URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [orpsocv2/] [rtl/] [verilog/] [or1200/] [or1200_sb_fifo.v] - Rev 522
Go to most recent revision | Compare with Previous | Blame | View Log
////////////////////////////////////////////////////////////////////// //// //// //// OR1200's Store Buffer FIFO //// //// //// //// This file is part of the OpenRISC 1200 project //// //// http://www.opencores.org/cores/or1k/ //// //// //// //// Description //// //// Implementation of store buffer FIFO. //// //// //// //// To Do: //// //// - N/A //// //// //// //// Author(s): //// //// - Damjan Lampret, lampret@opencores.org //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2002 Authors and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // // CVS Revision History // // $Log: or1200_sb_fifo.v,v $ // Revision 2.0 2010/06/30 11:00:00 ORSoC // No update // // Revision 1.3 2002/11/06 13:53:41 simons // SB mem width fixed. // // Revision 1.2 2002/08/22 02:18:55 lampret // Store buffer has been tested and it works. BY default it is still disabled until uClinux confirms correct operation on FPGA board. // // Revision 1.1 2002/08/18 19:53:08 lampret // Added store buffer. // // // synopsys translate_off `include "timescale.v" // synopsys translate_on `include "or1200_defines.v" module or1200_sb_fifo( clk_i, rst_i, dat_i, wr_i, rd_i, dat_o, full_o, empty_o ); parameter dw = 68; parameter fw = `OR1200_SB_LOG; parameter fl = `OR1200_SB_ENTRIES; // // FIFO signals // input clk_i; // Clock input rst_i; // Reset input [dw-1:0] dat_i; // Input data bus input wr_i; // Write request input rd_i; // Read request output [dw-1:0] dat_o; // Output data bus output full_o; // FIFO full output empty_o;// FIFO empty // // Internal regs // reg [dw-1:0] mem [fl-1:0]; reg [dw-1:0] dat_o; reg [fw+1:0] cntr; reg [fw-1:0] wr_pntr; reg [fw-1:0] rd_pntr; reg empty_o; reg full_o; always @(posedge clk_i or `OR1200_RST_EVENT rst_i) if (rst_i == `OR1200_RST_VALUE) begin full_o <= 1'b0; empty_o <= 1'b1; wr_pntr <= {fw{1'b0}}; rd_pntr <= {fw{1'b0}}; cntr <= {fw+2{1'b0}}; dat_o <= {dw{1'b0}}; end else if (wr_i && rd_i) begin // FIFO Read and Write mem[wr_pntr] <= dat_i; if (wr_pntr >= fl-1) wr_pntr <= {fw{1'b0}}; else wr_pntr <= wr_pntr + 1'b1; if (empty_o) begin dat_o <= dat_i; end else begin dat_o <= mem[rd_pntr]; end if (rd_pntr >= fl-1) rd_pntr <= {fw{1'b0}}; else rd_pntr <= rd_pntr + 1'b1; end else if (wr_i && !full_o) begin // FIFO Write mem[wr_pntr] <= dat_i; cntr <= cntr + 1'b1; empty_o <= 1'b0; if (cntr >= (fl-1)) begin full_o <= 1'b1; cntr <= fl; end if (wr_pntr >= fl-1) wr_pntr <= {fw{1'b0}}; else wr_pntr <= wr_pntr + 1'b1; end else if (rd_i && !empty_o) begin // FIFO Read dat_o <= mem[rd_pntr]; cntr <= cntr - 1'b1; full_o <= 1'b0; if (cntr <= 1) begin empty_o <= 1'b1; cntr <= {fw+2{1'b0}}; end if (rd_pntr >= fl-1) rd_pntr <= {fw{1'b0}}; else rd_pntr <= rd_pntr + 1'b1; end endmodule
Go to most recent revision | Compare with Previous | Blame | View Log