OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [orpsocv2/] [rtl/] [verilog/] [or1200/] [or1200_operandmuxes.v] - Rev 854

Go to most recent revision | Compare with Previous | Blame | View Log

//////////////////////////////////////////////////////////////////////
////                                                              ////
////  OR1200's register file read operands mux                    ////
////                                                              ////
////  This file is part of the OpenRISC 1200 project              ////
////  http://www.opencores.org/project,or1k                       ////
////                                                              ////
////  Description                                                 ////
////  Mux for two register file read operands.                    ////
////                                                              ////
////  To Do:                                                      ////
////   - make it smaller and faster                               ////
////                                                              ////
////  Author(s):                                                  ////
////      - Damjan Lampret, lampret@opencores.org                 ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// Copyright (C) 2000 Authors and OPENCORES.ORG                 ////
////                                                              ////
//// This source file may be used and distributed without         ////
//// restriction provided that this copyright statement is not    ////
//// removed from the file and that any derivative work contains  ////
//// the original copyright notice and the associated disclaimer. ////
////                                                              ////
//// This source file is free software; you can redistribute it   ////
//// and/or modify it under the terms of the GNU Lesser General   ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any   ////
//// later version.                                               ////
////                                                              ////
//// This source is distributed in the hope that it will be       ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
//// PURPOSE.  See the GNU Lesser General Public License for more ////
//// details.                                                     ////
////                                                              ////
//// You should have received a copy of the GNU Lesser General    ////
//// Public License along with this source; if not, download it   ////
//// from http://www.opencores.org/lgpl.shtml                     ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
//
// $Log: or1200_operandmuxes.v,v $
// Revision 2.0  2010/06/30 11:00:00  ORSoC
// Minor update: 
// Bugs fixed. 
 
// synopsys translate_off
`include "timescale.v"
// synopsys translate_on
`include "or1200_defines.v"
 
module or1200_operandmuxes(
	// Clock and reset
	clk, rst,
 
	// Internal i/f
	id_freeze, ex_freeze, rf_dataa, rf_datab, ex_forw, wb_forw,
	simm, sel_a, sel_b, operand_a, operand_b, muxed_a, muxed_b
);
 
parameter width = `OR1200_OPERAND_WIDTH;
 
//
// I/O
//
input				clk;
input				rst;
input				id_freeze;
input				ex_freeze;
input	[width-1:0]		rf_dataa;
input	[width-1:0]		rf_datab;
input	[width-1:0]		ex_forw;
input	[width-1:0]		wb_forw;
input	[width-1:0]		simm;
input	[`OR1200_SEL_WIDTH-1:0]	sel_a;
input	[`OR1200_SEL_WIDTH-1:0]	sel_b;
output	[width-1:0]		operand_a;
output	[width-1:0]		operand_b;
output	[width-1:0]		muxed_a;
output	[width-1:0]		muxed_b;
 
//
// Internal wires and regs
//
reg	[width-1:0]		operand_a;
reg	[width-1:0]		operand_b;
reg	[width-1:0]		muxed_a;
reg	[width-1:0]		muxed_b;
reg				saved_a;
reg				saved_b;
 
//
// Operand A register
//
always @(posedge clk or `OR1200_RST_EVENT rst) begin
	if (rst == `OR1200_RST_VALUE) begin
		operand_a <=  32'd0;
		saved_a <=  1'b0;
	end else if (!ex_freeze && id_freeze && !saved_a) begin
		operand_a <=  muxed_a;
		saved_a <=  1'b1;
	end else if (!ex_freeze && !saved_a) begin
		operand_a <=  muxed_a;
	end else if (!ex_freeze && !id_freeze)
		saved_a <=  1'b0;
end
 
//
// Operand B register
//
always @(posedge clk or `OR1200_RST_EVENT rst) begin
	if (rst == `OR1200_RST_VALUE) begin
		operand_b <=  32'd0;
		saved_b <=  1'b0;
	end else if (!ex_freeze && id_freeze && !saved_b) begin
		operand_b <=  muxed_b;
		saved_b <=  1'b1;
	end else if (!ex_freeze && !saved_b) begin
		operand_b <=  muxed_b;
	end else if (!ex_freeze && !id_freeze)
		saved_b <=  1'b0;
end
 
//
// Forwarding logic for operand A register
//
always @(ex_forw or wb_forw or rf_dataa or sel_a) begin
`ifdef OR1200_ADDITIONAL_SYNOPSYS_DIRECTIVES
	casez (sel_a)	// synopsys parallel_case infer_mux
`else
	casez (sel_a)	// synopsys parallel_case
`endif
		`OR1200_SEL_EX_FORW:
			muxed_a = ex_forw;
		`OR1200_SEL_WB_FORW:
			muxed_a = wb_forw;
		default:
			muxed_a = rf_dataa;
	endcase
end
 
//
// Forwarding logic for operand B register
//
always @(simm or ex_forw or wb_forw or rf_datab or sel_b) begin
`ifdef OR1200_ADDITIONAL_SYNOPSYS_DIRECTIVES
	casez (sel_b)	// synopsys parallel_case infer_mux
`else
	casez (sel_b)	// synopsys parallel_case
`endif
		`OR1200_SEL_IMM:
			muxed_b = simm;
		`OR1200_SEL_EX_FORW:
			muxed_b = ex_forw;
		`OR1200_SEL_WB_FORW:
			muxed_b = wb_forw;
		default:
			muxed_b = rf_datab;
	endcase
end
 
endmodule
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.