URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [orpsocv2/] [rtl/] [verilog/] [or1200/] [or1200_pic.v] - Rev 751
Go to most recent revision | Compare with Previous | Blame | View Log
////////////////////////////////////////////////////////////////////// //// //// //// OR1200's Programmable Interrupt Controller //// //// //// //// This file is part of the OpenRISC 1200 project //// //// http://www.opencores.org/project,or1k //// //// //// //// Description //// //// PIC according to OR1K architectural specification. //// //// //// //// To Do: //// //// None //// //// //// //// Author(s): //// //// - Damjan Lampret, lampret@opencores.org //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2000 Authors and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // // $Log: or1200_pic.v,v $ // Revision 2.0 2010/06/30 11:00:00 ORSoC // // synopsys translate_off `include "timescale.v" // synopsys translate_on `include "or1200_defines.v" module or1200_pic( // RISC Internal Interface clk, rst, spr_cs, spr_write, spr_addr, spr_dat_i, spr_dat_o, pic_wakeup, intr, // PIC Interface pic_int ); // // RISC Internal Interface // input clk; // Clock input rst; // Reset input spr_cs; // SPR CS input spr_write; // SPR Write input [31:0] spr_addr; // SPR Address input [31:0] spr_dat_i; // SPR Write Data output [31:0] spr_dat_o; // SPR Read Data output pic_wakeup; // Wakeup to the PM output intr; // interrupt // exception request // // PIC Interface // input [`OR1200_PIC_INTS-1:0] pic_int;// Interrupt inputs `ifdef OR1200_PIC_IMPLEMENTED // // PIC Mask Register bits (or no register) // `ifdef OR1200_PIC_PICMR reg [`OR1200_PIC_INTS-1:2] picmr; // PICMR bits `else wire [`OR1200_PIC_INTS-1:2] picmr; // No PICMR register `endif // // PIC Status Register bits (or no register) // `ifdef OR1200_PIC_PICSR reg [`OR1200_PIC_INTS-1:0] picsr; // PICSR bits `else wire [`OR1200_PIC_INTS-1:0] picsr; // No PICSR register `endif // // Internal wires & regs // wire picmr_sel; // PICMR select wire picsr_sel; // PICSR select wire [`OR1200_PIC_INTS-1:0] um_ints;// Unmasked interrupts reg [31:0] spr_dat_o; // SPR data out // // PIC registers address decoder // assign picmr_sel = (spr_cs && (spr_addr[`OR1200_PICOFS_BITS] == `OR1200_PIC_OFS_PICMR)) ? 1'b1 : 1'b0; assign picsr_sel = (spr_cs && (spr_addr[`OR1200_PICOFS_BITS] == `OR1200_PIC_OFS_PICSR)) ? 1'b1 : 1'b0; // // Write to PICMR // `ifdef OR1200_PIC_PICMR always @(posedge clk or `OR1200_RST_EVENT rst) if (rst == `OR1200_RST_VALUE) picmr <= {1'b1, {`OR1200_PIC_INTS-3{1'b0}}}; else if (picmr_sel && spr_write) begin picmr <= spr_dat_i[`OR1200_PIC_INTS-1:2]; end `else assign picmr = (`OR1200_PIC_INTS)'b1; `endif // // Write to PICSR, both CPU and external ints // `ifdef OR1200_PIC_PICSR always @(posedge clk or `OR1200_RST_EVENT rst) if (rst == `OR1200_RST_VALUE) picsr <= {`OR1200_PIC_INTS{1'b0}}; else if (picsr_sel && spr_write) begin picsr <= spr_dat_i[`OR1200_PIC_INTS-1:0] | um_ints; end else picsr <= picsr | um_ints; `else assign picsr = pic_int; `endif // // Read PIC registers // always @(spr_addr or picmr or picsr) case (spr_addr[`OR1200_PICOFS_BITS]) // synopsys parallel_case `ifdef OR1200_PIC_READREGS `OR1200_PIC_OFS_PICMR: begin spr_dat_o[`OR1200_PIC_INTS-1:0] = {picmr, 2'b11}; `ifdef OR1200_PIC_UNUSED_ZERO spr_dat_o[31:`OR1200_PIC_INTS] = {32-`OR1200_PIC_INTS{1'b0}}; `endif end `endif default: begin spr_dat_o[`OR1200_PIC_INTS-1:0] = picsr; `ifdef OR1200_PIC_UNUSED_ZERO spr_dat_o[31:`OR1200_PIC_INTS] = {32-`OR1200_PIC_INTS{1'b0}}; `endif end endcase // // Unmasked interrupts // assign um_ints = pic_int & {picmr, 2'b11}; // // Generate intr // assign intr = |um_ints; // // Assert pic_wakeup when intr is asserted // assign pic_wakeup = intr; `else // // When PIC is not implemented, drive all outputs as would when PIC is disabled // assign intr = pic_int[1] | pic_int[0]; assign pic_wakeup= intr; // // Read PIC registers // `ifdef OR1200_PIC_READREGS assign spr_dat_o[`OR1200_PIC_INTS-1:0] = `OR1200_PIC_INTS'b0; `ifdef OR1200_PIC_UNUSED_ZERO assign spr_dat_o[31:`OR1200_PIC_INTS] = 32-`OR1200_PIC_INTS'b0; `endif `endif `endif endmodule
Go to most recent revision | Compare with Previous | Blame | View Log