* UNASSIGNED */;
Go to most recent revision | Compare with Previous | Blame | View Log